What does the transport layer use as an addressing method to identify an application running on a host?

What does the transport layer use as an addressing method to identify an application running on a host?
by

1 Answer

Answer :

Port Number
by
selected by

Related questions

___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer

Description : ___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer

Last Answer : C. Network layer 

Which address is used to identify a process on a host by the transport layer? a) physical address b) logical address c) port address d) specific address

Description : Which address is used to identify a process on a host by the transport layer? a) physical address b) logical address c) port address d) specific address

Last Answer : c) port address

The ________is a three layer network protocol that contains addressing information and some control information that enables packets to be routed: a) User Datagram Protocol b) Internet Protocol c) Dynamic Host Configuration Protocol d) None of These

Description : The ________is a three layer network protocol that contains addressing information and some control information that enables packets to be routed: a) User Datagram Protocol b) Internet Protocol c) Dynamic Host Configuration Protocol d) None of These

Last Answer : b) Internet Protocol

What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model? a. Internet b. Host to host c. Network Access d. Application

Description : What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model? a. Internet b. Host to host c. Network Access d. Application

Last Answer : b. Host to host

In TCP/IP Reference model, the job of ............... layer is to permit hosts to inject packets into any network and travel them independently to the destination. (A) Physical (B) Transport (C) Application (D) Host-to-network

Description : In TCP/IP Reference model, the job of ............... layer is to permit hosts to inject packets into any network and travel them independently to the destination. (A) Physical (B) Transport (C) Application (D) Host-to-network

Last Answer : Answer: Marks to all

Which of the following is a transport layer protocol?a. stream control transmission protocol b. internet control message protocol c. neighbor discovery protocol d. dynamic host configuration protocol

Description : Which of the following is a transport layer protocol? a. stream control transmission protocol b. internet control message protocol c. neighbor discovery protocol d. dynamic host configuration protocol

Last Answer : a. stream control transmission protocol

Which of the following is a transport layer protocol? A. stream control transmission protocol B. internet control message protocol C. neighbor discovery protocol D. dynamic host configuration protocol

Description : Which of the following is a transport layer protocol? A. stream control transmission protocol B. internet control message protocol C. neighbor discovery protocol D. dynamic host configuration protocol

Last Answer : A. stream control transmission protocol

One of the responsibilities of the transport layer protocol is to create a ______ communication. A. host-to-host B. process-to-process C. node-to-node D. none of the above

Description : One of the responsibilities of the transport layer protocol is to create a ______ communication. A. host-to-host B. process-to-process C. node-to-node D. none of the above

Last Answer : B. process-to-process

The function of IP adress is …………………………………………. A. host identification B. network interface identification C. location addressing D. all of the above

Description : The function of IP adress is …………………………………………. A. host identification B. network interface identification C. location addressing D. all of the above

Last Answer : D. all of the above

An IP address serves which among the following principal functions: a) Host or network interface identification b) Location Addressing c) Both of Above d) None of These

Description : An IP address serves which among the following principal functions: a) Host or network interface identification b) Location Addressing c) Both of Above d) None of These

Last Answer : c) Both of Above

An IP address serves which among the following principal functions: a) Host or network interface identification b) Location Addressing c) Both of Above d) None of These

Description : An IP address serves which among the following principal functions: a) Host or network interface identification b) Location Addressing c) Both of Above d) None of These

Last Answer : c) Both of Above

Which layers of the OSI reference model are host-to-host layers ? (A) Transport, Session, Presentation, Application (B) Network, Transport, Session, Presentation (C) Data-link, Network, Transport, Session (D) Physical, Data-link, Network, Transport

Description : Which layers of the OSI reference model are host-to-host layers ? (A) Transport, Session, Presentation, Application (B) Network, Transport, Session, Presentation (C) Data-link, Network, Transport, Session (D) Physical, Data-link, Network, Transport

Last Answer : (A) Transport, Session, Presentation, Application

Which among the following is correct: a) Network firewalls are a software appliance running on general purpose hardware or hardware based firewall computer appliances that filter traffic between two or more networks. b) Host - based firewalls provide a layer of software on one host that controls network traffic in and out of that single machine c) Both of Above d) None of These

Description : Which among the following is correct: a) Network firewalls are a software appliance running on general purpose hardware or hardware based firewall computer appliances that filter traffic between two or more networks. b ... traffic in and out of that single machine c) Both of Above d) None of These

Last Answer : c) Both of Above

A ________ is a 16-bit number used by the host-to-host protocol to identify to which higher- level protocol or application program (process) it must deliver incoming messages A. connection B. UDP C. port D. TCP

Description : A ________ is a 16-bit number used by the host-to-host protocol to identify to which higher- level protocol or application program (process) it must deliver incoming messages A. connection B. UDP C. port D. TCP

Last Answer : C. port

To deliver a message to the correct application program running on a host, the _______ address must be consulted. A. IP B. MAC C. Port D. None of the mentioned

Description : To deliver a message to the correct application program running on a host, the _______ address must be consulted. A. IP B. MAC C. Port D. None of the mentioned

Last Answer : C. Port

A hardened firewall host on an intranet (i) has a proxy application gateway program running on it (ii)Allows specified internet users to access specified services in the intranet (iii) Initiates all internet activities requested by clients and monitors them (iv) prevents outsiders from accessing IP addresses within the intranet a. i, ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Description : A hardened firewall host on an intranet (i) has a proxy application gateway program running on it (ii)Allows specified internet users to access specified services in the intranet (iii) Initiates all internet activities requested by clients ... ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Last Answer : c. i, ii, iii, iv 

Which of the following addresses is used to deliver a message to the correct application program running on a host? (A) Port (B) IP (C) Logical (D) Physical

Description : Which of the following addresses is used to deliver a message to the correct application program running on a host? (A) Port (B) IP (C) Logical (D) Physical

Last Answer : (A) Port 

Transport layer can identify the symptoms of overload nodes using _________ a. Flow control b. Traffic control c. Byte orientation d. Data integrity

Description : Transport layer can identify the symptoms of overload nodes using _________ a. Flow control b. Traffic control c. Byte orientation d. Data integrity

Last Answer : b. Traffic control

Identify the important element a teacher has to take cognizance of while addressing students in a classroom. (A) Avoidance of proximity (B) Voice modulation (C) Repetitive pause (D) Fixed posture

Description : Identify the important element a teacher has to take cognizance of while addressing students in a classroom. (A) Avoidance of proximity (B) Voice modulation (C) Repetitive pause (D) Fixed posture

Last Answer : (B) Voice modulation

Identify direct addressing instructions from following instructions : (i) MOV RO, R5 (ii) MOV RO, 80 H (iii) MOV RO, #75H (iv) ADD A, 45 H

Description : Identify direct addressing instructions from following instructions : (i) MOV RO, R5 (ii) MOV RO, 80 H (iii) MOV RO, #75H (iv) ADD A, 45 H

Last Answer : Instructions ii) and iv) are direct addressing as 80H and 45H are direct addresses

Transmission media lie below the_______ layer. A) physical B) network C) transport D) application

Description : Transmission media lie below the_______ layer. A) physical B) network C) transport D) application

Last Answer : physical

Which of the following is not the layer of TCP/IP protocol? a. Application Layer b. Session Layer c. Transport Layer d. Internetwork layer

Description : Which of the following is not the layer of TCP/IP protocol? a. Application Layer b. Session Layer c. Transport Layer d. Internetwork layer

Last Answer : b. Session Layer

TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Description : TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Last Answer : A) Application

Which of the following protocols is an application layer protocol that establishes, manages and terminates multimedia sessions ? a. Session Maintenance Protocol b. Real - time Streaming Protocol c. Real - time Transport Control Protocol d. Session Initiation Protocol

Description : Which of the following protocols is an application layer protocol that establishes, manages and terminates multimedia sessions ? a. Session Maintenance Protocol b. Real - time Streaming Protocol c. Real - time Transport Control Protocol d. Session Initiation Protocol

Last Answer : d. Session Initiation Protocol

In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Description : In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Last Answer : a.Application layer

TELNET, FTP, SMTP, Protocols fall in the following layer of OSI reference model? a. Transport layer b. Internet layer c. Network layer d. Application layer

Description : TELNET, FTP, SMTP, Protocols fall in the following layer of OSI reference model? a. Transport layer b. Internet layer c. Network layer d. Application layer

Last Answer : d. Application layer

In which layer of OSI session is first check and then data is transmitted a. Application layer b. Presentation layer c. Session layer d. Transport layer

Description : In which layer of OSI session is first check and then data is transmitted a. Application layer b. Presentation layer c. Session layer d. Transport layer

Last Answer : c. Session layer

In which layer of OSI client send request to the server? a. Application layer b. Presentation layerc. Session layer d. Transport layer

Description : In which layer of OSI client send request to the server? a. Application layer b. Presentation layer c. Session layer d. Transport layer

Last Answer : c. Session layer

Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layerc. Transport layer d. Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layer c. Transport layer d. Link layer

Last Answer : b. Session layer

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : d. Session layer

Encryption and decryption are functions of which layer? a. transport b. session c. application d. presentation

Description : Encryption and decryption are functions of which layer? a. transport b. session c. application d. presentation

Last Answer : d. presentation

The _____ layer lies between the session layer and he application layer. a. network b. transport c. data link d. presentation

Description : The _____ layer lies between the session layer and he application layer. a. network b. transport c. data link d. presentation

Last Answer : d. presentation

The session layer lies between the ______layer and the presentation layer. a. network b. transport c. data link d. application

Description : The session layer lies between the ______layer and the presentation layer. a. network b. transport c. data link d. application

Last Answer : b. transport

Security based connection is provided by which layer? a. Network layer b. Session layer c. Application layer d. Transport layer

Description : Security based connection is provided by which layer? a. Network layer b. Session layer c. Application layer d. Transport layer

Last Answer : d. Transport layer

Transport layer protocols deals with _____ a. application to application communication b. process to process communication c. node to node communication d. man to man communication

Description : Transport layer protocols deals with _____ a. application to application communication b. process to process communication c. node to node communication d. man to man communication

Last Answer : b. process to process communication

Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

Transport layer protocols deals with _____ a. application to application communication b. process to process communication c. node to node communication d. man to man communication

Description : Transport layer protocols deals with _____ a. application to application communication b. process to process communication c. node to node communication d. man to man communication

Last Answer : b. process to process communication

Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

The network layer issues request to which layer? a. Transport layer b. Data layer c. Application layer d. Session layer

Description : The network layer issues request to which layer? a. Transport layer b. Data layer c. Application layer d. Session layer

Last Answer : b. Data layer

The network layer responds to request from which layer? a. Transport layer b. Data layer c. Application layer d. Session layer

Description : The network layer responds to request from which layer? a. Transport layer b. Data layer c. Application layer d. Session layer

Last Answer : a. Transport layer

.In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : .In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : a. Application layer

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : d. Session layer

Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layerc. Transport layer d. Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layer c. Transport layer d. Link layer

Last Answer : b. Session layer

Application layer is implemented in _______ a. End system b. NIC c. Ethernet d. Packet transport

Description : Application layer is implemented in _______ a. End system b. NIC c. Ethernet d. Packet transport

Last Answer : a. End system

SMTP is a protocol used in which layer? a. Application b. Network c. Physical d. Transport

Description : SMTP is a protocol used in which layer? a. Application b. Network c. Physical d. Transport

Last Answer : a. Application

The _______ layer is the topmost layer in the subnet. A. Network B. application C. transport D. physical

Description : The _______ layer is the topmost layer in the subnet. A. Network B. application C. transport D. physical

Last Answer : A. Network

Transport layer protocols deals with ____________ A. application to application communication B. process to process communication C. node to node communication D. man to man communication

Description : Transport layer protocols deals with ____________ A. application to application communication B. process to process communication C. node to node communication D. man to man communication

Last Answer : B. process to process communication

Transport layer aggregates data from different applications into a single stream before passing it to ____________ A. network layer B. data link layer C. application layer D. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ A. network layer B. data link layer C. application layer D. physical layer

Last Answer : A. network layer

HTTP is ________ protocol. a) application layer b) transport layer c) network layer d) data link layer

Description : HTTP is ________ protocol. a) application layer b) transport layer c) network layer d) data link layer

Last Answer : a) application layer