Transport layer can identify the symptoms of overload nodes using _________ a. Flow control b. Traffic control c. Byte orientation d. Data integrity

Transport layer can identify the symptoms
of overload nodes using _________
a. Flow control
b. Traffic control
c. Byte orientation
d. Data integrity
by

1 Answer

Answer :

b. Traffic control
by

Related questions

Buffer overrun can be reduced by using what? a. Traffic control b. Flow control c. Byte orientation d. Data integrity

Description : Buffer overrun can be reduced by using what? a. Traffic control b. Flow control c. Byte orientation d. Data integrity

Last Answer : b. Flow control

Using which method in transport layer data integrity can be ensured? a. Checksum b. Repetition codes c. Cyclic redundancy checks d. Error correcting codes

Description : Using which method in transport layer data integrity can be ensured? a. Checksum b. Repetition codes c. Cyclic redundancy checks d. Error correcting codes

Last Answer : a. Checksum

The _______ is used to provide integrity check, authentication, and encryption to IP datagram’s. A. UDP B. Transport layer C. ESP D. SSL

Description : The _______ is used to provide integrity check, authentication, and encryption to IP datagram’s. A. UDP B. Transport layer C. ESP D. SSL

Last Answer : C. ESP

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : d. Session layer

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : d. Session layer

The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Last Answer : a) network layer

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a) Application layerb) Transport layer c) Link layer d) Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a) Application layer b) Transport layer c) Link layer d) Session layer

Last Answer : d) Session layer

Using which layer in transport layer data integrity can be assured? A. Checksum B. Repetition codes C. Cyclic redundancy checks D. Error correction codes

Description : Using which layer in transport layer data integrity can be assured? A. Checksum B. Repetition codes C. Cyclic redundancy checks D. Error correction codes

Last Answer : A. Checksum 

A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP trafficc. stop incoming traffic from a specific IP address but allow outgoing traffic to the same IP address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Description : A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP traffic c. stop ... address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Last Answer : d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Description : The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Last Answer : d. All the above

The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Description : The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Last Answer : D. All the above

ICMP is a _________ layer protocol. A) datalink B) transport C) network D) noneof the above

Description : ICMP is a _________ layer protocol. A) datalink B) transport C) network D) noneof the above

Last Answer : network

Transport layer is implemented in _________ a. End system b. NIC c. Ethernet d. Signal transmission

Description : Transport layer is implemented in _________ a. End system b. NIC c. Ethernet d. Signal transmission

Last Answer : a. End system

In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer e. none of above

Description : In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer e. none of above

Last Answer : session layer

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received ... order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Last Answer : a. all UDP packets are treated independently by transport layer

The portion of physical layer that interfaces with the media access control sublayer is called ___________ a. physical signalling sublayer b. physical data sublayer c. physical address sublayer d. physical transport sublayer

Description : The portion of physical layer that interfaces with the media access control sublayer is called ___________ a. physical signalling sublayer b. physical data sublayer c. physical address sublayer d. physical transport sublayer

Last Answer : a. physical signalling sublayer

In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer

Description : In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer

Last Answer : a. session layer

Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Description : Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Last Answer : A. receive sliding window.

Transport layer receives data in the form of? A. Packets B. Byte streams C. Bits stream D. both packet and Byte stream

Description : Transport layer receives data in the form of? A. Packets B. Byte streams C. Bits stream D. both packet and Byte stream

Last Answer : B. Byte streams 

Which address is used to identify a process on a host by the transport layer? a) physical address b) logical address c) port address d) specific address

Description : Which address is used to identify a process on a host by the transport layer? a) physical address b) logical address c) port address d) specific address

Last Answer : c) port address

The layer that transmits data in the form of bit streams using electrical and mechanicalsystems is in the OSI model. a. Physical layer b. Transport Layer c. Network Layer d. Data Link Layer

Description : The layer that transmits data in the form of bit streams using electrical and mechanicalsystems is in the OSI model. a. Physical layer b. Transport Layer c. Network Layer d. Data Link Layer

Last Answer : a. Physical layer

Congestion control can control traffic entry into a telecommunications network, so to avoid _________ a. Congestive connection b. Connection collapse c. Congestive collapse d. Collapse congestive

Description : Congestion control can control traffic entry into a telecommunications network, so to avoid _________ a. Congestive connection b. Connection collapse c. Congestive collapse d. Collapse congestive

Last Answer : c. Congestive collapse

High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

A name or number used to identify a storage location devices? a. A byte b. A record c. An address d. All of above

Description : A name or number used to identify a storage location devices? a. A byte b. A record c. An address d. All of above

Last Answer : An address

Data integrity control A. is used to set upper and lower limits on numeric data B. requires the use of passwords toprohibit unauthorized access tothe file C. has the data dictionary keep thedate and time of lastaccess last back-up,and most recent modificationfor all files D. All of theabove E. None of the above

Description : Data integrity control A. is used to set upper and lower limits on numeric data B. requires the use of passwords toprohibit unauthorized access tothe file C. has the data dictionary keep thedate and time ... back-up,and most recent modificationfor all files D. All of theabove E. None of the above

Last Answer : has the data dictionary keep thedate and time of lastaccess last back-up,and most recent modificationfor all files

Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Description : Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Last Answer : c. Both a & b

Which of the following protocols is an application layer protocol that establishes, manages and terminates multimedia sessions ? a. Session Maintenance Protocol b. Real - time Streaming Protocol c. Real - time Transport Control Protocol d. Session Initiation Protocol

Description : Which of the following protocols is an application layer protocol that establishes, manages and terminates multimedia sessions ? a. Session Maintenance Protocol b. Real - time Streaming Protocol c. Real - time Transport Control Protocol d. Session Initiation Protocol

Last Answer : d. Session Initiation Protocol

Which services are provided by transport layer? a. Error control b. Connection service c. Connection less service d. Congestion control

Description : Which services are provided by transport layer? a. Error control b. Connection service c. Connection less service d. Congestion control

Last Answer : a. Error control

What are the functions of the transport layer? a. Multiplexing/ Demultiplexing b. Connection less Services c. Connection oriented service d. Congestion control

Description : What are the functions of the transport layer? a. Multiplexing/ Demultiplexing b. Connection less Services c. Connection oriented service d. Congestion control

Last Answer : a. Multiplexing/ Demultiplexing

Which of the following is a transport layer protocol?a. stream control transmission protocol b. internet control message protocol c. neighbor discovery protocol d. dynamic host configuration protocol

Description : Which of the following is a transport layer protocol? a. stream control transmission protocol b. internet control message protocol c. neighbor discovery protocol d. dynamic host configuration protocol

Last Answer : a. stream control transmission protocol

State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and UDP. 3). SCTP is a new reliable, message oriented transport layer protocol. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and ... , 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : D. 1.false, 2. true, 3. true

Which of the following is a transport layer protocol? A. stream control transmission protocol B. internet control message protocol C. neighbor discovery protocol D. dynamic host configuration protocol

Description : Which of the following is a transport layer protocol? A. stream control transmission protocol B. internet control message protocol C. neighbor discovery protocol D. dynamic host configuration protocol

Last Answer : A. stream control transmission protocol

In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Description : In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Last Answer : network layer

Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Description : Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Last Answer : physical

The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : network

The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : physical and data link

The layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Description : The layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Last Answer : A) Physical

The..............layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation

Description : The..............layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation

Last Answer : A) Physical

In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Description : In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Last Answer : a.Application layer

In which layer of OSI session is first check and then data is transmitted a. Application layer b. Presentation layer c. Session layer d. Transport layer

Description : In which layer of OSI session is first check and then data is transmitted a. Application layer b. Presentation layer c. Session layer d. Transport layer

Last Answer : c. Session layer

Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layerc. Transport layer d. Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layer c. Transport layer d. Link layer

Last Answer : b. Session layer

The _______ layer ensures interoperability between communicating devices through transformation of data into a mutually agreed upon format. a. network b. presentation c. transport d. data link

Description : The _______ layer ensures interoperability between communicating devices through transformation of data into a mutually agreed upon format. a. network b. presentation c. transport d. data link

Last Answer : b. presentation

The _____ layer lies between the session layer and he application layer. a. network b. transport c. data link d. presentation

Description : The _____ layer lies between the session layer and he application layer. a. network b. transport c. data link d. presentation

Last Answer : d. presentation

The session layer lies between the ______layer and the presentation layer. a. network b. transport c. data link d. application

Description : The session layer lies between the ______layer and the presentation layer. a. network b. transport c. data link d. application

Last Answer : b. transport

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Last Answer : a. all UDP packets are treated independently by transport layer

Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

The network layer issues request to which layer? a. Transport layer b. Data layer c. Application layer d. Session layer

Description : The network layer issues request to which layer? a. Transport layer b. Data layer c. Application layer d. Session layer

Last Answer : b. Data layer

The network layer responds to request from which layer? a. Transport layer b. Data layer c. Application layer d. Session layer

Description : The network layer responds to request from which layer? a. Transport layer b. Data layer c. Application layer d. Session layer

Last Answer : a. Transport layer

.In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : .In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : a. Application layer