What is the opposition to current flow in an AC circuit caused by an inductor called?

What is the opposition to current flow in an AC circuit caused by an inductor called?
by

1 Answer

Answer :

Need answer
by
selected by

Related questions

What is the term for the opposition an inductor presents to ac?

Description : What is the term for the opposition an inductor presents to ac?

Last Answer : Inductive reactance.

Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. C. Inductive reactance varies directly with the frequency and the inductance. D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Description : Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. ... . D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Last Answer : Answer: C

To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Description : To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Last Answer : Answer: A

What term is given to total opposition to ac in a circuit?

Description : What term is given to total opposition to ac in a circuit?

Last Answer : Impedance

In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a fashion that the reactance of the inductor meausers `15

Description : In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a fashion that the reactance of the inductor meausers `15

Last Answer : In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a ... the series combination of `L` and `C`will be:

The potentiak difference across a 2H inductor as a function of time is shown in the figure. At time t=0, current is zero. Current versus time graph ac

Description : The potentiak difference across a 2H inductor as a function of time is shown in the figure. At time t=0, current is zero. Current versus time graph ac

Last Answer : The potentiak difference across a 2H inductor as a function of time is shown in the figure. At time t=0, ... across the inductor will be A. B. C. D.

Describe the operation of inductor with sinusoidal AC voltage as input. Draw waveform for voltage across and current through the inductor. Draw its phasor representation.

Description : Describe the operation of inductor with sinusoidal AC voltage as input. Draw waveform for voltage across and current through the inductor. Draw its phasor representation.

Last Answer : An alternating voltage is applied to a purely inductive coil, a back e.m.f. is produced due to self-inductance of the coil. The back e.m.f. at every step, opposes the rise of fall of current through the coil ... drop, the applied voltage has to overcome this self induced e.m.f. only.

What effect does an increase in capacitance have on a capacitor’s opposition to current flow?

Description : What effect does an increase in capacitance have on a capacitor’s opposition to current flow?

Last Answer : Opposition to current flow decreases.

The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Description : The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Last Answer : Answer: A

Is the current flow through an inductor directly proportional or inversely proportional to its inductance value?

Description : Is the current flow through an inductor directly proportional or inversely proportional to its inductance value?

Last Answer : Directly proportional.

What is the term for the opposition that a capacitor presents to ac?

Description : What is the term for the opposition that a capacitor presents to ac?

Last Answer : Capacitive reactance.

In the circuit shown in figure switch S is closed at time t=0 At what time current through `3Omega` resistance and 1H inductor are equal?

Description : In the circuit shown in figure switch S is closed at time t=0 At what time current through `3Omega` resistance and 1H inductor are equal?

Last Answer : In the circuit shown in figure switch S is closed at time t=0 At what time current through `3Omega` resistance and ... 5)/(3))` D. `Insqrt((8)/(3))`

A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Description : A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Last Answer : ANSWER: X -- CURRENT WILL LAG BY 26 DEGREES.

In the circuit shown below, the current through the inductor is,

Description : In the circuit shown below, the current through the inductor is,

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Description : Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Last Answer : hay bridge

In the flow of one cycle of single phase AC current past any given point in a circuit, the maximum current peak occurs _____________. A. one time B. two times C. three times D. four times

Description : In the flow of one cycle of single phase AC current past any given point in a circuit, the maximum current peak occurs _____________. A. one time B. two times C. three times D. four times

Last Answer : Answer: B

Capacitance in an AC circuit will _____________. A. stop current flow once the capacitor is fully charged B. allow current flow in only one direction C. oppose any change in circuit voltage D. rectify the current

Description : Capacitance in an AC circuit will _____________. A. stop current flow once the capacitor is fully charged B. allow current flow in only one direction C. oppose any change in circuit voltage D. rectify the current

Last Answer : Answer: C

When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only and a low resistance meter for DC measurements C. whenever a low impedance meter is not available, regardless of the components being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Description : When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only ... being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Last Answer : Answer: D

The opposition to the establishment of magnetic lines of force in a magnetic circuit is called the circuit's _______. A. resistance B. reluctance C. impedance D. inductance

Description : The opposition to the establishment of magnetic lines of force in a magnetic circuit is called the circuit's _______. A. resistance B. reluctance C. impedance D. inductance

Last Answer : Answer: B

An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`

Description : An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`

Last Answer : An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`

When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Description : When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Last Answer : D. Antenna resonant frequency increases

What is the term for the number of times per second that tank circuit energy is either stored in the inductor or capacitor?

Description : What is the term for the number of times per second that tank circuit energy is either stored in the inductor or capacitor?

Last Answer : Natural frequency or resonant frequency (f r).

When the magnetic field of the inductor is completely collapsed, where is the energy of the tank circuit stored?

Description : When the magnetic field of the inductor is completely collapsed, where is the energy of the tank circuit stored?

Last Answer : . Capacitor.

In an a.c. circuit that contains both an inductor and a capacitor, what term is used for the difference between the individual reactances?

Description : In an a.c. circuit that contains both an inductor and a capacitor, what term is used for the difference between the individual reactances?

Last Answer : Resultant reactance.

A series inductor is normally added in a thyrister circuit for achieving protection against:

Description : A series inductor is normally added in a thyrister circuit for achieving protection against:

Last Answer : A series inductor is normally added in a thyrister circuit for achieving protection against: high di/dt

A reading of 120 is obtained when a standard inductor was connected in the circuit of a Q-meter and the

Description : A reading of 120 is obtained when a standard inductor was connected in the circuit of a Q-meter and the variable capacitor is adjusted to a value of 300 pF. A lossless capacitor of unknown value Cx is then connected in ... value of 200 pF. The value of Cx in pF is  A) 100 B) 200 C) 300 D) 500

Last Answer : A reading of 120 is obtained when a standard inductor was connected in the circuit of a Q-meter and the variable capacitor is adjusted to a value of 300 pF. A lossless capacitor of unknown value Cx is ... when the variable capacitor is readjusted to a value of 200 pF. The value of Cx in pF is 100 

When a pure inductor is connected in series with a lamp circuit, effect is: -

Description : When a pure inductor is connected in series with a lamp circuit, effect is: -  a) Dimmer b) Brighter c) Same d) Fused

Last Answer : When a pure inductor is connected in series with a lamp circuit, effect is: -  Dimmer 

Voltage failure of an AC generator may be caused by ____________. A. failure of the exciter generator B. a tripped bus circuit breaker C. high mica segments on the stator bus bar D. excessive prime mover speed

Description : Voltage failure of an AC generator may be caused by ____________. A. failure of the exciter generator B. a tripped bus circuit breaker C. high mica segments on the stator bus bar D. excessive prime mover speed

Last Answer : Answer: A

Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Description : Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Last Answer : Answer: C

The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. Total flux linked with the inductor at

Description : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. Total flux linked with the inductor at

Last Answer : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. ... 10 Wb B. 20 Wb C. 30 Wb D. 40 Wb

The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. The self inductance of the indicator i

Description : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. The self inductance of the indicator i

Last Answer : The current in ampere through an inductor is i(10+20t) Here t is in second. The induced emf in the inductor 4V. The ... B. `0.4` C. `0.1` D. `1.0`

The potential difference across a `2 H` inductor as a function of time is shown in figure. At time `t=0`, current is zero Current `t = 2` second is

Description : The potential difference across a `2 H` inductor as a function of time is shown in figure. At time `t=0`, current is zero Current `t = 2` second is

Last Answer : The potential difference across a `2 H` inductor as a function of time is shown in figure. At time `t=0`, current is ... B. `3 A` C. `4 A` D. `5 A`

As shown in the illustration, the generator field is excited with DC current provided by ____________. EL-0016 A. conductors '1', '2' and '3' B. inductor 'L1' C. rectifier 'CR1' D. winding 'S-2'

Description : As shown in the illustration, the generator field is excited with DC current provided by ____________. EL-0016 A. conductors '1', '2' and '3' B. inductor 'L1' C. rectifier 'CR1' D. winding 'S-2'

Last Answer : Answer: C

A component that allows only unidirectional current to pass through it is A. resistor B. inductor C. transformer D. diode

Description : A component that allows only unidirectional current to pass through it is A. resistor B. inductor C. transformer D. diode

Last Answer : diode

Find the power of an inductor of 5H and current 4.5A after 2 seconds. a) 25.31 b) 50.62 c) 102.4 d) 204.8

Description : Find the power of an inductor of 5H and current 4.5A after 2 seconds. a) 25.31 b) 50.62 c) 102.4 d) 204.8

Last Answer : a) 25.31

Find the work done in an inductor of 4H when a current 8A is passed through it? a) 256 b) 128 c) 64 d) 512

Description : Find the work done in an inductor of 4H when a current 8A is passed through it? a) 256 b) 128 c) 64 d) 512

Last Answer : b) 128

Find the induced EMF in an inductor of 2mH and the current rate is 2000 units. a) 4 b) -4 c) 1 d) -1

Description : Find the induced EMF in an inductor of 2mH and the current rate is 2000 units. a) 4 b) -4 c) 1 d) -1

Last Answer : b) -4

The energy stored in an inductor 2H and current 4A is a) 4 b) 8 c) 12 d) 16

Description : The energy stored in an inductor 2H and current 4A is a) 4 b) 8 c) 12 d) 16

Last Answer : d) 16

The energy stored in the inductor 100mH with a current of 2A is a) 0.2 b) 0.4 c) 0.6 d) 0.8 View Ans

Description : The energy stored in the inductor 100mH with a current of 2A is a) 0.2 b) 0.4 c) 0.6 d) 0.8 View Ans

Last Answer : a) 0.2

What is the phase relationship between current and voltage in an inductor?

Description : What is the phase relationship between current and voltage in an inductor?

Last Answer : Current lags voltage by 90° (ELI).

What effect does an inductor have on a change in current?

Description : What effect does an inductor have on a change in current?

Last Answer : An inductor opposes a change in current.

Why inductor current lags inductor voltage ?

Description : Why inductor current lags inductor voltage ?

Last Answer : Inductor is a wire wounding structure having a core material it induces emf which is opposite to the voltage supply and proportional to rate of change of current so current lags the voltage in inductor

why is it that when the frequency of a voltage in an inductor increases current decreases?

Description : A sine wave voltage is applied across an inductor. When the frequency of the voltage is decreased, the current decreases.

Last Answer : The question seems to be wrong. Increase in frequency would actually decrease the current through the Inductor. This happens because inductive reactance Xl is directly proportional to frequency. And if frequency increases the value of Xl would ... vice versa. Xl= 2*pi*f*L I=E/Z Z=sqrt(R^2+Xl^2)

A loud buzzing noise in an AC controller is probably caused by _____________. A. poor contact with the overload relay B. an incorrectly sized heater C. a broken shading coil D. abnormal starting current

Description : A loud buzzing noise in an AC controller is probably caused by _____________. A. poor contact with the overload relay B. an incorrectly sized heater C. a broken shading coil D. abnormal starting current

Last Answer : Answer: C

The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the bearings C. strictly converted to heat generated by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Description : The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the ... by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Last Answer : Answer: A

When measuring AC current flow, you must always connect the meter _____________. A. in series with the power source and load B. in parallel with the power source and load C. insuring correct polarity D. using the lowest range possible to prevent instrument damage

Description : When measuring AC current flow, you must always connect the meter _____________. A. in series with the power source and load B. in parallel with the power source and load C. insuring correct polarity D. using the lowest range possible to prevent instrument damage

Last Answer : Answer: A

The device in figure 'B' shown in the illustration can be used to control an AC load yet maintain its high gain by ______________. EL-0091 A. connecting the load to the output side of the bridge B. reversing the current flow through the control winding C. connecting the load to the input side of the bridge D. reversing the current flow through the bias winding

Description : The device in figure 'B' shown in the illustration can be used to control an AC load yet maintain its high gain by ______________. EL-0091 A. connecting the load to the output side of the ... connecting the load to the input side of the bridge D. reversing the current flow through the bias winding

Last Answer : Answer: C

What type of current would flow through the load in figure 'B' shown in the illustration? EL-0091 A. AC only B. DC only C. AC or DC depending on control winding polarity D. AC or DC depending on instantaneous polarity of the source

Description : What type of current would flow through the load in figure 'B' shown in the illustration? EL-0091 A. AC only B. DC only C. AC or DC depending on control winding polarity D. AC or DC depending on instantaneous polarity of the source

Last Answer : Answer: B

When used for ac current control, during which alternation of the ac cycle does the TRIAC control current flow?

Description : When used for ac current control, during which alternation of the ac cycle does the TRIAC control current flow?

Last Answer : During both alternations.

Instantaneous voltage and instantaneoss current in an L-R circuit in AC is V=100sin (100)t and `i=10sin(100t-pi//4)`. Match the following table, `{:(,

Description : Instantaneous voltage and instantaneoss current in an L-R circuit in AC is V=100sin (100)t and `i=10sin(100t-pi//4)`. Match the following table, `{:(,

Last Answer : Instantaneous voltage and instantaneoss current in an L-R circuit in AC is V=100sin (100)t and `i=10sin(100t ... power in one cycle",(S),"None"):}`