When a pure inductor is connected in series with a lamp circuit, effect is: -

When a pure inductor is connected in series with a lamp circuit, effect is: - 

a) Dimmer b) Brighter c) Same d) Fused
by

1 Answer

Answer :

When a pure inductor is connected in series with a lamp circuit, effect is: -  Dimmer 

by

Related questions

When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Description : When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Last Answer : D. Antenna resonant frequency increases

What is the phase angle of an ohm inductor in series with an ohm resistor connected to a 5 KHz source?

Description : What is the phase angle of an ohm inductor in series with an ohm resistor connected to a 5 KHz source?

Last Answer : You need to provide values of resistor and inductor etc to find the phase angle.

An inductor is connected in series with SCR to protect it from

Description : An inductor is connected in series with SCR to protect it from A) Excessive high voltage B) Excessive high dv/dt C) Excessive high di/dt D) Excessive large forward current 

Last Answer : An inductor is connected in series with SCR to protect it from Excessive high di/dt

An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor

Description : An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor of the circuit is :  (A) 100/11 (B) 11/100 (C) 110 (D) 1000

Last Answer : An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor of the circuit is : 100/11

A reading of 120 is obtained when a standard inductor was connected in the circuit of a Q-meter and the

Description : A reading of 120 is obtained when a standard inductor was connected in the circuit of a Q-meter and the variable capacitor is adjusted to a value of 300 pF. A lossless capacitor of unknown value Cx is then connected in ... value of 200 pF. The value of Cx in pF is  A) 100 B) 200 C) 300 D) 500

Last Answer : A reading of 120 is obtained when a standard inductor was connected in the circuit of a Q-meter and the variable capacitor is adjusted to a value of 300 pF. A lossless capacitor of unknown value Cx is ... when the variable capacitor is readjusted to a value of 200 pF. The value of Cx in pF is 100 

In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a fashion that the reactance of the inductor meausers `15

Description : In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a fashion that the reactance of the inductor meausers `15

Last Answer : In a series `LCR` circuit the frequency of a `10 V`, `AC` voltage soure is adjusted in such a ... the series combination of `L` and `C`will be:

To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Description : To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Last Answer : Answer: A

A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Description : A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Last Answer : ANSWER: X -- CURRENT WILL LAG BY 26 DEGREES.

A series inductor is normally added in a thyrister circuit for achieving protection against:

Description : A series inductor is normally added in a thyrister circuit for achieving protection against:

Last Answer : A series inductor is normally added in a thyrister circuit for achieving protection against: high di/dt

The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : -

Description : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - a) 225 MHz b) 1.06 MHz c) 10 KHz d) 10 MHz

Last Answer : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - 10 KHz

Which of these represent short in a series circuit?

Description :  Which of these represent short in a series circuit?  a) Increase in resistance b) Increase in current c) Increase in voltage d) Increase in conductance

Last Answer :  Which of these represent short in a series circuit?  Increase in current

What current is required to light two 75 watt lamps and one 40 watt lamp when connected in series to a 120 volt power source? A. 0.161 amperes B. 0.631 amperes C. 1.583 amperes D. 6.199 amperes

Description : What current is required to light two 75 watt lamps and one 40 watt lamp when connected in series to a 120 volt power source? A. 0.161 amperes B. 0.631 amperes C. 1.583 amperes D. 6.199 amperes

Last Answer : Answer: C

If 200w, 100 w and 60 w lamps connected in series with 230V AC , which lamp glow brighter? Each lamp voltage rating is 230V.

Description : If 200w, 100 w and 60 w lamps connected in series with 230V AC , which lamp glow brighter? Each lamp voltage rating is 230V.

Last Answer :  Each bulb when independently working will have currents (W/V= I)  For 200 Watt Bulb current (I200) =200/230=0.8696 A  For 100 Watt Bulb current (I100) =100/230=0.4348 A  ... current through it. So minimum power dissipated across it as min current X equal Voltage across =s min power dissipation

Four lamps are connected in parallel in a single circuit. If one of the lamp burns out, the others will _____________. A. all go out B. become dimmer C. burn with their original intensities D. become brighter

Description : Four lamps are connected in parallel in a single circuit. If one of the lamp burns out, the others will _____________. A. all go out B. become dimmer C. burn with their original intensities D. become brighter

Last Answer : Answer: C

A pure inductor has power factor of

Description : A pure inductor has power factor of   (a) 1 (b) 1/ 2 (c) 0 (d) None of these 

Last Answer : Zero The current lags behind voltage by 90 degrees in case of a pure inductor  Therefore the power factor = cos{angle between voltage and current}  = cos(90) = 0

Power factor of a pure inductor is

Last Answer : Power factor of a pure inductor is Zero.

A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then connected across an inductor of inductance `0.6mH` What is th

Description : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then connected across an inductor of inductance `0.6mH` What is th

Last Answer : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then ... potential difference across the capacitor is `6.0V` ?

Moving coil in dynamometer wattmeter connected : -

Description :  Moving coil in dynamometer wattmeter connected : - a) in series with fixed coil b) across supply c) in series with load d) across load

Last Answer : Moving coil in dynamometer wattmeter connected : - across supply

Why is a lava lamp an exeample of pure substance?

Description : Why is a lava lamp an exeample of pure substance?

Last Answer : What is the answer ?

The most inefficient method of voltage reduction, from the standpoint of power loss, even when placed in series with the load, is the use of a/an ____________. A. capacitor B. inductor C. resistor D. transistor

Description : The most inefficient method of voltage reduction, from the standpoint of power loss, even when placed in series with the load, is the use of a/an ____________. A. capacitor B. inductor C. resistor D. transistor

Last Answer : Answer: C

The most inefficient method of voltage reduction from the stand point of power loss, is a/an _____________. A. capacitor in series with the load B. inductor in series with the load C. capacitor and inductor in series with the load D. resistor in series with the load

Description : The most inefficient method of voltage reduction from the stand point of power loss, is a/an _____________. A. capacitor in series with the load B. inductor in series with the load C. capacitor and inductor in series with the load D. resistor in series with the load

Last Answer : Answer: D

Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Description : Increasing the resonant frequency of an end-fed Marconi antenna can be done by A. adding a capacitor in series and reducing the physical length B. adding an inductor in series C. adding an inductor in series D. All of these

Last Answer : A. adding a capacitor in series and reducing the physical length

To electrically decrease the length of an antenna. A. add an inductor in series B. add an inductor in parallel C. add a resistor in series D. add a capacitor in series

Description : To electrically decrease the length of an antenna. A. add an inductor in series B. add an inductor in parallel C. add a resistor in series D. add a capacitor in series

Last Answer : D. add a capacitor in series

Increasing the electrical length of an antenna means A. add an inductor in parallel B. add a capacitor in series C. add an inductor series D. add a resistor is series

Description : Increasing the electrical length of an antenna means A. add an inductor in parallel B. add a capacitor in series C. add an inductor series D. add a resistor is series

Last Answer : C. add an inductor series

How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna

Description : How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna

Last Answer : D. By connecting an inductor in series with the antenna

Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Description : Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Last Answer : D. loading coil

State the advantages and disadvantages of series inductor and shunt capacitor filter.

Description : State the advantages and disadvantages of series inductor and shunt capacitor filter.

Last Answer : Advantages of series inductor filter 1. It has low ripple factor at heavy load currents (i.e. low load resistance) 2. It has no surge current through the diode. 3. It reduces the ripple in the DC ... . 3. It has low output voltages for heavy loads. 4. Ripple factor is dependent on the load.

Explain operation of series inductor filter and find out its ripple factor.

Description : Explain operation of series inductor filter and find out its ripple factor.

Last Answer : Circuit diagram of series inductor filter :  Operation of Series Inductor Filter : A high value of inductor is connected in series with load. Then the combination is connected across the rectifier. ... Hence increase in current reduces ripple factor. Ripple Factor:- RF = R / 3√2 ω L

What is the reactance property at the input of a shorted quarter wavelength line? A. A parallel LC circuit B. A pure inductive reactance C. A series LC circuit D. A pure capacitive reactance

Description : What is the reactance property at the input of a shorted quarter wavelength line? A. A parallel LC circuit B. A pure inductive reactance C. A series LC circuit D. A pure capacitive reactance

Last Answer : A. A parallel LC circuit

With a 12 V supply, a silicon diode, and a 370 - ohm resistor in series, what voltage will be dropped across...

Description : With a 12 V supply, a silicon diode, and a 370 - ohm resistor in series, what voltage will be dropped across the diode? a) 0.3V b) 0.7V c) 0.9V d) 1.4V

Last Answer : 0.7V

The purpose of the series quadrature windings in an Amplidyne -

Description : The purpose of the series quadrature windings in an Amplidyne -  a) Neutralize the effect of Armature Reaction b) Reduce commutation difficulties c) Increase the gain d) Increase the response time

Last Answer : The purpose of the series quadrature windings in an Amplidyne - Increase the gain 

In the circuit shown in figure switch S is closed at time t=0 At what time current through `3Omega` resistance and 1H inductor are equal?

Description : In the circuit shown in figure switch S is closed at time t=0 At what time current through `3Omega` resistance and 1H inductor are equal?

Last Answer : In the circuit shown in figure switch S is closed at time t=0 At what time current through `3Omega` resistance and ... 5)/(3))` D. `Insqrt((8)/(3))`

An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`

Description : An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`

Last Answer : An L-C circuit contains a 0.60 H inductor and a `25muF` capacitor is `3.0xx10^(-5)C?`

What is the opposition to current flow in an AC circuit caused by an inductor called?

Description : What is the opposition to current flow in an AC circuit caused by an inductor called?

Last Answer : Need answer

What is the term for the number of times per second that tank circuit energy is either stored in the inductor or capacitor?

Description : What is the term for the number of times per second that tank circuit energy is either stored in the inductor or capacitor?

Last Answer : Natural frequency or resonant frequency (f r).

When the magnetic field of the inductor is completely collapsed, where is the energy of the tank circuit stored?

Description : When the magnetic field of the inductor is completely collapsed, where is the energy of the tank circuit stored?

Last Answer : . Capacitor.

In an a.c. circuit that contains both an inductor and a capacitor, what term is used for the difference between the individual reactances?

Description : In an a.c. circuit that contains both an inductor and a capacitor, what term is used for the difference between the individual reactances?

Last Answer : Resultant reactance.

In the circuit shown below, the current through the inductor is,

Description : In the circuit shown below, the current through the inductor is,

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

What effect does an inductor have on a change in current?

Description : What effect does an inductor have on a change in current?

Last Answer : An inductor opposes a change in current.

What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp?

Description : What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp? (A) 5000 amp (B) 1000 amp (C) 400 amp (D) 800 amp 

Last Answer : What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp? (A) 5000 amp (B) 1000 amp (C) 400 amp (D) 800 amp 

A 0 -10 mAPMMC ammeter reads 5 mA in a circuit; its bottom control spring snaps out suddenly the meter ...

Description :  A 0 -10 mAPMMC ammeter reads 5 mA in a circuit; its bottom control spring snaps out suddenly the meter will now read:- a) 5 mA b) 10 mA c) 2.5 mA d). 0

Last Answer :  A 0 -10 mAPMMC ammeter reads 5 mA in a circuit; its bottom control spring snaps out suddenly the meter will now read:- 0

When measuring strain, ballast circuit use a capacitor to act as a high pass filter. This is done when:

Description : When measuring strain, ballast circuit use a capacitor to act as a high pass filter. This is done when:  a) Static strain are being measured b) Dynamic strain are being measured c) Both Static and dynamic strain are being measured d) None of the above

Last Answer : When measuring strain, ballast circuit use a capacitor to act as a high pass filter. This is done when: Dynamic strain are being measured

A flasher circuit application is a : -

Description : A flasher circuit application is a : -  a) Safety blinkers for bicycles c) Street Light Control  b) Rides lighting d) Glow lamp

Last Answer : A flasher circuit application is a : - Safety blinkers for bicycles 

Which of the following statements is true if a 100 watt lamp and a 75 watt lamp are connected in parallel across a 100 volt power supply? A. The 75 watt lamp will draw as much current as the 100 watt lamp. B. The 100 watt lamp will have a greater resistance. C. Current flow will be the same across each lamp. D. The 75 watt lamp will have a higher resistance.

Description : Which of the following statements is true if a 100 watt lamp and a 75 watt lamp are connected in parallel across a 100 volt power supply? A. The 75 watt lamp will draw as much current as the 100 ... Current flow will be the same across each lamp. D. The 75 watt lamp will have a higher resistance.

Last Answer : Answer: D

If one lamp is connected between two phases will it glow or not?

Description : If one lamp is connected between two phases will it glow or not?

Last Answer : A:If the voltage between the two phase is equal to the lamp voltage then the lamp will glow. When the voltage difference is big it will damage the lamp and when the difference is smaller the lamp will glow depending on the type of lamp.

Three lamps are connected in parallel across a 120 Volt source. If one lamp burns out, the remaining two will ...

Description : Three lamps are connected in parallel across a 120 Volt source. If one lamp burns out, the remaining two will be: A. Glow dimmer B. Glow brighter C. Not light D. Glow with the same brightness as before

Last Answer : Glow with the same brightness as before 

Loading effect is principally caused by instruments

Description : Loading effect is principally caused by instruments   (a) High resistance (b) Low sensitivity (c) High sensitivity (d) High range

Last Answer : B

Assertion : If by mistake, a voltmeter is connected in series, then circuit will burn. Reason : Current will drastically decrease in the circuit.

Description : Assertion : If by mistake, a voltmeter is connected in series, then circuit will burn. Reason : Current will drastically decrease in the circuit.

Last Answer : Assertion : If by mistake, a voltmeter is connected in series, then circuit will burn. Reason : ... D. If Assertion is false but Reason is true.

Two resistors `400Omega` and `800Omega` are connected in series with a `6V` battery. It is desired to measure the current in the circuit. An ammeter o

Description : Two resistors `400Omega` and `800Omega` are connected in series with a `6V` battery. It is desired to measure the current in the circuit. An ammeter o

Last Answer : Two resistors `400Omega` and `800Omega` are connected in series with a `6V` battery. It is desired to measure the current ... .95` V C. `3.8` V D. 4 V

By mistake, a voltmeter is connected in series and an ammeter is connected in parallel, with a resistance in an electrical circuit. What will happen t

Description : By mistake, a voltmeter is connected in series and an ammeter is connected in parallel, with a resistance in an electrical circuit. What will happen t

Last Answer : By mistake, a voltmeter is connected in series and an ammeter is connected in parallel, with a ... be damaged D. Only the voltmeter will be damaged