The minimum torsional strain developed in butane is at dihedral angle (s)

The minimum torsional strain developed in butane is at dihedral angle (s)
by

1 Answer

Answer :

The minimum torsional strain developed in butane is at dihedral angle (s) A. `0^(º), 108^(º)` B. `120^(@), 240^ ... (@)` D. `60^(@), 120^(@), 180^(@)`
by
selected by

Related questions

Which of the following is associated with Torsional strain?

Description : Which of the following is associated with Torsional strain?

Last Answer : Which of the following is associated with Torsional strain? A. Repulsion between bond pair of ... Bond angle strain D. Attraction of opposite charges

Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm2. a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm

Description : Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm2. a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm

Last Answer : b) 41.2mm

While designing shaft on the basis of torsional rigidity, angle of twist is given by? a) Ml/Gd4 b) 584Ml/Gd4 c) 292 Ml/Gd4 d) None of the mentioned

Description : While designing shaft on the basis of torsional rigidity, angle of twist is given by? a) Ml/Gd4 b) 584Ml/Gd4 c) 292 Ml/Gd4 d) None of the mentioned

Last Answer : b) 584Ml/Gd4

While designing shaft on the basis of torsional rigidity, angle of twist is given by? a) Ml/Gd4 b) 584Ml/Gd4 c) 292 Ml/Gd4 d) None of the mentioned

Description : While designing shaft on the basis of torsional rigidity, angle of twist is given by? a) Ml/Gd4 b) 584Ml/Gd4 c) 292 Ml/Gd4 d) None of the mentioned

Last Answer : b) 584Ml/Gd4

The shafts will have same strength on the basis of torsional rigidity, if (A) Diameter and length of both shafts is same (B) Material of both shafts is same (C) Angle of twist for both shafts is same (D) All of above conditions are satisfied

Description : The shafts will have same strength on the basis of torsional rigidity, if (A) Diameter and length of both shafts is same (B) Material of both shafts is same (C) Angle of twist for both shafts is same (D) All of above conditions are satisfied

Last Answer : (D) All of above conditions are satisfied

Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly proportional to (A) Modulus of rigidity (B) Angle of twist (C) Reciprocal of the length of the shaft (D) Moment of inertia of the shaft section

Description : Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly  proportional to  (A) Modulus of rigidity  (B) Angle of twist  (C) Reciprocal of the length of the shaft  (D) Moment of inertia of the shaft section 

Last Answer : (D) Moment of inertia of the shaft section 

The shafts will have same strength on the basis of torsional rigidity, if (a) diameter and length of both shafts is same (b) material of both shafts is same (c) angle of twist for both shafts is same (d) all of above conditions are satisfied

Description : The shafts will have same strength on the basis of torsional rigidity, if (a) diameter and length of both shafts is same (b) material of both shafts is same (c) angle of twist for both shafts is same (d) all of above conditions are satisfied

Last Answer : (d) all of above conditions are satisfied

Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm². a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm

Description : Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm². a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm

Last Answer : b) 41.2mm

While designing shaft on the basis of torsional rigidity, angle of twist is given by? a) 100Ml/Gd⁴ b) 584Ml/Gd⁴ c) 292 Ml/Gd⁴ d) 300 Ml/Gd⁴

Description : While designing shaft on the basis of torsional rigidity, angle of twist is given by? a) 100Ml/Gd⁴ b) 584Ml/Gd⁴ c) 292 Ml/Gd⁴ d) 300 Ml/Gd⁴

Last Answer : b) 584Ml/Gd⁴

For two shafts joined in parallel, the --------------- in each shaft is same. a. shear stress. b. Angle of twist c. torque d. torsional stress.

Description : For two shafts joined in parallel, the --------------- in each shaft is same. a. shear stress. b. Angle of twist c. torque d. torsional stress.

Last Answer : b. Angle of twist

For two shafts joined in series, the --------------- in each shaft is same. a. shear stress. b. Angle of twist c. torque d. torsional stress.

Description : For two shafts joined in series, the --------------- in each shaft is same. a. shear stress. b. Angle of twist c. torque d. torsional stress.

Last Answer : c. torque

Which bacterial strain developed from natural isolates by genetic manipulations can be used for treating oil spills? (1) Pseudomonas (2) Agrobacterium (3) Clostridium (4) Nitrosomonas

Description : Which bacterial strain developed from natural isolates by genetic manipulations can be used for treating oil spills? (1) Pseudomonas (2) Agrobacterium (3) Clostridium (4) Nitrosomonas

Last Answer : (4) Nitrosomonas Explanation: Nitrosomonas is a genus comprising rod shaped chemoautotrophic bacteria. This rare bacteria oxidizes ammonia into nitrite as a metabolic process. Nitrosomonas are useful in treatment of industrial and sewage waste and in the process of bioremediation.

Which bacterial strain developed from natural isolates by genetic manipulations can be used for treating oil spills ? (1) Pseudomonas (2) Agrobacterium (3) Clostridium (4) Nitrosomonas

Description : Which bacterial strain developed from natural isolates by genetic manipulations can be used for treating oil spills ? (1) Pseudomonas (2) Agrobacterium (3) Clostridium (4) Nitrosomonas

Last Answer : Nitrosomonas

In Rayleigh’s method, the _____________ at the mean position is equal to the maximum potential energy (or strain energy) at the extreme position. (A) minimum kinetic energy (B) minimum potential energy (C) maximum kinetic energy (D) none of the above

Description : In Rayleigh’s method, the _____________ at the mean position is equal to the maximum potential energy (or strain energy) at the extreme position. (A) minimum kinetic energy (B) minimum potential energy (C) maximum kinetic energy (D) none of the above

Last Answer : (C) maximum kinetic energy

Along the neutral axis of a simply supported beam (A) Fibres do not undergo strain (B) Fibres undergo minimum strain (C) Fibres undergo maximum strain (D) None of these

Description : Along the neutral axis of a simply supported beam  (A) Fibres do not undergo strain  (B) Fibres undergo minimum strain  (C) Fibres undergo maximum strain  (D) None of these

Last Answer : (A) Fibres do not undergo strain 

The minimum strain at failure in the tensile reinforcement (Fy = 400 MPa) of RCC beam as per limit state method is (a) 0.0020 (b) 0.0028 (c) 0.0037 (d) 0.0045

Description : The minimum strain at failure in the tensile reinforcement (Fy = 400 MPa) of RCC beam as per limit state method is (a) 0.0020 (b) 0.0028 (c) 0.0037 (d) 0.0045

Last Answer : (c) 0.0037

What is the S.I. unit of torsional rigidity? a. Nm b. N.m2 c. Nm/ radian d. None of the above

Description : What is the S.I. unit of torsional rigidity? a. Nm b. N.m2 c. Nm/ radian d. None of the above

Last Answer : b. N.m2

A glass prism has a refracting angle of `60^@`. The angle of minimum deviation is `40^@`. If velocity of light in vacuum is `3 xx 10^8 m//s`. Calculat

Description : A glass prism has a refracting angle of `60^@`. The angle of minimum deviation is `40^@`. If velocity of light in vacuum is `3 xx 10^8 m//s`. Calculat

Last Answer : A glass prism has a refracting angle of `60^@`. The angle of minimum deviation is `40^@`. If ... of light in glass. What is the angle of incidence ?

How to fill a Butane lighter that has cotton in it?

Description : How to fill a Butane lighter that has cotton in it?

Last Answer : I have a similar lighter, like a Zippo. You do saturate the cotton with lighter fluid, then it should light. However the problem i had was that my Flint was a pretty crappy flint, so i replaced it with a ... info ::edit:: You should be using a lighter fluid' not butane, i.e. this is what i use

What is the chemical signal of butane ?

Description : What is the chemical signal of butane ?

Last Answer : : The chemical signal of butane is C4H10

Butane Signal What ?

Last Answer : Beuten Of Signal Is C4H10

How do you store butane gas?

Description : How do you store butane gas?

Last Answer : butane gas cylinders should be store away from heat, sparks, and other hot surfaces. these butane gas cylinders should also store in a place where people won't use cigarettes or lights. these cylinders ... in a well-ventilated area that will be away from direct sunlight, food, and other drinks.

Why butane gas is cheaper than LPG?

Description : Why butane gas is cheaper than LPG?

Last Answer : butane it's because when you want to travel in any place you can bring the butane that's the one of advantage of butane. in our country there's a lot of mountain and some of the travellers bring ... our country, there are many of small house and they use the butane because it is cheaper than the Lpg

What is the manufacturing process of butane gas?

Description : What is the manufacturing process of butane gas?

Last Answer : Butane comes from natural gas and can also be found in petroleum. The Manufacturing process involves the separation of gas from the oil where it dissolved, often using equipment installed near the source of the gas pocket.

Where can I refill butane gas cylinder in Dubai?

Description : Where can I refill butane gas cylinder in Dubai?

Last Answer : I have never been to Dubai, but local smoke shops would have your desired product. Butane is used in torches, which can be bought at a smoke shop, so they will also provide butane. It should be fairly cheap.

What is the proportion of Propane and Butane gas in LPG Cylinder?

Description : What is the proportion of Propane and Butane gas in LPG Cylinder?

Last Answer : In Australia, England, and the United States, it's 100% propane. In New Zealand and Belgium, it's 60% propane and 40% butane. In India, Spain, and Hungary, it's 35% propane and 65% butane. In ... on climate. Some even change the ration based on the season. But it is never less than 20% propane.

A 3 L gas mixture of propane `(C_(3)H_(8))` and butane `(C_(4)H_(10))` on complete combustion at 25 C produced 10 L `CO_(2.)` Assuming constant P and

Description : A 3 L gas mixture of propane `(C_(3)H_(8))` and butane `(C_(4)H_(10))` on complete combustion at 25 C produced 10 L `CO_(2.)` Assuming constant P and

Last Answer : A 3 L gas mixture of propane `(C_(3)H_(8))` and butane `(C_(4)H_(10))` on complete combustion at 25 C ... .5L` D. `C_(3)H_(8),0LandC_(4)H_(10),3L`

Newman projection of Butane is given, C-2 is rotated by `120^(º)` along `C_(2)-C_(3)` bond in anticloclwise direction, the conformation formed is :

Description : Newman projection of Butane is given, C-2 is rotated by `120^(º)` along `C_(2)-C_(3)` bond in anticloclwise direction, the conformation formed is :

Last Answer : Newman projection of Butane is given, C-2 is rotated by `120^(º)` along `C_(2)-C_(3)` ... A. anti B. fully eclipsed C. gauche D. partially eclipsed

In the following the most stable conformation of n-butane is :

Description : In the following the most stable conformation of n-butane is :

Last Answer : In the following the most stable conformation of n-butane is : A. B. C. D.

Which conformational state of n-butane lies in higher energy state when rotated along `C_(2)-C_(3)` bond?

Description : Which conformational state of n-butane lies in higher energy state when rotated along `C_(2)-C_(3)` bond?

Last Answer : Which conformational state of n-butane lies in higher energy state when rotated along `C_(2)-C_(3)` bond?

What are the Intermolecular forces of 1-(2-propoxy2-methyl)-butane?

Description : What are the Intermolecular forces of 1-(2-propoxy2-methyl)-butane?

Last Answer : The intermolecular forces would be dispersion forces.

What is the mr of butane?

Description : What is the mr of butane?

Last Answer : The molar mass of butane is 58,124; for mr explain this abbreviation.

Main constituents of biogas are (a) Methane and carbon monoxide (b) Butane and carbon monoxide (c) Methane and carbon dioxide (d) Ethylene and carbon dioxide

Description : Main constituents of biogas are (a) Methane and carbon monoxide (b) Butane and carbon monoxide (c) Methane and carbon dioxide (d) Ethylene and carbon dioxide

Last Answer : Ans: (c)

Major constituent of natural gas is a) ethane b) methane c) butane d) propane

Description : Major constituent of natural gas is a) ethane b) methane c) butane d) propane

Last Answer : Answer: b Explanation: Only methane is the major constituent of natural gas.

The main constituents of biogas are (a) methane and hydrogen (b) carbon monoxide and carbon dioxide (c) butane, propane and nitrogen (d) carbon dioxide and methane

Description : The main constituents of biogas are (a) methane and hydrogen (b) carbon monoxide and carbon dioxide (c) butane, propane and nitrogen (d) carbon dioxide and methane

Last Answer : Ans:(d)

LPG is a mixture of (a) carbon monoxide and carbon dioxide (b) butane and propane (c) methane and ethylene (d) carbon dioxide and oxygen

Description : LPG is a mixture of (a) carbon monoxide and carbon dioxide (b) butane and propane (c) methane and ethylene (d) carbon dioxide and oxygen

Last Answer : Ans:(b)

Consider the following statements: 1. Detergents do not produce lather with hard water 2. Water gas is a mixture of carbon monoxide and hydrogen 3. Methane is the chief constituent of CNG 4. LPG contains mainly n-butane 5. The correct statements are: (a) 1, 2 and 4 only (b) 1,3 and 4 only (c) 2, 3 and 4 only (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Detergents do not produce lather with hard water 2. Water gas is a mixture of carbon monoxide and hydrogen 3. Methane is the chief constituent of CNG 4. LPG contains mainly n-butane 5. The correct ... (b) 1,3 and 4 only (c) 2, 3 and 4 only (d) 1, 2 and 3 only

Last Answer : Ans:(c)

Which hydrocarbon is formed by the action of sodium on ethyl iodide? (a) Methane (b) Ethane (c) Ethylene (d) Butane

Description : Which hydrocarbon is formed by the action of sodium on ethyl iodide? (a) Methane (b) Ethane (c) Ethylene (d) Butane

Last Answer : Ans:(d)

Which of the following is the major constituent of LPG? (1) Methane (2) Ethane (3) Propane (4) Butane

Description : Which of the following is the major constituent of LPG? (1) Methane (2) Ethane (3) Propane (4) Butane

Last Answer : (4) Butane Explanation: Butanes are highly flammable, colourless, easily liquefied gases. When blended with propane and other hydrocarbons, it is referred to commercially as LPG, for liquefied petroleum gas.

Which of the following gas is used in cigarette lighters? (1) Butane (2) Propane (3) Methane (4) Ethane

Description : Which of the following gas is used in cigarette lighters? (1) Butane (2) Propane (3) Methane (4) Ethane

Last Answer : (1) Butane Explanation: Butane, a highly flammable, colorless, easily liquefied gas used in gas-type lighters and butane torches. Naphtha, a volatile flammable liquid hydrocarbon mixture used in wick-type lighters and burners.

This substance is commonly known as alcohol and is also used in medicines such as tincture iodine, cough syrups, and many tonics. This is - (1) Propanol (2) Butane (3) Ethanol (4) Methanol

Description : This substance is commonly known as alcohol and is also used in medicines such as tincture iodine, cough syrups, and many tonics. This is - (1) Propanol (2) Butane (3) Ethanol (4) Methanol

Last Answer : (3) Ethanol Explanation: Ethanol is commonly called alcohol and is the active ingredient of all alcoholic drinks. Also, it is a good solvent and is used in medicines such as tincture iodine, cough syrups, and many tonics.

The major component in the LPG is - (1) methane (2) butane (3) ethane (4) propane

Description : The major component in the LPG is - (1) methane (2) butane (3) ethane (4) propane

Last Answer : (2) butane Explanation: Butanes are highly flammable, colourless, easily liquefied gases. When blended with propane and other hydrocarbons, it is referred to commercially as LPG, for liquified petroleum gas. It is used as a petrol component.

L.P.G. is mostly liquefied (1) hydrogen (2) Oxygen (3) butane (4) methane

Description : L.P.G. is mostly liquefied (1) hydrogen (2) Oxygen (3) butane (4) methane

Last Answer : (3) butane Explanation: Liquefied petroleum gas or liquid petroleum gas (LPG) is mostly propane (C3H8), or butane (C4H10). They are most commonly mixtures of these two hydrocarbon gases that ... northern hemisphere winter, the mixes contain more propane, while in summer, they contain more butane.

Which hydrocarbons are the major constituents of 'LPG'? (1) Methane and Ethane (2) Propane and Butane (3) Pentane and Benzene (4) Only Methane

Description : Which hydrocarbons are the major constituents of 'LPG'? (1) Methane and Ethane (2) Propane and Butane (3) Pentane and Benzene (4) Only Methane

Last Answer : (2) Propane and Butane Explanation: Cooking gas, also known as Liquefied Petroleum Gas (LPG) is primarily propane (C3Hg) and butane (C4H10).

Which of the following is the best fuel in terms of energy released per gram of fuel? (1) Hydrogen (2) Methane (3) Ethanol (4) Butane

Description : Which of the following is the best fuel in terms of energy released per gram of fuel? (1) Hydrogen (2) Methane (3) Ethanol (4) Butane

Last Answer : (1) Hydrogen Explanation: The amount of energy released increases with the number of bonds present in the chemical substance or fuel. That is because each bond has a certain amount of energy stored in it therefore the more bonds ... KJ/g; Methane: 55.6 KJ/ g; Ethanol: 29.7 KJ /g; Butane: 49.6KJ/g.

Which of the following gas is used in cigarette lighters? (1) Butane (2) Propane (3) Methane (4) Ethane

Description : Which of the following gas is used in cigarette lighters? (1) Butane (2) Propane (3) Methane (4) Ethane

Last Answer : (1) Butane Explanation: Butane, a highly flammable, colorless, easily liquefied gas used in gas-type lighters and butane torches. Naphtha, a volatile flammable liquid hydrocarbon mixture used in wick-type lighters and burners.

Domestic cooking gas consists mostly of (1) methane and ethane (2) liquefied butane and isobutene (3) hydrogen and acetylene (4) ethylene and carbon monoxide

Description : Domestic cooking gas consists mostly of (1) methane and ethane (2) liquefied butane and isobutene (3) hydrogen and acetylene (4) ethylene and carbon monoxide

Last Answer : (2) liquefied butane and isobutene Explanation: Domestic gas is another name for Liquefied Petroleum Gas (LPG). Varieties of LPG bought and sold include mixes that are primarily propane (C3H8), primarily ... propane and butane, depending on the season - in winter more propane, in summer more butane.

The main Constituent of natural gas is (1) Methane (2) Ethane (3) Butane (4) Propane

Description : The main Constituent of natural gas is (1) Methane (2) Ethane (3) Butane (4) Propane

Last Answer : (1) Methane Explanation: Natural has is a naturally occurring hydrocarbon gas mixture consisting primarily of methane, with other hydrocarbons, carbon dioxide, nitrogen and hydrogen sulfide. It is ... methane clathrates. Petroleum is also another resource found in proximity to and with natural gas.

Indane gas is a mixture of which gases? (1) butane and hydrogen (2) butane and propane (3) butane and oxygen (4) methane and oxygen

Description : Indane gas is a mixture of which gases? (1) butane and hydrogen (2) butane and propane (3) butane and oxygen (4) methane and oxygen

Last Answer : (2) butane and propane

The major constituent of gobar gas is – (1) Carbon dioxide (2) Methane (3) Butane (4) Isobutane

Description : The major constituent of gobar gas is – (1) Carbon dioxide (2) Methane (3) Butane (4) Isobutane

Last Answer : (2) Methane Explanation: lobar Gas (Methane) is generated by the decomposition of organic cow dung. It consists of 55-65% methane, 30-35% carbon dioxide, with some hydrogen, nitrogen ... upon the origin of the anaerobic digestion process. Landfill gas typically has methane concentrations around 50%.