1 Answer

Answer :

The bar magnet has the dipole moment.

Related questions

Last Answer : Magnetism of a magnet can be destroyed by heating, hammering, by inductive action of another magnet.

Description : A rectangular magnet of magnetic moment M is cut into two piece of same length, the magnetic moment of each piece will be

Last Answer : A rectangular magnet of magnetic moment M is cut into two piece of same length, the magnetic moment of each piece will be M/2.

Last Answer : A permanent magnet attracts some substances and repels others.

Last Answer : The most effective and quickest may of making a magnet from soft iron is by placing it inside a coil carrying current.

Last Answer : When a magnet is in motion relative to a coil the induced e.m.f. does not depend upon resistance of the coil.

Description : The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields

Last Answer : The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields a soft iron shielding is used.

Description : 8. How does a solenoid behave like a magnet? Can you determine the north and south poles of a current–carrying solenoid with the help of a bar magnet? Explain. -Physics-10

Last Answer : A solenoid is a long coil of circular loops of insulated copper wire. The magnetic field produced around the solenoid when the current is passed through it is similar to the magnetic field ... shows the arrangement of magnetic fields produced around the solenoid when current is passed through it.

Description : 1. Draw magnetic field lines around a bar magnet. -Physics-10

Last Answer : Magnetic field lines of a bar magnet emerge from the North Pole and terminate at the South Pole as shown in the figure below.

Description : 1. Why does a compass needle get deflected when brought near a bar magnet? -Physics-10

Last Answer : The compass needle is a small magnet. When the compass needle is brought close to a bar magnet, the magnetic field lines of the compass needle interact with the magnetic field lines of bar magnet, which causes the compass needle to deflect.

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : The answer is '6'

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : answer:

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : answer:

Description : Are the magnetic lines force of a bar magnets strongest at the end of the magnet or in the middle?

Last Answer : Feel Free to Answer

Description : How will we find out the north pole and south pole of a bar magnet with no markings to indicate poles?

Last Answer : If you roughly know where North is, tie the bar magnet to a piece of thin string so it balances horizontally and let it dangle. Once it stops spinning and waving about, one end should point North. Mark this end as with an N for north.

Description : How can iron fillings be used to map the magnetic field of a bar magnet?

Last Answer : What is the answer ?

Description : How will we find out the north pole and south pole of a bar magnet with no markings to indicate poles?

Last Answer : If you roughly know where North is, tie the bar magnet to a piece of thin string so it balances horizontally and let it dangle. Once it stops spinning and waving about, one end should point North. Mark this end as with an N for north.

Description : Magnetism at the centre of a bar magnet is

Last Answer : around- zero

Description : If a bar magnet, tied in the middle with a thread, were suspended at the north pole of the earth, it would take (a) a horizontal position (b) a nearly vertical position with its north pole pointing downward (c) a vertical position with its south pole pointing downward (d) a slanting position

Last Answer : Ans:(b)

Description : Magnetism at the centre of a bar magnet is - (1) minimum (2) maximum (3) zero (4) minimum or maximum

Last Answer : (3) zero Explanation: The field at the center is not zero, but weak. At the exact center of a magnet the field lines are parallel (straight lines if we draw it). Anywhere else they are slightly divergent.

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : (4) remains the same Explanation: The poles remains same whether the magnet is cut into two equal half or more and also pole strength remains same but magnetic moment reduces due to decrease in the length of ... is called north pole (N-poled of the magnet and the other end the south pole (S-pole).

Description : In an AC generator, direct current from a separate source is passed through the windings of the rotor _____________. A. by means of slip rings and brushes B. by means of a commutator C. by means of rotating bar magnet D. to minimize the danger of arc over

Last Answer : Answer: A

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be?

Last Answer : 6

Description : Magnetic flux linked with a coil can be changed by using an: a. Permanent magnet b.Bar magnet c. Electromagnet d. Horseshoe magnet

Last Answer : b.Bar magne

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece – (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : remains the same

Description : Define magnetic lines of force. Also draw and show magnetic lines of force of a bar type magnet.

Last Answer : Magnetic Lines of force- These are the imaginary lines (having no physical existence) introduced by Faraday for the pictorial representation of the distribution of a magnetic field.  OR  A line of ... that the tangent at any point gives direction of the resultant force at that point. 

Description : Define magnetic lines of force. Show the magnetic lines of force for bar type magnet.

Last Answer : Magnetic linens of force is the imaginary lines for magnetic field of magnet around it. These magnetic lines of forces are introduced by Michael Faraday. The direction of lines of force is from N-pole to S-pole. The figure shows lines of force for bar type magnet.

Description : A bar magnet when suspended freely always points in the? (A) East west direction (B) North south direction (C) vertically upwards (D) vertically downwards

Last Answer : A bar magnet when suspended freely always points in the North south direction

Description : Ferromagnets

Last Answer : Ferromagnets Only certain materials, such as iron, cobalt, nickel, and gadolinium, exhibit strong magnetic effects. Such materials are called ferromagnetic, after the Latin word for iron, ... licensed under a Creative Commons Attribution 4.0 International License, except where otherwise noted.

Last Answer : Atrraction  capacity  will  increase  if  supply  current  is  increased.

Last Answer : Temporary magnets are used in loud-speakers,generators, motors.

Last Answer : Main causes of noisy solenoid are strong tendency of fan out of laminations at the end caused by repulsion among magnetic lines of force, uneven bearing surface, caused by dirt or uneven wear between moving and stationary parts.

Last Answer : Core of an electromagnet should have low coercivity, high susceptibility.

Last Answer : The magnetic materials exhibit the property of magnetisation because of spin of nucleus.

Last Answer : The stray line of magnetic flux is defined as a line of magnetic flux which does not follow the designed path.

Last Answer : It assures a position which follows a line of magnetic flux

Last Answer : The initial permeability of an iron rod is the permeability almost in non-magnetised state.

Last Answer : The magnetic reluctance of a material decreases with increasing cross-sectional area of the material.

Last Answer : The magneto-motive force is the sum of all currents embraced by one line of magnetic field.

Last Answer : The uniform magnetic field is the field in which all lines of magnetic flux are parallel and equidistant.

Last Answer : Magnetic moment is a vector quantity.

Last Answer : A keeper is used to provide a closed path for flux.

Last Answer : The retentivity (a property) of material is useful for the construction of permanent magnets.

Description : If a copper disc is rotated rapidly below a freely suspended magnetic needle, the magnetic needle shall start rotating with a velocity

Last Answer : If a copper disc is rotated rapidly below a freely suspended magnetic needle, the magnetic needle shall start rotating with a velocity less than that of disc and in the same direction.

Last Answer : The commonly used material for shielding or screening magnetism is soft iron.

Last Answer : The Biot-savart’s law is a general modification of Ampere’s law.

Last Answer : Unit for quantity of electricity is coulomb.

Description : The unit of flux is the same as that of

Last Answer : The unit of flux is the same as that of pole strength.

Description : A 300 mm long conductor is carrying a current of 10 A and is situated at right angles to a magnetic field having a flux density of 0.8 T ; the force on the conductor will be

Last Answer : A 300 mm long conductor is carrying a current of 10 A and is situated at right angles to a magnetic field having a flux density of 0.8 T ; the force on the conductor will be 2.4 N.

Description : Two long parallel conductors carry 100 A. If the conductors are separated by 20 mm, the force per meter of length of each conductor will be

Last Answer : Two long parallel conductors carry 100 A. If the conductors are separated by 20 mm, the force per meter of length of each conductor will be 0.1 N.