The commonly used material for shielding or screening magnetism is

by

1 Answer

Answer :

The commonly used material for shielding or screening magnetism is soft iron.
by
edited

Related questions

Magnetism of a magnet can be destroyed by

Last Answer : Magnetism of a magnet can be destroyed by heating, hammering, by inductive action of another magnet.

The magnetism left in the iron after exciting field has been removed is known as

Last Answer : The magnetism left in the iron after exciting field has been removed is known as residual magnetism.

Materials subjected to rapid reversal of magnetism should have

Last Answer : Materials subjected to rapid reversal of magnetism should have high permeability and low hysteresis loss.

The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields (a) meter is surrounded by strong magnetic fields (b) a soft iron shielding is used (c) a plastic shielding is provided (d) a shielding of anon-magnetic material is used

Description : The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields (a) meter is surrounded by strong magnetic fields (b) a soft ... is used (c) a plastic shielding is provided (d) a shielding of anon-magnetic material is used

Last Answer : (b) a soft iron shielding is used

State the function of biological shielding in case of Nuclear Reactor and give material used for it.

Description : State the function of biological shielding in case of Nuclear Reactor and give material used for it.

Last Answer : Function of biological shielding in Nuclear Reactor:  Shielding is provided to absorb alpha, beta particles and gama rays which are produced during nuclear chain reaction (fission process) The ... of Water or concrete wall are provided all around the reactor vessel for stopping neutrons. 

______ is most commonly used for making magnetic recording tape.

Description : ______ is most commonly used for making magnetic recording tape.

Last Answer : Ferric oxide is most commonly used for making magnetic recording tape.

Indicate which of the following material does not retain magnetism permanently. (a) Soft iron (b) Stainless steel (e) Hardened steel (d) None of the above

Description : Indicate which of the following material does not retain magnetism permanently. (a) Soft iron (b) Stainless steel (e) Hardened steel (d) None of the above

Last Answer : (a) Soft iron

Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Description : Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Last Answer : South pole at the right, north pole at the left.

A detailed stated version of shortlisted new ideas in meaningful consumer terms is best classified as *  concept  phase  screening  raw-material screening

Description : A detailed stated version of shortlisted new ideas in meaningful consumer terms is best classified as *  concept  phase  screening  raw-material screening

Last Answer :  concept

The detailed stated version of shortlisted new ideas in meaningful consumer terms is best classified as A. product concept B. production phase C. production screening D. raw-material screening

Description : The detailed stated version of shortlisted new ideas in meaningful consumer terms is best classified as A. product concept B. production phase C. production screening D. raw-material screening

Last Answer : A. product concept

A detailed stated version of shortlisted new ideas in meaningful consumer terms is best classified as A.concept B.phase C.screening D.raw-material screening Answer: A

Description : A detailed stated version of shortlisted new ideas in meaningful consumer terms is best classified as A.concept B.phase C.screening D.raw-material screening Answer: A

Last Answer : A.concept

What is electrons shielding?

Description : What is electrons shielding?

Last Answer : The shielding effect describes the decrease in attractionbetween an electron and the nucleus in any atom with more than oneelectron shell. It is also referred to as the screening effect or ... attraction exerted by the positive charge in thenucleus.Also, it has trends in the Periodic Table

What is the proper procedure for suppressing electrical noise in a mobile station? A. Apply shielding and filtering where necessary B. Insulate a all plain sheet metal surfaces from each other C. Apply anti-static spray liberally to all nonmetallic D. Install filter capacitors in series with all dc wiring

Description : What is the proper procedure for suppressing electrical noise in a mobile station? A. Apply shielding and filtering where necessary B. Insulate a all plain sheet metal surfaces from each other C. ... -static spray liberally to all nonmetallic D. Install filter capacitors in series with all dc wiring

Last Answer : A. Apply shielding and filtering where necessary

What is the function of shielding?

Description : What is the function of shielding?

Last Answer : Shielding prevents radiations to reach outside the reactor. Lead blocks and concrete enclosure that is strong enough of several meters thickness are used for shielding.

What is the meaning of the term “velocity factor” of a transmission line? A. The ratio of the characteristic impedance of the line to the terminating impedance B. The index of shielding for coaxial cable. C. The velocity of the wave on the transmission line multiplied by the velocity of light in a vacuum. D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum.

Description : What is the meaning of the term velocity factor of a transmission line? A. The ratio of the characteristic impedance of the line to the terminating impedance B. The index of shielding for coaxial ... The velocity of the wave on the transmission line divided by the velocity of light in a vacuum.

Last Answer : D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum.

One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. Heating of capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Description : One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. ... capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Last Answer : B. Heating of capacitor in the oscillator

How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Description : How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Last Answer : C. Use of regulated power supply

What is the meaning of the term velocity factor of a transmission line? A. The index of shielding for coaxial cable B. The velocity of the wave on the transmission line multiplied by the velocity of light in vacuum C. The ratio of the characteristic impedance of the line to the terminating impedance D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum

Description : What is the meaning of the term velocity factor of a transmission line? A. The index of shielding for coaxial cable B. The velocity of the wave on the transmission line multiplied by the velocity of ... The velocity of the wave on the transmission line divided by the velocity of light in a vacuum

Last Answer : D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum

An advantage of optic fiber rejecting an induced noise signals from magnetic field or solar storms flux. A. Electric hazard B. Cross talk C. Immunity to noise D. Shielding

Description : An advantage of optic fiber rejecting an induced noise signals from magnetic field or solar storms flux. A. Electric hazard B. Cross talk C. Immunity to noise D. Shielding

Last Answer : C. Immunity to noise

How can receiver desensitizing be reduced? A. Increase the receiver bandwidth B. Ensure good RF shielding between the transmitter and receiver C. Increase the transmitter audio gain D. Decrease the receiver squelch, gain.

Description : How can receiver desensitizing be reduced? A. Increase the receiver bandwidth B. Ensure good RF shielding between the transmitter and receiver C. Increase the transmitter audio gain D. Decrease the receiver squelch, gain.

Last Answer : D. Decrease the receiver squelch, gain.

Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Description : Which one is not the basic electrical protection measures in the Philippine Electronics Code? A. Voltage/ current limiting and interrupting B. Undergrounding C. Grounding and bonding D. Shielding

Last Answer : B. Undergrounding

The thickness of metallic shielding on cables is usually (a) 0.04 mm (b) 0.2 to 0.4 mm (e) 3 to 5 mm (d) 40 to 60 mm

Description : The thickness of metallic shielding on cables is usually (a) 0.04 mm (b) 0.2 to 0.4 mm (e) 3 to 5 mm (d) 40 to 60 mm

Last Answer : (a) 0.04 mm

What effect does the shielding of the screen grid by the control grid have on plate current in beam-forming tetrodes?

Description : What effect does the shielding of the screen grid by the control grid have on plate current in beam-forming tetrodes?

Last Answer : By increasing the number of electrons that reach the plate, plate current is increased.

What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant information c) None if the tensile strength of the consumables is the same as the approved one d) Change the electrode for the correct type and continue welding

Description : What course of action should be taken upon finding a welder using incorrect shielding gas? a) Allow welding to proceed if the workmanship is good b) Report the incident and record all relevant ... the same as the approved one d) Change the electrode for the correct type and continue welding

Last Answer : b) Report the incident and record all relevant information

What is shielding in NMR? A. Using a curved piece of metal to block an opponent’s attack B. Putting metal around an Rf source C. When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei D. Blocking parts of a molecule from Rf radiation

Description : What is shielding in NMR? A. Using a curved piece of metal to block an opponent’s attack B. Putting metal around an Rf source C. When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei D. Blocking parts of a molecule from Rf radiation

Last Answer : When the magnetic moment of an atom blocks the full induced magnetic field from surrounding nuclei

Signal splitting in NMR arises from? A. Shielding effect B. Spin-spin decoupling C. Spin-spin coupling D. Deshielding effecr

Description : Signal splitting in NMR arises from? A. Shielding effect B. Spin-spin decoupling C. Spin-spin coupling D. Deshielding effecr

Last Answer : Spin-spin coupling

Superconducting materials are being used in the Superconducting Super Collider to: w) cool the particles. x) minimize electrical power consumption. y) maximize the acceleration potentials. z) provide radiation shielding.

Description : Superconducting materials are being used in the Superconducting Super Collider to: w) cool the particles. x) minimize electrical power consumption. y) maximize the acceleration potentials. z) provide radiation shielding.

Last Answer : ANSWER: X -- MINIMIZE ELECTRICAL POWER CONSUMPTION.

Describe the term 'Nuclear shielding' in Nuclear Power Plant.

Last Answer : Explanation of 'Nuclear shielding' in Nuclear Power Plant:  Shielding is provided to absorb alpha, beta particles and gama rays which are produced during nuclear chain reaction (fission process) The ... of Water or concerate wall are provided all around the reactor vessel for stopping neutrons.  

State the function of following components of a nuclear power station: i) Moderator ii) Shielding iii) Control rod iv) Coolant

Description : State the function of following components of a nuclear power station: i) Moderator ii) Shielding iii) Control rod iv) Coolant 

Last Answer : i) Function of Moderator :- Moderator is to moderate or reduce the speed of fast neutron to help the fission process.  ii) Function of sheilding : Shielding is to protect environment, ... from reactor core and transfer it in heat exchanger for producing steam at high pressure and temperature. 

Explain the purpose of shielding and reflector in a nuclear reactor.

Description : Explain the purpose of shielding and reflector in a nuclear reactor.

Last Answer : 1. Shielding:-  The function of sheilding is to protect environment, humens and animals from the harmful radioactive radiation (pollution).before they are emitted to atmosphere. Shilding is provided to ... :- The function of reflector is to reflect back the neutrons which are leaving from core.

The degree of protection by ground wire depends upon the a. Arcing angle b. Shielding angle c. Power factor d. All of above

Description : The degree of protection by ground wire depends upon the a. Arcing angle b. Shielding angle c. Power factor d. All of above

Last Answer : The degree of protection by ground wire depends upon the a. Arcing angle b. Shielding angle c. Power factor d. All of above

The magnetic reluctance of a material

Last Answer : The magnetic reluctance of a material decreases with increasing cross-sectional area of the material.

The retentivity (a property) of material is useful for the construction of

Last Answer : The retentivity (a property) of material is useful for the construction of permanent magnets.

A material which is slightly repelled by a magnetic field is known as

Last Answer : A material which is slightly repelled by a magnetic field is known as diamagnetic material.

For a particular material the Hall coefficient was found to be zero. The material is

Last Answer : For a particular material, the Hall coefficient was found to be zero. The material is metal.

Surface resistance of an insulating material is reduced due to the

Last Answer : Surface resistance of an insulating material is reduced due to the smoky and dirty atmosphere, humidity in the atmosphere.

______ is an example of piezoelectric material.

Last Answer :  Quartz is an example of piezoelectric material.

Mercury as an electric contact material is?

Description : Mercury as an electric contact material is?

Last Answer : Mercury as an electric contact material is a metal liquid.

A highly conductive material must have?

Description : A highly conductive material must have?

Last Answer : A highly conductive material must have highest conductivity, lowest temperature co-efficient, good mechanical strength, good corrosion resistance, easy solderable and drawable quality.

Why don't magnets lose their magnetism?

Description : Why don't magnets lose their magnetism?

Last Answer : They can if you strike them. Unless it is a permanent magnet.

I just held a lighter to a magnet and it lost its magnetism. Why?

Description : I just held a lighter to a magnet and it lost its magnetism. Why?

Last Answer : This is too science-y for me but there’s a well-documented experiment here concluding the fact that heat reduces magnetic fields (or force, or whatever).

Where was the first magnetism discovered ?

Description : Where was the first magnetism discovered ?

Last Answer : Magnetism was first discovered in China.

When a piece of iron is rubbed with a magnet it acquires magnetism ' What kind of change is this and why ?

Description : When a piece of iron is rubbed with a magnet it acquires magnetism ' What kind of change is this and why ?

Last Answer : When a piece of iron is rubbed by a magnet, it acquires magnetism ' is a physical or positional change. This is because when rubbed by a magnet, no other substance is formed from iron. Again , when a piece of magnetized iron is heated, it loses its magnetism and is converted into ordinary iron.

What is magnetism ?

Description : What is magnetism ?

Last Answer : The attractive and directional religion of a magnet is called its magnetism. In other words, the force of a magnet is called magnetism. Without magnetism, matter cannot be considered as magnet.

What is magnetism ?

Description : What is magnetism ?

Last Answer : : In physics, magnetism refers to the phenomenon of attraction or repulsion of one substance by another. In general, the religion of magnetism is called magnetism. Note that magnetism is the physical property of a magnet , not a chemical property.

What are the main religions of magnetism ?

Description : What are the main religions of magnetism ?

Last Answer : There are four main religions of magnetism.

What is the magnetism of a magnet ?

Last Answer : Magnetism of a magnet A: Physical properties.

How much magnetism does a salt have?

Description : How much magnetism does a salt have?

Last Answer : Need answer

What is a magnet that does not keep its magnetism very long?

Description : What is a magnet that does not keep its magnetism very long?

Last Answer : This would be a temporary magnet.

What has a form of energy that can produce heat light magnetism and electrical charges?

Description : What has a form of energy that can produce heat light magnetism and electrical charges?

Last Answer : if you mean to have commas between heat, light, magnetism, andelectrical charges then there is none. if heat light magnetism isall one thing then you're on your own.