What is the type of bonding in silicon? (A) Ionic. (B) Covalent. (C) Metallic. (D) Ionic + Metallic

What is the type of bonding in silicon?
(A) Ionic. (B) Covalent.
(C) Metallic. (D) Ionic + Metallic
by

1 Answer

Answer :

(B) Covalent.
by

Related questions

The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Description : The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Last Answer : D) Covalent

Semiconductors possess which type of bonding? a) Metallic b) Covalent c) Ionic d) Magnetic

Description : Semiconductors possess which type of bonding? a) Metallic b) Covalent c) Ionic d) Magnetic

Last Answer : b) Covalent

Sodium chloride, potassium chloride, magnesium oxide are examples of molecules with (a) Covalent bonding (b) Ionic bonding (c) Metallic bonding (d) Hydrogen bonding

Description : Sodium chloride, potassium chloride, magnesium oxide are examples of molecules with (a) Covalent bonding (b) Ionic bonding (c) Metallic bonding (d) Hydrogen bonding

Last Answer : Ans:(b)

For silicon the forbidden gap is (A) 1.1ev. (B) 0.25ev. (C) 0.5ev. (D) 0.7ev.

Description : For silicon the forbidden gap is (A) 1.1ev. (B) 0.25ev. (C) 0.5ev. (D) 0.7ev.

Last Answer : (A) 1.1ev.

Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Description : Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Last Answer : (B) Silicon sheet steel.

What type of bonding is most important in CH3CH2CH2CH2CH2CH3? (a) ionic (b) hydrogen (c) covalent (d) polar

Description : What type of bonding is most important in CH3CH2CH2CH2CH2CH3? (a) ionic (b) hydrogen (c) covalent (d) polar

Last Answer : covalent

Is hydrofluoric acid ionic or covalent bonding?

Description : Is hydrofluoric acid ionic or covalent bonding?

Last Answer : What is the answer ?

For _______ bonding, one or more electrons are transferred between atoms. a. hydrogen b. ionic c. peptide d. covalent

Description : For _______ bonding, one or more electrons are transferred between atoms. a. hydrogen b. ionic c. peptide d. covalent

Last Answer : b. ionic

The type of crystal lattice exemplified in a diamo is: w) ionic crystal x) covalent network crystal y) metallic crystal z) covalent molecular crystal

Description : The type of crystal lattice exemplified in a diamo is: w) ionic crystal x) covalent network crystal y) metallic crystal z) covalent molecular crystal

Last Answer : ANSWER: X -- COVALENT NETWORK CRYSTAL

Is Co(s) ionic or covalent or metallic?

Description : Is Co(s) ionic or covalent or metallic?

Last Answer : Need answer

What are ionic, covalent and metallic bonds?

Description : What are ionic, covalent and metallic bonds?

Last Answer : all of una deh kraz o! u mean say una no sabi dis kyn simple question.

What are ionic, covalent and metallic bonds?

Description : What are ionic, covalent and metallic bonds?

Last Answer : all of una deh kraz o! u mean say una no sabi dis kyn simple question.

NaCI has _______. (1) Non-polar bonds (2) Polar covalent bonds (3) Metallic bonds (4) Ionic bonds

Description : NaCI has _______. (1) Non-polar bonds (2) Polar covalent bonds (3) Metallic bonds (4) Ionic bonds

Last Answer : (4) Ionic bonds Explanation: Sodium Chloride, NaCl. The classic case of ionic bonding, the sodium chloride molecule forms by the ionization of sodium and chlorine atoms and the attraction of the resulting ions.

Some substances are good conductor of electricity in both the solid and liquid states. These substances are generally-------? A. ionic substances B. metallic substances (Answer) C. molecular solids D. covalent network solids

Description : Some substances are good conductor of electricity in both the solid and liquid states. These substances are generally-------? A. ionic substances B. metallic substances (Answer) C. molecular solids D. covalent network solids

Last Answer : B. metallic substances (Answer)

Which class of solids could have London Forces the attractive forces between particles in crystal lattice positions? w) ionic x) covalent y) metallic z) molecular

Description : Which class of solids could have London Forces the attractive forces between particles in crystal lattice positions? w) ionic x) covalent y) metallic z) molecular

Last Answer : ANSWER: Z -- MOLECULAR

When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.

Description : When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.

Last Answer : (A) acquire negative charge.

In order to obtain p-type germanium it should be doped with a (A) Trivalent impurity. (B) Tetravalent impurity. (C) Pentavalent impurity. (D) Any of the above will do.

Description : In order to obtain p-type germanium it should be doped with a (A) Trivalent impurity. (B) Tetravalent impurity. (C) Pentavalent impurity. (D) Any of the above will do.

Last Answer : (A) Trivalent impurity.

In p-type semiconductor the majority carriers are (A) holes. (B) electrons. (C) positive ions. (D) negative ions.

Description : In p-type semiconductor the majority carriers are (A) holes. (B) electrons. (C) positive ions. (D) negative ions.

Last Answer : (A) holes.

Hall effect may be used for which of the following? (A) determining whether the semiconductor is p or n type. (B) determining the carrier concentration. (C) calculating the mobility. (D) All the above.

Description : Hall effect may be used for which of the following? (A) determining whether the semiconductor is p or n type. (B) determining the carrier concentration. (C) calculating the mobility. (D) All the above.

Last Answer : (D) All the above. Ans: D Determining whether the semiconductor is p or n type, determining the carrier concentration, calculating the mobility

Holes are majority carriers in (A) P-type semiconductors. (B) N-type semiconductors. (C) Insulators. (D) Superconductors.

Description : Holes are majority carriers in (A) P-type semiconductors. (B) N-type semiconductors. (C) Insulators. (D) Superconductors.

Last Answer : (A) P-type semiconductors.

n-type semiconductor is an example of (A) extrinsic semiconductor. (B) intrinsic semiconductor. (C) super conductor. (D) insulators..

Description : n-type semiconductor is an example of (A) extrinsic semiconductor. (B) intrinsic semiconductor. (C) super conductor. (D) insulators..

Last Answer : (A) extrinsic semiconductor.

In n type semi conductor added impurity is (A) pentavalent. (B) divalent. (C) tetravalent. (D) trivalent.

Description : In n type semi conductor added impurity is (A) pentavalent. (B) divalent. (C) tetravalent. (D) trivalent.

Last Answer : (A) pentavalent.

What is a modular system? List the important properties of a modular system.

Description : What is a modular system? List the important properties of a modular system.

Last Answer : Ans: A modular system consists of well defined manageable units to well defined interfaces among them. Desirable properties are Each module is a well defined subsystem useful to others Each module ... modules Modules should be easier to use than build Modules should have a simple interface

State the functions of a fuse. Mention the desirable properties of fuse materials.

Description : State the functions of a fuse. Mention the desirable properties of fuse materials.

Last Answer : Ans: Fuse is a protective device, which consists of a thin wire or strip. This wire or strip is placed with the circuit it has to protect, so that the circuit-current flows through it. When ... silver and silver alloys are used of lower ratings. Copper alloys are used in fuses of higher ratings.

Give four examples of natural insulating materials.

Description : Give four examples of natural insulating materials.

Last Answer : Ans: Examples of the natural insulating materials are cotton, rubber, wood, mica.

Classify plastic materials into two categories, describe their important properties and give two examples of each.

Description : Classify plastic materials into two categories, describe their important properties and give two examples of each.

Last Answer : Ans: Plastic materials can be classified into thermoplastic and thermosetting plastics. Thermoplastic materials:- The properties of these plastic materials do not change considerably if they are melted ... forming elastic threads and films. Examples are Phenol formaldehyde (Bakelite), Epoxy resins.

Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Description : Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Last Answer : (D) All the above.

Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Description : Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Last Answer : (B) Resistivity

Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Description : Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Last Answer : (D) Brass.

Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Description : Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Last Answer : (A) Negative

Atoms with four valence electrons are good conductors. (A) True (B) False

Description : Atoms with four valence electrons are good conductors. (A) True (B) False

Last Answer : (B) False

Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Description : Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Last Answer : (D) Grain orientation of material.

Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Description : Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Last Answer : (C) A large energy gap.

Paper is hygroscopic and absorbent. (A) True (B) False

Description : Paper is hygroscopic and absorbent. (A) True (B) False

Last Answer : (A) True

In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Description : In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Description : Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Last Answer : (A) provide path to magnetic flux.

Addition of trivalent impurity to a semiconductor creates many (A) holes. (B) free electrons. (C) valance electrons. (D) bound electrons.

Description : Addition of trivalent impurity to a semiconductor creates many (A) holes. (B) free electrons. (C) valance electrons. (D) bound electrons.

Last Answer : (B) free electrons.

Hall effect is associated with (A) Conductors. (B) Semiconductors. (C) Thermistors. (D) Solders.

Description : Hall effect is associated with (A) Conductors. (B) Semiconductors. (C) Thermistors. (D) Solders.

Last Answer : (B) Semiconductors.

Hard magnetic materials are used for making (A) Permanent magnets. (B) Temporary magnets. (C) Conductors. (D) Insulator.

Description : Hard magnetic materials are used for making (A) Permanent magnets. (B) Temporary magnets. (C) Conductors. (D) Insulator.

Last Answer : (A) Permanent magnets.

Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Description : Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Last Answer : (A) Nichrome

A transistor has (A) One p-n junction. (B) Two p-n junction. (C) Four p-n junction. (D) Five p-n junction.

Description : A transistor has (A) One p-n junction. (B) Two p-n junction. (C) Four p-n junction. (D) Five p-n junction.

Last Answer : (B) Two p-n junction.

Bronze is an alloy of (A) Copper and Tin. (B) Copper and Steel. (C) Copper and Mercury. (D) Copper and Aluminium.

Description : Bronze is an alloy of (A) Copper and Tin. (B) Copper and Steel. (C) Copper and Mercury. (D) Copper and Aluminium.

Last Answer : (A) Copper and Tin.

Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Description : Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Last Answer : (C) Tungsten.

Number of Terminals in a MOSFET are (A) Two (B) Three (C) Four (D) Five

Description : Number of Terminals in a MOSFET are (A) Two (B) Three (C) Four (D) Five

Last Answer : (B) Three

The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Description : The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Last Answer : (B) increases with temperature.

P-N junction is (A) a rectifier. (B) an amplifier. (C) an Oscillator. (D) a Coupler.

Description : P-N junction is (A) a rectifier. (B) an amplifier. (C) an Oscillator. (D) a Coupler.

Last Answer : (A) a rectifier.

Micanite is a form of (A) Built up mica. (B) Hydrated potassium aluminium silicate. (C) Magnesium mica. (D) Calcium mica.

Description : Micanite is a form of (A) Built up mica. (B) Hydrated potassium aluminium silicate. (C) Magnesium mica. (D) Calcium mica.

Last Answer : (A) Built up mica.

The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Description : The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Last Answer : (A) SiO2

Hard ferrites are used for making (A) Transformer cores. (B) Electrical machinery. (C) High frequency equipment. (D) Light weight permanent magnets.

Description : Hard ferrites are used for making (A) Transformer cores. (B) Electrical machinery. (C) High frequency equipment. (D) Light weight permanent magnets.

Last Answer : (D) Light weight permanent magnets.