In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

In a ferromagnetic material the state of flux density is as follows when external magnetic
field is applied to it.
(A) Increased (B) Decreased
(C) Remains unchanged (D) Becomes zero
by

1 Answer

Answer :

(C) Remains unchanged
by

Related questions

For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Description : For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (B) Is decreased

For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Description : For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

The critical temperature above which the ferromagnetic materials loose their magnetic property is known as (A) hysterisis. (B) Curie point. (C) transition temperature. (D) standard temperature.

Description : The critical temperature above which the ferromagnetic materials loose their magnetic property is known as (A) hysterisis. (B) Curie point. (C) transition temperature. (D) standard temperature.

Last Answer : (B) Curie point

Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Description : Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Last Answer : (A) ferromagnetic material.

Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Description : Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Last Answer : (A) provide path to magnetic flux.

Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Description : Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Last Answer : (C) magnetic materials.

Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Description : Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Last Answer : (D) Grain orientation of material.

Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Description : Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Last Answer : (D) Both insulating and dielectric material.

A pure semiconductor under ordinary conditions behaves like (A) a conductor. (B) an insulator. (C) a magnetic material. (D) a ferro-electric material.

Description : A pure semiconductor under ordinary conditions behaves like (A) a conductor. (B) an insulator. (C) a magnetic material. (D) a ferro-electric material.

Last Answer : (B) an insulator.

The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Description : The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Last Answer : (B) increases with temperature.

If the tendon is placed at an eccentricity e below the centroidal axis of the longitudinal axis of a rectangular beam (sectional modulus Z and stressed load P in tendon) the stress at the extreme top edge (A) Is increased by PZ/e (B) Is increased by Pe/Z (C) Is decreased by Pe/Z (D) Remains unchanged

Description : If the tendon is placed at an eccentricity e below the centroidal axis of the longitudinal axis of a rectangular beam (sectional modulus Z and stressed load P in tendon) the stress at the extreme top edge (A) Is ... by PZ/e (B) Is increased by Pe/Z (C) Is decreased by Pe/Z (D) Remains unchanged

Last Answer : Answer: Option C

Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Description : Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Last Answer : (D) All the above.

If the cross-sectional area of a magnetic field increases, but the flux remains the same, the flux density:

Description : If the cross-sectional area of a magnetic field increases, but the flux remains the same, the flux density: A. increases B. decreases C. remains the same D. doubles

Last Answer : If the cross-sectional area of a magnetic field increases, but the flux remains the same, the flux density: decreases

A magnetic material becomes __________ above the Curie temperature. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Description : A magnetic material becomes __________ above the Curie temperature. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Last Answer : (C) Paramagnetic

Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft magnetic materials (C) Soft magnetic materials (e.g., pure iron) have higher permeability and low hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Description : Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft ... hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Last Answer : Option D

Hard magnetic materials are used for making (A) Permanent magnets. (B) Temporary magnets. (C) Conductors. (D) Insulator.

Description : Hard magnetic materials are used for making (A) Permanent magnets. (B) Temporary magnets. (C) Conductors. (D) Insulator.

Last Answer : (A) Permanent magnets.

Permanent magnets are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) semi conductors. (D) super conductors.

Description : Permanent magnets are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) semi conductors. (D) super conductors.

Last Answer : (B) hard magnetic materials.

Dielectric materials are (A) Insulating materials. (B) Semiconducting materials. (C) Magnetic materials. (D) Ferroelectric materials.

Description : Dielectric materials are (A) Insulating materials. (B) Semiconducting materials. (C) Magnetic materials. (D) Ferroelectric materials.

Last Answer : (A) Insulating materials.

Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Description : Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Last Answer : (B) low resistivity conducting materials.

The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Description : The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Last Answer : (A) soft magnetic materials.

Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Description : Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Last Answer : (C) dielectric materials.

Plastics are (A) Good conductors of heat. (B) Good conductors of electricity. (C) Bad conductors of electricity. (D) High density.

Description : Plastics are (A) Good conductors of heat. (B) Good conductors of electricity. (C) Bad conductors of electricity. (D) High density.

Last Answer : (C) Bad conductors of electricity.

Thermocouples are used for the measurement of (A) humidity. (B) pressure. (C) temperature. (D) density.

Description : Thermocouples are used for the measurement of (A) humidity. (B) pressure. (C) temperature. (D) density.

Last Answer : (C) temperature.

The relative permeability of a paramagnetic substance is (A) unity. (B) slightly more than unity. (C) zero. (D) less than unity.

Description : The relative permeability of a paramagnetic substance is (A) unity. (B) slightly more than unity. (C) zero. (D) less than unity.

Last Answer : (B) slightly more than unity.

Dielectric constant of vacuum is (A) infinity. (B) 100. (C) one. (D) zero.

Description : Dielectric constant of vacuum is (A) infinity. (B) 100. (C) one. (D) zero.

Last Answer : (C) one.

The dielectric constant of air is practically taken as (A) more than unity. (B) unity. (C) less than unity. (D) zero.

Description : The dielectric constant of air is practically taken as (A) more than unity. (B) unity. (C) less than unity. (D) zero.

Last Answer : (B) unity.

Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Description : Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Last Answer : (D) Brass.

Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Description : Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Last Answer : (A) Nichrome

Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Description : Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Last Answer : (C) Tungsten.

The most malleable, ductile low resistivity material is (A) Copper. (B) Aluminium. (C) Silver. (D) Iron.

Description : The most malleable, ductile low resistivity material is (A) Copper. (B) Aluminium. (C) Silver. (D) Iron.

Last Answer : (C) Silver.

The material with lowest resistivity is (A) constantan. (B) silver. (C) manganin. (D) nichrome.

Description : The material with lowest resistivity is (A) constantan. (B) silver. (C) manganin. (D) nichrome.

Last Answer : (B) silver.

Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Description : Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Last Answer : (A) Ductility.

The body protein after eighteen years (A) Remains unchanged (B) Is decomposed only slightly at intervals of one month (C) Is in a constant state of flux (D) Is used only for energy requirement

Description : The body protein after eighteen years (A) Remains unchanged (B) Is decomposed only slightly at intervals of one month (C) Is in a constant state of flux (D) Is used only for energy requirement

Last Answer : Answer : C

Find the magnetic field intensity of a material with flux density of 24 units in air(in 10 6 order) a) 19.09 b) 21 c) 25 d) 26.78

Description : Find the magnetic field intensity of a material with flux density of 24 units in air(in 10 6 order) a) 19.09 b) 21 c) 25 d) 26.78

Last Answer : a) 19.09

Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic lines of force can penetrate a medium (C) Permeability is expressed as the ratio of the magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Description : Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic ... magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Last Answer : Answer: Option D

A material which is slightly repelled by a magnetic field is known as (a) ferromagnetic material (b) diamagnetic material (c) paramagnetic material (d) conducting material

Description : A material which is slightly repelled by a magnetic field is known as (a) ferromagnetic material (b) diamagnetic material (c) paramagnetic material (d) conducting material

Last Answer : (b) diamagnetic material

Find the current density on the conductor surface when a magnetic field H = 3cos x i + zcos x j A/m, for z>0 and zero, otherwise is applied to a perfectly conducting surface in xy plane. a) cos x i b) –cos x i c) cos x j d) –cos x j

Description : Find the current density on the conductor surface when a magnetic field H = 3cos x i + zcos x j A/m, for z>0 and zero, otherwise is applied to a perfectly conducting surface in xy plane. a) cos x i b) –cos x i c) cos x j d) –cos x j

Last Answer : b) –cos x i

State the functions of a fuse. Mention the desirable properties of fuse materials.

Description : State the functions of a fuse. Mention the desirable properties of fuse materials.

Last Answer : Ans: Fuse is a protective device, which consists of a thin wire or strip. This wire or strip is placed with the circuit it has to protect, so that the circuit-current flows through it. When ... silver and silver alloys are used of lower ratings. Copper alloys are used in fuses of higher ratings.

If a ferromagnetic material is heated upto Curie temperature, it becomes

Description : If a ferromagnetic material is heated upto Curie temperature, it becomes (a) Permanent magnet (b) Anti-ferromagnetic material (c) Diamagnetic material (d) Paramagnetic material 

Last Answer : Paramagnetic material

Find the electric field applied on a system with electrons having a velocity 5m/s subjected to a magnetic flux of 3.6 units. a) 15 b) 18 c) 1.38 d) 0.72

Description : Find the electric field applied on a system with electrons having a velocity 5m/s subjected to a magnetic flux of 3.6 units. a) 15 b) 18 c) 1.38 d) 0.72

Last Answer : b) 18

If the length of a cable is doubled, its capacitance (a) becomes one-fourth (b) becomes one-half (c) becomes double (d) remains unchanged

Description : If the length of a cable is doubled, its capacitance (a) becomes one-fourth (b) becomes one-half (c) becomes double (d) remains unchanged

Last Answer : (c) becomes double

The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Description : The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Last Answer : D) Covalent

What is a modular system? List the important properties of a modular system.

Description : What is a modular system? List the important properties of a modular system.

Last Answer : Ans: A modular system consists of well defined manageable units to well defined interfaces among them. Desirable properties are Each module is a well defined subsystem useful to others Each module ... modules Modules should be easier to use than build Modules should have a simple interface

Give four examples of natural insulating materials.

Description : Give four examples of natural insulating materials.

Last Answer : Ans: Examples of the natural insulating materials are cotton, rubber, wood, mica.

Classify plastic materials into two categories, describe their important properties and give two examples of each.

Description : Classify plastic materials into two categories, describe their important properties and give two examples of each.

Last Answer : Ans: Plastic materials can be classified into thermoplastic and thermosetting plastics. Thermoplastic materials:- The properties of these plastic materials do not change considerably if they are melted ... forming elastic threads and films. Examples are Phenol formaldehyde (Bakelite), Epoxy resins.

Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Description : Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Last Answer : (B) Resistivity

Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Description : Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Last Answer : (A) Negative

Atoms with four valence electrons are good conductors. (A) True (B) False

Description : Atoms with four valence electrons are good conductors. (A) True (B) False

Last Answer : (B) False

Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Description : Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Last Answer : (C) A large energy gap.