Description : IS-95 uses which modulation technique? a) GMSK b) BPSK c) QAM d) AFSK
Last Answer : b) BPSK
Description : Which modulation technique is used by GSM? a) GMSK b) BPSK c) QPSK d) GFSK
Last Answer : a) GMSK
Description : Which modulation scheme is used by Bluetooth? a) DQPSK b) MSK c) GFSK d) BPSK
Last Answer : c) GFSK
Description : Which one of the following 2G standard is used in Japan? a) IS-136 b) GSM c) PDC d) AMPS
Last Answer : c) PDC
Description : How many voice channels are supported for each 30 KHz radio channel in IS-136? a) Eight b) Thirty c) Three d) Sixteen
Last Answer : c) Three
Description : Popular 2G CDMA standard IS-95 is also known as ______________ a) CdmaOne b) CdmaTwo c) IS-136 d) IS-95B
Last Answer : a) CdmaOne
Description : Which of the following is a CDMA standard of second generation network? a) IS-95 b) IS-136 c) ETACS d) EDGE
Last Answer : a) IS-95
Description : Which one is not a TDMA standard of second generation networks? a) GSM b) IS-136 c) AMPS d) PDC
Last Answer : c) AMPS
Description : UMTS does not has backward compatibility with ____________ a) GSM b) IS-136 c) IS-95 d) GPRS
Last Answer : c) IS-95
Description : Which of the following leads to the 3G evolution of GSM, IS-136 and PDC systems? a) W-CDMA b) GPRS c) EDGE d) HSCSD
Last Answer : a) W-CDMA
Description : Which is one of the disadvantages of 2G standards? a) Short Messaging Service (SMS) b) Digital modulation c) Limited capacity d) Limited Internet Browsing
Last Answer : d) Limited Internet Browsing
Description : Which of the following is the world’s first cellular system to specify digital modulation and network level architecture? a) GSM b) AMPS c) CDMA d) IS-54
Last Answer : a) GSM
Description : UMTS use which multiple access technique? a) CDMA b) TDMA c) FDMA d) SDMA
Last Answer : a) CDMA
Description : Which of the following spread spectrum techniques were used in the original IEEE 802.11 standard? a) FHSS and DSSS b) THSS and FHSS c) THSS and DSSS d) Hybrid technique
Last Answer : a) FHSS and DSSS
Description : _____ is used for transmission of packets in the cellular switched architecture. a) Packet switching techniques b) Circuit switching techniques c) Packet and circuit switched technique d) Datagram technique
Last Answer : a) Packet switching techniques
Description : The 2G GSM technology uses a carrier separation of _____________ a) 1.25 MHz b) 200 KHz c) 30 KHz d) 300 KHz
Last Answer : b) 200 KHz
Description : Which of the following is not backward compatible with Cdma2000? a) Cdma2000 1xRTT b) Cdma2000 3xRTT c) Cdma2000 1xEV-DO d) Cdma2000 1xEV-DT
Last Answer : c) Cdma2000 1xEV-DO
Description : What are the two options provided by Cdma2000 1xEV? a) Cdma2000 1xRTT. Cdma2000 3xRTT b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV c) Cdma2000 1xEV-DT, Cdma2000 1xEV-DO d) Cdma2000 1xRTT, Cdma2000 1xEV-DV
Last Answer : b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV
Description : How is bandwidth increased in Cdma2000? a) Clubbing adjacent radio channels b) Changing the hardware of base stations c) Change of spectrum d) Change of RF equipment
Last Answer : a) Clubbing adjacent radio channels
Description : Cdma2000 1xEV was developed by ________ a) Motorola b) AT&T Laboratories c) Qualcomm d) NTT
Last Answer : c) Qualcomm
Description : Which of the following is not a characteristic of Cdma2000? a) Adaptable baseband signalling rates b) Adaptable baseband chipping rates c) Multicarrier technologies d) OFDMA
Last Answer : d) OFDMA
Description : Cdma2000 works in TDD mode only. a) True b) False
Last Answer : b) False
Description : How many users are supported by Cdma2000 1X in comparison to 2G CDMA standard? a) Half b) Twice c) Six times d) Ten times
Last Answer : b) Twice
Description : Within ITU IMT-2000 body, Cdma2000 1xRTT is also known as ____________ a) Cdma2000 1xEV-DO b) Cdma2000 1xEV-DV c) IS-95B d) G3G-MC-CDMA-1X
Last Answer : d) G3G-MC-CDMA-1X
Description : Which of the following the first 3G CDMA air interface? a) IS-95 b) IS-95B c) Cdma2000 1xRTT d) CdmaOne
Last Answer : c) Cdma2000 1xRTT
Description : 2G and 2.5G CDMA operators may selectively introduce 3G capabilities at each cell without changing entire base stations and reallocate spectrums. a) True b) False
Last Answer : a) True
Description : Which of the following has no backward compatibility with 3G Cdma2000? a) IS-95 b) GPRS c) IS-95A d) IS-95B
Last Answer : b) GPRS
Description : 2G CDMA standard, IS-95, was proposed by which company? a) Nippon Telephone and Telegraph (NTT) b) Qualcomm c) Bellcore and Motorola d) AT&T Bell Laboratories
Last Answer : b) Qualcomm
Description : GSM (Global System for Mobile) was earlier also known as _____________ a) Group System Mobile b) Global Special Meaning c) Group Special Mobile d) Global Special Mobile
Last Answer : c) Group Special Mobile
Description : How many users are supported in IS-95 for each 1.25 MHz? a) Eight b) Sixty four c) Sixteen d) Twenty five
Last Answer : b) Sixty four
Description : How many users or voice channels are supported for each 200 KHz channel in GSM? a) Eight b) Three c) Sixty four d) Twelve
Last Answer : a) Eight
Description : Which of the following multiple access techniques are used by second generation cellular systems? a) FDMA/FDD and TDMA/FDD c c) FDMA/FDD and CDMA/FDD d) FDMA/FDD only
Last Answer : b) TDMA/FDD and CDMA/FDD
Description : Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error
Last Answer : b) Quantization error
Description : In PCM encoding, quantization level varies as a function of ________ a) Frequency b) Amplitude c) Square of frequency d) Square of amplitude
Last Answer : b) Amplitude
Description : Quantization noise can be reduced by ________ the number of levels. a) Decreasing b) Increasing c) Doubling d) Squaring
Last Answer : b) Increasing
Description : The length of the code-word obtained by encoding quantized sample is equal to a) l=log(to the base 2)L b) l=log(to the base 10)L c) l=2log(to the base 2)L d) l=log(to the base 2)L/2
Last Answer : a) l=log(to the base 2)L
Description : The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization
Last Answer : b) PCM signal
Description : Which protocol is commonly used to retrieve email from a mail server? a) FTP b) IMAP c) HTML d) TELNET
Last Answer : b) IMAP
Description : Which is a link layer protocol? a) ARP b) TCP c) UDP d) HTTP
Last Answer : b) TCP
Description : In IPv4, service type of service in header field, first 3 bits are called ______ a) Type of service b) Code bits c) Sync bits d) Precedence bits
Last Answer : d) Precedence bits
Description : In IPv4 layer, datagram is of ________ a) Fixed length b) Variable length c) Global length d) Zero length
Last Answer : b) Variable length
Description : Header of datagram in IPv4 has _________ a) 0 to 20 bytes b) 20 to 40 bytes c) 20 to 60 bytes d) 20 to 80 bytes
Last Answer : c) 20 to 60 bytes
Description : Network layer at source is responsible for creating a packet from data coming from another ________ a) Station b) Link c) Node d) Protocol
Last Answer : d) Protocol
Description : In version field of IPv4 header, when machine is using some other version of IPv4 then datagram is __________ a) Discarded b) Accepted c) Interpreted d) Interpreted incorrectly
Last Answer : a) Discarded
Description : Checksum is used in Internet by several protocols although not at the _________ a) Session layer b) Transport layer c) Network layer d) Data link layer
Last Answer : d) Data link layer
Description : An internet is a __________ a) Collection of WANS b) Network of networks c) Collection of LANS d) Collection of identical LANS and WANS
Last Answer : b) Network of networks
Description : Protocols are set of rules to govern _________ a) Communication b) Standard c) Metropolitan communication d) Bandwidth
Last Answer : a) Communication
Description : Several protocols for upper layers in bluetooth use _________ a) UDP b) HSP c) ITC d) L2CAP
Last Answer : d) L2CAP
Description : How much increase in spectral efficiency is provided by W-CDMA in comparison to GSM? a) Two times b) Three times c) No increase d) Six times
Last Answer : d) Six times
Description : W-CDMA requires a complete change of RF equipment at each base station. a) True b) False