Description : W-CDMA works in FDD mode only. a) True b) False
Last Answer : b) False
Description : Which of the following scheme is used by Bluetooth? a) Frequency hopping TDD scheme b) Frequency hopping FDD scheme c) DSSS TDD scheme d) DSSS FDD scheme
Last Answer : a) Frequency hopping TDD scheme
Description : Which of the following is not backward compatible with Cdma2000? a) Cdma2000 1xRTT b) Cdma2000 3xRTT c) Cdma2000 1xEV-DO d) Cdma2000 1xEV-DT
Last Answer : c) Cdma2000 1xEV-DO
Description : What are the two options provided by Cdma2000 1xEV? a) Cdma2000 1xRTT. Cdma2000 3xRTT b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV c) Cdma2000 1xEV-DT, Cdma2000 1xEV-DO d) Cdma2000 1xRTT, Cdma2000 1xEV-DV
Last Answer : b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV
Description : How is bandwidth increased in Cdma2000? a) Clubbing adjacent radio channels b) Changing the hardware of base stations c) Change of spectrum d) Change of RF equipment
Last Answer : a) Clubbing adjacent radio channels
Description : Cdma2000 1xEV was developed by ________ a) Motorola b) AT&T Laboratories c) Qualcomm d) NTT
Last Answer : c) Qualcomm
Description : Which of the following is not a characteristic of Cdma2000? a) Adaptable baseband signalling rates b) Adaptable baseband chipping rates c) Multicarrier technologies d) OFDMA
Last Answer : d) OFDMA
Description : How many users are supported by Cdma2000 1X in comparison to 2G CDMA standard? a) Half b) Twice c) Six times d) Ten times
Last Answer : b) Twice
Description : Within ITU IMT-2000 body, Cdma2000 1xRTT is also known as ____________ a) Cdma2000 1xEV-DO b) Cdma2000 1xEV-DV c) IS-95B d) G3G-MC-CDMA-1X
Last Answer : d) G3G-MC-CDMA-1X
Description : Which of the following the first 3G CDMA air interface? a) IS-95 b) IS-95B c) Cdma2000 1xRTT d) CdmaOne
Last Answer : c) Cdma2000 1xRTT
Description : Which of the following has no backward compatibility with 3G Cdma2000? a) IS-95 b) GPRS c) IS-95A d) IS-95B
Last Answer : b) GPRS
Description : Which of the following 3G standard is used in Japan? a) Cdma2000 b) TD-SCDMA c) UMTS d) UTRA
Last Answer : c) UMTS
Description : Which of the following is not a standard of 3G? a) UMTS b) Cdma2000 c) TD-SCDMA d) LTE
Last Answer : d) LTE
Description : What is 3GPP2? a) Project based on W-CDMA b) Project based on cdma2000 c) Project based on 2G standards d) Project based on 2.5G standards
Last Answer : b) Project based on cdma2000
Description : hat is 3GPP? a) Project based on W-CDMA b) Project based on cdma2000 c) Project based on 2G standards d) Project based on 2.5G standards
Last Answer : a) Project based on W-CDMA
Description : Which of the following leads to evolution of 3G networks in CDMA systems? a) IS-95 b) IS-95B c) CdmaOne d) Cdma2000
Last Answer : d) Cdma2000
Description : PCS/PCN provides only wired communication. a) True b) False
Description : Which one of the following event is not possible in wireless LAN? a) collision detection b) acknowledgement of data frames c) multi-mode data transmission d) connection to wired networks
Last Answer : a) collision detection
Description : A wireless network interface controller can work in _______ a) infrastructure mode b) ad-hoc mode c) both infrastructure mode and ad-hoc mode d) WDS mode
Last Answer : c) both infrastructure mode and ad-hoc mode
Description : 2G and 2.5G CDMA operators may selectively introduce 3G capabilities at each cell without changing entire base stations and reallocate spectrums. a) True b) False
Last Answer : a) True
Description : W-CDMA requires a complete change of RF equipment at each base station. a) True b) False
Description : The price of WLAN hardware is more than 3G telephones and fixed wireless equipment. a) True b) False
Description : WLANs use high power levels and generally require a license for spectrum use. a) True b) False
Description : Wireless networks are extremely hostile and random nature of radio channel. a) True b) False
Description : At the base station, the air interface portion of mobile transmission is passed to MSC. a) True b) False
Description : MSCs provide connectivity between PSTN and the base stations. a) True b) False
Description : Circuit switching has more advantage than packet switching for PCS. a) True b) False
Description : AIN has different telephone numbers for both wireline and wireless services. a) True b) False
Description : Group of superframes in GSM is called multiframe. a) True b) False
Description : Which of the following multiple access techniques are used by second generation cellular systems? a) FDMA/FDD and TDMA/FDD c c) FDMA/FDD and CDMA/FDD d) FDMA/FDD only
Last Answer : b) TDMA/FDD and CDMA/FDD
Description : In wireless distribution system __________ a) multiple access point are inter-connected with each other b) there is no access point c) only one access point exists d) access points are not required
Last Answer : a) multiple access point are inter-connected with each other
Description : The 2G GSM technology uses a carrier separation of _____________ a) 1.25 MHz b) 200 KHz c) 30 KHz d) 300 KHz
Last Answer : b) 200 KHz
Description : Which one of the following 2G standard is used in Japan? a) IS-136 b) GSM c) PDC d) AMPS
Last Answer : c) PDC
Description : 2G CDMA standard, IS-95, was proposed by which company? a) Nippon Telephone and Telegraph (NTT) b) Qualcomm c) Bellcore and Motorola d) AT&T Bell Laboratories
Last Answer : b) Qualcomm
Description : GSM (Global System for Mobile) was earlier also known as _____________ a) Group System Mobile b) Global Special Meaning c) Group Special Mobile d) Global Special Mobile
Last Answer : c) Group Special Mobile
Description : Which is one of the disadvantages of 2G standards? a) Short Messaging Service (SMS) b) Digital modulation c) Limited capacity d) Limited Internet Browsing
Last Answer : d) Limited Internet Browsing
Description : IS-136 uses which modulation technique? a) π/4 DQPSK b) BPSK c) GMSK d) AFSK
Last Answer : a) π/4 DQPSK
Description : IS-95 uses which modulation technique? a) GMSK b) BPSK c) QAM d) AFSK
Last Answer : b) BPSK
Description : Which modulation technique is used by GSM? a) GMSK b) BPSK c) QPSK d) GFSK
Last Answer : a) GMSK
Description : How many users are supported in IS-95 for each 1.25 MHz? a) Eight b) Sixty four c) Sixteen d) Twenty five
Last Answer : b) Sixty four
Description : How many voice channels are supported for each 30 KHz radio channel in IS-136? a) Eight b) Thirty c) Three d) Sixteen
Last Answer : c) Three
Description : How many users or voice channels are supported for each 200 KHz channel in GSM? a) Eight b) Three c) Sixty four d) Twelve
Last Answer : a) Eight
Description : Popular 2G CDMA standard IS-95 is also known as ______________ a) CdmaOne b) CdmaTwo c) IS-136 d) IS-95B
Last Answer : a) CdmaOne
Description : Which of the following is a CDMA standard of second generation network? a) IS-95 b) IS-136 c) ETACS d) EDGE
Last Answer : a) IS-95
Description : Which one is not a TDMA standard of second generation networks? a) GSM b) IS-136 c) AMPS d) PDC
Last Answer : c) AMPS
Description : Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error
Last Answer : b) Quantization error
Description : In PCM encoding, quantization level varies as a function of ________ a) Frequency b) Amplitude c) Square of frequency d) Square of amplitude
Last Answer : b) Amplitude
Description : Quantization noise can be reduced by ________ the number of levels. a) Decreasing b) Increasing c) Doubling d) Squaring
Last Answer : b) Increasing
Description : The length of the code-word obtained by encoding quantized sample is equal to a) l=log(to the base 2)L b) l=log(to the base 10)L c) l=2log(to the base 2)L d) l=log(to the base 2)L/2
Last Answer : a) l=log(to the base 2)L
Description : The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization
Last Answer : b) PCM signal