Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW
by

1 Answer

Answer :

c. 6.81 KW
by

Related questions

Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Description : Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Last Answer : b. 163.5 KW

A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Description : A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Last Answer : b. 11.286 J

A mass of 5 kg moves on a smooth horizontal plane with a speed of 8 m/s attached to a fixed point on the plane by a string of length 4m. Tension in the string is a.785 b.80N c.392.4N d.None of the above e.Tapered bearing

Description : A mass of 5 kg moves on a smooth horizontal plane with a speed of 8 m/s attached to a fixed point on the plane by a string of length 4m. Tension in the string is a.785 b.80N c.392.4N d.None of the above e.Tapered bearing

Last Answer : b. 80N

M.I. of sphere of 0.5 m radius about a mutually perpendicular axis (Z-axis) when its M.I. about X-axis and Y-axis are 50 kgm2 and 50 kgm2 is a.50 Kgm2 b.Tapered bearing c.100 Kgm2 d.25 Kgm2 e.12.5 Kgm2

Description : M.I. of sphere of 0.5 m radius about a mutually perpendicular axis (Z-axis) when its M.I. about X-axis and Y-axis are 50 kgm2 and 50 kgm2 is a.50 Kgm2 b.Tapered bearing c.100 Kgm2 d.25 Kgm2 e.12.5 Kgm2

Last Answer : a. 50 Kgm2

Moment of Inertia of triangular section about an axis passing through its base is given by a.bh3/12 b.bh3/32 c.bh3/36 d.None of the above e.Tapered bearing

Description : Moment of Inertia of triangular section about an axis passing through its base is given by a.bh3/12 b.bh3/32 c.bh3/36 d.None of the above e.Tapered bearing

Last Answer : a. bh3/12

A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is a.500 KJ b.50.96 KJ c.101.92 KJ d.None of the above e.Tapered bearing

Description : A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is a.500 KJ b.50.96 KJ c.101.92 KJ d.None of the above e.Tapered bearing

Last Answer : a. 500 KJ

Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Description : Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Last Answer : e. Tapered bearing

Work done by a body of mass 100 kg moving along a circular path of radius 2 m with a uniform velocity of 10 m/sec is a.5000 J b.2500 J c.509.68 J d.None of the above e.Tapered bearing

Description : Work done by a body of mass 100 kg moving along a circular path of radius 2 m with a uniform velocity of 10 m/sec is a.5000 J b.2500 J c.509.68 J d.None of the above e.Tapered bearing

Last Answer : d. None of the above

In which case power required would be more a.In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec b.In lowering a weight of 100 kg along an a inclined plane at an angle of 45? with c.In lifting up a weight of 100 kg at a constant speed of 3 m/sec d.In lowering the weight at a constant speed of 3 m/sec e.In lowering the weight at a velocity of 3 m/sec and acceleration of 1 m/sec2

Description : In which case power required would be more a.In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec b.In lowering a weight of 100 kg along an a inclined plane ... speed of 3 m/sec e.In lowering the weight at a velocity of 3 m/sec and acceleration of 1 m/sec2

Last Answer : a. In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec

An electric motor drives a windless which hauls up a crate A of weight W = 500 kg up an inclined plane through a height of 10 m in 2 minutes. The torque acting on the windless is 25 kgm and the drum of the windless makes 30 rpm. The efficiency of the inclined plane would be a.0.41 b.0.61 c.0.265 d.0.5305 e.0.66

Description : An electric motor drives a windless which hauls up a crate A of weight W = 500 kg up an inclined plane through a height of 10 m in 2 minutes. The torque acting on the windless is 25 kgm and the drum of the ... The efficiency of the inclined plane would be a.0.41 b.0.61 c.0.265 d.0.5305 e.0.66

Last Answer : d. 0.5305

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is 15 N per kN, the maximum speed that the locomotive can attain on level track will be a.43 kmph b.83 kmph c.103 kmph d.107 dynes e.38 kmph

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is 15 N per kN, the maximum speed that the locomotive can attain on level track will be a.43 kmph b.83 kmph c.103 kmph d.107 dynes e.38 kmph

Last Answer : e. 38 kmph

The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Last Answer : e. 63 kmph

The moment of inertia of a hollow circular section whose external diameter is 8 cm and interial diameter is 6 cm about the axis passing through its centre is a.66.8 cm4 b.137.5 cm4 c.550 cm4 d.33.4 cm4 e.275 cm4

Description : The moment of inertia of a hollow circular section whose external diameter is 8 cm and interial diameter is 6 cm about the axis passing through its centre is a.66.8 cm4 b.137.5 cm4 c.550 cm4 d.33.4 cm4 e.275 cm4

Last Answer : b. 137.5 cm4

A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Description : A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Last Answer : e. Either of (A) and (C)

A cylindrical bar 10 metres long elongates 0.1 mm under a load. The strain in the material of the bar will be a.10--4 b.10--5 c.10--7 d.All of the above e.

Description : A cylindrical bar 10 metres long elongates 0.1 mm under a load. The strain in the material of the bar will be a.10--4 b.10--5 c.10--7 d.All of the above e.

Last Answer : b. 10--5

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

The displacement of a particle under going rectilinear motion along the x-axis is given by x = 2t3 + 21t2 + 60t + 6 metres. a.27 m/s2 b.18 m/s2 c.36 m/s2 d.9 m/s2 e.107 dynes

Description : The displacement of a particle under going rectilinear motion along the x-axis is given by x = 2t3 + 21t2 + 60t + 6 metres. a.27 m/s2 b.18 m/s2 c.36 m/s2 d.9 m/s2 e.107 dynes

Last Answer : d. 9 m/s2

For a self locking lifting machine, the efficiency must be a.50 percent b.100 percent c.more than 50 percent d.107 dynes e.less than 50 percent

Description : For a self locking lifting machine, the efficiency must be a.50 percent b.100 percent c.more than 50 percent d.107 dynes e.less than 50 percent

Last Answer : e. less than 50 percent

Which of the following is not a projectile? a.Bullet coming out of a revolver b.Arrow released from a bow c.Lifting of a balloon d.Throwing a cricket ball from one player to another e.None of the above

Description : Which of the following is not a projectile? a.Bullet coming out of a revolver b.Arrow released from a bow c.Lifting of a balloon d.Throwing a cricket ball from one player to another e.None of the above

Last Answer : d. Throwing a cricket ball from one player to another

Which of the following is an example of a projectile? a.Launching of a satellite b.Taking off of an aircraft c.Lifting of a balloon d.Throwing of a cricket ball by a player e.None of the above

Description : Which of the following is an example of a projectile? a.Launching of a satellite b.Taking off of an aircraft c.Lifting of a balloon d.Throwing of a cricket ball by a player e.None of the above

Last Answer : d. Throwing of a cricket ball by a player

The time required to stop a car moving with a velocity 20 m/sec within a distance of 40 m is equal to a.8 sec b.2 sec c.4 sec d.10 sec e.6 sec

Description : The time required to stop a car moving with a velocity 20 m/sec within a distance of 40 m is equal to a.8 sec b.2 sec c.4 sec d.10 sec e.6 sec

Last Answer : c. 4 sec

Which of the following is not a unit of energy? a.Joule b.kW c.N-m d.Electron volt e.Watt-hour

Description : Which of the following is not a unit of energy? a.Joule b.kW c.N-m d.Electron volt e.Watt-hour

Last Answer : b. kW

A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move down the plane to that when it move up the plane would be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Description : A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move ... be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Last Answer : b. 5 ? 7

A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Description : A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Last Answer : a. 5 metres

A imaginary planet has half the mass and half the radius of the earth. The acceleration of gravity at its surface would be a.9.8 m/s2 b.107 dynes c.4.9 m/s2 d.19.6 m/s2 e.2.45 m/s2

Description : A imaginary planet has half the mass and half the radius of the earth. The acceleration of gravity at its surface would be a.9.8 m/s2 b.107 dynes c.4.9 m/s2 d.19.6 m/s2 e.2.45 m/s2

Last Answer : d. 19.6 m/s2

The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Description : The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Last Answer : a. 628

A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Description : A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Last Answer : c. 15 kg

The angle of projection when the range is equal to the distance through which the particle would have fallen in order to acquire a velocity equal to the velocity of projection will be a.30? b.45? c.15? d.90? e.22

Description : The angle of projection when the range is equal to the distance through which the particle would have fallen in order to acquire a velocity equal to the velocity of projection will be a.30? b.45? c.15? d.90? e.22

Last Answer : c. 15?

The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Description : The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Last Answer : a. 30?

The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Last Answer : b. 30? with vertical

A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is 500 newtons, the maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Description : A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is ... maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Last Answer : b. 6750 N

A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is a.About 16? b.30? c.45? d.60? e.None of the above

Description : A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is a.About 16? b.30? c.45? d.60? e.None of the above

Last Answer : a. About 16?

A train moving at 60 kilometers per hour is struck by a bullet moving 1000 m/sec at right angles to the train. The direction with which the bullet appears to strike the train would be a.75? b.60? c.22 d.30? e.45?

Description : A train moving at 60 kilometers per hour is struck by a bullet moving 1000 m/sec at right angles to the train. The direction with which the bullet appears to strike the train would be a.75? b.60? c.22 d.30? e.45?

Last Answer : e. 45?

For the maximum range of a projectile the angle of projection should be a.90? b.30? c.22 d.45? e.15?

Description : For the maximum range of a projectile the angle of projection should be a.90? b.30? c.22 d.45? e.15?

Last Answer : d. 45?

The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum reactions on the ground would be a.3.6 tonnes b.2.4 tonnes c.4.0 tonnes d.4.8 tonnes e.4.4 tonnes

Description : The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum ... would be a.3.6 tonnes b.2.4 tonnes c.4.0 tonnes d.4.8 tonnes e.4.4 tonnes

Last Answer : e. 4.4 tonnes

A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Description : A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Last Answer : b. 20 rpm

A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in 10 sec. The distance between the locomotive and the wagons at this instant assuming that the forces acting on the train are unaltered would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Description : A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in ... would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Last Answer : d. 0.5 m

A stone is dropped into a deep shaft without any initial velocity. The sound of the stone hitting the bottom is heard after 4 seconds. If the velocity of sound is 330 m/sec the depth of the shaft will be a.33.1 m b.660 m c.165 m d.66.2 m e.330 m

Description : A stone is dropped into a deep shaft without any initial velocity. The sound of the stone hitting the bottom is heard after 4 seconds. If the velocity of sound is 330 m/sec the depth of the shaft will be a.33.1 m b.660 m c.165 m d.66.2 m e.330 m

Last Answer : d. 66.2 m

An iron sphere of mass 30 kg and an aluminium sphere of mass 10 kg, both having the same diameter are dropped vertically from a cliff. When they are 10 metrs from the ground, they have identical a.Accelerations b.Momenta c.Kinetic energies d.Potential energies e.All of the above

Description : An iron sphere of mass 30 kg and an aluminium sphere of mass 10 kg, both having the same diameter are dropped vertically from a cliff. When they are 10 metrs from the ground, they have identical a.Accelerations b.Momenta c.Kinetic energies d.Potential energies e.All of the above

Last Answer : a. Accelerations

A stone dropped from a baloon that was ascending at the rate of 30 ft/sec, reaches ground after 10 secs. The height of the baloon where stone was dropped was a.3420 ft b.107 dynes c.4520 ft d.2310 ft e.1310 ft

Description : A stone dropped from a baloon that was ascending at the rate of 30 ft/sec, reaches ground after 10 secs. The height of the baloon where stone was dropped was a.3420 ft b.107 dynes c.4520 ft d.2310 ft e.1310 ft

Last Answer : e. 1310 ft

A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Description : A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Last Answer : a. 3.9 m/sec

A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Description : A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Last Answer : c. 502 rad/min2

A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Description : A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Last Answer : a. 2 km

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Last Answer : a. 90

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Last Answer : c. 120

A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Description : A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Last Answer : c. 0.8 m

A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Description : A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Last Answer : a. 3