A cylindrical bar 10 metres long elongates 0.1 mm under a load. The strain in the material of the bar will be a.10--4 b.10--5 c.10--7 d.All of the above e.

A cylindrical bar 10 metres long elongates 0.1 mm under a load. The strain in the material of the bar will be a.10--4 b.10--5 c.10--7 d.All of the above e.
by

1 Answer

Answer :

b. 10--5
by

Related questions

If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an axial pull of 3000 kg, the stress developed, is (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Description : If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an  axial pull of 3000 kg, the stress developed, is  (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Last Answer : (C) 955.41 kg/cm2

If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an axial pull of 3000 kg, the stress developed, is (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Description : If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an  axial pull of 3000 kg, the stress developed, is  (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Last Answer : (C) 955.41 kg/cm2

The area under stress-strain curve represents a.Hardness of material b.Breaking strength of the material c.Energy required to cause failure d.Toughness of material e.Malleabbility of material

Description : The area under stress-strain curve represents a.Hardness of material b.Breaking strength of the material c.Energy required to cause failure d.Toughness of material e.Malleabbility of material

Last Answer : c. Energy required to cause failure

Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Description : Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Last Answer : c. 6.81 KW

The displacement of a particle under going rectilinear motion along the x-axis is given by x = 2t3 + 21t2 + 60t + 6 metres. a.27 m/s2 b.18 m/s2 c.36 m/s2 d.9 m/s2 e.107 dynes

Description : The displacement of a particle under going rectilinear motion along the x-axis is given by x = 2t3 + 21t2 + 60t + 6 metres. a.27 m/s2 b.18 m/s2 c.36 m/s2 d.9 m/s2 e.107 dynes

Last Answer : d. 9 m/s2

A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Description : A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Last Answer : a. 5 metres

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Description : The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Last Answer : a. 628

A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered by the piston to sliding with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Description : The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Last Answer : a. 1.885 m/sec

A body is executing simple harmonic motion of amplitude 1 cm. Its velocitywhile passing through the central point is 10 mm/sec. Its frequency will be a.2.99 rps b.2.22 rps c.1 rps d.1.59 rps e.1.77 rps

Description : A body is executing simple harmonic motion of amplitude 1 cm. Its velocitywhile passing through the central point is 10 mm/sec. Its frequency will be a.2.99 rps b.2.22 rps c.1 rps d.1.59 rps e.1.77 rps

Last Answer : c. 1 rps

The length of Seconds Pendulum is a.992 mm b.999 mm c.994 mm d.995 mm e.1000 mm

Description : The length of Seconds Pendulum is a.992 mm b.999 mm c.994 mm d.995 mm e.1000 mm

Last Answer : c. 994 mm

A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about a.6000 m b.1500 m c.3000 m d.2000 m e.1000 m

Description : A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about a.6000 m b.1500 m c.3000 m d.2000 m e.1000 m

Last Answer : a. 6000 m

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Description : A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Last Answer : c. 15 kg

A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Description : A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Last Answer : a. 3.9 m/sec

A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move down the plane to that when it move up the plane would be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Description : A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move ... be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Last Answer : b. 5 ? 7

A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is 500 newtons, the maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Description : A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is ... maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Last Answer : b. 6750 N

A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Description : A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Last Answer : a. 3

A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is proportional to the distance of the fibre from the load carrying end d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Description : In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is ... d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Last Answer : b. the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Last Answer : a. 90

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Last Answer : c. 120

A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Description : A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Last Answer : b. two places

The resultant of coplaner parallel forces is found by load line diagram, while the position is found by a.link polygen b.funicular polygon c.string polygon d.any of the above e.107 dynes

Description : The resultant of coplaner parallel forces is found by load line diagram, while the position is found by a.link polygen b.funicular polygon c.string polygon d.any of the above e.107 dynes

Last Answer : d. any of the above

Given that the area of a figure varies as square of mean ordinate. The area of the figure is 154 sq. cm when the mean ordinate is 7 cm. The area of the figure when mean ordinate is 10.5 cm will be a.364.9 cm b.364.5 cm c.360.6 cm d.346.5 cm e.356.3 cm

Description : Given that the area of a figure varies as square of mean ordinate. The area of the figure is 154 sq. cm when the mean ordinate is 7 cm. The area of the figure when mean ordinate is 10.5 cm will be a.364.9 cm b.364.5 cm c.360.6 cm d.346.5 cm e.356.3 cm

Last Answer : d. 346.5 cm

A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m

Description : A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m

Last Answer : c. 63.7 m

A body whose true weight is 14 kg appears to weigh 15 kg when weighed with the help of a spring balance in a moving lift. The acceleration of the lift at the time was a.1 m/sec2 b.0.7 m/sec2 c.0.5 m/sec2 d.1.4 m/sec2 e.0.35 m/sec2

Description : A body whose true weight is 14 kg appears to weigh 15 kg when weighed with the help of a spring balance in a moving lift. The acceleration of the lift at the time was a.1 m/sec2 b.0.7 m/sec2 c.0.5 m/sec2 d.1.4 m/sec2 e.0.35 m/sec2

Last Answer : b. 0.7 m/sec2

The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Description : The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Last Answer : b. 26.74

A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Description : A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Last Answer : c. 5 m/s

A body is pushed with a force of 10 N for 0.5 second. The impulse given to the body is a.107 dynes b.50 Ns c.3.5 Ns d.5 Ns e.2.5 Ns

Description : A body is pushed with a force of 10 N for 0.5 second. The impulse given to the body is a.107 dynes b.50 Ns c.3.5 Ns d.5 Ns e.2.5 Ns

Last Answer : d. 5 Ns

A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in 10 sec. The distance between the locomotive and the wagons at this instant assuming that the forces acting on the train are unaltered would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Description : A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in ... would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Last Answer : d. 0.5 m

A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending strain energy stored in the bar, is (A) 411 N mm (B) 511 N mm (C) 611 N mm (D) 711 N mm

Description : A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a  load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending  strain energy stored in the ... (A) 411 N mm  (B) 511 N mm  (C) 611 N mm  (D) 711 N mm 

Last Answer : (C) 611 N mm 

An electric motor drives a windless which hauls up a crate A of weight W = 500 kg up an inclined plane through a height of 10 m in 2 minutes. The torque acting on the windless is 25 kgm and the drum of the windless makes 30 rpm. The efficiency of the inclined plane would be a.0.41 b.0.61 c.0.265 d.0.5305 e.0.66

Description : An electric motor drives a windless which hauls up a crate A of weight W = 500 kg up an inclined plane through a height of 10 m in 2 minutes. The torque acting on the windless is 25 kgm and the drum of the ... The efficiency of the inclined plane would be a.0.41 b.0.61 c.0.265 d.0.5305 e.0.66

Last Answer : d. 0.5305

A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Description : A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of ... be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Last Answer : a. More than one

A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Description : A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Last Answer : d. 3.33 rad/sec

The sag in a tape 100 ft long held between two supports 99.8 ft aprat at the same level is a.3.32 ft b.0.98 ft c.2.73 ft d.1.87 ft e.107 dynes

Description : The sag in a tape 100 ft long held between two supports 99.8 ft aprat at the same level is a.3.32 ft b.0.98 ft c.2.73 ft d.1.87 ft e.107 dynes

Last Answer : c. 2.73 ft

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

A solid spherical ball rolls on a table. The momen' of inertia of the ball is given by 3/5 x mass x radius2. The ratio of translational and rotational kinetic energies for ball will be a.2 b.7?16 c.5?3 d.7?8 e.1

Description : A solid spherical ball rolls on a table. The momen' of inertia of the ball is given by 3/5 x mass x radius2. The ratio of translational and rotational kinetic energies for ball will be a.2 b.7?16 c.5?3 d.7?8 e.1

Last Answer : c. 5?3

The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Description : The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Last Answer : c. the acceleration is 1.2 m/s2

A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Description : A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Last Answer : b. 11.286 J

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

The shape of a suspended cable under its own weight is a.Catenary b.Elliptical c.Cycloidal d.Semi-circle e.Parabolic

Description : The shape of a suspended cable under its own weight is a.Catenary b.Elliptical c.Cycloidal d.Semi-circle e.Parabolic

Last Answer : a. Catenary

A particle is of wieght 8 kg. When it is allowed to fall under the force of gravity its momentum at the time t = 2 sec would be a.8 kg sec b.32 kg sec c.2 kg sec d.16 kg sec e.48 kg sec

Description : A particle is of wieght 8 kg. When it is allowed to fall under the force of gravity its momentum at the time t = 2 sec would be a.8 kg sec b.32 kg sec c.2 kg sec d.16 kg sec e.48 kg sec

Last Answer : d. 16 kg sec

A rigid body is suspended vertically at a point and oscillates with a small amplitude under the action of the force of gravity. Such an arrangement is called a.Simple pendulum b.Rigid pendulum c.Second's pendulum d.Compound pendulum e.Newton's pendulum

Description : A rigid body is suspended vertically at a point and oscillates with a small amplitude under the action of the force of gravity. Such an arrangement is called a.Simple pendulum b.Rigid pendulum c.Second's pendulum d.Compound pendulum e.Newton's pendulum

Last Answer : d. Compound pendulum

Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Description : Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Last Answer : d. A ball at its highest point of its rise when thrown up

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Description : Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Last Answer : c. When we are ascending in a lift with acceleration of 4.9 m/s2

The centre of percussions is a.The point of application of the resultant of all the forces tending to cause a body to rotate about a central axis b.The point of application of the resultant of gravity and buoyancy forces of the body c.The same as centre of gravity d.The metacentre of the body e.The point in a body about which it can rotate horizontally and oscillates under the influence of gravity

Description : The centre of percussions is a.The point of application of the resultant of all the forces tending to cause a body to rotate about a central axis b.The point of application of the resultant ... .The point in a body about which it can rotate horizontally and oscillates under the influence of gravity

Last Answer : a. The point of application of the resultant of all the forces tending to cause a body to rotate about a central axis

A rigid body is in equilibrium under the action of these forces when a.These forces are equal b.The lines of action of these forces are parallel c.The lines of action of these forces meet in a point d.(A) and (B) above e.(B) and (C) above

Description : A rigid body is in equilibrium under the action of these forces when a.These forces are equal b.The lines of action of these forces are parallel c.The lines of action of these forces meet in a point d.(A) and (B) above e.(B) and (C) above

Last Answer : e. (B) and (C) above