In a torsion pendulum a.The body attached to the lower end of wire or rod must be elastic b.The clamp must be elastic c.The clamp must be elastic d.(A) and (B) above e.(A), (B) and (C) together

In a torsion pendulum a.The body attached to the lower end of wire or rod must be elastic b.The clamp must be elastic c.The clamp must be elastic d.(A) and (B) above e.(A), (B) and (C) together
by

1 Answer

Answer :

c. The clamp must be elastic
by

Related questions

A rigid body is suspended vertically at a point and oscillates with a small amplitude under the action of the force of gravity. Such an arrangement is called a.Simple pendulum b.Rigid pendulum c.Second's pendulum d.Compound pendulum e.Newton's pendulum

Description : A rigid body is suspended vertically at a point and oscillates with a small amplitude under the action of the force of gravity. Such an arrangement is called a.Simple pendulum b.Rigid pendulum c.Second's pendulum d.Compound pendulum e.Newton's pendulum

Last Answer : d. Compound pendulum

The length of Seconds Pendulum is a.992 mm b.999 mm c.994 mm d.995 mm e.1000 mm

Description : The length of Seconds Pendulum is a.992 mm b.999 mm c.994 mm d.995 mm e.1000 mm

Last Answer : c. 994 mm

The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Description : The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Last Answer : e. A particle moving in gravitational field

If air resistance is neglected, at the mid-point of its swing, the acceleration of the bob of a simple pendulum along its path is always a.Increasing b.Zero c.A cycloid d.Decreasing e.A minimum but not equal to zero

Description : If air resistance is neglected, at the mid-point of its swing, the acceleration of the bob of a simple pendulum along its path is always a.Increasing b.Zero c.A cycloid d.Decreasing e.A minimum but not equal to zero

Last Answer : d. Decreasing

Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Description : Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Last Answer : d. A ball at its highest point of its rise when thrown up

A particle is moving in Simple Harmonic Motion in a simple pendulum with some period of oscillation. Now in order to double the period of oscillation a.The length of pendulum should be quadrupled b.The length of pendulum should be doubled c.The mass of the bob should be halved d.The length of pendulum should be reduced to one fourth e.The mass of the bob should be doubled

Description : A particle is moving in Simple Harmonic Motion in a simple pendulum with some period of oscillation. Now in order to double the period of oscillation a.The length of pendulum should be quadrupled b.The ... length of pendulum should be reduced to one fourth e.The mass of the bob should be doubled

Last Answer : a. The length of pendulum should be quadrupled

A clock with a second pendulum is gaining 5 minutes a day. To correct it a.The eccentricity of bob with pendulum should be decreased b.The length of the pendulum should be decreased c.The length of pendulum should not be changed d.The length of the pendulum should be increased e.The eccentricity of bon with pendulum should be increased

Description : A clock with a second pendulum is gaining 5 minutes a day. To correct it a.The eccentricity of bob with pendulum should be decreased b.The length of the pendulum should be decreased c.The ... .The length of the pendulum should be increased e.The eccentricity of bon with pendulum should be increased

Last Answer : d. The length of the pendulum should be increased

The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Description : The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Last Answer : c. Frictional movement of a particle over a surface

A bob of simple pendulum oscillating in air is made to oscillate in oil. The time period will a.Increase b.Decrease c.Not change d.Decrease but reduction depends on viscosity of oil e.None of the above

Description : A bob of simple pendulum oscillating in air is made to oscillate in oil. The time period will a.Increase b.Decrease c.Not change d.Decrease but reduction depends on viscosity of oil e.None of the above

Last Answer : a. Increase

A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be a.Zero b.W c.W/2 d.2W e.None of the above

Description : A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be a.Zero b.W c.W/2 d.2W e.None of the above

Last Answer : c. W/2

In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Description : In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Last Answer : e. 25.5 m/s

A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Description : A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Last Answer : c. 5 m/s

For perfectly elastic bodies, the value of the coefficient of restitution is a.1 b.0.372 c.0.5 d.Zero e.Any value between 0 and 1

Description : For perfectly elastic bodies, the value of the coefficient of restitution is a.1 b.0.372 c.0.5 d.Zero e.Any value between 0 and 1

Last Answer : a. 1

For perfectly elastic bodies the value of the coefficient of restitution is a.0.707 b.0.5 c.1 d.0.25 e.Zero

Description : For perfectly elastic bodies the value of the coefficient of restitution is a.0.707 b.0.5 c.1 d.0.25 e.Zero

Last Answer : a. 0.707

A mass of 5 kg moves on a smooth horizontal plane with a speed of 8 m/s attached to a fixed point on the plane by a string of length 4m. Tension in the string is a.785 b.80N c.392.4N d.None of the above e.Tapered bearing

Description : A mass of 5 kg moves on a smooth horizontal plane with a speed of 8 m/s attached to a fixed point on the plane by a string of length 4m. Tension in the string is a.785 b.80N c.392.4N d.None of the above e.Tapered bearing

Last Answer : b. 80N

A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in 10 sec. The distance between the locomotive and the wagons at this instant assuming that the forces acting on the train are unaltered would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Description : A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in ... would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Last Answer : d. 0.5 m

The necessary condition of equilibrium of a body is a.The algebraic sum of horizontal components of all forces must be zero b.The algebraic sum of vertical components of all forces must be zero c.The algebraic sum of forces about a point must be zero d.All the above e.None of the above

Description : The necessary condition of equilibrium of a body is a.The algebraic sum of horizontal components of all forces must be zero b.The algebraic sum of vertical components of all forces must be zero c.The algebraic sum of forces about a point must be zero d.All the above e.None of the above

Last Answer : d. All the above

If three non-parallel forces hold a rigid body in equilibrium, they must a.be non-coneurrent b.be colinear c.107 dynes d.be equal in magnitude e.be concurrent

Description : If three non-parallel forces hold a rigid body in equilibrium, they must a.be non-coneurrent b.be colinear c.107 dynes d.be equal in magnitude e.be concurrent

Last Answer : e. be concurrent

The tension in the wire rope supporting a lift moving with a uniform velocity a.Is more when the lift is moving upwards b.Is more when the lift is moving downwards c.Is less when the lift is moving down-wards d.Is less when the lift is moving upwards e.Remains constant irrespective of the lift movement

Description : The tension in the wire rope supporting a lift moving with a uniform velocity a.Is more when the lift is moving upwards b.Is more when the lift is moving downwards c.Is less when the lift ... down-wards d.Is less when the lift is moving upwards e.Remains constant irrespective of the lift movement

Last Answer : e. Remains constant irrespective of the lift movement

A particle of mass M moves towards right with a velocity 2 V along the x-axis and another of mass 2 M with a velocity V towards left (- x axis). After the collision (they stick together on colliging) they will a.come to rest b.107 dynes c.move towards right d.may move in any direction e.move towards left

Description : A particle of mass M moves towards right with a velocity 2 V along the x-axis and another of mass 2 M with a velocity V towards left (- x axis). After the collision (they stick together on colliging) ... a.come to rest b.107 dynes c.move towards right d.may move in any direction e.move towards left

Last Answer : c. move towards right

At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Description : At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Last Answer : b. 90?

In the impact problems the following conditions must always be satisfied a.The total kinetic energy remains unchanged b.The total linear momentum remains unchanged c.The magnitude of the total linear momentum is multiplied by the coefficient of restitution d.The kinetic energy of the system is reduced by a factor proportional to the coefficient of restitution e.None of the above

Description : In the impact problems the following conditions must always be satisfied a.The total kinetic energy remains unchanged b.The total linear momentum remains unchanged c.The magnitude of the total linear ... is reduced by a factor proportional to the coefficient of restitution e.None of the above

Last Answer : b. The total linear momentum remains unchanged

For a perfect frame having 13 members the number of joints must be a.8 b.6 c.7 d.107 dynes e.9

Description : For a perfect frame having 13 members the number of joints must be a.8 b.6 c.7 d.107 dynes e.9

Last Answer : a. 8

For a self locking lifting machine, the efficiency must be a.50 percent b.100 percent c.more than 50 percent d.107 dynes e.less than 50 percent

Description : For a self locking lifting machine, the efficiency must be a.50 percent b.100 percent c.more than 50 percent d.107 dynes e.less than 50 percent

Last Answer : e. less than 50 percent

When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Description : When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Last Answer : c. equal in magnitude

How many coins 0.75 cm in diameter and 1/8 cm thick must be malted down to form a rectangular solid whose edges are 5 cm. 4 cm and 3 cm? a.584 b.1087 c.0.00001745 sec-1 d.1234 e.2174

Description : How many coins 0.75 cm in diameter and 1/8 cm thick must be malted down to form a rectangular solid whose edges are 5 cm. 4 cm and 3 cm? a.584 b.1087 c.0.00001745 sec-1 d.1234 e.2174

Last Answer : b. 1087

In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal a.the force applied on A must be equal to that on B b.at least one man on side B should be removed c.infinite force will be required to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Description : In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal ... to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Last Answer : c. infinite force will be required to be applied at both ends

In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is proportional to the distance of the fibre from the load carrying end d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Description : In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is ... d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Last Answer : b. the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis

A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Description : A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Last Answer : a. 3

In case of cantilever, irrespective of the type of loading the maximum bendry moment and maximum shear force occur at a.107 dynes b.Free end c.2/3 of the length, from the free end d.Centre of the beam e.Fixed end

Description : In case of cantilever, irrespective of the type of loading the maximum bendry moment and maximum shear force occur at a.107 dynes b.Free end c.2/3 of the length, from the free end d.Centre of the beam e.Fixed end

Last Answer : e. Fixed end

A column has its equivalent length equal to its length in case of a.one end fixed, other free b.both ends hinged c.one end hinged, other free d.107 dynes e.both end fixed

Description : A column has its equivalent length equal to its length in case of a.one end fixed, other free b.both ends hinged c.one end hinged, other free d.107 dynes e.both end fixed

Last Answer : b. both ends hinged

The necessary condition for the forces acting on a body to be in equilibrium is that these should be a.In the same direction b.Coplaner c.Similar in nature d.Should not meet at a point e.(B) and (D) above

Description : The necessary condition for the forces acting on a body to be in equilibrium is that these should be a.In the same direction b.Coplaner c.Similar in nature d.Should not meet at a point e.(B) and (D) above

Last Answer : e. (B) and (D) above

According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Description : According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Last Answer : e. same at every point in its line of action

A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Description : A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Last Answer : e. 4?/3 m/s

The ratio of moment of inertia of a circular body about x axis to that about y axis is a.? b.? c.1?4 d.1 e.

Description : The ratio of moment of inertia of a circular body about x axis to that about y axis is a.? b.? c.1?4 d.1 e.

Last Answer : e. 1

A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Description : A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Last Answer : c. 2.5 m/s

In the speed of rotation of earth decreases, the weight of the body will a.Decrease b.Remain unaltered c.Depends on speed ratio d.Cannot be ascertained on the basis the information given e.Increase

Description : In the speed of rotation of earth decreases, the weight of the body will a.Decrease b.Remain unaltered c.Depends on speed ratio d.Cannot be ascertained on the basis the information given e.Increase

Last Answer : c. Depends on speed ratio

Which of the following could be the unit of rotational inertia of a body in CGS system? a.cm4 b.gm-cm2 c.107 dynes d.kg-cm2 e.gm-cm4

Description : Which of the following could be the unit of rotational inertia of a body in CGS system? a.cm4 b.gm-cm2 c.107 dynes d.kg-cm2 e.gm-cm4

Last Answer : b. gm-cm2

When a body moves round a fixed axis it will have a.A motion of rotation and translation b.A circular motion c.A rotary motion d.A translatory motion e.A swinging motion

Description : When a body moves round a fixed axis it will have a.A motion of rotation and translation b.A circular motion c.A rotary motion d.A translatory motion e.A swinging motion

Last Answer : b. A circular motion

A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only

Description : A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only

Last Answer : c. is a two-force body

The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above

Description : The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above

Last Answer : d. Angle of repose

The resultant of a force acting on a body will be zero, if the body a.Rotates with uniform acceleration b.Moves along a curved path c.Rotates d.Does not rotate e.Rotates with uniform deceleration

Description : The resultant of a force acting on a body will be zero, if the body a.Rotates with uniform acceleration b.Moves along a curved path c.Rotates d.Does not rotate e.Rotates with uniform deceleration

Last Answer : d. Does not rotate

The periodic time of a body moving in Simple Harmonic Motion is a.Directly proportional to its angular velocity b.Directly proportional to the weight of the body c.Inversely proportional to the square of angular velocity d.Directly proportional to the momentum of swinging body e.Inversely proportional to the angular velocity

Description : The periodic time of a body moving in Simple Harmonic Motion is a.Directly proportional to its angular velocity b.Directly proportional to the weight of the body c.Inversely proportional to ... d.Directly proportional to the momentum of swinging body e.Inversely proportional to the angular velocity

Last Answer : e. Inversely proportional to the angular velocity

Kinetic friction is a.Maximum value of frictional force when a body is about to move b.Friction between two well lubricated bodies c.Friction force acting when the body is in motion d.Driction force which keeps a body in motion e.None of the above

Description : Kinetic friction is a.Maximum value of frictional force when a body is about to move b.Friction between two well lubricated bodies c.Friction force acting when the body is in motion d.Driction force which keeps a body in motion e.None of the above

Last Answer : c. Friction force acting when the body is in motion

The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Description : The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Last Answer : a. 1.885 m/sec

A body weighing 500 kg falls 8 cm and strikes a 500 kg/cm spring. The deformation of the spring will be a.?8 cm b.8 cm c.4 cm d.20.5 cm e.2 cm

Description : A body weighing 500 kg falls 8 cm and strikes a 500 kg/cm spring. The deformation of the spring will be a.?8 cm b.8 cm c.4 cm d.20.5 cm e.2 cm

Last Answer : c. 4 cm

A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?

Description : A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?

Last Answer : a. W sin2?

A body is pushed with a force of 10 N for 0.5 second. The impulse given to the body is a.107 dynes b.50 Ns c.3.5 Ns d.5 Ns e.2.5 Ns

Description : A body is pushed with a force of 10 N for 0.5 second. The impulse given to the body is a.107 dynes b.50 Ns c.3.5 Ns d.5 Ns e.2.5 Ns

Last Answer : d. 5 Ns

If the angle of friction is zero a body will experience a.Infinite friction b.Zero friction c.The force of friction will act normal to the plane d.The force of friction will act in the direction of motion e.None of the above

Description : If the angle of friction is zero a body will experience a.Infinite friction b.Zero friction c.The force of friction will act normal to the plane d.The force of friction will act in the direction of motion e.None of the above

Last Answer : b. Zero friction

The statement the resultant of the external forces applied to a body (rigid or non-rigid) composed of a system of particles is equivalent to the vector summation of the effective forces acting on all particles-is known as a.Corollary to Newton's laws of motion b.Principle of dynamics c.D' Alembert's principle d.Nowton's law e.Mohr's principle

Description : The statement the resultant of the external forces applied to a body (rigid or non-rigid) composed of a system of particles is equivalent to the vector summation of the effective forces acting on all ... motion b.Principle of dynamics c.D' Alembert's principle d.Nowton's law e.Mohr's principle

Last Answer : c. D' Alembert's principle