A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?

A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?
by

1 Answer

Answer :

a. W sin2?
by

Related questions

In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal a.the force applied on A must be equal to that on B b.at least one man on side B should be removed c.infinite force will be required to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Description : In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal ... to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Last Answer : c. infinite force will be required to be applied at both ends

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Description : A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Last Answer : c. 2.5 m/s

When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Description : When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Last Answer : e. 76?

Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the bodies b.107 dynes c.inversely proportional to the respective masses of the bodies d.directly proportional to the square of the respective masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Description : Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the ... masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Last Answer : c. inversely proportional to the respective masses of the bodies

A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Description : A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Last Answer : c. 5 m/s

If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Description : If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Last Answer : b. there is at least one couple acting on the beam

When all the forces acting on a body lie in one plane and their lines of action meet at one point, the forces a.constitute a moment b.constitute a couple c.are known as coplaner-concurrent forces. d.are known as non-coplaner forces e.107 dynes

Description : When all the forces acting on a body lie in one plane and their lines of action meet at one point, the forces a.constitute a moment b.constitute a couple c.are known as coplaner-concurrent forces. d.are known as non-coplaner forces e.107 dynes

Last Answer : c. are known as coplaner-concurrent forces.

A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is a.About 16? b.30? c.45? d.60? e.None of the above

Description : A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is a.About 16? b.30? c.45? d.60? e.None of the above

Last Answer : a. About 16?

A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

If four turms of rope around a horizontal post will hold a 100 kg weight with a pull of 1 kg, then a.107 dynes b.0.25 c.0.18 d.0.3 e.0.11

Description : If four turms of rope around a horizontal post will hold a 100 kg weight with a pull of 1 kg, then a.107 dynes b.0.25 c.0.18 d.0.3 e.0.11

Last Answer : c. 0.18

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

If a solid sphere rolls on a horizontal surface, then the ratio of its rotational kinetic energy to its total kinetic energy is a.1 ; 7 b.3 ; 7 c.107 dynes d.4 ; 7 e.2 ; 7

Description : If a solid sphere rolls on a horizontal surface, then the ratio of its rotational kinetic energy to its total kinetic energy is a.1 ; 7 b.3 ; 7 c.107 dynes d.4 ; 7 e.2 ; 7

Last Answer : e. 2 ; 7

A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Last Answer : c. 250

A particle of mass M moves towards right with a velocity 2 V along the x-axis and another of mass 2 M with a velocity V towards left (- x axis). After the collision (they stick together on colliging) they will a.come to rest b.107 dynes c.move towards right d.may move in any direction e.move towards left

Description : A particle of mass M moves towards right with a velocity 2 V along the x-axis and another of mass 2 M with a velocity V towards left (- x axis). After the collision (they stick together on colliging) ... a.come to rest b.107 dynes c.move towards right d.may move in any direction e.move towards left

Last Answer : c. move towards right

A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Description : A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Last Answer : c. 502 rad/min2

What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Description : What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Last Answer : c. 78.94 mts/sec2

A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Description : A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Last Answer : e. 7.64

A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating forward while going around a curve of radius equal to the maximum height attained by the ball c.107 dynes d.accelerating forwardA block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Last Answer : a. moving at constant velocity

According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Description : According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Last Answer : e. same at every point in its line of action

A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only

Description : A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only

Last Answer : c. is a two-force body

A body is pushed with a force of 10 N for 0.5 second. The impulse given to the body is a.107 dynes b.50 Ns c.3.5 Ns d.5 Ns e.2.5 Ns

Description : A body is pushed with a force of 10 N for 0.5 second. The impulse given to the body is a.107 dynes b.50 Ns c.3.5 Ns d.5 Ns e.2.5 Ns

Last Answer : d. 5 Ns

A block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height a.block A will have higher velocity than block B while hitting the ground b.block B will hit the ground earlier. c.both will hit the ground simultaneously d.block A will hit the ground earlier e.107 dynes

Description : A block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height a.block A will have higher velocity than block B while hitting the ... . c.both will hit the ground simultaneously d.block A will hit the ground earlier e.107 dynes

Last Answer : b. block B will hit the ground earlier.

Williot-Mohr diagram is used to determine a.slope of beams b.107 dynes c.deflection in beams d.deflection in trusses e.slope of trusses

Description : Williot-Mohr diagram is used to determine a.slope of beams b.107 dynes c.deflection in beams d.deflection in trusses e.slope of trusses

Last Answer : d. deflection in trusses

At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Description : At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Last Answer : b. 90?

TIES : STRUTS : a.purlins : piers b.angle : tee c.rolle support : hinge d.compression : tension e.107 dynes

Description : TIES : STRUTS : a.purlins : piers b.angle : tee c.rolle support : hinge d.compression : tension e.107 dynes

Last Answer : d. compression : tension

When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Description : When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Last Answer : c. equal in magnitude

A block slides down a frictionless incline making an angle ? with an elevator floor. The acceleration relative to the incline will be maximum when a.the elevator ascends at constant speed v b.the elevator descends at constant speed v c.107 dynes d.elevator descends with deceleration a e.the elevator descends with acceleration a

Description : A block slides down a frictionless incline making an angle ? with an elevator floor. The acceleration relative to the incline will be maximum when a.the elevator ascends at constant speed v b. ... speed v c.107 dynes d.elevator descends with deceleration a e.the elevator descends with acceleration a

Last Answer : d. elevator descends with deceleration a

When two concurrent and coplaner forces P and Q act at an angle of 180?, their resultant will be a a.moment equal to PQ b.couple c.(P-Q) d.107 dynes e.zero

Description : When two concurrent and coplaner forces P and Q act at an angle of 180?, their resultant will be a a.moment equal to PQ b.couple c.(P-Q) d.107 dynes e.zero

Last Answer : c. (P-Q)

Efficiency of a screw jack in maximum when its 31 helix angle, ? is a.45 + ?/2 b.107 dynes c.? d.45 - ?/2 e.45?

Description : Efficiency of a screw jack in maximum when its 31 helix angle, ? is a.45 + ?/2 b.107 dynes c.? d.45 - ?/2 e.45?

Last Answer : d. 45 - ?/2

What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Description : What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Last Answer : a. 0.35

An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Description : An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Last Answer : b. 6170 lb

A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Description : A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Last Answer : e. 1000 N

What is the maximum force, in Newtons, that will not cause tension? a.294 b.316 c.346 d.184 e.107 dynes

Description : What is the maximum force, in Newtons, that will not cause tension? a.294 b.316 c.346 d.184 e.107 dynes

Last Answer : a. 294

A compressure force in boom in above problem is a.107 dynes b.1096 kg c.886 kg d.693 kg e.1390 kg

Description : A compressure force in boom in above problem is a.107 dynes b.1096 kg c.886 kg d.693 kg e.1390 kg

Last Answer : e. 1390 kg

Impulse can be obtained from a.force-time diagram b.velocity-time diagram c.107 dynes d.force displacement diagram e.velocity-displacement diagram

Description : Impulse can be obtained from a.force-time diagram b.velocity-time diagram c.107 dynes d.force displacement diagram e.velocity-displacement diagram

Last Answer : a. force-time diagram

A 2 kg block is dropped from a height of 4 metre onto a spring of force constant k = 1960 N/m. The spring will be compressed through a.1 cm b.4.5 cm c.3 cm d.8 cm e.107 dynes

Description : A 2 kg block is dropped from a height of 4 metre onto a spring of force constant k = 1960 N/m. The spring will be compressed through a.1 cm b.4.5 cm c.3 cm d.8 cm e.107 dynes

Last Answer : d. 8 cm

ML2T-2 could be the dimension of a.107 dynes b.moment of force c.viscosity d.mass moment of inertia e.momentum

Description : ML2T-2 could be the dimension of a.107 dynes b.moment of force c.viscosity d.mass moment of inertia e.momentum

Last Answer : b. moment of force

In case of cantilever, irrespective of the type of loading the maximum bendry moment and maximum shear force occur at a.107 dynes b.Free end c.2/3 of the length, from the free end d.Centre of the beam e.Fixed end

Description : In case of cantilever, irrespective of the type of loading the maximum bendry moment and maximum shear force occur at a.107 dynes b.Free end c.2/3 of the length, from the free end d.Centre of the beam e.Fixed end

Last Answer : e. Fixed end

A boy and his dad put a rope around a tree and stand side by side. What force by the boy can resist a force of 800 N by the dad? a.231 b.246 c.192 d.107 dynes e.166

Description : A boy and his dad put a rope around a tree and stand side by side. What force by the boy can resist a force of 800 N by the dad? a.231 b.246 c.192 d.107 dynes e.166

Last Answer : e. 166

Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of bodies near the earth's equator (due to rotation of earth) is more than the velocities of particles at the pole c.107 dynes d.A cyclist should move along a zig-zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Description : Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of ... zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Last Answer : e. The density of milk decreases when cream is taken out of milk

A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.107 dynes b.i + j + k c.2i + 3j d.zero e.i - j - k

Description : A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.107 dynes b.i + j + k c.2i + 3j d.zero e.i - j - k

Last Answer : b. i + j + k

Using force, length and time as fundamental quantities, the dimensions of mass would be a.FL-2T+2 b.FL-1T+2 c.FL-1T+1 d.107 dynes e.FL-2T+1

Description : Using force, length and time as fundamental quantities, the dimensions of mass would be a.FL-2T+2 b.FL-1T+2 c.FL-1T+1 d.107 dynes e.FL-2T+1

Last Answer : b. FL-1T+2

A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be a.Zero b.W c.W/2 d.2W e.None of the above

Description : A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be a.Zero b.W c.W/2 d.2W e.None of the above

Last Answer : c. W/2

If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Description : If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Last Answer : d. (T1 - T2) w

A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Description : A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Last Answer : b. two places

If you want to stop the car in the shortest distance on an icy road, you should a.107 dynes b.not apply the brakes c.pump' the brakes d.push hard the brakes to lock the wheels e.push just hard enough to prevent slipping

Description : If you want to stop the car in the shortest distance on an icy road, you should a.107 dynes b.not apply the brakes c.pump' the brakes d.push hard the brakes to lock the wheels e.push just hard enough to prevent slipping

Last Answer : e. push just hard enough to prevent slipping

A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Description : A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Last Answer : e. 4?/3 m/s

Which of the following could be the unit of rotational inertia of a body in CGS system? a.cm4 b.gm-cm2 c.107 dynes d.kg-cm2 e.gm-cm4

Description : Which of the following could be the unit of rotational inertia of a body in CGS system? a.cm4 b.gm-cm2 c.107 dynes d.kg-cm2 e.gm-cm4

Last Answer : b. gm-cm2

Which of the following statement is incorrect? a.A body can have energy without having momentum b.A body cannot have kinetic energy without having momentum c.A body in motion will always have kinetic energy more than the potential energy d.None of the above e.107 dynes

Description : Which of the following statement is incorrect? a.A body can have energy without having momentum b.A body cannot have kinetic energy without having momentum c.A body in motion will always have kinetic energy more than the potential energy d.None of the above e.107 dynes

Last Answer : c. A body in motion will always have kinetic energy more than the potential energy