ML2T-2 could be the dimension of all of the following EXCEPT a.Energy b.Work c.107 dynes d.Power e.Torque

ML2T-2 could be the dimension of all of the following EXCEPT a.Energy b.Work c.107 dynes d.Power e.Torque
by

1 Answer

Answer :

d. Power
by

Related questions

ML2T-2 could be the dimension of a.107 dynes b.moment of force c.viscosity d.mass moment of inertia e.momentum

Description : ML2T-2 could be the dimension of a.107 dynes b.moment of force c.viscosity d.mass moment of inertia e.momentum

Last Answer : b. moment of force

The dimensions of power are a.ML2T3 b.ML2T2 c.MLT3 d.ML2T-3 e.107 dynes

Description : The dimensions of power are a.ML2T3 b.ML2T2 c.MLT3 d.ML2T-3 e.107 dynes

Last Answer : d. ML2T-3

The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Description : The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Last Answer : a. 628

The torque acting on a system is zero. Which of the following will be conserved? a.Angular velocity b.Linear momentum c.107 dynes d.Angular momentum e.Moment of inertia

Description : The torque acting on a system is zero. Which of the following will be conserved? a.Angular velocity b.Linear momentum c.107 dynes d.Angular momentum e.Moment of inertia

Last Answer : d. Angular momentum

The springs A and B are identical except that A is stiffer than B, that is KA > kB. If both the springs are stretched by the same amount a.more work will be expended on A than B b.same work will be expended in both springs. c.less work will be expended on A than B d.107 dynes e.

Description : The springs A and B are identical except that A is stiffer than B, that is KA > kB. If both the springs are stretched by the same amount a.more work will be expended on A than B b.same work will be expended in both springs. c.less work will be expended on A than B d.107 dynes e.

Last Answer : a. more work will be expended on A than B

Secondary stresses may be set up in frame due to any of the following reasons EXCEPT a.members not being straight b.self-weight of the members c.eccentricity of connections d.rigidity of the members e.107 dynes

Description : Secondary stresses may be set up in frame due to any of the following reasons EXCEPT a.members not being straight b.self-weight of the members c.eccentricity of connections d.rigidity of the members e.107 dynes

Last Answer : d. rigidity of the members

Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Description : Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Last Answer : c. When we are ascending in a lift with acceleration of 4.9 m/s2

A bullet is fired from a fifle. If the rifle recoils freely, the kinetic energy of the rifle a.will be the same as the kinetic energy of the bullet b.will be less than the kinetic energy of the bullet c.107 dynes d.will be more than the kinetic energy of the bullet e.

Description : A bullet is fired from a fifle. If the rifle recoils freely, the kinetic energy of the rifle a.will be the same as the kinetic energy of the bullet b.will be less than the kinetic energy of the bullet c.107 dynes d.will be more than the kinetic energy of the bullet e.

Last Answer : b. will be less than the kinetic energy of the bullet

Which of the following statement is incorrect? a.A body can have energy without having momentum b.A body cannot have kinetic energy without having momentum c.A body in motion will always have kinetic energy more than the potential energy d.None of the above e.107 dynes

Description : Which of the following statement is incorrect? a.A body can have energy without having momentum b.A body cannot have kinetic energy without having momentum c.A body in motion will always have kinetic energy more than the potential energy d.None of the above e.107 dynes

Last Answer : c. A body in motion will always have kinetic energy more than the potential energy

A particle in SHM while passing through mean position will have a.maximum kinetic energy and maximum potential energy b.107 dynes c.maximum kinetic energy and minimum potential energy d.average kinetic energy and average potential energy. e.minimum kinetic energy and maximum potential energy

Description : A particle in SHM while passing through mean position will have a.maximum kinetic energy and maximum potential energy b.107 dynes c.maximum kinetic energy and minimum potential energy d.average kinetic energy and average potential energy. e.minimum kinetic energy and maximum potential energy

Last Answer : c. maximum kinetic energy and minimum potential energy

Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of bodies near the earth's equator (due to rotation of earth) is more than the velocities of particles at the pole c.107 dynes d.A cyclist should move along a zig-zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Description : Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of ... zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Last Answer : e. The density of milk decreases when cream is taken out of milk

If a solid sphere rolls on a horizontal surface, then the ratio of its rotational kinetic energy to its total kinetic energy is a.1 ; 7 b.3 ; 7 c.107 dynes d.4 ; 7 e.2 ; 7

Description : If a solid sphere rolls on a horizontal surface, then the ratio of its rotational kinetic energy to its total kinetic energy is a.1 ; 7 b.3 ; 7 c.107 dynes d.4 ; 7 e.2 ; 7

Last Answer : e. 2 ; 7

A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Last Answer : c. 250

If for power transmission a gear train consisting of 8 gears is used, then a.the motion of driver and follower will be in the same direction b.the motion of driver and follower will be in the opposite directions c.either of (A) or (B) above d.None of the above e.107 dynes

Description : If for power transmission a gear train consisting of 8 gears is used, then a.the motion of driver and follower will be in the same direction b.the motion of driver and follower will be in the opposite directions c.either of (A) or (B) above d.None of the above e.107 dynes

Last Answer : b. the motion of driver and follower will be in the opposite directions

If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Description : If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Last Answer : d. (T1 - T2) w

According to Kepler's law of motion the square of the time period T of a planet around the sun is proportional to the a.mean distance b.square of the mean distance of planet from sun c.cube of the mean distance of planet from sun d.107 dynes e.3/2 power of the mean distance

Description : According to Kepler's law of motion the square of the time period T of a planet around the sun is proportional to the a.mean distance b.square of the mean distance of planet from sun c.cube of the mean distance of planet from sun d.107 dynes e.3/2 power of the mean distance

Last Answer : c. cube of the mean distance of planet from sun

The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is 15 N per kN, the maximum speed that the locomotive can attain on level track will be a.43 kmph b.83 kmph c.103 kmph d.107 dynes e.38 kmph

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is 15 N per kN, the maximum speed that the locomotive can attain on level track will be a.43 kmph b.83 kmph c.103 kmph d.107 dynes e.38 kmph

Last Answer : e. 38 kmph

If for power transmission a gear train consisting of 11 gears is used, then a.the motion of driver and follower will be in the same direction b.The motion of driver and follower will be in the opposite direction c.either of (A) or (B) above d.None of the above e.107 dynes

Description : If for power transmission a gear train consisting of 11 gears is used, then a.the motion of driver and follower will be in the same direction b.The motion of driver and follower will be in the opposite direction c.either of (A) or (B) above d.None of the above e.107 dynes

Last Answer : a. the motion of driver and follower will be in the same direction

The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Last Answer : e. 63 kmph

Which of the following could be the unit of rotational inertia of a body in CGS system? a.cm4 b.gm-cm2 c.107 dynes d.kg-cm2 e.gm-cm4

Description : Which of the following could be the unit of rotational inertia of a body in CGS system? a.cm4 b.gm-cm2 c.107 dynes d.kg-cm2 e.gm-cm4

Last Answer : b. gm-cm2

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Description : At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Last Answer : b. 90?

What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Description : What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Last Answer : a. 0.35

A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

Description : A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

Last Answer : e. 8

A block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height a.block A will have higher velocity than block B while hitting the ground b.block B will hit the ground earlier. c.both will hit the ground simultaneously d.block A will hit the ground earlier e.107 dynes

Description : A block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height a.block A will have higher velocity than block B while hitting the ... . c.both will hit the ground simultaneously d.block A will hit the ground earlier e.107 dynes

Last Answer : b. block B will hit the ground earlier.

An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Description : An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Last Answer : b. 6170 lb

A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Description : A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Last Answer : c. 5 m/s

According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Description : According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Last Answer : e. same at every point in its line of action

A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes

Description : A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes

Last Answer : a. at the highest position

A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves towards the axis of rotation c.jumps out from the platform d.accepts a heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Description : A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves ... heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Last Answer : d. accepts a heavy bag from one of his friends standing near by and holds it in his hand

If the distance to electric train is given by Fr = a + bv + cv2 In this equation constant c is likely to cover a.air resistance b.track resistance c.frictional resistance d.flange resistance e.107 dynes

Description : If the distance to electric train is given by Fr = a + bv + cv2 In this equation constant c is likely to cover a.air resistance b.track resistance c.frictional resistance d.flange resistance e.107 dynes

Last Answer : a. air resistance

A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Description : A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Last Answer : e. 1000 N

A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Description : A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Last Answer : c. 75,000 ft

Centroid of the are of circle shown in adjacement figure is a.r sin (?/2)/2 ?, 0 b.r sin (?)/?, 0 c.2 r sin (?/2)/?, 0 d.107 dynes e.2r sin (?)/?, 0

Description : Centroid of the are of circle shown in adjacement figure is a.r sin (?/2)/2 ?, 0 b.r sin (?)/?, 0 c.2 r sin (?/2)/?, 0 d.107 dynes e.2r sin (?)/?, 0

Last Answer : c. 2 r sin (?/2)/?, 0

What is the maximum force, in Newtons, that will not cause tension? a.294 b.316 c.346 d.184 e.107 dynes

Description : What is the maximum force, in Newtons, that will not cause tension? a.294 b.316 c.346 d.184 e.107 dynes

Last Answer : a. 294

A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Description : A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Last Answer : e. 4?/3 m/s

A compressure force in boom in above problem is a.107 dynes b.1096 kg c.886 kg d.693 kg e.1390 kg

Description : A compressure force in boom in above problem is a.107 dynes b.1096 kg c.886 kg d.693 kg e.1390 kg

Last Answer : e. 1390 kg

A non-reversible machine has efficiency a.less than 50% b.nearly 100% c.between 75% and 99% d.more than 50% e.107 dynes

Description : A non-reversible machine has efficiency a.less than 50% b.nearly 100% c.between 75% and 99% d.more than 50% e.107 dynes

Last Answer : a. less than 50%

In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is proportional to the distance of the fibre from the load carrying end d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Description : In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is ... d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Last Answer : b. the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis

The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Description : The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Last Answer : c. the acceleration is 1.2 m/s2

A apinning ballet dancer draws her arms close to her chest. She will now a.107 dynes b.spin at the same rate c.spin faster d.spin slower e.stop spinning

Description : A apinning ballet dancer draws her arms close to her chest. She will now a.107 dynes b.spin at the same rate c.spin faster d.spin slower e.stop spinning

Last Answer : d. spin slower

A man is standing ner the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platorm will decrease if he a.extends his arms outwards b.107 dynes c.moves towards the axis of rotation d.jumps out from that platform e.take out his coat and throws away

Description : A man is standing ner the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platorm will decrease if he a.extends his arms outwards b.107 ... towards the axis of rotation d.jumps out from that platform e.take out his coat and throws away

Last Answer : a. extends his arms outwards

A train travels between two stations 15 km apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform retardation, the maximum speed attained by the train during the journey will by a.125 km/hr b.107 dynes c.80 km/hr d.100 km/hr e.60 km/hr

Description : A train travels between two stations 15 km apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform retardation, the maximum speed attained by the train during the journey will by a.125 km/hr b.107 dynes c.80 km/hr d.100 km/hr e.60 km/hr

Last Answer : d. 100 km/hr

A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Description : A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Last Answer : c. 2.5 m/s

Which of the following is not a lever of the first order? a.Pair of Smith's tongs b.Wheel barrow c.Ordinary balance d.Pair of scissors e.107 dynes

Description : Which of the following is not a lever of the first order? a.Pair of Smith's tongs b.Wheel barrow c.Ordinary balance d.Pair of scissors e.107 dynes

Last Answer : b. Wheel barrow

A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Description : A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Last Answer : e. 0.67

For a perfect frame having 13 members the number of joints must be a.8 b.6 c.7 d.107 dynes e.9

Description : For a perfect frame having 13 members the number of joints must be a.8 b.6 c.7 d.107 dynes e.9

Last Answer : a. 8

A sphere of radius r is cut from larger sphere of radius R. The distance between their centre is a. The centroid of the remaining valoume lies on the line of centres and the sistanc from the centre of the larger sphere is a.ar2 / (R2 - r2) b.107 dynes c.aR/(R2-r2) d.aR/(R - r) e.ar3 / (R3 - r3)

Description : A sphere of radius r is cut from larger sphere of radius R. The distance between their centre is a. The centroid of the remaining valoume lies on the line of centres and the sistanc from the centre of the larger sphere is a.ar2 / (R2 - r2) b.107 dynes c.aR/(R2-r2) d.aR/(R - r) e.ar3 / (R3 - r3)

Last Answer : e. ar3 / (R3 - r3)

The dimensions of modulus of elasticity are a.MLT-2 b.107 dynes c.MLT-1 d.ML-2T-1 e.ML-1T-2

Description : The dimensions of modulus of elasticity are a.MLT-2 b.107 dynes c.MLT-1 d.ML-2T-1 e.ML-1T-2

Last Answer : e. ML-1T-2

A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : c. tangential acceleration