A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8
by

1 Answer

Answer :

e. 8
by

Related questions

A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Description : A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Last Answer : a. 3

A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Description : A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Last Answer : a. 10

When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Description : When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Last Answer : e. 76?

An automobile is travelling at 25 m/s. It takes 0.3 second to apply the brakes after which the deceleration is 6 m/s2. How far, in meters, does the automobile travel before it stops? a.45 b.107 dynes c.40 d.50 e.60

Description : An automobile is travelling at 25 m/s. It takes 0.3 second to apply the brakes after which the deceleration is 6 m/s2. How far, in meters, does the automobile travel before it stops? a.45 b.107 dynes c.40 d.50 e.60

Last Answer : e. 60

A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Description : A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Last Answer : c. 2.5 m/s

A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Description : A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Last Answer : e. 7.64

If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Description : If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Last Answer : e. 15 rev/min2

A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Description : A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Last Answer : c. 5 m/s

In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Description : In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Last Answer : e. 25.5 m/s

A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Description : A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Last Answer : e. 4?/3 m/s

A imaginary planet has half the mass and half the radius of the earth. The acceleration of gravity at its surface would be a.9.8 m/s2 b.107 dynes c.4.9 m/s2 d.19.6 m/s2 e.2.45 m/s2

Description : A imaginary planet has half the mass and half the radius of the earth. The acceleration of gravity at its surface would be a.9.8 m/s2 b.107 dynes c.4.9 m/s2 d.19.6 m/s2 e.2.45 m/s2

Last Answer : d. 19.6 m/s2

Secondary stresses may be set up in frame due to any of the following reasons EXCEPT a.members not being straight b.self-weight of the members c.eccentricity of connections d.rigidity of the members e.107 dynes

Description : Secondary stresses may be set up in frame due to any of the following reasons EXCEPT a.members not being straight b.self-weight of the members c.eccentricity of connections d.rigidity of the members e.107 dynes

Last Answer : d. rigidity of the members

A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating forward while going around a curve of radius equal to the maximum height attained by the ball c.107 dynes d.accelerating forwardA block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Last Answer : a. moving at constant velocity

Instantaneous centre for a rolling wheel on a straight track will be at a.107 dynes b.A c.B d.C e.D

Description : Instantaneous centre for a rolling wheel on a straight track will be at a.107 dynes b.A c.B d.C e.D

Last Answer : e. D

Maximum acceleration in above problem is a.107 dynes b.2?2/3 m/s2 c.?2/s m/s2 d.3?2 m/s2 e.4?2/9 m/s2

Description : Maximum acceleration in above problem is a.107 dynes b.2?2/3 m/s2 c.?2/s m/s2 d.3?2 m/s2 e.4?2/9 m/s2

Last Answer : e. 4?2/9 m/s2

A satellite orbits the earth 200 km above the surface. What speed, in m/s, is necessary for a circular orbit? The radius of the earth is 6400 km and g = 9.2 m/s2 a.7200 b.6600 c.7800 d.6000 e.107 dynes

Description : A satellite orbits the earth 200 km above the surface. What speed, in m/s, is necessary for a circular orbit? The radius of the earth is 6400 km and g = 9.2 m/s2 a.7200 b.6600 c.7800 d.6000 e.107 dynes

Last Answer : c. 7800

A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235

Description : A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235

Last Answer : d. 10470

A 2 kg block is dropped from a height of 4 metre onto a spring of force constant k = 1960 N/m. The spring will be compressed through a.1 cm b.4.5 cm c.3 cm d.8 cm e.107 dynes

Description : A 2 kg block is dropped from a height of 4 metre onto a spring of force constant k = 1960 N/m. The spring will be compressed through a.1 cm b.4.5 cm c.3 cm d.8 cm e.107 dynes

Last Answer : d. 8 cm

The common acceleration will be a.1.5 m/s2 b.1.0 m/s2 c.107 dynes d.6 m/s2 e.3 m/s2

Description : The common acceleration will be a.1.5 m/s2 b.1.0 m/s2 c.107 dynes d.6 m/s2 e.3 m/s2

Last Answer : b. 1.0 m/s2

The displacement of a particle under going rectilinear motion along the x-axis is given by x = 2t3 + 21t2 + 60t + 6 metres. a.27 m/s2 b.18 m/s2 c.36 m/s2 d.9 m/s2 e.107 dynes

Description : The displacement of a particle under going rectilinear motion along the x-axis is given by x = 2t3 + 21t2 + 60t + 6 metres. a.27 m/s2 b.18 m/s2 c.36 m/s2 d.9 m/s2 e.107 dynes

Last Answer : d. 9 m/s2

A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Description : A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Last Answer : e. 0.67

A particle of mass M moves towards right with a velocity 2 V along the x-axis and another of mass 2 M with a velocity V towards left (- x axis). After the collision (they stick together on colliging) they will a.come to rest b.107 dynes c.move towards right d.may move in any direction e.move towards left

Description : A particle of mass M moves towards right with a velocity 2 V along the x-axis and another of mass 2 M with a velocity V towards left (- x axis). After the collision (they stick together on colliging) ... a.come to rest b.107 dynes c.move towards right d.may move in any direction e.move towards left

Last Answer : c. move towards right

For a perfect frame having 13 members the number of joints must be a.8 b.6 c.7 d.107 dynes e.9

Description : For a perfect frame having 13 members the number of joints must be a.8 b.6 c.7 d.107 dynes e.9

Last Answer : a. 8

If there are 3 pulleys in the first system, then the velocity ratio of this system will be a.8 b.2 c.4 d.107 dynes e.6

Description : If there are 3 pulleys in the first system, then the velocity ratio of this system will be a.8 b.2 c.4 d.107 dynes e.6

Last Answer : a. 8

The polar moment of inertia of a hollow circular section whose external diameter is 8 cm and internal diameter of 6 cm will be a.137.5 cm4 b.107 dynes c.275 cm4 d.550 cm4 e.1100 cm4

Description : The polar moment of inertia of a hollow circular section whose external diameter is 8 cm and internal diameter of 6 cm will be a.137.5 cm4 b.107 dynes c.275 cm4 d.550 cm4 e.1100 cm4

Last Answer : c. 275 cm4

A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Description : A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Last Answer : c. 502 rad/min2

The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Description : The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Last Answer : c. the acceleration is 1.2 m/s2

In the above problem, acceleration of crooshead at 30? phase equals a.107 dynes b.640 m/s2 c.780 m/s2 d.520 m/s2 e.870 m/s2

Description : In the above problem, acceleration of crooshead at 30? phase equals a.107 dynes b.640 m/s2 c.780 m/s2 d.520 m/s2 e.870 m/s2

Last Answer : e. 870 m/s2

Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Description : Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Last Answer : c. When we are ascending in a lift with acceleration of 4.9 m/s2

What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Description : What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Last Answer : c. 78.94 mts/sec2

A stone dropped from a baloon that was ascending at the rate of 30 ft/sec, reaches ground after 10 secs. The height of the baloon where stone was dropped was a.3420 ft b.107 dynes c.4520 ft d.2310 ft e.1310 ft

Description : A stone dropped from a baloon that was ascending at the rate of 30 ft/sec, reaches ground after 10 secs. The height of the baloon where stone was dropped was a.3420 ft b.107 dynes c.4520 ft d.2310 ft e.1310 ft

Last Answer : e. 1310 ft

A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Description : A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Last Answer : c. 75,000 ft

The excape velocity for the moon is nearly a.5 km/s b.11.2 km/s c.107 dynes d.2.4 km/s e.1.1 km/s

Description : The excape velocity for the moon is nearly a.5 km/s b.11.2 km/s c.107 dynes d.2.4 km/s e.1.1 km/s

Last Answer : d. 2.4 km/s

What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Description : What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Last Answer : a. 0.35

If for power transmission a gear train consisting of 8 gears is used, then a.the motion of driver and follower will be in the same direction b.the motion of driver and follower will be in the opposite directions c.either of (A) or (B) above d.None of the above e.107 dynes

Description : If for power transmission a gear train consisting of 8 gears is used, then a.the motion of driver and follower will be in the same direction b.the motion of driver and follower will be in the opposite directions c.either of (A) or (B) above d.None of the above e.107 dynes

Last Answer : b. the motion of driver and follower will be in the opposite directions

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Last Answer : a. 90

A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Last Answer : c. 120

The sag in a tape 100 ft long held between two supports 99.8 ft aprat at the same level is a.3.32 ft b.0.98 ft c.2.73 ft d.1.87 ft e.107 dynes

Description : The sag in a tape 100 ft long held between two supports 99.8 ft aprat at the same level is a.3.32 ft b.0.98 ft c.2.73 ft d.1.87 ft e.107 dynes

Last Answer : c. 2.73 ft

Three forces A, B and C of magnitudes 8 N, 12 N and 20 N acting on a particle are in equilibrim. It can be concluded that a.107 dynes b.B and C act in opposite directions c.one of the forces in non-coplaner d.A and B act at 90? e.one of the forces is non-concurrent

Description : Three forces A, B and C of magnitudes 8 N, 12 N and 20 N acting on a particle are in equilibrim. It can be concluded that a.107 dynes b.B and C act in opposite directions c.one of the forces in non-coplaner d.A and B act at 90? e.one of the forces is non-concurrent

Last Answer : b. B and C act in opposite directions

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

The mass, in kg, of the earth if its radius is 6400 km, will be a.6 x 1024 b.6 x 1025 c.107 dynes d.6 x 1023 e.6 x 1022

Description : The mass, in kg, of the earth if its radius is 6400 km, will be a.6 x 1024 b.6 x 1025 c.107 dynes d.6 x 1023 e.6 x 1022

Last Answer : a. 6 x 1024

What will be the duration of day and night if the earth shrinks to half the present radius? a.6 hours b.12 hours c.107 dynes d.3 hours e.24 hours

Description : What will be the duration of day and night if the earth shrinks to half the present radius? a.6 hours b.12 hours c.107 dynes d.3 hours e.24 hours

Last Answer : a. 6 hours

In case forces of 1 N, 2 N, 3 N, 4 N, 5 N and 6 N act in order along the sides of a regular hexagon, the resultant will be a.21 N b.107 dynes c.2 N d.6 N e.

Description : In case forces of 1 N, 2 N, 3 N, 4 N, 5 N and 6 N act in order along the sides of a regular hexagon, the resultant will be a.21 N b.107 dynes c.2 N d.6 N e.

Last Answer : d. 6 N

The y-coordinate of the centroid of the area bounded by the x-axis, the line x = 3 and the parabola y = x2 will be a.2.7 b.2.55 c.107 dynes d.2.6 e.2.65

Description : The y-coordinate of the centroid of the area bounded by the x-axis, the line x = 3 and the parabola y = x2 will be a.2.7 b.2.55 c.107 dynes d.2.6 e.2.65

Last Answer : a. 2.7

The tension T1 will be a.5 N b.20 N c.60 N d.10 N e.107 dynes

Description : The tension T1 will be a.5 N b.20 N c.60 N d.10 N e.107 dynes

Last Answer : d. 10 N

A body is pushed with a force of 10 N for 0.5 second. The impulse given to the body is a.107 dynes b.50 Ns c.3.5 Ns d.5 Ns e.2.5 Ns

Description : A body is pushed with a force of 10 N for 0.5 second. The impulse given to the body is a.107 dynes b.50 Ns c.3.5 Ns d.5 Ns e.2.5 Ns

Last Answer : d. 5 Ns

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Description : A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Last Answer : c. 15 kg

A car travelling at a speed of 60 km/hour is braked and comes to rest 6 seconds after the brakes are applied. The minimum coefficient of driction between the wheels and the road would be a.0.107 b.0.3 c.0.283 d.0.417 e.0.5

Description : A car travelling at a speed of 60 km/hour is braked and comes to rest 6 seconds after the brakes are applied. The minimum coefficient of driction between the wheels and the road would be a.0.107 b.0.3 c.0.283 d.0.417 e.0.5

Last Answer : c. 0.283