The angular acceleration of a flywheel decreases uniformly from 8 rad/sec2 to 2 rad sec2 in 6 sec at which time its angular velocity is 42 rad/sec. The initial angular velocity was a.12 rad/sec b.24 rad/sec c.30 rad/sec d.3 rad/sec e.6 rad/sec

The angular acceleration of a flywheel decreases uniformly from 8 rad/sec2 to 2 rad sec2 in 6 sec at which time its angular velocity is 42 rad/sec. The initial angular velocity was a.12 rad/sec b.24 rad/sec c.30 rad/sec d.3 rad/sec e.6 rad/sec
by

1 Answer

Answer :

a. 12 rad/sec
by

Related questions

The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Description : The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Last Answer : b. 26.74

What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Description : What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Last Answer : c. 78.94 mts/sec2

A couple applied to a flywheel of mass 5 kg and of radius of gyration 20 cm produces an angular acceleration of 4 radians/sec2. The torque applied in dyne cm is a.8 x 104 b.8 x 106 c.8 x 107 d.8 x 108 e.8 x 1010

Description : A couple applied to a flywheel of mass 5 kg and of radius of gyration 20 cm produces an angular acceleration of 4 radians/sec2. The torque applied in dyne cm is a.8 x 104 b.8 x 106 c.8 x 107 d.8 x 108 e.8 x 1010

Last Answer : b. 8 x 106

A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Description : A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Last Answer : b. 20 rpm

A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Description : A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Last Answer : e. 7.64

A particle starts from rest and moves in a straight line whose equation of motion is given by S = 2t3 - t2 - 1. The acceleration of the particle after one sec will be a.6 m/sec2 b.4 m/sec2 c.12 m/sec2 d.10 m/sec2 e.8 m/sec2

Description : A particle starts from rest and moves in a straight line whose equation of motion is given by S = 2t3 - t2 - 1. The acceleration of the particle after one sec will be a.6 m/sec2 b.4 m/sec2 c.12 m/sec2 d.10 m/sec2 e.8 m/sec2

Last Answer : d. 10 m/sec2

A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Description : A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Last Answer : d. 3.33 rad/sec

In which case power required would be more a.In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec b.In lowering a weight of 100 kg along an a inclined plane at an angle of 45? with c.In lifting up a weight of 100 kg at a constant speed of 3 m/sec d.In lowering the weight at a constant speed of 3 m/sec e.In lowering the weight at a velocity of 3 m/sec and acceleration of 1 m/sec2

Description : In which case power required would be more a.In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec b.In lowering a weight of 100 kg along an a inclined plane ... speed of 3 m/sec e.In lowering the weight at a velocity of 3 m/sec and acceleration of 1 m/sec2

Last Answer : a. In lifting up a weight of 100 kg at a velocity of 3 m/sec but accelerating upwards at 0.5 m/sec

A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : c. tangential acceleration

A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : a. angular velocity

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move down the plane to that when it move up the plane would be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Description : A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move ... be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Last Answer : b. 5 ? 7

If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Description : If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Last Answer : e. 15 rev/min2

A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Description : A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of ... be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Last Answer : a. More than one

A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Description : A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Last Answer : c. 502 rad/min2

A body whose true weight is 14 kg appears to weigh 15 kg when weighed with the help of a spring balance in a moving lift. The acceleration of the lift at the time was a.1 m/sec2 b.0.7 m/sec2 c.0.5 m/sec2 d.1.4 m/sec2 e.0.35 m/sec2

Description : A body whose true weight is 14 kg appears to weigh 15 kg when weighed with the help of a spring balance in a moving lift. The acceleration of the lift at the time was a.1 m/sec2 b.0.7 m/sec2 c.0.5 m/sec2 d.1.4 m/sec2 e.0.35 m/sec2

Last Answer : b. 0.7 m/sec2

The value of acceleration due to gravity is 980 cm/sec2. Its value in meter per (hour)2 will be a.1.27 x 108 b.127 c.1270 d.1.27 x 107 e.1270000

Description : The value of acceleration due to gravity is 980 cm/sec2. Its value in meter per (hour)2 will be a.1.27 x 108 b.127 c.1270 d.1.27 x 107 e.1270000

Last Answer : a. 1.27 x 108

A stone of wight 100 kg is thrown vertically upwards by a man of height y = 1.8 m with an initial velocity of 20 m/sec. The maximum height to which it will rise would be a.22.2 m b.26 m c.15.1 m d.20.2 m e.10 m

Description : A stone of wight 100 kg is thrown vertically upwards by a man of height y = 1.8 m with an initial velocity of 20 m/sec. The maximum height to which it will rise would be a.22.2 m b.26 m c.15.1 m d.20.2 m e.10 m

Last Answer : a. 22.2 m

A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is a.500 KJ b.50.96 KJ c.101.92 KJ d.None of the above e.Tapered bearing

Description : A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is a.500 KJ b.50.96 KJ c.101.92 KJ d.None of the above e.Tapered bearing

Last Answer : a. 500 KJ

The force which produces an acceleration of 1 m/sec2 in a mass of 1 kg is called a.100 ergs b.one Newton c.one watt d.One erg e.one joule

Description : The force which produces an acceleration of 1 m/sec2 in a mass of 1 kg is called a.100 ergs b.one Newton c.one watt d.One erg e.one joule

Last Answer : b. one Newton

A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is a.2.45 m/sec2 b.4.00 m/sec2 c.0.25 m/sec2 d.4.16 m/sec2 e.1.25 m/sec2

Description : A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is a.2.45 m/sec2 b.4.00 m/sec2 c.0.25 m/sec2 d.4.16 m/sec2 e.1.25 m/sec2

Last Answer : a. 2.45 m/sec2

The angular velocity of seconds hand of a watch is a.0.01745 sec-1 b.0.00001745 sec-1 c.0.0001745 sec-1 d.0.001745 sec-1 e.0.1047 sec-1

Description : The angular velocity of seconds hand of a watch is a.0.01745 sec-1 b.0.00001745 sec-1 c.0.0001745 sec-1 d.0.001745 sec-1 e.0.1047 sec-1

Last Answer : d. 0.001745 sec-1

The angular velocity of earth is a.0.00727 sec-1 b.0.000727 sec-1 c.0.0000727 sec-1 d.0.00000727 sec-1 e.None of the above

Description : The angular velocity of earth is a.0.00727 sec-1 b.0.000727 sec-1 c.0.0000727 sec-1 d.0.00000727 sec-1 e.None of the above

Last Answer : c. 0.0000727 sec-1

The angular velocity of hour hand of a watch is a.0.0001745 sec-1 b.0.0001455 sec-1 c.0.0000145 sec-1 d.0.1045 sec-1 e.0.001745 sec-1

Description : The angular velocity of hour hand of a watch is a.0.0001745 sec-1 b.0.0001455 sec-1 c.0.0000145 sec-1 d.0.1045 sec-1 e.0.001745 sec-1

Last Answer : b. 0.0001455 sec-1

During planetary motion which of the following remains constant? a.Augular speed b.Linear velocity c.Angular acceleration d.Total angular momentum e.All of the above

Description : During planetary motion which of the following remains constant? a.Augular speed b.Linear velocity c.Angular acceleration d.Total angular momentum e.All of the above

Last Answer : b. Linear velocity

A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235

Description : A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235

Last Answer : d. 10470

A stone is dropped into a deep shaft without any initial velocity. The sound of the stone hitting the bottom is heard after 4 seconds. If the velocity of sound is 330 m/sec the depth of the shaft will be a.33.1 m b.660 m c.165 m d.66.2 m e.330 m

Description : A stone is dropped into a deep shaft without any initial velocity. The sound of the stone hitting the bottom is heard after 4 seconds. If the velocity of sound is 330 m/sec the depth of the shaft will be a.33.1 m b.660 m c.165 m d.66.2 m e.330 m

Last Answer : d. 66.2 m

A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Description : A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Last Answer : a. 3

A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Description : A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Last Answer : a. 3.9 m/sec

A cage weighing 200 kg is lowered down a mine shaft with uniform acceleration. In the first 5 sec the cage reaches a depth of 20 m. The tension in the cord lowering the cage would be a.836 kg b.167.2 kg c.100 kg d.41.8 kg e.200 kg

Description : A cage weighing 200 kg is lowered down a mine shaft with uniform acceleration. In the first 5 sec the cage reaches a depth of 20 m. The tension in the cord lowering the cage would be a.836 kg b.167.2 kg c.100 kg d.41.8 kg e.200 kg

Last Answer : b. 167.2 kg

The time required to stop a car moving with a velocity 20 m/sec within a distance of 40 m is equal to a.8 sec b.2 sec c.4 sec d.10 sec e.6 sec

Description : The time required to stop a car moving with a velocity 20 m/sec within a distance of 40 m is equal to a.8 sec b.2 sec c.4 sec d.10 sec e.6 sec

Last Answer : c. 4 sec

A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Description : A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Last Answer : b. 11.286 J

A cannon of barrel length 2 m fires a shell of weight 6 kg with a muzzle velocity of 50 m/sec. The force exerted by the gases on the shell would be approximately a.76 t b.19 t c.152 t d.8.5 t e.38 t

Description : A cannon of barrel length 2 m fires a shell of weight 6 kg with a muzzle velocity of 50 m/sec. The force exerted by the gases on the shell would be approximately a.76 t b.19 t c.152 t d.8.5 t e.38 t

Last Answer : e. 38 t

A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Description : A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Last Answer : e. Either of (A) and (C)

A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered by the piston to sliding with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Description : A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Last Answer : a. 2 km

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Description : A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Last Answer : e. 4?/3 m/s

A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Description : A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Last Answer : a. 10

A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was a.1 rad/s2 b.31.4 rad/s2 c.4 rad/s2 d.62.8 rad/s2 e.10.4 rad/s2

Description : A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was a.1 rad/s2 b.31.4 rad/s2 c.4 rad/s2 d.62.8 rad/s2 e.10.4 rad/s2

Last Answer : b. 31.4 rad/s2

The periodic time of a body moving in Simple Harmonic Motion is a.Directly proportional to its angular velocity b.Directly proportional to the weight of the body c.Inversely proportional to the square of angular velocity d.Directly proportional to the momentum of swinging body e.Inversely proportional to the angular velocity

Description : The periodic time of a body moving in Simple Harmonic Motion is a.Directly proportional to its angular velocity b.Directly proportional to the weight of the body c.Inversely proportional to ... d.Directly proportional to the momentum of swinging body e.Inversely proportional to the angular velocity

Last Answer : e. Inversely proportional to the angular velocity

If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Description : If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Last Answer : d. (T1 - T2) w

The torque acting on a system is zero. Which of the following will be conserved? a.Angular velocity b.Linear momentum c.107 dynes d.Angular momentum e.Moment of inertia

Description : The torque acting on a system is zero. Which of the following will be conserved? a.Angular velocity b.Linear momentum c.107 dynes d.Angular momentum e.Moment of inertia

Last Answer : d. Angular momentum

The moment of inertia of a body does not depend upon a.The angular velocity of the body b.Mass of the body c.The distribution of mass in the body d.The axis of rotation of the body e.None of the above

Description : The moment of inertia of a body does not depend upon a.The angular velocity of the body b.Mass of the body c.The distribution of mass in the body d.The axis of rotation of the body e.None of the above

Last Answer : a. The angular velocity of the body

If a gymnast sitting on a rotating stool, with his arms outstretched suddenly lowers his arm a.the angular velocity will remain constant b.the angular momentum will increase c.the angular velocity will decrease d.his moment of inertia will decrease e.107 dynes

Description : If a gymnast sitting on a rotating stool, with his arms outstretched suddenly lowers his arm a.the angular velocity will remain constant b.the angular momentum will increase c.the angular velocity will decrease d.his moment of inertia will decrease e.107 dynes

Last Answer : d. his moment of inertia will decrease

A ball weighing 250 gm is thrown vertically upwards with a velocity of 980 cm/sec. The time that the ball will take to return back to earth would be a.1 sec b.4 sec c.2 sec d.5 sec e.3 sec

Description : A ball weighing 250 gm is thrown vertically upwards with a velocity of 980 cm/sec. The time that the ball will take to return back to earth would be a.1 sec b.4 sec c.2 sec d.5 sec e.3 sec

Last Answer : c. 2 sec

A stone is thrown up from the foot of tower 50 m high with a velocity of 25 m/sec and at the same time another stone is dropped from the top of tower, the two stones will cross each other after a.3 sec b.5 sec c.4 sec d.4.5 sec e.2 sec

Description : A stone is thrown up from the foot of tower 50 m high with a velocity of 25 m/sec and at the same time another stone is dropped from the top of tower, the two stones will cross each other after a.3 sec b.5 sec c.4 sec d.4.5 sec e.2 sec

Last Answer : e. 2 sec

The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Description : The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Last Answer : a. 1.885 m/sec

A ball of mass 1 kg moving with a velocity of 2 m/sec collides directly with a stationary ball of mass 2 kg. If the first ball comes to rest after the impact the velocity of second ball after impact will be a.1.5 m/sec b.0.5 m/sec c.Zero d.2 m/sec e.1.0 m/sec

Description : A ball of mass 1 kg moving with a velocity of 2 m/sec collides directly with a stationary ball of mass 2 kg. If the first ball comes to rest after the impact the velocity of second ball after impact will be a.1.5 m/sec b.0.5 m/sec c.Zero d.2 m/sec e.1.0 m/sec

Last Answer : e. 1.0 m/sec

A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in 10 sec. The distance between the locomotive and the wagons at this instant assuming that the forces acting on the train are unaltered would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Description : A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in ... would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Last Answer : d. 0.5 m