A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was a.1 rad/s2 b.31.4 rad/s2 c.4 rad/s2 d.62.8 rad/s2 e.10.4 rad/s2

A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was a.1 rad/s2 b.31.4 rad/s2 c.4 rad/s2 d.62.8 rad/s2 e.10.4 rad/s2
by

1 Answer

Answer :

b. 31.4 rad/s2
by

Related questions

A grinding wheel rotates at 3000 rpm. When power supply is cut-off the wheel stops in 10 seconds. The number of revolutions made by the wheel before coming to rest would be a.1500 b.3000 c.1000 d.250 e.500

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut-off the wheel stops in 10 seconds. The number of revolutions made by the wheel before coming to rest would be a.1500 b.3000 c.1000 d.250 e.500

Last Answer : d. 250

A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Last Answer : c. 250

A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Description : A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Last Answer : c. 502 rad/min2

An automobile is travelling at 25 m/s. It takes 0.3 second to apply the brakes after which the deceleration is 6 m/s2. How far, in meters, does the automobile travel before it stops? a.45 b.107 dynes c.40 d.50 e.60

Description : An automobile is travelling at 25 m/s. It takes 0.3 second to apply the brakes after which the deceleration is 6 m/s2. How far, in meters, does the automobile travel before it stops? a.45 b.107 dynes c.40 d.50 e.60

Last Answer : e. 60

A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Description : A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Last Answer : a. 3

A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Description : A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Last Answer : e. 7.64

The resultant of a force acting on a body will be zero, if the body a.Rotates with uniform acceleration b.Moves along a curved path c.Rotates d.Does not rotate e.Rotates with uniform deceleration

Description : The resultant of a force acting on a body will be zero, if the body a.Rotates with uniform acceleration b.Moves along a curved path c.Rotates d.Does not rotate e.Rotates with uniform deceleration

Last Answer : d. Does not rotate

In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Description : In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Last Answer : e. 25.5 m/s

A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Description : A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Last Answer : d. 3.33 rad/sec

A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : c. tangential acceleration

A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : a. angular velocity

A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235

Description : A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235

Last Answer : d. 10470

If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Description : If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Last Answer : e. 15 rev/min2

A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Description : A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Last Answer : b. 20 rpm

A block slides down a frictionless incline making an angle ? with an elevator floor. The acceleration relative to the incline will be maximum when a.the elevator ascends at constant speed v b.the elevator descends at constant speed v c.107 dynes d.elevator descends with deceleration a e.the elevator descends with acceleration a

Description : A block slides down a frictionless incline making an angle ? with an elevator floor. The acceleration relative to the incline will be maximum when a.the elevator ascends at constant speed v b. ... speed v c.107 dynes d.elevator descends with deceleration a e.the elevator descends with acceleration a

Last Answer : d. elevator descends with deceleration a

A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Description : A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Last Answer : a. 10

The angular acceleration of a flywheel decreases uniformly from 8 rad/sec2 to 2 rad sec2 in 6 sec at which time its angular velocity is 42 rad/sec. The initial angular velocity was a.12 rad/sec b.24 rad/sec c.30 rad/sec d.3 rad/sec e.6 rad/sec

Description : The angular acceleration of a flywheel decreases uniformly from 8 rad/sec2 to 2 rad sec2 in 6 sec at which time its angular velocity is 42 rad/sec. The initial angular velocity was a.12 rad/sec b.24 rad/sec c.30 rad/sec d.3 rad/sec e.6 rad/sec

Last Answer : a. 12 rad/sec

A imaginary planet has half the mass and half the radius of the earth. The acceleration of gravity at its surface would be a.9.8 m/s2 b.107 dynes c.4.9 m/s2 d.19.6 m/s2 e.2.45 m/s2

Description : A imaginary planet has half the mass and half the radius of the earth. The acceleration of gravity at its surface would be a.9.8 m/s2 b.107 dynes c.4.9 m/s2 d.19.6 m/s2 e.2.45 m/s2

Last Answer : d. 19.6 m/s2

A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly a.2.5 N b.3 N c.2 N d.4.5 N e.4.9 N

Description : A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly a.2.5 N b.3 N c.2 N d.4.5 N e.4.9 N

Last Answer : d. 4.5 N

The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Description : The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Last Answer : b. 26.74

An electric motor drives a windless which hauls up a crate A of weight W = 500 kg up an inclined plane through a height of 10 m in 2 minutes. The torque acting on the windless is 25 kgm and the drum of the windless makes 30 rpm. The efficiency of the inclined plane would be a.0.41 b.0.61 c.0.265 d.0.5305 e.0.66

Description : An electric motor drives a windless which hauls up a crate A of weight W = 500 kg up an inclined plane through a height of 10 m in 2 minutes. The torque acting on the windless is 25 kgm and the drum of the ... The efficiency of the inclined plane would be a.0.41 b.0.61 c.0.265 d.0.5305 e.0.66

Last Answer : d. 0.5305

A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about a.6000 m b.1500 m c.3000 m d.2000 m e.1000 m

Description : A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about a.6000 m b.1500 m c.3000 m d.2000 m e.1000 m

Last Answer : a. 6000 m

The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Description : The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Last Answer : c. the acceleration is 1.2 m/s2

Maximum acceleration in above problem is a.107 dynes b.2?2/3 m/s2 c.?2/s m/s2 d.3?2 m/s2 e.4?2/9 m/s2

Description : Maximum acceleration in above problem is a.107 dynes b.2?2/3 m/s2 c.?2/s m/s2 d.3?2 m/s2 e.4?2/9 m/s2

Last Answer : e. 4?2/9 m/s2

In the above problem, acceleration of crooshead at 30? phase equals a.107 dynes b.640 m/s2 c.780 m/s2 d.520 m/s2 e.870 m/s2

Description : In the above problem, acceleration of crooshead at 30? phase equals a.107 dynes b.640 m/s2 c.780 m/s2 d.520 m/s2 e.870 m/s2

Last Answer : e. 870 m/s2

The common acceleration will be a.1.5 m/s2 b.1.0 m/s2 c.107 dynes d.6 m/s2 e.3 m/s2

Description : The common acceleration will be a.1.5 m/s2 b.1.0 m/s2 c.107 dynes d.6 m/s2 e.3 m/s2

Last Answer : b. 1.0 m/s2

Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Description : Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Last Answer : c. When we are ascending in a lift with acceleration of 4.9 m/s2

The displacement of a particle under going rectilinear motion along the x-axis is given by x = 2t3 + 21t2 + 60t + 6 metres. a.27 m/s2 b.18 m/s2 c.36 m/s2 d.9 m/s2 e.107 dynes

Description : The displacement of a particle under going rectilinear motion along the x-axis is given by x = 2t3 + 21t2 + 60t + 6 metres. a.27 m/s2 b.18 m/s2 c.36 m/s2 d.9 m/s2 e.107 dynes

Last Answer : d. 9 m/s2

A satellite orbits the earth 200 km above the surface. What speed, in m/s, is necessary for a circular orbit? The radius of the earth is 6400 km and g = 9.2 m/s2 a.7200 b.6600 c.7800 d.6000 e.107 dynes

Description : A satellite orbits the earth 200 km above the surface. What speed, in m/s, is necessary for a circular orbit? The radius of the earth is 6400 km and g = 9.2 m/s2 a.7200 b.6600 c.7800 d.6000 e.107 dynes

Last Answer : c. 7800

A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

Description : A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

Last Answer : e. 8

What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Description : What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Last Answer : c. 78.94 mts/sec2

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Last Answer : a. 90

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Last Answer : c. 120

The limiting force of fiction is a.The friction force acting on a body when it is in motion b.The value of friction force which stops the movement of the body c.The value of friction force which cannot exceed under a situation d.The friction force acting when the body is just about to move e.Double of the normal friction

Description : The limiting force of fiction is a.The friction force acting on a body when it is in motion b.The value of friction force which stops the movement of the body c.The value of friction force which ... d.The friction force acting when the body is just about to move e.Double of the normal friction

Last Answer : d. The friction force acting when the body is just about to move

A body is vibrating with simple harmonic motion of aplitude 5 cm frequency 10 vibrations per second. The maximum value of velocity in cm/s will be a.3.14 cm/s b.314 cm/s c.3140 cm/s d.31.4 cm/s e.31400 cm/s

Description : A body is vibrating with simple harmonic motion of aplitude 5 cm frequency 10 vibrations per second. The maximum value of velocity in cm/s will be a.3.14 cm/s b.314 cm/s c.3140 cm/s d.31.4 cm/s e.31400 cm/s

Last Answer : b. 314 cm/s

A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves towards the axis of rotation c.jumps out from the platform d.accepts a heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Description : A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves ... heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Last Answer : d. accepts a heavy bag from one of his friends standing near by and holds it in his hand

A man is standing ner the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platorm will decrease if he a.extends his arms outwards b.107 dynes c.moves towards the axis of rotation d.jumps out from that platform e.take out his coat and throws away

Description : A man is standing ner the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platorm will decrease if he a.extends his arms outwards b.107 ... towards the axis of rotation d.jumps out from that platform e.take out his coat and throws away

Last Answer : a. extends his arms outwards

If a gymnast sitting on a rotating stool, with his arms outstretched suddenly lowers his arm a.the angular velocity will remain constant b.the angular momentum will increase c.the angular velocity will decrease d.his moment of inertia will decrease e.107 dynes

Description : If a gymnast sitting on a rotating stool, with his arms outstretched suddenly lowers his arm a.the angular velocity will remain constant b.the angular momentum will increase c.the angular velocity will decrease d.his moment of inertia will decrease e.107 dynes

Last Answer : d. his moment of inertia will decrease

A cage weighing 200 kg is lowered down a mine shaft with uniform acceleration. In the first 5 sec the cage reaches a depth of 20 m. The tension in the cord lowering the cage would be a.836 kg b.167.2 kg c.100 kg d.41.8 kg e.200 kg

Description : A cage weighing 200 kg is lowered down a mine shaft with uniform acceleration. In the first 5 sec the cage reaches a depth of 20 m. The tension in the cord lowering the cage would be a.836 kg b.167.2 kg c.100 kg d.41.8 kg e.200 kg

Last Answer : b. 167.2 kg

A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is a.500 KJ b.50.96 KJ c.101.92 KJ d.None of the above e.Tapered bearing

Description : A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is a.500 KJ b.50.96 KJ c.101.92 KJ d.None of the above e.Tapered bearing

Last Answer : a. 500 KJ

Work done by a body of mass 100 kg moving along a circular path of radius 2 m with a uniform velocity of 10 m/sec is a.5000 J b.2500 J c.509.68 J d.None of the above e.Tapered bearing

Description : Work done by a body of mass 100 kg moving along a circular path of radius 2 m with a uniform velocity of 10 m/sec is a.5000 J b.2500 J c.509.68 J d.None of the above e.Tapered bearing

Last Answer : d. None of the above

A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m

Description : A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m

Last Answer : c. 63.7 m

Efficiency of a screw jack in maximum when its 31 helix angle, ? is a.45 + ?/2 b.107 dynes c.? d.45 - ?/2 e.45?

Description : Efficiency of a screw jack in maximum when its 31 helix angle, ? is a.45 + ?/2 b.107 dynes c.? d.45 - ?/2 e.45?

Last Answer : d. 45 - ?/2

The motion of a bicycle wheel is a.Curvilinear b.Translatory c.Linear d.Rotary as well as translatory e.Rotary

Description : The motion of a bicycle wheel is a.Curvilinear b.Translatory c.Linear d.Rotary as well as translatory e.Rotary

Last Answer : d. Rotary as well as translatory

Which of the following is not a lever of the first order? a.Pair of Smith's tongs b.Wheel barrow c.Ordinary balance d.Pair of scissors e.107 dynes

Description : Which of the following is not a lever of the first order? a.Pair of Smith's tongs b.Wheel barrow c.Ordinary balance d.Pair of scissors e.107 dynes

Last Answer : b. Wheel barrow

The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Description : The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Last Answer : a. 628

Instantaneous centre for a rolling wheel on a straight track will be at a.107 dynes b.A c.B d.C e.D

Description : Instantaneous centre for a rolling wheel on a straight track will be at a.107 dynes b.A c.B d.C e.D

Last Answer : e. D

When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of thrust c.Thrust eliminators are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Description : When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of ... are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Last Answer : d. Outside rails are realised

When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Description : When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Last Answer : c. equal in magnitude