Description : The moment of inertia of a hollow circular section whose external diameter is 8 cm and interial diameter is 6 cm about the axis passing through its centre is a.66.8 cm4 b.137.5 cm4 c.550 cm4 d.33.4 cm4 e.275 cm4
Last Answer : b. 137.5 cm4
Description : Which of the following could be the unit of rotational inertia of a body in CGS system? a.cm4 b.gm-cm2 c.107 dynes d.kg-cm2 e.gm-cm4
Last Answer : b. gm-cm2
Description : ML2T-2 could be the dimension of a.107 dynes b.moment of force c.viscosity d.mass moment of inertia e.momentum
Last Answer : b. moment of force
Description : The torque acting on a system is zero. Which of the following will be conserved? a.Angular velocity b.Linear momentum c.107 dynes d.Angular momentum e.Moment of inertia
Last Answer : d. Angular momentum
Description : If a gymnast sitting on a rotating stool, with his arms outstretched suddenly lowers his arm a.the angular velocity will remain constant b.the angular momentum will increase c.the angular velocity will decrease d.his moment of inertia will decrease e.107 dynes
Last Answer : d. his moment of inertia will decrease
Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch
Last Answer : b. 50.6 kg-inch
Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes
Last Answer : a. 90
Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90
Last Answer : c. 120
Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes
Last Answer : c. tangential acceleration
Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes
Last Answer : a. angular velocity
Description : A satellite launch station should be a.107 dynes b.near the equatorial region c.all the locations are equally good d.one the polar axis e.near the polar region
Last Answer : b. near the equatorial region
Description : A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2
Last Answer : c. 502 rad/min2
Description : What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2
Last Answer : c. 78.94 mts/sec2
Description : A 2 kg block is dropped from a height of 4 metre onto a spring of force constant k = 1960 N/m. The spring will be compressed through a.1 cm b.4.5 cm c.3 cm d.8 cm e.107 dynes
Last Answer : d. 8 cm
Description : The curve of a catenary by nature is a.hyperbolic b.ellipse c.107 dynes d.circular e.parabolic
Last Answer : e. parabolic
Description : A satellite orbits the earth 200 km above the surface. What speed, in m/s, is necessary for a circular orbit? The radius of the earth is 6400 km and g = 9.2 m/s2 a.7200 b.6600 c.7800 d.6000 e.107 dynes
Last Answer : c. 7800
Description : When two concurrent and coplaner forces P and Q act at an angle of 180?, their resultant will be a a.moment equal to PQ b.couple c.(P-Q) d.107 dynes e.zero
Last Answer : c. (P-Q)
Description : When all the forces acting on a body lie in one plane and their lines of action meet at one point, the forces a.constitute a moment b.constitute a couple c.are known as coplaner-concurrent forces. d.are known as non-coplaner forces e.107 dynes
Last Answer : c. are known as coplaner-concurrent forces.
Description : If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign
Last Answer : b. there is at least one couple acting on the beam
Description : A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes
Last Answer : b. two places
Description : In case of cantilever, irrespective of the type of loading the maximum bendry moment and maximum shear force occur at a.107 dynes b.Free end c.2/3 of the length, from the free end d.Centre of the beam e.Fixed end
Last Answer : e. Fixed end
Description : A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.107 dynes b.i + j + k c.2i + 3j d.zero e.i - j - k
Last Answer : b. i + j + k
Description : The centroid of a triangle is at the inter-section of a.perpendicular bisectors b.107 dynes c.base and perpendicular from opposite vertex d.perpendiculars down from the corners e.medians
Last Answer : e. medians
Description : A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes
Last Answer : a. at the highest position
Description : A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8
Last Answer : e. 8
Description : For a perfect frame having 13 members the number of joints must be a.8 b.6 c.7 d.107 dynes e.9
Last Answer : a. 8
Description : A imaginary planet has half the mass and half the radius of the earth. The acceleration of gravity at its surface would be a.9.8 m/s2 b.107 dynes c.4.9 m/s2 d.19.6 m/s2 e.2.45 m/s2
Last Answer : d. 19.6 m/s2
Description : If there are 3 pulleys in the first system, then the velocity ratio of this system will be a.8 b.2 c.4 d.107 dynes e.6
Description : Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area ... The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area
Last Answer : e. The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area
Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts
Last Answer : e. 60.1 mts
Description : In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s
Last Answer : e. 25.5 m/s
Description : A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7
Last Answer : a. 3
Description : The common acceleration will be a.1.5 m/s2 b.1.0 m/s2 c.107 dynes d.6 m/s2 e.3 m/s2
Last Answer : b. 1.0 m/s2
Description : In case forces of 1 N, 2 N, 3 N, 4 N, 5 N and 6 N act in order along the sides of a regular hexagon, the resultant will be a.21 N b.107 dynes c.2 N d.6 N e.
Last Answer : d. 6 N
Description : What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes
Last Answer : a. 0.35
Description : If for power transmission a gear train consisting of 8 gears is used, then a.the motion of driver and follower will be in the same direction b.the motion of driver and follower will be in the opposite directions c.either of (A) or (B) above d.None of the above e.107 dynes
Last Answer : b. the motion of driver and follower will be in the opposite directions
Description : The sag in a tape 100 ft long held between two supports 99.8 ft aprat at the same level is a.3.32 ft b.0.98 ft c.2.73 ft d.1.87 ft e.107 dynes
Last Answer : c. 2.73 ft
Description : A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes
Last Answer : a. 10
Description : Three forces A, B and C of magnitudes 8 N, 12 N and 20 N acting on a particle are in equilibrim. It can be concluded that a.107 dynes b.B and C act in opposite directions c.one of the forces in non-coplaner d.A and B act at 90? e.one of the forces is non-concurrent
Last Answer : b. B and C act in opposite directions
Description : The ratio of moment of inertia of a circular body about x axis to that about y axis is a.? b.? c.1?4 d.1 e.
Last Answer : e. 1
Description : A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s
Last Answer : e. 4?/3 m/s
Description : The mass, in kg, of the earth if its radius is 6400 km, will be a.6 x 1024 b.6 x 1025 c.107 dynes d.6 x 1023 e.6 x 1022
Last Answer : a. 6 x 1024
Description : What will be the duration of day and night if the earth shrinks to half the present radius? a.6 hours b.12 hours c.107 dynes d.3 hours e.24 hours
Last Answer : a. 6 hours
Description : An automobile is travelling at 25 m/s. It takes 0.3 second to apply the brakes after which the deceleration is 6 m/s2. How far, in meters, does the automobile travel before it stops? a.45 b.107 dynes c.40 d.50 e.60
Last Answer : e. 60
Description : The displacement of a particle under going rectilinear motion along the x-axis is given by x = 2t3 + 21t2 + 60t + 6 metres. a.27 m/s2 b.18 m/s2 c.36 m/s2 d.9 m/s2 e.107 dynes
Last Answer : d. 9 m/s2
Description : A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64
Last Answer : e. 7.64
Description : The y-coordinate of the centroid of the area bounded by the x-axis, the line x = 3 and the parabola y = x2 will be a.2.7 b.2.55 c.107 dynes d.2.6 e.2.65
Last Answer : a. 2.7
Description : The moment of inertia of a semi-circle of radius r with respect to a centroidal axis parallel to the diameter is a.0.33 r2 b.0.11 r2 c.0.055 r2 d.0.05 r2 e.0.22 r2
Last Answer : b. 0.11 r2
Description : Moment of Inertia of triangular section about an axis passing through its base is given by a.bh3/12 b.bh3/32 c.bh3/36 d.None of the above e.Tapered bearing
Last Answer : a. bh3/12
Description : A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000
Last Answer : c. 250