Tolerance value of Gold of colour coded resistors is _______.

Tolerance value of Gold of colour coded resistors is _______. A. 10% B. 5% C. 2% D. 20%
by

1 Answer

Answer :

Tolerance value of Gold of colour coded resistors is 5%. 

by

Related questions

A resistor with the color coded value of 1000 ohms and ± 10% tolerance can have an actual resistance...

Description : A resistor with the color coded value of 1000 ohms and ± 10% tolerance can have an actual resistance between ________. A. 990 ohm and 1010 ohm B. 900 ohm and 1100 ohm C. 1000 ohm and 1100 ohm D. 900 ohm and 1000 ohm. 

Last Answer : A resistor with the color coded value of 1000 ohms and ± 10% tolerance can have an actual resistance between 900 ohm and 1100 ohm.

What is the value of a resistor color coded red-violet-silver-gold?

Description : What is the value of a resistor color coded red-violet-silver-gold?

Last Answer : red = 2violet = 7silver = 0.01gold = 5%The value is 27 * 0.01 ohms 5% or 0.27 ohms 5%

The colour band on the extreme left in general purpose fixed resistors represents:

Description : The colour band on the extreme left in general purpose fixed resistors represents: A) Tolerance B) First significant digit C) Wattage Rating D) Voltage Rating

Last Answer : The colour band on the extreme left in general purpose fixed resistors represents: First significant digit

In the resistance colour code, the fourth band signifies – (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Description : In the resistance colour code, the fourth band signifies – (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Last Answer : (1) tolerance level Explanation: The first and second band represent the numerical value of the resistor, and the color of the third band specify the power-often multiplier. Reading the resistor from left to right, the fourth band represents the tolerance.

In the resistance colour code, the fourth band signifies (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Description : In the resistance colour code, the fourth band signifies (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Last Answer : tolerance level

A resistor is handed to you for identification with the following color code: the first band is blue, followed by gray, green, gold, and brown. What is the resistor’s value?

Description : A resistor is handed to you for identification with the following color code: the first band is blue, followed by gray, green, gold, and brown. What is the resistor’s value?

Last Answer : 6,800,000 ohms (6.8 mega ohms), with 5% tolerance, and a 1% reliability level.

The gold color code in a resistor indicates a tolerance of

Description : The gold color code in a resistor indicates a tolerance of

Last Answer : The gold color code in a resistor indicates a tolerance of 5%

When three resistors with unequal values are connected in parallel, _______

Description : When three resistors with unequal values are connected in parallel, _______ A) The current across the resistors is the same  B) The voltage drop across the resistors is the same C) The voltage drops across the resistors is proportional to the resistance of each resistor D) None of these

Last Answer : When three resistors with unequal values are connected in parallel, The voltage drop across the resistors is the same

A voltage of 30 V is applied across a colour coded carbon resistor with first, second and third rings of blue, black and yellow colurs. What is the cu

Description : A voltage of 30 V is applied across a colour coded carbon resistor with first, second and third rings of blue, black and yellow colurs. What is the cu

Last Answer : A voltage of 30 V is applied across a colour coded carbon resistor with first, second and ... What is the current flowing through the resistor ?

What is colour code of resistors , Please explain ?

Description : What is colour code of resistors , Please explain ?

Last Answer : Colours to denote value. In four band colour coding, the first band indicates the first digit, the second band : the second digit and the third band : the number of zeroes.

A two-phase generator is connected to two 9012 load resistors. Each coil generates 120 V ac. The value of ...

Description : A two-phase generator is connected to two 90Ω load resistors. Each coil generates 120 V ac. The value of current flowing through the common neutral line will be: A. 1.33 A B. 1.88 A C. 2.66 A D. 1.77 A

Last Answer : A two-phase generator is connected to two 90Ω load resistors. Each coil generates 120 V ac. The value of current flowing through the common neutral line will be: 1.77 A

Two 1 kilo ohm, 1/2 W resistors are connected in series. Their combined resistance value and wattage will be

Last Answer : Two 1 kilo-ohm 1/2 W resistors are connected in series. Their combined resistance value and wattage will be 2 kΩ, 1 W.

How to find the potential difference across a battery in a series parallel circuit with resistors that have no value given?

Description : How to find the potential difference across a battery in a series parallel circuit with resistors that have no value given?

Last Answer : The potential difference is obtthe difference of all voltage across a terminal. From the circuit above I think the resistors are in series and parallel to each other. The two resistors in line CB are ... place the multimeter in series with the circuit and you will get the resistance. But ise you

A fuse will 'blow' if _____________. A. an electric motor is stopped suddenly by opening a switch B. the flow of current to the protection device is reversed C. the electrical current exceeds the rated value of the fuse D. unequal resistors are connected in parallel

Description : A fuse will 'blow' if _____________. A. an electric motor is stopped suddenly by opening a switch B. the flow of current to the protection device is reversed C. the electrical current exceeds the rated value of the fuse D. unequal resistors are connected in parallel

Last Answer : Answer: C

When troubleshooting a console circuit card which is suspected of being faulty, the first step would be to _____. A. pull the card and measure the value of all resistors B. check for the correct value and polarity of all power connections to the card C. de-energize and pull the card to visually inspect for burned components D. check for continuity of circuit board traces and then the gain of each transistor

Description : When troubleshooting a console circuit card which is suspected of being faulty, the first step would be to _____. A. pull the card and measure the value of all resistors B. check for the ... for burned components D. check for continuity of circuit board traces and then the gain of each transistor

Last Answer : Answer: C

Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Description : Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Last Answer : 25 ohms

N resistors of each of resistance R when connected in series offer an equivalent resistance of 50 ohm and when reconnected in parallel the effective resistance is 2 ohm the value of R is

Description : N resistors of each of resistance R when connected in series offer an equivalent resistance of 50 ohm and when reconnected in parallel the effective resistance is 2 ohm the value of R is

Last Answer : 25 ohms

what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Description : what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Last Answer : equivalent resistance

A supply of 24 V DC is applied across a circuit which consist of three resistors connected in parallel R1= 1.2KΩ, R2= 560 Ω, R3= 2.1Ω and a fourth resistor of 7.8 Ω connected in series with the parallel group. Determine the current, voltage and power across each resistor

Last Answer : Req= (1/1200 +1/560 + 1/2.1)^-1        = 2.1 ohms RT= 2.1 + 7.8      = 9.9 ohms IT = V/R = 24/9.9                = 2.4 A Veq= R I =  2.1 2 ... 7.8         = 12.096 w                 = 44.928 w _________________________________________ By: Ellis-Junior Kamatjipose [email protected]

State any two types of resistors. Give one application of each.

Description : State any two types of resistors. Give one application of each.

Last Answer : Types of resistors with their applications: i) Carbon composition resistor: Potential divider, welding control circuits, power supplies, H. V. and high impulse circuits as switching spark ... vi)Cermet resistors: used in printers, automotive, computers, cell phones & battery chargers.

State any two features of carbon composition resistors.

Description : State any two features of carbon composition resistors.

Last Answer : Features of Carbon composition resistance: i) Low cost ii) Wide resistance range ( ohm to mega ohm) iii) Wide range of working voltage iv) Simple in construction 

List any four types of resistors. Give one application of each.

Description : List any four types of resistors. Give one application of each.

Last Answer : Ans: Types of resistors with their applications: i) Carbon composition resistor: Potential divider, welding control circuits, power supplies, H. V. and high impulse circuits as switching spark ... vi) Cermet resistors: used in printers, automotive, computers, cell phones & battery chargers. 

When two 100 kΩ resistors are connected in parallel, net resistance is

Description : When two 100 kΩ resistors are connected in parallel, net resistance is

Last Answer : When two 100 kΩ resistors are connected in parallel, net resistance is 50 kΩ

Three identical resistors connected in star consume 5000 W. If the resistors are connected in

Description : Three identical resistors connected in star consume 5000 W. If the resistors are connected in delta across the same supply, the power consumed will be

Last Answer : Three identical resistors connected in star consume 5000 W. If the resistors are connected in delta across the same supply, the power consumed will be 15000 W

Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage

Description : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Last Answer : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

What is the percentage error when 3 resistors with ratings 100 Ω at 5%, 150 Ω at 6% and 250 Ω at 8%

Description : What is the percentage error when 3 resistors with ratings 100 Ω at 5%, 150 Ω at 6% and 250 Ω at 8% respectively, are connected in series? A) 6.33% B) 6.80% C) 19% D) None of these

Last Answer : What is the percentage error when 3 resistors with ratings 100 Ω at 5%, 150 Ω at 6% and 250 Ω at 8% respectively, are connected in series? A) 6.33% B) 6.80% C) 19% D) None of these

What is the total resistance if 5 resistors of 20 Ω each are connected in series?

Description : What is the total resistance if 5 resistors of 20 Ω each are connected in series? A) 100 Ω B) 4 Ω C) 20 Ω D) None of these

Last Answer : What is the total resistance if 5 resistors of 20 Ω each are connected in series? A) 100 Ω B) 4 Ω C) 20 Ω D) None of these

Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is

Description : Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is 5 A. What will be the current if the above 4 resistors are connected in parallel? A) 5 A B) 50 A C) 500 A D) None of these

Last Answer : Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is 5 A. What will be the current if the above 4 resistors are connected in parallel? A) 5 A B) 50 A C) 500 A D) None of these

Which of the following is true with a series circuit having resistors of different values?

Description : Which of the following is true with a series circuit having resistors of different values? A) The total resistance of the circuit is the sum of the individual resistances B) The current across each ... ) The voltage drop across each resistor depends on the value of the resistor D) All the above

Last Answer : Which of the following is true with a series circuit having resistors of different values? A) The total resistance of the circuit is the sum of the individual resistances B) The current across ... voltage drop across each resistor depends on the value of the resistor D) All the above

Variable resistors are_____.

Description : Variable resistors are_____. A. Wire wound resistors B. Thin film resistors C. Thick film resistors D. All of the above.

Last Answer : Variable resistors are Wire wound resistors.

Which of the following series combinations of resistors dissipates the most power when connected across a...

Description : Which of the following series combinations of resistors dissipates the most power when connected across a 120 V source? A. One, 220Ω resistor B. Two, 220Ω resistors C. Three, 220Ω resistors D. Four, 220Ω resistors

Last Answer : Which of the following series combinations of resistors dissipates the most power when connected across a 120 V source?  One, 220Ω resistor

A string of five resistors connected in series is connected across a 6 V battery. Zero voltage is measured...

Description : A string of five resistors connected in series is connected across a 6 V battery. Zero voltage is measured across all the resistors except the third resistor. The voltage across the third resistor is: A. 0 V B. 1.2V C. 6V D. 0.6V

Last Answer : A string of five resistors connected in series is connected across a 6 V battery. Zero voltage is measured across all the resistors except the third resistor. The voltage across the third resistor is: 6V

What is the equivalent resistance of a network having 5 resistors of each 10ohm connected in parallel?

Description : What is the equivalent resistance of a network having 5 resistors of each 10ohm connected in parallel?  (A) 10 Ohms (B) 50 Ohms (C) 500 Ohms (D) 2 Ohms 

Last Answer : D) 2 ohms Solution: 1/Rt = (1/R)(n) 1/Rt = (1/10) (5) 1/Rt = 5/10    Rt = 2 ohms

Three resistors of 4 Ω, 6 Ω and 9 Ω are connected in parallel. Which resistor consumes the maximum power?

Description : Three resistors of 4 Ω, 6 Ω and 9 Ω are connected in parallel. Which resistor consumes the maximum power?  (A) 4 Ω (B) 6 Ω (C) 9 Ω (D) 17 Ω

Last Answer : (c) 9 ohm

Variable resistors are

Last Answer : Variable resistors are Wire wound resistors.

How many different combinations may be obtained with three resistors, each having the resistance R ?

Last Answer : 4 different combinations may be obtained with three resistors, each having the resistance R.

Four identical resistors are first connected in parallel and then in series. ...

Description : Four identical resistors are first connected in parallel and then in series. The resultant resistance of the first combination to the second will be

Last Answer : Four identical resistors are first connected in parallel and then in series. The resultant resistance of the first combination to the second will be  1 / 16 times.

Three equal resistors connected in series across a source of emf together...

Description : Three equal resistors connected in series across a source of emf together dissipate 10 watts of power. What would be the power dissipated in the same resistors when they are connected in parallel across the same source of emf? 

Last Answer : Three equal resistors connected in series across a source of emf together dissipate 10 watts of power. 90 watts would be the power dissipated in the same resistors when they are connected in parallel across the same source of emf.

Wire-wound resistors are unsuitable for use at high frequencies because they?

Description : Wire-wound resistors are unsuitable for use at high frequencies because they?

Last Answer : Wire-wound resistors are unsuitable for use at high frequencies because they exhibit unwanted inductive and capacitive effects.

Is tolerance a positive or negative value?

Description : Is tolerance a positive or negative value?

Last Answer : answer:Tolerance a somewhat confusing term i think. To me it mean learning/trying to cope with something that you consider as negative. A better way is to see things from another perspective, while trying to see the good in all things, whether they be negative or positive.

The third color band on a resistor is used to indicate the ______________. A. tolerance of the resistor B. number of zeros following the first two significant figures in the resistance value C. first significant figure of the resistance D. second significant figure of the resistance

Description : The third color band on a resistor is used to indicate the ______________. A. tolerance of the resistor B. number of zeros following the first two significant figures in the resistance value C. first significant figure of the resistance D. second significant figure of the resistance

Last Answer : Answer: B

What other colour the gold does the turn another color?

Description : What other colour the gold does the turn another color?

Last Answer : Need answer

On immersing gold pins in CuSO 4 solution for few minutes, you will observe (a) displacement reaction (b) the colour of solution fades away (c) the surface of gold pins acquire a black coating (d) No change

Description : On immersing gold pins in CuSO 4 solution for few minutes, you will observe (a) displacement reaction (b) the colour of solution fades away (c) the surface of gold pins acquire a black coating (d) No change

Last Answer : (d) No change

If we live in a simulation, which language was it coded in?

Description : If we live in a simulation, which language was it coded in?

Last Answer : Math

Is it possible for a coded message to contain characters that will pass every test for randomness?

Description : Is it possible for a coded message to contain characters that will pass every test for randomness?

Last Answer : You could add codified thermal noise over it when you send it and the receiver subtracts the noise when he gets the message. both sender and receiver need to have an identical copy of the noise.

Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Description : Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Last Answer : a.Words

……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Description : ……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Last Answer : d.Block