Description : In the illustration, 24 volts is applied to the circut where the resistance for R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R3? EL-0020 A. 12 watts B. 20 watts C. 24 watts D. 48 watts
Last Answer : Answer: B
Description : What is the power consumed by 'R3' in the circuit illustrated if the supply is 24 volts and resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 12 watts B. 20 watts C. 24 watts D. 48 watts
Description : In the illustration, 24 volts is applied to the circuit where the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R1? EL-0020 A. 2 watts B. 3 watts C. 6 watts D. 12 watts
Last Answer : Answer: D
Description : What is the power consumed by 'R1' in the circuit illustrated if the supply is 24 volts and the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 watts B. 3 watts C. 6 watts D. 12 watts
Description : What is the total power consumed by the illustrated circuit if the supply is 24 volts and the resistances of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 watts B. 12 watts C. 48 watts D. 288 watts
Last Answer : Answer: C
Description : In the illustration, 24 volts is applied to the circuit where the resistance for R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R2? EL-0020 A. 16 watts B. 20 watts C. 24 watts D. 28 watts
Last Answer : Answer: A
Description : What is the power consumed by 'R2' in the circuit illustrated, if the supply is 24 volts and the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 16 watts B. 20 watts C. 24 watts D. 28 watts
Description : A transformer steps down 220V to 40 volts. If the secondary turns are 40 then primary turns will be: a. 20 b. 40 c. 120 d. 220
Last Answer : d. 220V
Description : If the illustrated device has a step-up ratio of 10 to 1 what voltage be measured at the secondary shortly after the primary of the device is connected to 110 volts DC with a current of 12 amps? EL-0055 A. 0 volts B. 110 volts C. 1000 volts D. 1100 volts
Description : What power is consumed by a heating element using a current of 20 amperes at 120 volts? A. 20 watts B. 66.67 watts C. 720 watts D. 2400 watts
Description : What is the absolute time a pilot should stop drinking before flying? a. 6 hours but it depends upon the amount of alcohol that has been consumed b. 24 hours but it depends upon the amount of ... that has been consumed d. 8 hours but it depends upon the amount of alcohol that has been consumed
Last Answer : d. 8 hours but it depends upon the amount of alcohol that has been consumed
Description : An electric heating element supplied with 120 volts draws 15 amps. How much power will be consumed? A. 15 watts B. 45.57 watts C. 180 watts D. 1800 watts
Description : الرجوع إلى الدائرة أدناه. الطاقة التي يستهلكها العنصر E متساوية.
Last Answer : The power consumed the element E is equal to the : P = V x I = 6V x 1 A = 6 W
Description : What would be the power consumed in the combined parallel section of the circuit shown in the illustration if the source were 30 volts and the resistance for R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts
Description : What power would be consumed by the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts
Description : What power would be consumed in EACH of the branch resistors of the circuit shown in the illustration if the source is 30 volts, the resistance for R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts
Description : A metallic hallow sphere of 8cm diameter is charged with 4 × 10−8c. The potential on its surface will be: (a) 90 volts (b) 9 volts (c) 9000 volts (d) 900 volts
Last Answer : c) 9000 volts
Description : In the illustration, if the device in figure 'A' has a step-up ratio of 10 to 1, what voltage should be measured at the secondary shortly after the primary of the device is connected to 110 volts DC? EL-0059 A. 0 volts B. 110 volts C. 11 volts D. 1100 volts
Description : An electric bulb of 100 W is used for 8 h per day. Calculate the 'units' of energy consumed in one day by the bulb? -Physics 9th
Last Answer : Given : t=6 hrs P=0.06 kW Thus energy consumed per day is: E=Pt=0.06×6=0.36 kWh=0.36 units
Description : A tube light rated 50 watts (electric powers) is used for 10 hours per day for 30 days in a month. How much electric energy is being consumed by it per month? Similary per year, how much energy will be consumed?
Last Answer : Ans. 50 x 10 x 30 = 15000watts = 15000/1000= 15 units per month. Per units consumed: 15X12= 180units per year.
Description : Find the electric flux density of a material whose charge density is given by 12 units in a volume region of 0.5 units. a) 12 b) 24 c) 6 d) 48
Last Answer : c) 6
Description : What would be the total power consumed in the circuit shown in the illustration if the source is 30 volts the resistance for R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 10 watts B. 40 watts C. 45 watts D. 60 watts
Description : The SI units of permitivity are: (a) N.m/C2(b) C2/N.m2 (c) N.m2/C2(d) N.m/C
Last Answer : (b) C2/N.m2
Description : Find the electric force when the charge of 2C is subjected to an electric field of 6 units. a) 6 b) 3 c) 12 d) 24
Last Answer : c) 12
Description : The electric flux density of a surface with permittivity of 2 is given by 12 units. What the flux density of the surface in air? a) 24 b) 6 c) 1/6 d) 0
Last Answer : b) 6
Description : Calculate the energy in an electric field with flux density 6 units and field intensity of 4 units. a) 12 b) 24 c) 36 d) 48
Last Answer : a) 12
Description : An immersion heater of 400 watts kept on for 5 hours will consume electrical power of a. 2KWh b. 20KWh c. 6KWh d. 12KWh
Last Answer : a. 2KWh
Description : Two bulbs marked 200 watt-250 volts and 100 watt-250 volts are joined in series to 250 volts supply. Power consumed in circuit is
Last Answer : Two bulbs marked 200 watt-250 volts and 100 watt-250 volts are joined in series to 250 volts supply. Power consumed in circuit is 67 watt.
Description : In the illustrated circuit the voltage is 12 VDC and the resistance is 3 ohms. If the battery is rated for 120 amp-hours, how long before the voltage will drop to 1.75 volts per cell? EL-0018 A. 12 hours B. 1.75 days C. 30 hours D. 2.5 days
Description : In the illustrated circuit, what is the voltage of the battery if the resistance of R1 is 150 ohms, the total resistance is 250 ohms and the current though R2 is 25 milliamps? EL-0036 A. 12 volts B. 24 volts C. 1.5 volts D. 6.25 volts
Description : Three 12 volt, lead-acid, batteries connected in series will develop __________. A. 12 volts B. 24 volts C. 36 volts D. 48 volts
Description : A battery is connected to a circuit containing three resistors in parallel. The values of the three resistors are 2 ohms, 3 ohms, and 6 ohms. What is the voltage of the battery if the total circuit current is 12 amps? A. 2 volts B. 6 volts C. 12 volts D. 24 volt
Description : In the illustration, A, B, C, and D are 12 volts in the circuit. What is the voltage of the lead connected to C and D with respect to the lead connected to A and B? EL-0039 A. (-) 48 volts B. (+) 48 volts C. (-) 24 volts D. (+) 24 volts
Description : In the illustration, A, B, C and D are 12 volt batteries. a voltmeter across the output of the circuit will indicate _____________. EL-0039 A. 6 volts B. 12 volts C. 24 volts D. 48 volts
Description : If a 6 volt battery were connected in series with a 24 volt battery by putting their negative terminals together, what would be the result? A. 'Zero' volts B. 12 volts of the opposite polarity C. 18 volts, positive on the 24 volt battery D. 30 volts, negative on the 24 volt battery
Description : In the illustration circuit, A, B, C, and D are each 12 volts. What is the voltage of the lead connected to C and D with respect to the lead connected to A and B? EL-0039 A. (+) 48 volts B. (-) 24 volts C. (-) 48 volts D. (+) 24 volts
Description : In the illustration circuit, A, B, C, and D are each 12 volts. What is the voltage at the output lead connected to 'A' and 'B' with respect to the output lead connected to 'C' and 'D'? EL-0039 A. (+) 48 volts B. (-) 24 volts C. (-) 48 volts D. (+) 24 volts
Description : Diesel tractors are equipped with a more rugged starting motor ofa) 6 or 12 volts b) 12 or 24 volts c) 6 or 24 volts d) 12 or 36 volts
Last Answer : c) 6 or 24 volts
Description : How many hours is 1100 am to 645pm?
Last Answer : Need answer
Description : Please ripley me due to emergency
Last Answer : To calculate the flux density in the ring, you need to use the following formula: B = (μ * I * N) / (2 * π * r) where: B is the flux density in the ring (in teslas) μ is the relative permeability ... 2 * π * 0.127 m) = 0.53 T So the flux density in the ring would be approximately 0.53 teslas.
Description : The left hand rule correlates to (a) current, induced e.m.f. and direction of force on a conductor (b) magnetic field, electric field and direction of force on a conductor (c) self induction, ... and direction of force on a conductor (d) current, magnetic field and direction of force on a conductor
Last Answer : (d) current, magnetic field and direction of force on a conductor
Description : What is an electric tachometer?*
Last Answer : A generator producing voltage proportional to speed.
Description : The unit of electric intensity is
Last Answer : Volt/ metre
Description : The reverse process of photo-electric effect is called: a) Annihilation of matter b) Compton effect c) Pair production d) X-rays
Last Answer : d) X-rays
Description : A device based on photo electric effect is called a) Photo sensitive b) Photo diode c) Photo synthesis d) Photo cell
Last Answer : d) Photo cell
Description : A sensor which changes light intensity into electric voltage. (a) LDR (b) thermistor (c) photodiode (d) photovoltaic
Last Answer : (a) LDR
Description : The windings of the electromagnetic are usually called: a. Magnetic coils b. Field coil c. Electric coil d. simple coil
Last Answer : c. Electric coil
Description : Which of the following converts electric energy into mechanical energy: a. Transformer b. DC generator c. Motor d. AC generator
Last Answer : d. AC generato
Description : In motor a permanent magnet provides: a. Electric field b. electric flux c. magnetic field d. gravitational field
Last Answer : d. gravitational field