Diesel tractors are equipped with a more rugged starting motor ofa) 6 or 12 volts b) 12 or 24 volts c) 6 or 24 volts d) 12 or 36 volts

Diesel tractors are equipped with a more rugged starting
motor ofa) 6 or 12 volts
b) 12 or 24 volts
c) 6 or 24 volts
d) 12 or 36 volts
by

1 Answer

Answer :

c) 6 or 24 volts
by

Related questions

The starting motor used on a powerine tractor may be of a) 6 or 12 volt type b) 12 or 24 volt type c) 16 or 24 volt type d) 6 or 24 volt type

Description : The starting motor used on a powerine tractor may be of a) 6 or 12 volt type b) 12 or 24 volt type c) 16 or 24 volt type d) 6 or 24 volt type

Last Answer : a) 6 or 12 volt type

for breeding in sheep,a ram can be used after attaining the age ofa 10 months b 18 months c 24 months d 4 months

Description : for breeding in sheep,a ram can be used after attaining the age ofa 10 months b 18 months c 24 months d 4 months

Last Answer : b 18 months

Three 12 volt, lead-acid, batteries connected in series will develop __________. A. 12 volts B. 24 volts C. 36 volts D. 48 volts

Description : Three 12 volt, lead-acid, batteries connected in series will develop __________. A. 12 volts B. 24 volts C. 36 volts D. 48 volts

Last Answer : Answer: C

In a RBD experiment having 9 treatments and 4 replications, the error degree of freedom will be A) 24 (B) 32 (C) 27 D) 36

Description : In a RBD experiment having 9 treatments and 4 replications, the error degree of freedom will be A) 24 (B) 32 (C) 27 D) 36

Last Answer : A) 24

Voltage can be stepped up from 6 to approximately a) 10,000 volts b) 15.00 0 volts c) 20,000 volts d) 25,000 volts

Description : Voltage can be stepped up from 6 to approximately a) 10,000 volts b) 15.00 0 volts c) 20,000 volts d) 25,000 volts

Last Answer : c) 20,000 volts

Agricultural tractors are generally having horse power (h.p.)— (A) 20-50 (B) 50-70 (C) 10-15 (D) 20-25

Description : Agricultural tractors are generally having horse power (h.p.)— (A) 20-50 (B) 50-70 (C) 10-15 (D) 20-25

Last Answer : (C) 10-15

Power operated Paddy transplanter is being manufactured in India by (a) M/s Escorts Ltd. (b) M/s Mitsubishi Ltd (c) M/s Eicher tractors Ltd (d) M/s Mahindra Ltd

Description : Power operated Paddy transplanter is being manufactured in India by (a) M/s Escorts Ltd. (b) M/s Mitsubishi Ltd (c) M/s Eicher tractors Ltd (d) M/s Mahindra Ltd

Last Answer : (b) M/s Mitsubishi Ltd

A battery is connected to a circuit containing three resistors in parallel. The values of the three resistors are 2 ohms, 3 ohms, and 6 ohms. What is the voltage of the battery if the total circuit current is 12 amps? A. 2 volts B. 6 volts C. 12 volts D. 24 volt

Description : A battery is connected to a circuit containing three resistors in parallel. The values of the three resistors are 2 ohms, 3 ohms, and 6 ohms. What is the voltage of the battery if the total circuit current is 12 amps? A. 2 volts B. 6 volts C. 12 volts D. 24 volt

Last Answer : Answer: C

In the illustration, A, B, C and D are 12 volt batteries. a voltmeter across the output of the circuit will indicate _____________. EL-0039 A. 6 volts B. 12 volts C. 24 volts D. 48 volts

Description : In the illustration, A, B, C and D are 12 volt batteries. a voltmeter across the output of the circuit will indicate _____________. EL-0039 A. 6 volts B. 12 volts C. 24 volts D. 48 volts

Last Answer : Answer: C

In the illustration, 24 volts is applied to the circuit where the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R1? EL-0020 A. 2 watts B. 3 watts C. 6 watts D. 12 watts

Description : In the illustration, 24 volts is applied to the circuit where the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R1? EL-0020 A. 2 watts B. 3 watts C. 6 watts D. 12 watts

Last Answer : Answer: D

In the illustrated circuit, what is the voltage of the battery if the resistance of R1 is 150 ohms, the total resistance is 250 ohms and the current though R2 is 25 milliamps? EL-0036 A. 12 volts B. 24 volts C. 1.5 volts D. 6.25 volts

Description : In the illustrated circuit, what is the voltage of the battery if the resistance of R1 is 150 ohms, the total resistance is 250 ohms and the current though R2 is 25 milliamps? EL-0036 A. 12 volts B. 24 volts C. 1.5 volts D. 6.25 volts

Last Answer : Answer: D

If a 6 volt battery were connected in series with a 24 volt battery by putting their negative terminals together, what would be the result? A. 'Zero' volts B. 12 volts of the opposite polarity C. 18 volts, positive on the 24 volt battery D. 30 volts, negative on the 24 volt battery

Description : If a 6 volt battery were connected in series with a 24 volt battery by putting their negative terminals together, what would be the result? A. 'Zero' volts B. 12 volts of the opposite polarity C. 18 volts, positive on the 24 volt battery D. 30 volts, negative on the 24 volt battery

Last Answer : Answer: C

What is the power consumed by 'R1' in the circuit illustrated if the supply is 24 volts and the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 watts B. 3 watts C. 6 watts D. 12 watts

Description : What is the power consumed by 'R1' in the circuit illustrated if the supply is 24 volts and the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 watts B. 3 watts C. 6 watts D. 12 watts

Last Answer : Answer: D

The power supplied to a motor is six kilowatts at 120 volts. What is the impedance of the motor? A. 0.05 Ohms B. 0.50 Ohms C. 2.40 Ohms D. 24.00 Ohms

Description : The power supplied to a motor is six kilowatts at 120 volts. What is the impedance of the motor? A. 0.05 Ohms B. 0.50 Ohms C. 2.40 Ohms D. 24.00 Ohms

Last Answer : Answer: C

tractors are almost used in the current generation. a. Petrol c) Electric b. CNG d) Diesel

Description : tractors are almost used in the current generation. a. Petrol c) Electric b. CNG d) Diesel

Last Answer : Diesel

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left Side .045 - .047, Bottom .045 - .041 Which of the f A. both the aft and foward bearings should be replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

Some large A.C. motors are equipped with with heaters. These could be ___________. I. resistance heaters bolted directly to the frame II. low voltage windings embedded in the motor windings A. I only B. II only C. either I or II D. neither I or II

Description : Some large A.C. motors are equipped with with heaters. These could be ___________. I. resistance heaters bolted directly to the frame II. low voltage windings embedded in the motor windings A. I only B. II only C. either I or II D. neither I or II

Last Answer : Answer: C

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left Side .045 - .047 , Bottom .045 - .041 Which of the fo A. The aft bearing should be realigned or replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.

Description : Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.

Last Answer : Forward: Reverse:

A repulsion motor is equipped with?

Last Answer : A repulsion motor is equipped with commutator.

The net gain of ATP in glycolysis is (A) 12 ATPs (B) 24 ATPs (C)1 ATP (D) 2 ATPs

Description : The net gain of ATP in glycolysis is (A) 12 ATPs (B) 24 ATPs (C)1 ATP (D) 2 ATPs

Last Answer : (D) 2 ATPs

The fertilized eggs of Catla take about _ to _ hrs for hatching at 30°C (a) 10 to 12 (b) 12 to 14 (c) 14 to 18 (d) 18 to 24

Description : The fertilized eggs of Catla take about _ to _ hrs for hatching at 30°C (a) 10 to 12 (b) 12 to 14 (c) 14 to 18 (d) 18 to 24

Last Answer : (d) 18 to 24

In the illustration, A, B, C, and D are 12 volts in the circuit. What is the voltage of the lead connected to C and D with respect to the lead connected to A and B? EL-0039 A. (-) 48 volts B. (+) 48 volts C. (-) 24 volts D. (+) 24 volts

Description : In the illustration, A, B, C, and D are 12 volts in the circuit. What is the voltage of the lead connected to C and D with respect to the lead connected to A and B? EL-0039 A. (-) 48 volts B. (+) 48 volts C. (-) 24 volts D. (+) 24 volts

Last Answer : Answer: D

In the illustration, 24 volts is applied to the circut where the resistance for R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R3? EL-0020 A. 12 watts B. 20 watts C. 24 watts D. 48 watts

Description : In the illustration, 24 volts is applied to the circut where the resistance for R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms. What is the power consumed in R3? EL-0020 A. 12 watts B. 20 watts C. 24 watts D. 48 watts

Last Answer : Answer: B

What is the power consumed by 'R3' in the circuit illustrated if the supply is 24 volts and resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 12 watts B. 20 watts C. 24 watts D. 48 watts

Description : What is the power consumed by 'R3' in the circuit illustrated if the supply is 24 volts and resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 12 watts B. 20 watts C. 24 watts D. 48 watts

Last Answer : Answer: B

What is the total power consumed by the illustrated circuit if the supply is 24 volts and the resistances of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 watts B. 12 watts C. 48 watts D. 288 watts

Description : What is the total power consumed by the illustrated circuit if the supply is 24 volts and the resistances of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 watts B. 12 watts C. 48 watts D. 288 watts

Last Answer : Answer: C

In the illustration circuit, A, B, C, and D are each 12 volts. What is the voltage of the lead connected to C and D with respect to the lead connected to A and B? EL-0039 A. (+) 48 volts B. (-) 24 volts C. (-) 48 volts D. (+) 24 volts

Description : In the illustration circuit, A, B, C, and D are each 12 volts. What is the voltage of the lead connected to C and D with respect to the lead connected to A and B? EL-0039 A. (+) 48 volts B. (-) 24 volts C. (-) 48 volts D. (+) 24 volts

Last Answer : Answer: D

In the illustration circuit, A, B, C, and D are each 12 volts. What is the voltage at the output lead connected to 'A' and 'B' with respect to the output lead connected to 'C' and 'D'? EL-0039 A. (+) 48 volts B. (-) 24 volts C. (-) 48 volts D. (+) 24 volts

Description : In the illustration circuit, A, B, C, and D are each 12 volts. What is the voltage at the output lead connected to 'A' and 'B' with respect to the output lead connected to 'C' and 'D'? EL-0039 A. (+) 48 volts B. (-) 24 volts C. (-) 48 volts D. (+) 24 volts

Last Answer : Answer: B

An electric iron is marked 20 volts 500W. The units consumed by it in using if for 24 hours will be a. 12 b. 24 c. 5 d. 1100

Description : An electric iron is marked 20 volts 500W. The units consumed by it in using if for 24 hours will be a. 12 b. 24 c. 5 d. 1100

Last Answer : a. 12

Do they make a PDA ment for rugged use?

Description : Do they make a PDA ment for rugged use?

Last Answer : A PDA is like a small handheld computer in which it would not be meant for rough use.

Are the Rugged Ridge products good for Jeeps?

Description : Are the Rugged Ridge products good for Jeeps?

Last Answer : The Rugged Ridge products are the most highly recommended products for jeeps. They are also the most commonly used. They come in various colors and are also in different materials.

Where can I buy a handheld computer that will handle rugged conditions?

Description : Where can I buy a handheld computer that will handle rugged conditions?

Last Answer : There are companies that offer handheld computers. One is trimble, here is a link to their website: www.trimble.com/Outdoor-Rugged-Computers/ and another is intermec, here is a link to their website also: www.intermec.com/.../computers/handheld_computers/index.aspx

Load cells used for the measurement of weight has (A) Compact & rugged construction with an accuracy of 0.1 to 1% (B) No moving parts and incurs negligible deflection under load (C) Provision of thermal compensation and is hermetically sealed (D) All 'a', 'b' & 'c'

Description : Load cells used for the measurement of weight has (A) Compact & rugged construction with an accuracy of 0.1 to 1% (B) No moving parts and incurs negligible deflection under load (C) Provision of thermal compensation and is hermetically sealed (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Which of the following complete sets do not recommend the siting of a harbor layout in that vicinity ? 1. Submarine canyon 2. Lee of an island 3. Closely located promontories 4. Indentation coves on the coastline 5. Hooked bays with not-so-rugged rocky bottom (a) 2, 3, 4 and 5 (b) 1, 4 and 5 only (c) 2, 3 and 4 only (d) 3, 4 and 5 only

Description : Which of the following complete sets do not recommend the siting of a harbor layout in that vicinity ? 1. Submarine canyon 2. Lee of an island 3. Closely located promontories 4. Indentation coves on the coastline 5. Hooked bays ... (b) 1, 4 and 5 only (c) 2, 3 and 4 only (d) 3, 4 and 5 only

Last Answer : (a) 2, 3, 4 and 5

A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction of the engines for the supply of air (c) Two-cycle engines are not rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Description : A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction ... rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Last Answer : (a) The ambient atmospheric pressure is less at higher altitudes

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

The time taken for a radioactive element to reduce to 50% of its original weight is __________ years, if its half life period is 12 years. (A) 24 (B) 18 (C) 6 (D) 36

Description : The time taken for a radioactive element to reduce to 50% of its original weight is __________ years, if its half life period is 12 years. (A) 24 (B) 18 (C) 6 (D) 36

Last Answer : (B) 18

Period within complaints should be prepared in case of VP, loss /damage of regd& ins article, other complaint related to inland post, miscarriage /destruction of postal order & SP is a) 12 month, 3 month, 6 month, 12 month, 1 month b) 24 month, 6 month, 9 month, 1 month, 2 month c) 36 month, 1 month, 6 month, 9 month, 2 month d) 6 month, 3 month3 month, 9 month, 1 month

Description : Period within complaints should be prepared in case of VP, loss /damage of regd& ins article, other complaint related to inland post, miscarriage /destruction of postal order & SP is a) 12 month, 3 month, 6 month, ... 1 month, 6 month, 9 month, 2 month d) 6 month, 3 month3 month, 9 month, 1 month

Last Answer : a) 12 month, 3 month, 6 month, 12 month, 1 month

Calculate the energy in an electric field with flux density 6 units and field intensity of 4 units. a) 12 b) 24 c) 36 d) 48

Description : Calculate the energy in an electric field with flux density 6 units and field intensity of 4 units. a) 12 b) 24 c) 36 d) 48

Last Answer : a) 12

After cleaning a slow sand filter, the filtered water is not used for (A) 6 hours to 12 hours (B) 12 hours to 18 hours (C) 18 hours to 24 hours (D) 24 hours to 36 hours

Description : After cleaning a slow sand filter, the filtered water is not used for  (A) 6 hours to 12 hours  (B) 12 hours to 18 hours  (C) 18 hours to 24 hours  (D) 24 hours to 36 hours 

Last Answer : (D) 24 hours to 36 hours 

At the time of marriage, a man was 6 years older to his wife. 12 years after their marriage, his age is 6/5 times the age of his wife. What was wife’s age at the time of marriage? a) 18 years b) 24 years c) 30 years d) 36 years e) None of these

Description : At the time of marriage, a man was 6 years older to his wife. 12 years after their marriage, his age is 6/5 times the age of his wife. What was wife’s age at the time of marriage? a) 18 years b) 24 years c) 30 years d) 36 years e) None of these

Last Answer : ratio of their ages, 12 years hence = 6 : 5  Difference in ages = 1 ratio = 6 years wife’s age (12 years hence) = 5 ratio = 5 × 6 years = 30 years wife’s age at the time of marriage = 30 – 12 = 18 years Answer: a)

12.28× 1.5 -36÷ 2.4 = ? a) 3.24 b) 7.325 c) 6.42 d) 4.32 e) None of these

Description : 12.28× 1.5 -36÷ 2.4 = ? a) 3.24 b) 7.325 c) 6.42 d) 4.32 e) None of these

Last Answer : 12.28 × 1.5 - 15 = ? 18.42 - 15 = ? ? = 3.42 Answer: e)

A three phase induction motor is drawing 16 Ampere at 440 Volts. If the operating power factor of the motor is 0.90 and the motor efficiency is 92%, then the mechanical shaft power output of the motor is a) 12.04 kW b) 10.09 kW c) 10.97 kW d) None of the above

Description : A three phase induction motor is drawing 16 Ampere at 440 Volts. If the operating power factor of the motor is 0.90 and the motor efficiency is 92%, then the mechanical shaft power output of the motor is a) 12.04 kW b) 10.09 kW c) 10.97 kW d) None of the above

Last Answer : b) 10.09 kW

Calorific value of high speed diesel is kcal/Kg (a) 9500 (b) 10550 (c) 11550 (d) 12500

Description : Calorific value of high speed diesel is kcal/Kg (a) 9500 (b) 10550 (c) 11550 (d) 12500

Last Answer : (b) 10550

Which of the following departments of India is associated with the National Mission on Bio-Diesel? a. Department of New and Renewable Energy b. Department of Rural Development c. Department of Land Resources d. Department of Energy e. None of the above

Description : Which of the following departments of India is associated with the National Mission on Bio-Diesel? a. Department of New and Renewable Energy b. Department of Rural Development c. Department of Land Resources d. Department of Energy e. None of the above

Last Answer : c. Department of Land Resources

The economical diesel fuels have got octane rating varying from a) 30 to 50 b) 30 to 60 c) 20 to 30 d) 25 to 30

Description : The economical diesel fuels have got octane rating varying from a) 30 to 50 b) 30 to 60 c) 20 to 30 d) 25 to 30

Last Answer : b) 30 to 60

The error degree of freedom for a RBD design with 10 treatments and 4 replications is (A) 20 (B) 27 (C) 40 (D) 36

Description : The error degree of freedom for a RBD design with 10 treatments and 4 replications is (A) 20 (B) 27 (C) 40 (D) 36

Last Answer : (B) 27

Batteries 'A' and 'B' shown in the illustration are 6 volts each and batteries 'C' and 'D' are 24 volts each. If 'A' were connected in series-opposing to 'C' and 'B' was similarly connected to'D', the result would be _______________. EL-0039 A. 18 volts, negative at the top terminal B. 18 volts, positive at the top terminal C. 30 volts, negative at the bottom terminal D. 30 volts, positive at the bottom terminal

Description : Batteries 'A' and 'B' shown in the illustration are 6 volts each and batteries 'C' and 'D' are 24 volts each. If 'A' were connected in series-opposing to 'C' and 'B' was similarly ... the top terminal C. 30 volts, negative at the bottom terminal D. 30 volts, positive at the bottom terminal

Last Answer : Answer: A

What is the voltage across 'R3' of the illustrated circuit if the supply is 24 volts and the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 volts B. 6 volts C. 8 volts D. 10 volts

Description : What is the voltage across 'R3' of the illustrated circuit if the supply is 24 volts and the resistance of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 volts B. 6 volts C. 8 volts D. 10 volts

Last Answer : Answer: D