Consider the following statements with regard to power diodes : 1. The breakdown voltage is directly...

Consider the following statements with regard to power diodes : 1. The breakdown voltage is directly proportional to the doping density of the drift region. 2. Losses in the diode are less due to conductivity modulation of the drift region in the on -state. 3. The vertically oriented structure supports large blocking voltages. Which of the above statements is/are correct ?
by

1 Answer

Answer :

Consider the following statements with regard to power diodes : 1. The breakdown voltage is directly proportional to the doping density of the drift region. 2. Losses in the diode are less due to conductivity modulation of the drift region in the on -state. 3. The vertically oriented structure supports large blocking voltages. Which of the above statements is/are correct ?


2 only

by

Related questions

Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Description : Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Last Answer : Answer: D

Consider the following statements with regard to a GTO : 1. The turn-off gain of the GTO is large....

Description : Consider the following statements with regard to a GTO : 1. The turn-off gain of the GTO is large. 2. Large negative gate current pulses are required to turn off the GTO. 3. GTO has large reverse blocking capability. Which of the ... is/are correct ? (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Last Answer : Consider the following statements with regard to a GTO : 1. The turn-off gain of the GTO is large. 2. Large negative gate current pulses are required to turn off the GTO. 3. GTO has large reverse blocking capability. Which of ... is/are correct ? (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Consider the following statements with regard to induction type wattmeter : 1. Can be used on both ac and...

Description : Consider the following statements with regard to induction type wattmeter :  1. Can be used on both ac and dc systems.  2. Power consumption is relatively low.  3. It is accurate only at stated frequency and temperature.  Which ... /are correct ?  (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Last Answer : Consider the following statements with regard to induction type wattmeter :  1. Can be used on both ac and dc systems.  2. Power consumption is relatively low.  3. It is accurate only at stated frequency and temperature. ... correct ?  (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Consider the following statements with regard to Moving Iron (MI) instruments : 1. These instruments ...

Description : Consider the following statements with regard to Moving Iron (MI) instruments :  1. These instruments possess high operating torque.  2. These instruments can be used in ac and dc circuits.  3. Power consumption in these instruments ... and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Last Answer : Consider the following statements with regard to Moving Iron (MI) instruments :  1. These instruments possess high operating torque.  2. These instruments can be used in ac and dc circuits.  3. Power consumption in these ... 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Consider the following statements with regard to Lissajous pattern on a CRO : 1. It is a stationary pattern on...

Description : Consider the following statements with regard to Lissajous pattern on a CRO :  1. It is a stationary pattern on the CRO.  2. It is used for precise measurement of frequency of a voltage signal.  3. The ratio between frequencies ... /are correct ?  (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Last Answer : Consider the following statements with regard to Lissajous pattern on a CRO :  1. It is a stationary pattern on the CRO.  2. It is used for precise measurement of frequency of a voltage signal.  3. The ratio between ... /are correct ?  (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

In regard to marginal leakage in amalgam: A. The wider the gap the better the chance of secondary caries B. Seal the margin with fissure sealant would prevent further breakdown C. Secondary caries may develop

Description : In regard to marginal leakage in amalgam: A. The wider the gap the better the chance of secondary caries B. Seal the margin with fissure sealant would prevent further breakdown C. Secondary caries may develop

Last Answer : A. The wider the gap the better the chance of secondary caries

Consider the following statements with regard to inverters 1. Line commutated inverters can function as

Description : Consider the following statements with regard to inverters 1. Line commutated inverters can function as isolated ac sources 2. Force commutated inverters can provide independent ac voltage with adjustable voltage and frequency 3. Thyrister ... correct statements are A)1,3 B)1,3,4 C) 2,4 D) 1,4

Last Answer : Consider the following statements with regard to inverters 1. Line commutated inverters can function as isolated ac sources 2. Force commutated inverters can provide independent ac voltage with adjustable voltage and frequency 3. ... correct statements are A)1,3 B)1,3,4 C) 2,4 D) 1,4

In the illustrated circuit, if the input to leads 'B' and 'Y' was 24 VDC the output between 'A' and 'X' will be _________. EL-0069 A. 24 VDC B. 22.8 VDC, 24 VDC minus the 1.2 VDC voltage drop across two diodes C. undeterminable without knowing the turns ratio of the transformer D. 0 VDC

Description : In the illustrated circuit, if the input to leads 'B' and 'Y' was 24 VDC the output between 'A' and 'X' will be _________. EL-0069 A. 24 VDC B. 22.8 VDC, 24 VDC minus the 1.2 VDC voltage drop across two diodes C. undeterminable without knowing the turns ratio of the transformer D. 0 VDC

Last Answer : Answer: D

In a 3-phase voltage source inverter used for speed control of induction motor, anti-parallel diodes are used

Description : In a 3-phase voltage source inverter used for speed control of induction motor, anti-parallel diodes are used across each switching device. The main purpose of diodes is to:

Last Answer : In a 3-phase voltage source inverter used for speed control of induction motor, anti-parallel diodes are used across each switching device. The main purpose of diodes is to: Allow the motor to return energy during regeneration

A voltage signal 10 Sinwt is applied to the circuit with ideal diodes, as shown in figure. The maximum and

Description : A voltage signal 10 Sinwt is applied to the circuit with ideal diodes, as shown in figure. The maximum and minimum values of the output waveform vout of the circuit are respectively

Last Answer : A voltage signal 10 Sinwt is applied to the circuit with ideal diodes, as shown in figure. The maximum and minimum values of the output waveform vout of the circuit are respectively +4V and-7V

Define breakdown voltage and dielectric strength of a capacitor.

Description : Define breakdown voltage and dielectric strength of a capacitor.

Last Answer : Breakdown Voltage: The voltage at which the dielectric material breaks down (Starts conducting or is no longer remains as an insulator) for a specified thickness, is called its breakdown ... without breaking down (without losing its dielectric property) is called its dielectric strength. 

Define : (i) Dielectric strength (ii) Breakdown voltage

Description : Define : (i) Dielectric strength (ii) Breakdown voltage

Last Answer : (i) Dielectric strength: The voltage which a dielectric material can withstand without breaking down (without losing its dielectric property) is called its dielectric strength. It is represented by kV/mm ... or is no longer an insulator) for a specified thickness, is its breakdown voltage. 

Which among the given statement is/are CORRECT. (a) Avalanche breakdown voltage increases with

Description : Which among the given statement is/are CORRECT. (a) Avalanche breakdown voltage increases with temperature (b) Zener breakdown voltage decreases with temperature A) Only (a) B) Only (b) C) Both (a) & (b) D) None of (a) & (b)

Last Answer : Which among the given statement is/are CORRECT. (a) Avalanche breakdown voltage increases with temperature (b) Zener breakdown voltage decreases with temperature A) Only (a) B) Only (b) C) Both (a) & (b) D) None of (a) & (b)

In the illustration, the component VR2 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal 1 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 2 at 9.1 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR2 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal ... 2 at 9.1 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: C

In the illustration, the component VR1 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal 9 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR1 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: A

In the illustration, the component VR1 on the A1A1 PCB is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply B. a variable resistor diode to control the output to terminal 9 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR1 on the A1A1 PCB is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply B. a variable resistor diode to control the output to terminal 9 that controls ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: C

Consider the following statements : 1. The voltage developed across the OFF switches of the half bridge...

Description : Consider the following statements : 1. The voltage developed across the OFF switches of the half bridge converter is the maximum dc link voltage. 2. In the full bridge converter, the voltage across ... bridge converter is half the maximum dc link voltage. Which of the above statements are correct ?

Last Answer : Consider the following statements : 1. The voltage developed across the OFF switches of the half bridge converter is the maximum dc link voltage. 2. In the full bridge converter, the voltage across the primary of ... dc link voltage. Which of the above statements are correct ? 1 and 2 only

Figure shows human urinary system with structures labelled A to D. Select option which correctly identifies them and gives their characteristic and/ or functions. (a) C - Medulla - inner zone of kidney and contains complete nephrons. (b) D - Cortex - outer part of kidney and do not contain any part of nephrons. (c) A - Adrenal gland - located at the anterior part of kidney. Secrete catecholamines which stimulate glycogen breakdown. (d) B - Pelvis - broad funnel shaped space inner to hilum, directly connected to loops of Henle

Description : Figure shows human urinary system with structures labelled A to D. Select option which correctly identifies them and gives their characteristic and/ or functions. (a) C - Medulla - inner zone of ... B - Pelvis - broad funnel shaped space inner to hilum, directly connected to loops of Henle

Last Answer : (c) A - Adrenal gland - located at the anterior part of kidney. Secrete catecholamines which stimulate glycogen breakdown.

Which one of the following is not correct with regard to the harmful effects of particulate matter of the size 2.5  micrometer or less? (a) It can cause respiratory problems. (b) It can directly enter into our circulatory system. (c) It can cause inflammation and damage to the lungs. (d) It can be inhaled into the lungs.

Description : Which one of the following is not correct with regard to the harmful effects of particulate matter of the size 2.5  micrometer or less? (a) It can cause respiratory problems. (b) It can directly enter ... ) It can cause inflammation and damage to the lungs. (d) It can be inhaled into the lungs.

Last Answer : (b) It can directly enter into our circulatory system.

Which rectifier requires four diodes

Last Answer : Bridge rectifier requires four diodes 

Consider the following statements: 1. In a direct-to-home (DTH) system, the viewer dish antenna picks up signals from the satellite directly. 2. Cable operators receive signal from the satellite on large community dish antennas and then transmit to the viewers’ sets. Which of the above statements is/are correct? (a) Only 1 (b) Only 2 (c) Both 1 and 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. In a direct-to-home (DTH) system, the viewer dish antenna picks up signals from the satellite directly. 2. Cable operators receive signal from the satellite on large community dish antennas and ... ? (a) Only 1 (b) Only 2 (c) Both 1 and 2 (d) Neither 1 nor 2

Last Answer : Ans:(c)

Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the centre of the pipe. 4. Hydraulic gradient varies as the square of the mean velocity of flow. Which of these statements are correct? (a) 1, 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Last Answer : (b) 1 & 3 only

Consider the following statements : 1. There is no flow across a streamline 2. Streamline spacing varies directly with velocity at the section 3. Streamlines do not cross 4. In steady flow, streamline pattern does not change with time Which of these statements in respect of stream flow pattern are correct? (a) 1, 2, 3 and 4 (b) 1 and 2 only (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Description : Consider the following statements : 1. There is no flow across a streamline 2. Streamline spacing varies directly with velocity at the section 3. Streamlines do not cross 4. In steady flow, streamline pattern does not change with ... 4 (b) 1 and 2 only (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Last Answer : (c) 1, 3 and 4 only

With regard to the powers of the Rajya Sabha, which one among the following statements is not correct? (1) A money bill cannot be introduced in the Rajya Sabha (2) The Rajya Sabha has no power either to reject or amend a money bill (3) The Rajya Sabha cannot discuss the Annual Financial Statement (4) The Rajya Sabha has no power to vote on the Demands for Grants

Description : With regard to the powers of the Rajya Sabha, which one among the following statements is not correct? (1) A money bill cannot be introduced in the Rajya Sabha (2) The Rajya Sabha has no power ... the Annual Financial Statement (4) The Rajya Sabha has no power to vote on the Demands for Grants

Last Answer : (3) The Rajya Sabha cannot discuss the Annual Financial Statement Explanation: A Money Bill cannot be introduc in Rajya Sabha. Rajya Sabha has no power either to reject or amend a Money Bill. It ... Sabha may discuss the Annual Financial Statement. It has no power to vote on the Demands for Grants.

With regard to the physics of power systems used operate robots, which statement or statements are most correct? a) hydraulics involves the compression of liquids b) hydraulics involves the compression of air c) pneumatics involve the compression of air d) chemical batteries produce AC power

Description : With regard to the physics of power systems used operate robots, which statement or statements are most correct? a) hydraulics involves the compression of liquids b) hydraulics involves the compression of air c) pneumatics involve the compression of air d) chemical batteries produce AC power

Last Answer : c) pneumatics involve the compression of air

With regard to the physics of power systems used operate robots, which statement or statements are most correct? A : hydraulics involves the compression of liquids B : hydraulics involves the compression of air C : pneumatic involves the compression of air D : chemical batteries produce AC power

Description : With regard to the physics of power systems used operate robots, which statement or statements are most correct? A : hydraulics involves the compression of liquids B : hydraulics involves the compression of air C : pneumatic involves the compression of air D : chemical batteries produce AC power

Last Answer : C : pneumatic involves the compression of air

With regard to the physics of power systems used operate robots, which statement or statements are most correct? A : hydraulics involves the compression of liquids B : hydraulics involves the compression of air C : pneumatic involves the compression of air D : chemical batteries produce AC power

Description : With regard to the physics of power systems used operate robots, which statement or statements are most correct? A : hydraulics involves the compression of liquids B : hydraulics involves the compression of air C : pneumatic involves the compression of air D : chemical batteries produce AC power

Last Answer : C : pneumatic involves the compression of air

With regard to the physics of power systems used operate robots, which statement or statements are most correct? A : hydraulics involves the compression of liquids B : hydraulics involves the compression of air C : pneumatic involves the compression of air D : chemical batteries produce AC power

Description : With regard to the physics of power systems used operate robots, which statement or statements are most correct? A : hydraulics involves the compression of liquids B : hydraulics involves the compression of air C : pneumatic involves the compression of air D : chemical batteries produce AC power

Last Answer : C : pneumatic involves the compression of air

With regard to the physics of power systems used operate robots, which statement or statements are most correct? A : hydraulics involves the compression of liquids B : hydraulics involves the compression of air C : pneumatic involves the compression of air D : chemical batteries produce AC power

Description : With regard to the physics of power systems used operate robots, which statement or statements are most correct? A : hydraulics involves the compression of liquids B : hydraulics involves the compression of air C : pneumatic involves the compression of air D : chemical batteries produce AC power

Last Answer : C : pneumatic involves the compression of air

With regard to the expressive power of the formal relational Query languages, which of the following statements is TRUE?

Description : With regard to the expressive power of the formal relational Query languages, which of the following statements is TRUE?  A) relational algebra is more powerful than relational calculus B) relational ... calculus C) relational algebra has the same power as safe relational calculus D) None of these

Last Answer : relational algebra has the same power as safe relational calculus

High vacuum diodes, gas-filled diodes, and germanium semiconductor diodes may all be used as _____________. A. potentiometers B. rectifiers C. power sources D. photocells

Description : High vacuum diodes, gas-filled diodes, and germanium semiconductor diodes may all be used as _____________. A. potentiometers B. rectifiers C. power sources D. photocells

Last Answer : Answer: B

Heat sinks are frequently used with _____________. A. power transistors B. vacuum tubes C. tunnel rectifier diodes D. all of the above

Description : Heat sinks are frequently used with _____________. A. power transistors B. vacuum tubes C. tunnel rectifier diodes D. all of the above

Last Answer : Answer: A

Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Description : Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Last Answer : D) All of the above.

Which one of the following statements is not correct? A Since voltage depends on concentrations, using standard conditions makes it easier to compare different electrochemical reactions. B We have to measure the cell potential to obtain the difference in potential energy because the potential of half-reactions cannot be measured directly. C The direction of a redox reaction can only be determined experimentally. D Half-cell potentials for half-reactions are determined by combining the relevant half-cell with a standardised half-cell.

Description : Which one of the following statements is not correct? A Since voltage depends on concentrations, using standard conditions makes it easier to compare different electrochemical reactions. B We have ... half-reactions are determined by combining the relevant half-cell with a standardised half-cell.

Last Answer : C The direction of a redox reaction can only be determined experimentally. 

In genetic engineering, a DNA segment (gene) of interest, is transferred to the host cell through a vector. Consider the following four agents (i-iv) in this regard and select the correct option about which one or more of these can be used as a vector/vectors. (i) Bacterium (ii) Plasmid (iii)Plasmodium (iv) Bacteriophage (a) (i), (ii) and (iv) (b) (i) only (c) (i) and (iii) (d) (ii) and (iv)

Description : In genetic engineering, a DNA segment (gene) of interest, is transferred to the host cell through a vector. Consider the following four agents (i-iv) in this regard and select the correct option about which one or more of these ... ii) and (iv) (b) (i) only (c) (i) and (iii) (d) (ii) and (iv)

Last Answer : (d) (ii) and (iv)

Consider the following statement: (1) There is no difference between the English Law and Indian Law with regard to acceptance through post. (2) Both Under the English Law and the Indian Law a contract is concluded when the letter of acceptance is posted. (3) Under the Indian Law when the Letter of acceptance is posted it is completed only as against the proposer. Which of the above statement is/are correct? (a)1 and 2 (b) 2 alone (c) 3 alone (d) None

Description : Consider the following statement: (1) There is no difference between the English Law and Indian Law with regard to acceptance through post. (2) Both Under the English Law and the Indian Law a contract is concluded when the ... statement is/are correct? (a)1 and 2 (b) 2 alone (c) 3 alone (d) None

Last Answer : (c) 3 alone

The torque produced by a motor when its shaft will not turn, even though rated voltage is applied to the stator, is known as _____________. A. locked-rotor torque B. pullout torque C. breakdown torque D. torque margin

Description : The torque produced by a motor when its shaft will not turn, even though rated voltage is applied to the stator, is known as _____________. A. locked-rotor torque B. pullout torque C. breakdown torque D. torque margin

Last Answer : Answer: A

For a dielectric which of the following properties hold good? a) They are superconductors at high temperatures b) They are superconductors at low temperatures c) They can never become a superconductor d) They have very less dielectric breakdown voltage

Description : For a dielectric which of the following properties hold good? a) They are superconductors at high temperatures b) They are superconductors at low temperatures c) They can never become a superconductor d) They have very less dielectric breakdown voltage

Last Answer : b) They are superconductors at low temperatures

The breakdown voltage of a cable depends on (a) presence of moisture (b) working temperature (c) time of application of the voltage (d) all of the above

Description : The breakdown voltage of a cable depends on (a) presence of moisture (b) working temperature (c) time of application of the voltage (d) all of the above

Last Answer : (d) all of the above

All of the following statements about generalized gangliosidosis are true except (A) It results from deficiency of GM1-βGangliosidase (B) Breakdown of GM1 ganglioside is impaired (C) GM2 ganglioside accumulates in liver and elsewhere (D) It leads to mental retardation

Description : All of the following statements about generalized gangliosidosis are true except (A) It results from deficiency of GM1-βGangliosidase (B) Breakdown of GM1 ganglioside is impaired (C) GM2 ganglioside accumulates in liver and elsewhere (D) It leads to mental retardation

Last Answer : Answer : C

Which one of the following statements best defines the purpose of a Product Breakdown Structure (PBS)? a. To define the hierarchy of deliverables that are required to be produced on the project. b. To define how the products are produced by identifying derivations and dependencies. c. To establish the extent of work required prior to project commissioning and the handover. d. To identify the health and safety strategies and procedures to be used on the project

Description : Which one of the following statements best defines the purpose of a Product Breakdown Structure (PBS)? a. To define the hierarchy of deliverables that are required to be produced on the project. ... . d. To identify the health and safety strategies and procedures to be used on the project

Last Answer : a. To define the hierarchy of deliverables that are required to be produced on the project.

Which one of the following statements best defines the purpose of a Product Breakdown Structure(PBS)? a. To define the hierarchy of deliverables that are required to be produced on the project. b. To define how the products are produced by identifying derivations and dependencies. c. To establish the extent of work required prior to project commissioning and the handover. d. To identify the health and safety strategies and procedures to be used on the project.

Description : Which one of the following statements best defines the purpose of a Product Breakdown  Structure(PBS)?  a. To define the hierarchy of deliverables that are required to be produced on the project.  b. ... .  d. To identify the health and safety strategies and procedures to be used on the project.

Last Answer : a. To define the hierarchy of deliverables that are required to be produced on the project.

Which one of the following statements is incorrect? (a) The competitive inhibitor does not affect the rate of breakdown of the enzyme-substrate complex. (b) The presence of the competitive inhibitor decreases the Km of the enzyme for the substrate. (c) A competitive inhibitor reacts reversibly with the enzyme to form an enzyme-inhibitor complex. (d) In competitive inhibition, the inhibitor molecule is not chemically changed by the enzyme.

Description : Which one of the following statements is incorrect? (a) The competitive inhibitor does not affect the rate of breakdown of the enzyme-substrate complex. (b) The presence of the competitive inhibitor ... . (d) In competitive inhibition, the inhibitor molecule is not chemically changed by the enzyme.

Last Answer : (b) The presence of the competitive inhibitor decreases the Km of the enzyme for the substrate

which of the following statements is true with regard to pakistan -General Knowledge

Description : which of the following statements is true with regard to pakistan -General Knowledge

Last Answer : A. Religion has no role in the legal system.

in regard to exercise, which of the following statements about safety consideration is correct? -General Knowledge

Description : in regard to exercise, which of the following statements about safety consideration is correct? -General Knowledge

Last Answer : In regard to exercise, the following statement about safety consideration is correct: Remaining well-hydrated while exercising is best.

which of the following statements is correct in regard to apical and floral meristems? -General Knowledge

Description : which of the following statements is correct in regard to apical and floral meristems? -General Knowledge

Last Answer : (B) Apical meristems are sometimes changed into floral meristems

Which one of the following statements in regard to the excretion by the human kidneys is correct?

Description : Which one of the following statements in regard to the excretion by the human kidneys is correct?

Last Answer : Which one of the following statements in regard to the excretion by the human kidneys is ... glomerular filtrate is reabsorbed by the renal tubules

Which one of the following statements in regard to the excretion by the human kidneys is correct?

Description : Which one of the following statements in regard to the excretion by the human kidneys is correct?

Last Answer : Which one of the following statements in regard to the excretion by the human kidneys is correct ... of Loop of Henly is impermeable to electrolytes

Which of these statements is not true with regard to starting a new job?

Description : Which of these statements is not true with regard to starting a new job?

Last Answer : No one will be paying any attention to you or watching to see what type of person you are.