A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

A communication device that combines transmissions from several I/O devices into one line is a  A) Concentrator B) Modifier
C) Multiplexer D) Full duplex file
by

1 Answer

Answer :

C) Multiplexer
by

Related questions

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Description : A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Last Answer : multiplexer

Which of the following does not allow multiple uses or devices to share one communication line? a. doubleplexer b. multiplexer c. concentrator d. controller

Description : Which of the following does not allow multiple uses or devices to share one communication line? a. doubleplexer b. multiplexer c. concentrator d. controller

Last Answer : concentrator

A multiplexer combines four 100-Kbps channels using a time slot of 2 bits. What is the bit rate? (A) 100 Kbps (B) 200 Kbps (C) 400 kbps (D) 1000 Kbps

Description : A multiplexer combines four 100-Kbps channels using a time slot of 2 bits. What is the bit rate? (A) 100 Kbps (B) 200 Kbps (C) 400 kbps (D) 1000 Kbps

Last Answer : (C) 400 kbps

Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half duplex line is a communication line in which data can move in two directions, but not at the same time. c. Teleprocessing combines telecommunications and DP techniques in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex

Description : Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex

Last Answer : B) Half-duplex

Which of the following might be used by a company to satisfy its growing communications needs? a. front end processor b. multiplexer c. controller d. concentrator e. all of the above

Description : Which of the following might be used by a company to satisfy its growing communications needs? a. front end processor b. multiplexer c. controller d. concentrator e. all of the above

Last Answer : all of the above

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

A terminal multiplexer has six 1200 bps terminals and ‘n’ 300 bps terminals connected to it. If the outgoing line is 9600 bps, what is the value of n ? (A) 4 (B) 8 (C) 16 (D) 28

Description : A terminal multiplexer has six 1200 bps terminals and ‘n’ 300 bps terminals connected to it. If the outgoing line is 9600 bps, what is the value of n ? (A) 4 (B) 8 (C) 16 (D) 28

Last Answer : (B) 8

Which of the following is not the function of Microkernel? A) File management B) Low-level memory management C) Inter-process communication D) I/O interrupts management

Description : Which of the following is not the function of Microkernel? A) File management B) Low-level memory management C) Inter-process communication D) I/O interrupts management

Last Answer : A) File management

Which of the following is a sequential circuit? (A) Multiplexer (B) Decoder (C) Counter (D) Full adder

Description : Which of the following is a sequential circuit? (A) Multiplexer (B) Decoder (C) Counter (D) Full adder

Last Answer : (C) Counter

Which of the following does not allow multiple users or devices toshare onecommunications line? A. doubleplexer B. multipplexer C. concentrator D. controller E. None of the above

Description : Which of the following does not allow multiple users or devices toshare onecommunications line? A. doubleplexer B. multipplexer C. concentrator D. controller E. None of the above

Last Answer : doubleplexer

What is a modifier?

Description : What is a modifier?

Last Answer : A: A modifier is a keyword placed in a class, method or variable declaration that changes how it operates. Examples of modifiers are: abstract, final, static etc.

Binary symmetric channel uses (A) Half duplex protocol (B) Full duplex protocol (C) Bit oriented protocol (D) None of the above

Description : Binary symmetric channel uses (A) Half duplex protocol (B) Full duplex protocol (C) Bit oriented protocol (D) None of the above

Last Answer : (A) Half duplex protocol

HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control

Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway

Description : Devices on one network can communicate with devices on another network via a ....... A) File Server B) Utility Server C) Printer Server D) Gateway

Last Answer : D) Gateway

In a ................topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Description : In a ................topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Last Answer : A) Mesh

Data flow between two devices canoccur in a _______ way. A) simplex B) half-duplex C) full-duplex D) all of theabove

Description : Data flow between two devices canoccur in a _______ way. A) simplex B) half-duplex C) full-duplex D) all of theabove

Last Answer : all of theabove

The transmission mode which allows both communicating devices to transmit and receive data simultaneously is: a) Full Duplex b) Simplex c) Half Duplex d) Simple Complex e) None of These

Description : The transmission mode which allows both communicating devices to transmit and receive data simultaneously is: a) Full Duplex b) Simplex c) Half Duplex d) Simple Complex e) None of These

Last Answer : a) Full Duplex

The essential difference between traps and interrupts is (A) traps are asynchronous and interrupts are synchronous with the program (B) traps are synchronous and interrupts are asynchronous with the program (C) traps are synchronous and interrupts are asynchronous with the I/O devices. (D) None of these.

Description : The essential difference between traps and interrupts is (A) traps are asynchronous and interrupts are synchronous with the program (B) traps are synchronous and interrupts are asynchronous with the program ( ... synchronous and interrupts are asynchronous with the I/O devices. (D) None of these.

Last Answer : (B) traps are synchronous and interrupts are asynchronous with the program

One of the main features that distinguish microprocessor from microcomputers is (A) words are usually larger in microprocessors. (B) words are shorter in microprocessors. (C) microprocessor does not contain I/O devices. (D) None of the above.

Description : One of the main features that distinguish microprocessor from microcomputers is (A) words are usually larger in microprocessors. (B) words are shorter in microprocessors. (C) microprocessor does not contain I/O devices. (D) None of the above.

Last Answer : (C) microprocessor does not contain I/O devices.

The distributed system is a collection of (P) and communication is achieved in distributed system by (Q) , where (P) and (Q) are : (A) Loosely coupled hardware on tightly coupled software and disk sharing, respectively. (B) Tightly coupled hardware on loosely coupled software and shared memory, respectively. (C) Tightly coupled software on loosely coupled hardware and message passing ,respectively. (D) Loosely coupled software on tightly coupled hardware and file sharing, respectively.

Description : The distributed system is a collection of (P) and communication is achieved in distributed system by (Q) , where (P) and (Q) are : (A) Loosely coupled hardware on tightly ... message passing ,respectively. (D) Loosely coupled software on tightly coupled hardware and file sharing, respectively.

Last Answer : (C) Tightly coupled software on loosely coupled hardware and message passing ,respectively. 

The device that converts digital signals to analog signals at the start of long distance transmissions is (1) peripheral (2) modem (3) telephone (4) antenna

Description : The device that converts digital signals to analog signals at the start of long distance transmissions is (1) peripheral (2) modem (3) telephone (4) antenna

Last Answer : modem

In mode, the communication channel is used in both directions at the same time? A) Full-duplex B) Simplex C) Half-duplex D) None of the above

Description : In mode, the communication channel is used in both directions at the same time? A) Full-duplex B) Simplex C) Half-duplex D) None of the above

Last Answer : Answer : A

Which data communication method is used to transmit the data over a serial communication link? a. simplex b. half-duplex c. full-duplex d. b and c e. None of above

Description : Which data communication method is used to transmit the data over a serial communication link? a. simplex b. half-duplex c. full-duplex d. b and c e. None of above

Last Answer : full-duplex

Communication between acomputer and a keyboardinvolves______________ transmission. A) simplex B) half-duplex C) full-duplex D) automatic

Description : Communication between acomputer and a keyboardinvolves______________ transmission. A) simplex B) half-duplex C) full-duplex D) automatic

Last Answer : simplex

Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex

Description : Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex

Last Answer : B) Half-duplex

Which mode of Communication occurs between a computer and a keyboard. a. Automatic b. Half-duplex c. Full-duplex d. Simplex

Description : Which mode of Communication occurs between a computer and a keyboard. a. Automatic b. Half-duplex c. Full-duplex d. Simplex

Last Answer : d. Simplex

A communication between a computer and a keyboard involves ____________ transmission. a) simplex b) half duplex c) full duplex d) semi-duplex

Description : A communication between a computer and a keyboard involves ____________ transmission. a) simplex b) half duplex c) full duplex d) semi-duplex

Last Answer : a) simplex

Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex

Description : Which of the communication modes support two way traffic but in only once direction of a time? A) Simplex B) Half-duplex C) Three - quarter's duplex D) Full duplex

Last Answer : B) Half-duplex

Compare between simplex and full duplex communication on the basis of: 1) Definition 2) Sketch

Description : Compare between simplex and full duplex communication on the basis of: 1) Definition 2) Sketch

Last Answer : Compare between simplex and full duplex communication on the basis of: 1) Definition 2) Sketch

Which of the following statements is true? (A) Smart cards do not require an operating system. (B) Smart cards and PCs use some operating system. (C) COS is smart card operating system. (D) The communication between reader and card is in full duplex mode.

Description : Which of the following statements is true? (A) Smart cards do not require an operating system. (B) Smart cards and PCs use some operating system. (C) COS is smart card operating system. (D) The communication between reader and card is in full duplex mode.

Last Answer : (C) COS is smart card operating system

........... is a large kernel, including scheduling file system, networking, device drivers, memory management and more. A) Monolithic kernel B) Micro kernel C) Macro kernel D) Mini kernel

Description : ........... is a large kernel, including scheduling file system, networking, device drivers, memory management and more. A) Monolithic kernel B) Micro kernel C) Macro kernel D) Mini kernel

Last Answer : A) Monolithic kernel

........... is a large kernel containing virtually the complete operating system, including, scheduling, file system, device drivers and memory management. A) Multilithic kernel B) Monolithic kernel C) Micro kernel D) Macro kernel

Description : ........... is a large kernel containing virtually the complete operating system, including, scheduling, file system, device drivers and memory management. A) Multilithic kernel B) Monolithic kernel C) Micro kernel D) Macro kernel

Last Answer : B) Monolithic kernel

A unix file may be of type: (A) Regular file (B) Directory File (C) Device File (D) Any one of the above

Description : A unix file may be of type: (A) Regular file (B) Directory File (C) Device File (D) Any one of the above 

Last Answer : (D) Any one of the above

In Unix operating system, special files are used to : (A) buffer data received in its input from where a process reads (B) provide a mechanism to map physical device to file names (C) store list of file names plus pointers associated with i-nodes (D) store information entered by a user application program or utility program

Description : In Unix operating system, special files are used to : (A) buffer data received in its input from where a process reads (B) provide a mechanism to map physical device to file names (C ... pointers associated with i-nodes (D) store information entered by a user application program or utility program

Last Answer : (B) provide a mechanism to map physical device to file names 

A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? (A) 50 (B) 200 (C) 400 (D) 800

Description : A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? (A) 50 (B) 200 (C) 400 (D) 800

Last Answer : (C) 400 Explanation: 1,00,000 characters = 1,00,000 x 8 bits = 8,00,000 bits 8,00,000 bits/2000 bps = 400 seconds

The different types of tables maintained by the operating system are ............. A) memory, logical , I/O file B) memory, I/O, file, physical C) memory, I/O, file, process D) memory, logical, I/O, physical

Description : The different types of tables maintained by the operating system are ............. A) memory, logical , I/O file B) memory, I/O, file, physical C) memory, I/O, file, process D) memory, logical, I/O, physical

Last Answer : C) memory, I/O, file, process

In RISC architecture access to registers is made as a block and register file in a particular register can be selected by using: a. Multiplexer b. Decoder c. Subtractor d. Adder

Description : In RISC architecture access to registers is made as a block and register file in a particular register can be selected by using: a. Multiplexer b. Decoder c. Subtractor d. Adder

Last Answer : b. Decoder

Multiplexing in a time division multiplexer occurs based upon A. the position of a frame within the group of frames B. the positioning of data within a frame C. the priority assigned to a connected device D. the activity of a connected device

Description : Multiplexing in a time division multiplexer occurs based upon A. the position of a frame within the group of frames B. the positioning of data within a frame C. the priority assigned to a connected device D. the activity of a connected device

Last Answer : B. the positioning of data within a frame

An STS multiplexer is a ______ device. A) one-layer B) two-layer C) three-layer D) four-layer

Description : An STS multiplexer is a ______ device. A) one-layer B) two-layer C) three-layer D) four-layer

Last Answer : two-layer

A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Description : A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Last Answer : Ans: B A device which converts BCD to Seven Segment is called DECODER. (A decoder coverts binary words into alphanumeric characters.)

The device which changes from serial data to parallel data is (A) COUNTER (B) MULTIPLEXER (C) DEMULTIPLEXER (D) FLIP-FLOP

Description : The device which changes from serial data to parallel data is (A) COUNTER (B) MULTIPLEXER (C) DEMULTIPLEXER (D) FLIP-FLOP

Last Answer : Ans: C The device which changes from serial data to parallel data is demultiplexer. (A demultiplexer takes in data from one line and directs it to any of its N outputs depending on the status of the select inputs.)

Which of the following communication modes support two-way traffic but in only one direction at a time? a. simplex b. half duplex c. three-quarters duplex d. all of the above e. none of the above

Description : Which of the following communication modes support two-way traffic but in only one direction at a time? a. simplex b. half duplex c. three-quarters duplex d. all of the above e. none of the above

Last Answer : half duplex

The communication modethat supports two-way traffic but only one direction at atime is A. simplex B. duplex C. half duplex D. multiplex E. None of the above

Description : The communication modethat supports two-way traffic but only one direction at atime is A. simplex B. duplex C. half duplex D. multiplex E. None of the above

Last Answer : half duplex

Computer to computer communication is: (A) Simplex (B) Duplex (C) Half Duplex (D) Both Duplex and Half Duplex

Description : Computer to computer communication is: (A) Simplex (B) Duplex (C) Half Duplex (D) Both Duplex and Half Duplex

Last Answer : (B) Duplex

_____ is a bi-directional, fully duplex communication model that uses a persistent connection between client and server. A. Request-Response B. Publish-Subscriber C. Push-Pull D. Exclusive Pair

Description :  _____ is a bi-directional, fully duplex communication model that uses a persistent connection between client and server. A. Request-Response B. Publish-Subscriber C. Push-Pull D. Exclusive Pair

Last Answer : D. Exclusive Pair 

Compare between simplex and duplex communication

Description : Compare between simplex and duplex communication 

Last Answer : simplex and duplex communication :

A 400 W carrier is amplitude modulated to a depth of 75%.Calculate the total power in AM wave. (i) Explain the types of noise in a communication system. (ii) Compare simplex and duplex mode of communication.

Description : A 400 W carrier is amplitude modulated to a depth of 75%.Calculate the total power in AM wave. (i) Explain the types of noise in a communication system. (ii) Compare simplex and duplex mode of communication.

Last Answer : (i) Noise: Noise is any spurious or undesired disturbances that mask the received signal in a communication system. a) Atmospheric Noise: Atmospheric Noise is also known as static noise which is the ... remote control ExamplesWalkytalky,telephone,mobile,Radar, FAX,Pager 4