A terminal multiplexer has six 1200 bps terminals and ‘n’ 300 bps terminals connected to it. If the outgoing line is 9600 bps, what is the value of n ? (A) 4 (B) 8 (C) 16 (D) 28

A terminal multiplexer has six 1200 bps terminals and ‘n’ 300 bps terminals connected to it. If the outgoing line is 9600 bps, what is the value of n ? (A) 4 (B) 8 (C) 16 (D) 28
by

1 Answer

Answer :

(B) 8
by

Related questions

What arethe most commonly used transmission speeds in BPS usedin datacommunication? A. 300 B. 1200 C. 2400 D. 9600 E. None of the above

Description : What arethe most commonly used transmission speeds in BPS usedin datacommunication? A. 300 B. 1200 C. 2400 D. 9600 E. None of the above

Last Answer : 9600

If digitaldata rateof 9600 bps is encoded using 8-level phaseshift keying (PSK) method, the modulation rate is A. 1200 bands B. 3200 bands C. 4800 bands D. 9600 bands E. None of the above

Description : If digitaldata rateof 9600 bps is encoded using 8-level phaseshift keying (PSK) method, the modulation rate is A. 1200 bands B. 3200 bands C. 4800 bands D. 9600 bands E. None of the above

Last Answer : 3200 bands

Explain the speed of 9600 bps . ?

Description : Explain the speed of 9600 bps . ?

Last Answer : 9600 bps Speed ​​is the voice band. 9600 bps means 9600 bits of data is transferred per second . Voice bands typically transfer data up to 9600 bps . This bandwidth is used in telephone lines. This bandwidth is also used to transfer data to computers and peripheral devices.

If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200

Description : If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200

Last Answer : 1000

If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Description : If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Last Answer : 1200

f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Description : f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Last Answer : 1200

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

The voltage induced across a certain coil is 200 mV. A 1200 resistor is connected to the coil terminals....

Description : The voltage induced across a certain coil is 200 mV. A 1200 resistor is connected to the coil terminals. The induced current will be: A. 1.7 mA B. 16 mA C. 12 mA D. 120 mA

Last Answer : The voltage induced across a certain coil is 200 mV. A 1200 resistor is connected to the coil terminals. The induced current will be: 1.7 mA

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

A tank can be filled by an inlet tap at the rate of 8 litres per minute. A leak in the bottom of a tank can empty the full tank in 16 hours. When the tank is full, the inlet is opened and due to the leak, the tank is empty in 80 hours. How many litres does the tank hold? A) 8000 litre B) 9560 litre C) 8525 litre D) 9600 litre

Description : A tank can be filled by an inlet tap at the rate of 8 litres per minute. A leak in the bottom of a tank can empty the full tank in 16 hours. When the tank is full, the inlet is opened and due to ... hours. How many litres does the tank hold? A) 8000 litre B) 9560 litre C) 8525 litre D) 9600 litre

Last Answer : D Part emptied by the leak in 1 hour = 1/16 part filled by (leak & inlet open) in 1 hour = 1/80 Part filled by the inlet tap in 1 hour = 1/16 – 1/80 = 1/20 Inlet tap fills the tank in = 20 hours Inlet tap fills water at the rate of 8 litres a minute. Capacity of tank = 20 * 60 * 8= 9600 litre

Iridium satellites can provide data communications of up ____ bps data rate. A. 1200 B. 4800 C. 2400 D. 3840

Description : Iridium satellites can provide data communications of up ____ bps data rate. A. 1200 B. 4800 C. 2400 D. 3840

Last Answer : C. 2400

Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Description : Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Last Answer : 120

The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Description : The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Last Answer : Answer: C

In a demand paging memory system, page table is held in registers. The time taken to service a page fault is 8 m.sec. if an empty frame is available or if the replaced page is not modified, and it takes 20 m.secs., if the replaced page is modified. What is the average access time to service a page fault assuming that the page to be replaced is modified 70% of the time ? (A) 11.6 m.sec. (B) 16.4 m.sec. (C) 28 m.sec. (D) 14 m.sec.

Description : In a demand paging memory system, page table is held in registers. The time taken to service a page fault is 8 m.sec. if an empty frame is available or if the replaced page is not modified, and it takes 20 m.secs., if the replaced ... ? (A) 11.6 m.sec. (B) 16.4 m.sec. (C) 28 m.sec. (D) 14 m.sec.

Last Answer : (B) 16.4 m.sec. 

A software project was estimated at 352 Function Points (FP). A four person team will be assigned to this project consisting of an architect, two programmers, and a tester. The salary of the architect is Rs.80,000 per month, the programmer Rs.60,000 per month and the tester Rs.50,000 per month. The average productivity for the team is 8 FP per person month. Which of the following represents the projected cost of the project? (1) Rs.28,16,000 (2) Rs.20,90,000 (3) Rs.26,95,000 (4) Rs.27,50,000

Description : A software project was estimated at 352 Function Points (FP). A four person team will be assigned to this project consisting of an architect, two programmers, and a tester. The salary of the architect is Rs.80,000 per month, the ... ) Rs.28,16,000 (2) Rs.20,90,000 (3) Rs.26,95,000 (4) Rs.27,50,000

Last Answer : (4) Rs.27,50,000 

An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & 1000 bps (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps

Description : In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps

Last Answer : (C) 1000 bps 

An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Last Answer : (B) 3 bits/baud

A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? (A) 50 (B) 200 (C) 400 (D) 800

Description : A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? (A) 50 (B) 200 (C) 400 (D) 800

Last Answer : (C) 400 Explanation: 1,00,000 characters = 1,00,000 x 8 bits = 8,00,000 bits 8,00,000 bits/2000 bps = 400 seconds

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps

Last Answer : (D) 3200 bps Answer: D Explanation: The multiplexer is shown in the Figure. Each frame carries 1 byte from each channel; the size of each frame, therefore, is 4 bytes, or 32 bits. Because each ... channel, the frame rate must be 100 frames per second. The bit rate is 100 32 = 3200 bps. 

Which statement is not correct about “init” process in Unix? (1) It is generally the parent of the login shell. (2) It has PID 1. (3) It is the first process in the system. (4) Init forks and execs a ‘getty’ process at every port connected to a terminal.

Description : Which statement is not correct about “init” process in Unix? (1) It is generally the parent of the login shell. (2) It has PID 1. (3) It is the first process in the system. (4) Init forks and execs a ‘getty’ process at every port connected to a terminal.

Last Answer : It is the first process in the system.

Which of the following is a sequential circuit? (A) Multiplexer (B) Decoder (C) Counter (D) Full adder

Description : Which of the following is a sequential circuit? (A) Multiplexer (B) Decoder (C) Counter (D) Full adder

Last Answer : (C) Counter

A multiplexer combines four 100-Kbps channels using a time slot of 2 bits. What is the bit rate? (A) 100 Kbps (B) 200 Kbps (C) 400 kbps (D) 1000 Kbps

Description : A multiplexer combines four 100-Kbps channels using a time slot of 2 bits. What is the bit rate? (A) 100 Kbps (B) 200 Kbps (C) 400 kbps (D) 1000 Kbps

Last Answer : (C) 400 kbps

Which of the following is the demerit of a 'constant voltage transmission system' ? (a) Increase of short-circuit current of the system (b) Availability of steady voltage at all loads at the line terminals (c) Possibility of better protection for the line due to possible use of higher terminal reactants (d) Improvement of power factor at times of moderate and heavy loads (e) Possibility of carrying increased power for a given conductor size in case of long-distance heavy power transmission

Description : Which of the following is the demerit of a 'constant voltage transmission system' ? (a) Increase of short-circuit current of the system (b) Availability of steady voltage at all loads at ... of carrying increased power for a given conductor size in case of long-distance heavy power transmission

Last Answer : (a) Increase of short-circuit current of the system

Which of the following is the demerit of a 'constant voltage transmission system' ? (a) Increase of short-circuit current of the system (b) Availability of steady voltage at all loads at the line terminals (c) Possibility of better protection for the line due to possible use of higher terminal reactants (d) Improvement of power factor at times of moderate and heavy loads (e) Possibility of carrying increased power for a given conductor size in case of long-distance heavy power transmission

Description : Which of the following is the demerit of a 'constant voltage transmission system' ? (a) Increase of short-circuit current of the system (b) Availability of steady voltage at all loads at ... of carrying increased power for a given conductor size in case of long-distance heavy power transmission

Last Answer : (a) Increase of short-circuit current of the system

The total agricultural land in a village is 1200 hectares. This is distributed among 320 families who form four groups in the following pattern. It is assumed that the land is distributed equally within each group. Identify the group of small farmers. Gr ou p Num ber of Tot al am ou nt of land Fam i l i es ow ned and oper at ed by each gr oup (i n hect ar es) A 100 300 B 180 300 C 30 300 D 10 300 (1) A (2) B (3) C (4) D

Description : The total agricultural land in a village is 1200 hectares. This is distributed among 320 families who form four groups in the following pattern. It is assumed that the land is distributed equally within each group. Identify the group of small ... B 180 300 C 30 300 D 10 300 (1) A (2) B (3) C (4) D

Last Answer : B 180 300

Ratio of ages of three girls are 5:8:10, six years ago, the sum of their ages was 28. Find their present ages. a) 16,10,20 b) 12,28,36 c) 10,16,20 d) 16,28,36

Description : Ratio of ages of three girls are 5:8:10, six years ago, the sum of their ages was 28. Find their present ages. a) 16,10,20 b) 12,28,36 c) 10,16,20 d) 16,28,36

Last Answer : C Let the present ages are 5x, 8x, 10x. => (5x-6) + (8x-6) + (10x-6) = 28 => 23x = 46 => x = 2 So their present ages are: 10,16,20

Consider a sequence F00 defined as: Image Then what shall be the set of values of the sequence F00? (1) (1, 110, 1200) (2) (1, 110, 600, 1200) (3) (1, 2, 55, 110, 600, 1200) (4) (1, 55, 110, 600, 1200)

Description : Consider a sequence F00 defined as: Then what shall be the set of values of the sequence F00? (1) (1, 110, 1200) (2) (1, 110, 600, 1200) (3) (1, 2, 55, 110, 600, 1200) (4) (1, 55, 110, 600, 1200)

Last Answer : Answer: 1 Explanation: We have given, F00(0) = 1, F00(1) = 1 F00(2) = (10*F00(1) + 100)/F00(0) = 110 F00(3) = (10*F00(2) + 100)/F00(1) = 1200 F00(4) = (10*F00(3) + ... (2) = 110 Since the values repeats after the first three values, the set of values of F00 will be (1,110,1200).

ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits of data per character and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Last Answer : C. 320 bps

Multiplexing in a time division multiplexer occurs based upon A. the position of a frame within the group of frames B. the positioning of data within a frame C. the priority assigned to a connected device D. the activity of a connected device

Description : Multiplexing in a time division multiplexer occurs based upon A. the position of a frame within the group of frames B. the positioning of data within a frame C. the priority assigned to a connected device D. the activity of a connected device

Last Answer : B. the positioning of data within a frame

The ring circuit of the system shown in the illustration would become inoperative if a ground developed at ____________. EL-0093 A. either terminal 'T' or 'C' B. either terminal 'B' or 'R' C. both terminals 'B' and 'C' D. both terminals 'T' and 'R'

Description : The ring circuit of the system shown in the illustration would become inoperative if a ground developed at ____________. EL-0093 A. either terminal 'T' or 'C' B. either terminal 'B' or 'R' C. both terminals 'B' and 'C' D. both terminals 'T' and 'R'

Last Answer : Answer: C

In which of the following terminals the screen is regarded as an array of pixels, where each pixel is either on or off: a) Character Map Terminal b) Bit Map Terminal c) RS 232 C Terminal d) None of The Above

Description : In which of the following terminals the screen is regarded as an array of pixels, where each pixel is either on or off: a) Character Map Terminal b) Bit Map Terminal c) RS 232 C Terminal d) None of The Above

Last Answer : b) Bit Map Terminal

There is one application, which runs on a single terminal. There is another application that works on multiple terminals. What are the test techniques you will use on the second application that you would not do on the first application? A. Integrity, Response time B. Concurrency test, Scalability C. Update & Rollback, Response time D. Concurrency test, Integrity

Description : There is one application, which runs on a single terminal. There is another application that works on multiple terminals. What are the test techniques you will use on the second application that ... B. Concurrency test, Scalability C. Update & Rollback, Response time D. Concurrency test, Integrity

Last Answer : C. Update & Rollback, Response time

Which of the following statements is not true with respect to microwaves? (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz. (B) Propagation is line-of-sight. (C) Very high-frequency waves cannot penetrate walls. (D) Use of certain portions of the band requires permission from authorities.

Description : Which of the following statements is not true with respect to microwaves? (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz. (B) Propagation is line-of-sight. (C) Very ... waves cannot penetrate walls. (D) Use of certain portions of the band requires permission from authorities.

Last Answer : (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz.

In a fully connected mesh network with n devices, there are ................ physical channels to link all devices. (A) n(n–1)/2 (B) n(n+1)/2 (C) 2n (D) 2n+1

Description : In a fully connected mesh network with n devices, there are ................ physical channels to link all devices. (A) n(n–1)/2 (B) n(n+1)/2 (C) 2n (D) 2n+1

Last Answer : (A) n(n–1)/2

How many edges must be removed to produce the spanning forest of a graph with N vertices, M edges and C connected components? (A) M+N-C (B) M-N-C (C) M-N+C (D) M+N+C

Description : How many edges must be removed to produce the spanning forest of a graph with N vertices, M edges and C connected components? (A) M+N-C (B) M-N-C (C) M-N+C (D) M+N+C

Last Answer : (C) M-N+C

Consider a Hamiltonian Graph (G) with no loops and parallel edges. Which of the following is true with respect to this Graph (G) ? (a) deg(v) ≥ n/2 for each vertex of G (b) |E(G)| ≥ 1/2 (n-1)(n-2)+2 edges (c) deg(v) + deg(w) ≥ n for every v and w not connected by an edge (A) (a) and (b) (B) (b) and (c) (C) (a) and (c) (D) (a), (b) and (c)

Description : Consider a Hamiltonian Graph (G) with no loops and parallel edges. Which of the following is true with respect to this Graph (G) ? (a) deg(v) ≥ n/2 for each vertex of G (b) |E(G)| ≥ 1/2 (n-1)(n-2)+2 edges (c) deg(v) + deg( ... edge (A) (a) and (b) (B) (b) and (c) (C) (a) and (c) (D) (a), (b) and (c)

Last Answer : (D) (a), (b) and (c)

The potential differnce between the terminals of a battery of emf 6.0 V and internal resistance `1 Omega` drops to 5.8 V when connected across an exte

Description : The potential differnce between the terminals of a battery of emf 6.0 V and internal resistance `1 Omega` drops to 5.8 V when connected across an exte

Last Answer : The potential differnce between the terminals of a battery of emf 6.0 V and internal resistance ... resistor . Find the resistance of the external res

A very famous chemist was found murdered in his kitchen today. The police have narrowed it down to six suspects. They know it was a two man job. Their names: Felice, Maxwell, Archibald, Nicolas, Jordan, and Xavier. A note was also found with the body: '26-3-58/28-27-57-16'. Who are the killers? -Riddles

Description : A very famous chemist was found murdered in his kitchen today. The police have narrowed it down to six suspects. They know it was a two man job. Their names: Felice, Maxwell, Archibald, Nicolas, Jordan, and Xavier ... was also found with the body: '26-3-58/28-27-57-16'. Who are the killers? -Riddles

Last Answer : Felice and Nicholas are the murderers. The numbers correspond to atomic numbers on the periodic table of elements: 'Fe-Li-Ce/Ni-Co-La-S'.

The number of control lines for 32 to 1 multiplexer is (A) 4. (B) 5. (C) 16. (D) 6.

Description : The number of control lines for 32 to 1 multiplexer is (A) 4. (B) 5. (C) 16. (D) 6.

Last Answer : Ans: B The number of control lines for 32 (2^5) and to select one input among them total 5 select lines are required.

The number of control lines for 16 to 1 multiplexer is (A) 2. (B) 4. (C) 3. (D) 5.

Description : The number of control lines for 16 to 1 multiplexer is (A) 2. (B) 4. (C) 3. (D) 5.

Last Answer : (B) 4.

How many select lines will a 16 to 1 multiplexer will have (A) 4 (B) 3 (C) 5 (D) 1

Description : How many select lines will a 16 to 1 multiplexer will have (A) 4 (B) 3 (C) 5 (D) 1

Last Answer : (A) 4

Number of control lines required for 16 to 1 multiplexer is

Description : Number of control lines required for 16 to 1 multiplexer is

Last Answer : Number of control lines required for 16 to 1 multiplexer is 4

What is the maximum principle stress induced in a solid shaft of 40 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 150 kN.mm respectively? a. 21.69 N/mm2 b. 28.1 N/mm2 c. 50.57 N/mm2 d. 52.32 N/mm2

Description : What is the maximum principle stress induced in a solid shaft of 40 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 150 kN.mm respectively? a. 21.69 N/mm2 b. 28.1 N/mm2 c. 50.57 N/mm2 d. 52.32 N/mm2

Last Answer : c. 50.57 N/mm2

What will be the values of x, m and n after execution of the following statements? Int x, m, n; m=10; n=15; x= ++m + n++; A) x=25, m=10, n=15 B) x=27, m=10, n=15 C) x=26, m=11, n=16 D) x=27, m=11, n=16

Description : What will be the values of x, m and n after execution of the following statements? Int x, m, n; m=10; n=15; x= ++m + n++; A) x=25, m=10, n=15 B) x=27, m=10, n=15 C) x=26, m=11, n=16 D) x=27, m=11, n=16

Last Answer : C) x=26, m=11, n=16

Two persons P and Q invested in a business with 21 lakh and 28 lakh rupees. They agree that 30% of the profit should be in tha ratio 2:3 for P and Q and rest is divided between them according to their investment. If Q got Rs.1200 more than P, then then total profit Q is A) 4350 B) 4567 C) 4467 D) None

Description : Two persons P and Q invested in a business with 21 lakh and 28 lakh rupees. They agree that 30% of the profit should be in tha ratio 2:3 for P and Q and rest is divided between them according to their investment ... got Rs.1200 more than P, then then total profit Q is A) 4350 B) 4567 C) 4467 D) None

Last Answer : Answer: A)  Ratio of profit of P&Q is,  P:Q=21:28 => 3:4  Let total profit gained be X  Since ,30% of profit should be divided in ratio 2:3 for P&Q, Remaining share is =70% of x  P's share =70/100 *x* ...  =1200  X =Rs 7500  Q's total profit =70/100 *7500 *4/7 + 30/100 *7500*3/5  =Rs 4350

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

The normal serum level of Ig G is (A) 1200 mg% (B) 500 mg% (C) 300 mg% (D) 200 mg%

Description : The normal serum level of Ig G is (A) 1200 mg% (B) 500 mg% (C) 300 mg% (D) 200 mg%

Last Answer : Answer : A

The amount of energy required by the children of age between one to three years is: A. 300 K Calories B. 600 K Calories C. 1200 K Calories D. 1500 K Calories

Description : The amount of energy required by the children of age between one to three years is: A. 300 K Calories B. 600 K Calories C. 1200 K Calories D. 1500 K Calories

Last Answer : ANSWER: C