Multiplexing in a time division multiplexer occurs based upon A. the position of a frame within the group of frames B. the positioning of data within a frame C. the priority assigned to a connected device D. the activity of a connected device

Multiplexing in a time division multiplexer occurs based upon
A. the position of a frame within the group of frames
B. the positioning of data within a frame
C. the priority assigned to a connected device
D. the activity of a connected device
by

1 Answer

Answer :

B. the positioning of data within a frame
by

Related questions

Which of the following is oldest multiplexing scheme? A. Frequency Division Multiplexing (FDM) B. Time Division Multiplexing (TDM) C. Code Division Multiplexing (CDM) D. Space Division Multiplexing (SDM)

Description : Which of the following is oldest multiplexing scheme? A. Frequency Division Multiplexing (FDM) B. Time Division Multiplexing (TDM) C. Code Division Multiplexing (CDM) D. Space Division Multiplexing (SDM)

Last Answer : D. Space Division Multiplexing (SDM)

How do you transmit through multiplexing, a thousand of voice channel information over a single fiber optic using on e wavelength? A. Polar division B. Time division C. Fiber division D. Frequency division

Description : How do you transmit through multiplexing, a thousand of voice channel information over a single fiber optic using on e wavelength? A. Polar division B. Time division C. Fiber division D. Frequency division

Last Answer : B. Time division

Used for time division multiplexing. A. Frequency modulation B. Pulsed modulation C. SSB D. Amplitude modulation

Description : Used for time division multiplexing. A. Frequency modulation B. Pulsed modulation C. SSB D. Amplitude modulation

Last Answer : B. Pulsed modulation

A good example of a pilot tone system used in commercial frequency modulation stations. A. FDM B. Time division C. Stereo multiplexing D. Frequency modulation

Description : A good example of a pilot tone system used in commercial frequency modulation stations. A. FDM B. Time division C. Stereo multiplexing D. Frequency modulation

Last Answer : C. Stereo multiplexing

Some of the criteria for calculation of priority of a process are: a. Processor utilization by an individual process. b. Weight assigned to a user or group of users. c. Processor utilization by a user or group of processes. In fair share scheduler, priority is calculated based on: (1) only (a) and (b) (2) only (a) and (c) (3) (a), (b) and (c) (4) only (b) and (c)

Description : Some of the criteria for calculation of priority of a process are: a. Processor utilization by an individual process. b. Weight assigned to a user or group of users. c. Processor utilization by a user or group of processes. In fair share ... (a) and (c) (3) (a), (b) and (c) (4) only (b) and (c)

Last Answer : (3) (a), (b) and (c)

The receive GCE system in an earth station performs what function(s)? A. Modulation and multiplexing B. Up conversion C. Demodulation and demultiplexing D. Down conversion

Description : The receive GCE system in an earth station performs what function(s)? A. Modulation and multiplexing B. Up conversion C. Demodulation and demultiplexing D. Down conversion

Last Answer : C. Demodulation and demultiplexing

How can multiple earth stations share a satellite on the same frequencies? A. Frequency reuse B. Multiplexing C. Mixing D. Frequency hopping

Description : How can multiple earth stations share a satellite on the same frequencies? A. Frequency reuse B. Multiplexing C. Mixing D. Frequency hopping

Last Answer : A. Frequency reuse

What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Description : What circuit is responsible in activating and deactivating adjacent antenna elements in a mobile satellite array? A. Radial divider B. Divider/combiner C. Radial combiner D. Radial multiplexer

Last Answer : A. Radial divider

In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Description : In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Last Answer : C. Nature of multiplexing

Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing

Description : Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing

Last Answer : C. TDM

The process of assigning PCM codes to absolute magnitudes A. Overloading B. All of these C. Quantizing D. Multiplexing

Description : The process of assigning PCM codes to absolute magnitudes A. Overloading B. All of these C. Quantizing D. Multiplexing

Last Answer : C. Quantizing

The device which changes from serial data to parallel data is (A) COUNTER (B) MULTIPLEXER (C) DEMULTIPLEXER (D) FLIP-FLOP

Description : The device which changes from serial data to parallel data is (A) COUNTER (B) MULTIPLEXER (C) DEMULTIPLEXER (D) FLIP-FLOP

Last Answer : Ans: C The device which changes from serial data to parallel data is demultiplexer. (A demultiplexer takes in data from one line and directs it to any of its N outputs depending on the status of the select inputs.)

Using_________each connected device is assigned a time slot whether or not the device has any thing to send. (A) WDM (B) FDM (C) TDM (D) STDM

Description : Using_________each connected device is assigned a time slot whether or not the device has any thing to send. (A) WDM (B) FDM (C) TDM (D) STDM

Last Answer : (C) TDM

TDM stands for: a) Task Division Multiplexing b) Time Division Multiplexing c) Testing Division Multiplexing d) None of These

Description : TDM stands for: a) Task Division Multiplexing b) Time Division Multiplexing c) Testing Division Multiplexing d) None of These

Last Answer : b) Time Division Multiplexing

Mostly ________ is used in wireless LAN. a) time division multiplexing b) orthogonal frequency division multiplexing c) space division multiplexing d) channel division multiplexing

Description : Mostly ________ is used in wireless LAN. a) time division multiplexing b) orthogonal frequency division multiplexing c) space division multiplexing d) channel division multiplexing

Last Answer : b) orthogonal frequency division multiplexing

What is Time Division Multiplexing?

Description : What is Time Division Multiplexing?

Last Answer : Time is divided in division multiplexing so it is know as time division

FDM stands for: a) Frequency Division Multiplexing b) Fidelty Division Multiplexing c) Fast Division Multiplexing d) None of These

Description : FDM stands for: a) Frequency Division Multiplexing b) Fidelty Division Multiplexing c) Fast Division Multiplexing d) None of These

Last Answer : a) Frequency Division Multiplexing

WDM stands for ____________________-division multiplexing.

Description : WDM stands for ____________________-division multiplexing.

Last Answer : Wavelength

DWDM stands for: a. Digital Wavelength-Division Modulation b. Dense Wavelength-Division Modulation c. Double Wavelength-Division Modulation d. Dense Wavelength-Division Multiplexing

Description : DWDM stands for: a. Digital Wavelength-Division Modulation b. Dense Wavelength-Division Modulation c. Double Wavelength-Division Modulation d. Dense Wavelength-Division Multiplexing

Last Answer : d. Dense Wavelength-Division Multiplexing

An FDM hierarchy which is formed by frequency – division multiplexing 10 super groups together for a combined capacity of 600 voice band message channels.

Description : An FDM hierarchy which is formed by frequency – division multiplexing 10 super groups together for a combined capacity of 600 voice band message channels.

Last Answer : Mastergroup

An FDM hierarchy which is formed by frequency – division multiplexing five groups containing 12 channels each for a combined bandwidth of 240 kHz

Description : An FDM hierarchy which is formed by frequency – division multiplexing five groups containing 12 channels each for a combined bandwidth of 240 kHz

Last Answer : Supergroup

How would one squeeze more channels of communication into TDM frames of standard length? A. Shorten the time delay for each channel B. Raise the amplitude C. Add modulators D. Remove the synchronizing pulses

Description : How would one squeeze more channels of communication into TDM frames of standard length? A. Shorten the time delay for each channel B. Raise the amplitude C. Add modulators D. Remove the synchronizing pulses

Last Answer : A. Shorten the time delay for each channel

When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Description : When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Last Answer : D. Antenna resonant frequency increases

Most commercial satellite activity occurs in which band(s)? A. L B. C and Ku C. X D. S and P

Description : Most commercial satellite activity occurs in which band(s)? A. L B. C and Ku C. X D. S and P

Last Answer : B. C and Ku

Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Description : Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Last Answer : B. Circulator

ECE Board Exam March 1996 A device to be connected across the headset in telephone receivers to reduce the effects of acoustic shock. A. Ground B. Two rectifiers in parallel with opposite polarities C. Protector D. Fuse

Description : ECE Board Exam March 1996 A device to be connected across the headset in telephone receivers to reduce the effects of acoustic shock. A. Ground B. Two rectifiers in parallel with opposite polarities C. Protector D. Fuse

Last Answer : B. Two rectifiers in parallel with opposite polarities

Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Description : Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Last Answer : D. Packet mode

Unwanted radio signal on assigned frequency. A. Splatter B. RFI C. Noise D. EMI

Description : Unwanted radio signal on assigned frequency. A. Splatter B. RFI C. Noise D. EMI

Last Answer : C. Noise

A terminal multiplexer has six 1200 bps terminals and ‘n’ 300 bps terminals connected to it. If the outgoing line is 9600 bps, what is the value of n ? (A) 4 (B) 8 (C) 16 (D) 28

Description : A terminal multiplexer has six 1200 bps terminals and ‘n’ 300 bps terminals connected to it. If the outgoing line is 9600 bps, what is the value of n ? (A) 4 (B) 8 (C) 16 (D) 28

Last Answer : (B) 8

A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Description : A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Last Answer : multiplexer

An STS multiplexer is a ______ device. A) one-layer B) two-layer C) three-layer D) four-layer

Description : An STS multiplexer is a ______ device. A) one-layer B) two-layer C) three-layer D) four-layer

Last Answer : two-layer

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Description : A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Last Answer : Ans: B A device which converts BCD to Seven Segment is called DECODER. (A decoder coverts binary words into alphanumeric characters.)

When optical technicians fit eyeglass lenses into plastic eyeglass frames, do they purposely adjust the frame shape in order to fit the lenses in?

Description : When optical technicians fit eyeglass lenses into plastic eyeglass frames, do they purposely adjust the frame shape in order to fit the lenses in?

Last Answer : No. They do not. My guess is that you’re remembering the frames incorrectly.

Css in HTML-frame editor, how to make frames follow one another?

Description : Good evening, how do I make those frames go one after the other as in this picture. I tried to create this, but it doesn't work. Do I do wrong, what am I missing out there? :) p {font-style: ... -align: center; div border-width: 1px; border-style: solid; border-color: blue; float: left; } děkuji :)

Last Answer : we don't see the image, but at least the text (thank God): p {font-style: normal; color: # ffff00; font-size: 13px; text-align: center; div border-width: 1px; border-style: solid; ... wrong / meaninglessly inserted declaration of the tag div: div border-width to div should not be there. (tuxedo)

A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps

Last Answer : b. 2 Mbps

A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Last Answer : a. 2 Mbps

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

determining stresses in frames by methods of sections, the frame is divided into two parts by an imaginary section drawn in such a way as not to cut more than (A) Two members with unknown forces of the frame (B) Three members with unknown forces of the frame (C) Four members with unknown forces of the frame (D) Three members with known forces of the frame

Description : determining stresses in frames by methods of sections, the frame is divided into two parts by an imaginary section drawn in such a way as not to cut more than (A) Two members with unknown forces ... C) Four members with unknown forces of the frame (D) Three members with known forces of the frame

Last Answer : (B) Three members with unknown forces of the frame

A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network ? (A) 2 Mbps (B) 60 Mbps (C) 120 Mbps (D) 10 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network ? (A) 2 Mbps (B) 60 Mbps (C) 120 Mbps (D) 10 Mbps

Last Answer : (A) 2 Mbps Explanation: In data transmission, throughput is the amount of data moved successfully from one place to another in a given period of time, and typically measured in bits per second (bps), ... second (Mbps) or gigabits per second (Gbps). Here, Throughput = 15000 x 8000/60 = 2 Mbps 

A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? (A) 1 Mbps (B) 2 Mbps (C) 10 Mbps (D) 12 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? (A) 1 Mbps (B) 2 Mbps (C) 10 Mbps (D) 12 Mbps

Last Answer : (B) 2 Mbps

ECE Board Exam March 1996 One type of pulse communications system uses pulse that appear as a group, and which vary in number according to the loudness of the voice. This type of pulse modulation is called A. pulse duration modulation B. pulse amplitude modulation C. pulse code modulation D. pulse position modulation

Description : ECE Board Exam March 1996 One type of pulse communications system uses pulse that appear as a group, and which vary in number according to the loudness of the voice. This type of ... A. pulse duration modulation B. pulse amplitude modulation C. pulse code modulation D. pulse position modulation

Last Answer : A. pulse duration modulation

What does GPS stand for? a. Global Portable Service b. Global Positioning System c. General Position Service d. None of the above

Description : What does GPS stand for? a. Global Portable Service b. Global Positioning System c. General Position Service d. None of the above

Last Answer : b. Global Positioning System

To prevent footdrop, the patient is positioned in: a) Order to keep the feet at right angles to the leg When the patient is supine in bed, padded splints or protective boots are used. b) A semi-sitting position in bed Semi-fowlers positioning is used to decrease the pressure of abdominal contents on the diaphragm. c) A sitting position with legs hanging off the side of the bed In order to prevent footdrop, the feet must be supported. d) A side-lying position Side-lying positions do not provide support to prevent footdrop.

Description : To prevent footdrop, the patient is positioned in: a) Order to keep the feet at right angles to the leg When the patient is supine in bed, padded splints or protective boots are used. b) ... must be supported. d) A side-lying position Side-lying positions do not provide support to prevent footdrop.

Last Answer : a) Order to keep the feet at right angles to the leg When the patient is supine in bed, padded splints or protective boots are used.