Description : Match the following. a) Java 1) is a tool for debugging java program b) Javah 2) is a tool for creating C-like header files c) Javap 3) runs java bytecode d) jdb 4) prints java code representation A) a-3, b-2,c-1 B) a-3, b-1, c-4, d-2 C) a-1, b-2, c-3, d-4 D) a-2, b-1, c-3, d-4
Last Answer : B) a-3, b-1, c-4, d-2
Description : The jdb is used to A) Create a jar archive B) Debug a java program C) Create C header file D) Generate java documentation
Last Answer : B) Debug a java program
Description : Which of the following is true about Java. A) Java does not support overloading. B) Java has replaced the destructor function of C++ C) There are no header files in Java. D) All of the above.
Last Answer : D) All of the above
Description : Which of the following cannot be passed to a function? A) Reference variable B) Arrays C) Class objects D) Header files
Last Answer : D) Header files
Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii ... and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v
Last Answer : D) All i, ii, iii, iv and v
Description : In ………………. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B
Last Answer : D) Both A and B
Description : The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above
Description : In IPv4 header, the field is needed to allow the destination host to determine which datagram a newly arrived fragment belongs to. (A) identification (B) fragment offset (C) time to live (D) header checksum
Last Answer : (A) identification
Description : Which of the following control fields in TCP header is used to specify the sender has no more data to transmit? (A) FIN (B) RST (C) SYN (D) PSH
Last Answer : (A) FIN
Description : In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes
Last Answer : (4) 5 bytes
Description : The maximum size of the data that the application layer can pass on to the TCP layer below is ......... (1) 216 bytes (2) 216 bytes + TCP header length (3) 216 bytes - TCP header length (4) 215 bytes
Last Answer : Answer: Marks to all
Description : Which of the following cannot be passed to a function in C++? (1) Constant (2) Structure (3) Array (4) Header file
Last Answer : Answer: 4
Description : Why is North sentinel island dangerous?
Last Answer : What is the answer ?
Description : I had my right breast and the sentinel node removed after a byopsy removed a mammory glad with cancer. The pathology report of the breast and node showed no cancer cells. I have some family cancer hist and my dr wants me to take chemo and I dont want to?
Last Answer : You go to an expert, assuming.... I go to SCCA in seattle. If they recommend something, I think you should do it. I have been a nurse for over 35 years... and have known people who did ... advice.. and go for several opinions. I am in chemo now and feel reassured my treatment will extend my life.
Description : In ……………, search start at the beginning of the list and check every element in the list. A) Linear search B) Binary search C) Hash Search D) Binary Tree search
Last Answer : A) Linear search
Description : To add a new element to a list we use which command ? a) list1.add(5) b) list1.append(5) c) list1.addLast(5) d) list1.addEnd(5)
Last Answer : a) list1.add(5)
Description : Consider an implementation of unsorted single linked list. Suppose it has its representation with a head and a tail pointer (i.e. pointers to the first and last nodes of the linked list). Given the ... the front node of the linked list. (D) Deletion of the last node of the linked list.
Last Answer : (D) Deletion of the last node of the linked list.
Description : In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps
Last Answer : (C) 1000 bps
Description : Does anyone know of a way to hide bobble head Jelly Ken in the header here?
Last Answer : Click on the mobile button at the bottom of the site. That’s the only way to run from him.
Description : If an integer occupies 4 bytes and a character occupies 1 byte of memory, each element of the following structure would occupy how many bytes ? struct name { int age; char name[30]; }; A) 30 B) 32 C) 34 D) 36
Last Answer : C) 34
Description : Is the following piece of code valid? >>> a=(1,2,3,4) >>> del a a) No because tuple is immutable b) Yes, first element in the tuple is deleted c) Yes, the entire tuple is deleted
Last Answer : c) Yes, the entire tuple is deleted
Description : A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one ... ) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2
Last Answer : (C) both s1 and s2
Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above
Last Answer : (B) 3 bits/baud
Description : In XML we can specify the frequency of an element by using the symbols: (A) + * ! (B) # * ! (C) + * ? (D) - * ?
Last Answer : (C) + * ?
Description : The seven elements A, B, C, D, E, F and G are pushed onto a stack in reverse order, i.e., starting from G. The stack is popped five times and each element is inserted into a queue. Two elements are deleted from the queue and pushed ... The popped item is ................... (1) A (2) B (3) F (4) G
Last Answer : Answer: 2
Description : Which of the following is true for computation time in insertion, deletion and finding maximum and minimum element in a sorted array? (1) Insertion-O(1), Deletion-O(1), Maximum-O(1), Minimum-O(1) (2) Insertion-O(1), ... (1), Minimum-O(1) (4) Insertion-O(n), Deletion-O(n), Maximum-O(n), Minimum-O(n)
Last Answer : Answer: 3
Description : Which command is used to display the top of the file? A. cat B. head C. more D. grep E. None of the above
Last Answer : B. head
Description : ............... is a standalone tag. A) B) C) D)
Last Answer : A)
Description : Consider the following UNIX command: sort temp; head -30
Last Answer : (C) Sort, taking the input from "in" and writing the output to "temp" then prints 30 lines from temp on terminal. Finally "temp" is removed.
Description : Assuming that the disk head is located initially at 32, find the number of disk moves required with FCFS if the disk queue of I/O block requests are 98, 37, 14, 124, 65, 67: (A) 310 (B) 324 (C) 320 (D) 321
Last Answer : (D) 321
Description : Consider a disk queue with request for input/output to block on cylinders 98, 183, 37, 122, 14, 124, 65, 67 in that order. Assume that disk head is initially positioned at cylinder 53 and moving ... and 252 cylinders (B) 640 and 236 cylinders (C) 235 and 640 cylinders (D) 235 and 252 cylinders
Last Answer : Answer: 236 and 208 cylinders Explanation: SSTF Initial head position =53 The closest queue to initial head position=65 head moves from 53 to 65=12 head moves from 65 to 67=2 head moves from 67 ... 122=24 head moves from 122 to 124=2 head moves from 124 to 183=59 Total head movement=208
Description : ...............tag is an extension to HTML that can enclose any number of Javascript statements. (A)< SCRIPT> (B)< BODY> (C)< HEAD> (D)
Last Answer : Answer: A
Description : If the Disk head is located initially at track 32, find the number of disk moves required with FCFS scheduling criteria if the disk queue of I/O blocks requests are: 98, 37, 14, 124, 65, 67 (A) 320 (B) 322 (C) 321 (D) 319
Last Answer : (C) 321
Description : Unix command to change the case of first three lines of file “shortlist” from lower to upper (1) $ tr ‘[a-z]’ ‘[A-Z]’ shortlist | head-3 (2) $ head-3 shortlist | tr ‘[a-z]’ ‘[A-Z]’ (3) $ tr head-3 shortlist ‘[A-Z]’ ‘[a-z]’ (4) $ tr shortlist head-3 ‘[a-z]’ ‘[A-Z]’
Last Answer : (2) $ head-3 shortlist | tr ‘[a-z]’ ‘[A-Z]’
Description : Consider a disk queue with I/O requests on the following cylinders in their arriving order: 6,10,12,54,97,73,128,15,44,110,34,45 The disk head is assumed to be at cylinder 23 and moving in the direction ... . The disk head movement using SCAN-scheduling algorithm is: (1) 172 (2) 173 (3) 227 (4) 228
Last Answer : (2) 173
Description : Data items grouped together for storage purposes are called a A) record B) title C) list D) string
Last Answer : A) record
Description : List some of the most used File Processing functions in C?
Last Answer : Ans: Most used file processing functions in C are- fopen()-used to open a file and set the file pointer to the beginning or end of a File. fclose()-used to close an active File. getc()-used ... used to write data to a File. rewind()-used to move the file pointer to the beginning of a File.
Description : Which of the following commands is used to list contents of directories? A. ls B. lp C. dir D. tar E. None of the above
Last Answer : A. ls
Description : In C++, the keyword void was used ……….. A) To specify the return type of function when it is not returning any value. B) To indicate an empty argument list to a function. C) To declare the generic pointers. D) All of the above.
Last Answer : D) All of the above.
Description : Which of the following statement is true? i) Using singly linked lists and circular list, it is not possible to traverse the list backwards. ii) To find the predecessor, it is required to traverse the list from the first ... linked list. A) i-only B) ii-only C) Both i and ii D) None of both
Last Answer : C) Both i and ii
Description : ………………. is not an operation performed on linear list Get More Mcqs from http://www.siteforinfotech.com/p/mcqs.html a) Insertion b) Deletion c) Retrieval d) Traversal A) only a,b and c B) only a and b C) All of the above D) None of the above
Last Answer : D) None of the above
Description : ………… is very useful in situation when data have to stored and then retrieved in reverse order. A) Stack B) Queue C) List D) Link list
Last Answer : A) Stack
Description : ……………. Is a pile in which items are added at one end and removed from the other. A) Stack B) Queue C) List D) None of the above
Last Answer : B) Queue
Description : Which of the syntax is correct for insert statement? i) insert into values ii) insert into (column list) values A) i-only B) ii-only C) Both of them D) None of them
Last Answer : C) Both of them
Description : Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv
Last Answer : C) ii, iii and iv only
Description : Which of the following algorithm pays the least attention to the ordering of the elements in the input list? a) Insertion sort b) Selection sort c) Quick sort d) None
Last Answer : b) Selection sort
Description : What will be the output? d = {"john":40, "peter":45} print(list(d.keys())) a) [“john”, “peter”]. b) [“john”:40, “peter”:45]. c) (“john”, “peter”) d) (“john”:40, “peter”:45)
Last Answer : a) [“john”, “peter”].
Description : What type of data is: a=[(1,1),(2,4),(3,9)]? a) Array of tuples b) List of tuples c) Tuples of lists d) Invalid type
Last Answer : b) List of tuples
Description : What is the data type of (1)? a) Tuple b) Integer c) List d) Both tuple and integer
Last Answer : b) Integer
Description : To shuffle the list(say list1) what function do we use ? a) list1.shuffle () b) shuffle(list1) c) random.shuffle(list1) d) random.shuffleList(list1)
Last Answer : c) random.shuffle(list1)