Which of the following control fields in TCP header is used to specify the sender has no more data to transmit? (A) FIN (B) RST (C) SYN (D) PSH

Which of the following control fields in TCP header is used to specify the sender has no more data to transmit? (A) FIN (B) RST (C) SYN (D) PSH
by

1 Answer

Answer :

(A) FIN 
by

Related questions

The maximum size of the data that the application layer can pass on to the TCP layer below is ......... (1) 216 bytes (2) 216 bytes + TCP header length (3) 216 bytes - TCP header length (4) 215 bytes

Description : The maximum size of the data that the application layer can pass on to the TCP layer below is ......... (1) 216 bytes (2) 216 bytes + TCP header length (3) 216 bytes - TCP header length (4) 215 bytes

Last Answer : Answer: Marks to all

In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Description : In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Last Answer : (4) 5 bytes 

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii ... and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

Which Nmap scan is does not completely open a TCP connection? A. SYN stealth scan B. TCP scan C. XMAS tree scan D. ACK scan

Description : Which Nmap scan is does not completely open a TCP connection? A. SYN stealth scan B. TCP scan C. XMAS tree scan D. ACK scan

Last Answer : A. SYN stealth scan

The RST 7 instruction in 8085 microprocessor is equivalent to: (A) CALL 0010 H (B) CALL 0034 H (C) CALL 0038 H (D) CALL 003C H

Description : The RST 7 instruction in 8085 microprocessor is equivalent to: (A) CALL 0010 H (B) CALL 0034 H (C) CALL 0038 H (D) CALL 003C H

Last Answer : (C) CALL 0038 H

Which of the following 8085 microprocessor hardware interrupt has the lowest priority? (A) RST 6.5 (B) RST 7.5 (C) TRAP (D) INTR

Description : Which of the following 8085 microprocessor hardware interrupt has the lowest priority? (A) RST 6.5 (B) RST 7.5 (C) TRAP (D) INTR 

Last Answer : Answer: D

What is the maximum size of data that the application layer can pass on to the TCP layer below? a. Any size b. 216 bytes - size of TCP header c. 216 bytes d. 1500

Description : What is the maximum size of data that the application layer can pass on to the TCP layer below? a. Any size b. 216 bytes - size of TCP header c. 216 bytes d. 1500

Last Answer : a. Any size

In distributed databases, location transparency allows for database users, programmers and administrators to treat the data as if it is at one location. A SQL query with location transparency needs to specify: (A) Inheritances (B) Fragments (C) Locations (D) Local formats

Description : In distributed databases, location transparency allows for database users, programmers and administrators to treat the data as if it is at one location. A SQL query with location transparency needs to specify: (A) Inheritances (B) Fragments (C) Locations (D) Local formats 

Last Answer : (B) Fragments

In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps

Description : In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps

Last Answer : (C) 1000 bps 

Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching

Description : Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching

Last Answer : (D) Circuit Switching

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : the IP address of therouter found inthe routing table

f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : hedestination IP address in the datagram header

In the SMTP header field_____ is a summary of the message being sent which is specified by the sender. a. Reply-to b. Return-path c. Subject d. From

Description : In the SMTP header field_____ is a summary of the message being sent which is specified by the sender. a. Reply-to b. Return-path c. Subject d. From

Last Answer : c. Subject

Which of the following is true about Java. A) Java does not support overloading. B) Java has replaced the destructor function of C++ C) There are no header files in Java. D) All of the above.

Description : Which of the following is true about Java. A) Java does not support overloading. B) Java has replaced the destructor function of C++ C) There are no header files in Java. D) All of the above.

Last Answer : D) All of the above

Which of the following is not a field in TCP header? a. Sequence number b. Fragment offset c. Checksum d. Window size

Description : Which of the following is not a field in TCP header? a. Sequence number b. Fragment offset c. Checksum d. Window size

Last Answer : b. Fragment offset

In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Description : In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Last Answer : d. Destination port number

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

State the use of 6 flags in TCP header.

Description : State the use of 6 flags in TCP header.

Last Answer : There are 6, 1-bit control bits that control connection establishment, termination, abortion, flow control etc.. 1) URG: Urgent pointer If this bit field is set the receiving TCP should ... 6) FIN: No more data from sender. If this bit is set then it terminates the connection.

System.in.read() is being used, the program must specify the .................. clause. A) throws.java.out.IOException B) throws.java.in.IOException C) throws.java.io.IOException D) throws.java.io.InException

Description : System.in.read() is being used, the program must specify the .................. clause. A) throws.java.out.IOException B) throws.java.in.IOException C) throws.java.io.IOException D) throws.java.io.InException

Last Answer : C) throws.java.io.IOException

In C++, the keyword void was used ……….. A) To specify the return type of function when it is not returning any value. B) To indicate an empty argument list to a function. C) To declare the generic pointers. D) All of the above.

Description : In C++, the keyword void was used ……….. A) To specify the return type of function when it is not returning any value. B) To indicate an empty argument list to a function. C) To declare the generic pointers. D) All of the above.

Last Answer : D) All of the above.

In XML we can specify the frequency of an element by using the symbols: (A) + * ! (B) # * ! (C) + * ? (D) - * ?

Description : In XML we can specify the frequency of an element by using the symbols: (A) + * ! (B) # * ! (C) + * ? (D) - * ?

Last Answer : (C) + * ?

Which of the following statements is not correct? (A) HTML is not screen precise formatting language. (B) HTML does not specify a logic. (C) DHTML is used for developing highly interactive web pages. (D) HTML is a programming language.

Description : Which of the following statements is not correct? (A) HTML is not screen precise formatting language. (B) HTML does not specify a logic. (C) DHTML is used for developing highly interactive web pages. (D) HTML is a programming language.

Last Answer : (D) HTML is a programming language.

………… enable us to hide, inside the object, both the data fields and the methods that act on that data. A) Encapsulation B) Polymorphism C) Inheritance D) Overloading

Description : ………… enable us to hide, inside the object, both the data fields and the methods that act on that data. A) Encapsulation B) Polymorphism C) Inheritance D) Overloading

Last Answer : A) Encapsulation

The relational model is based on the concept that data is organized and stored in two-dimensional tables called ………………………A) Fields B) Records C) Relations D) Keys

Description : The relational model is based on the concept that data is organized and stored in two-dimensional tables called ………………………A) Fields B) Records C) Relations D) Keys

Last Answer : C) Relations

Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue may be complex structures that are ordered on one or several fields. Which of the following is correct? (A) Both S1 and S2 are incorrect. (B) S1 is correct and S2 is incorrect. (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Description : Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue ... . (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Last Answer : (D) Both S1 and S2 are correct.

In SMTP mail transaction flow, the sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ………. a. 220 service ready message b. 421 service not available message c. Both of the above d. None of the above

Description : In SMTP mail transaction flow, the sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ………. a. 220 service ready message b. 421 service not available message c. Both of the above d. None of the above

Last Answer : c. Both of the above

The Post Office Protocol is an ………... protocol with both client (sender/receiver) and …………...functions A. electronic mail, server (storage) B. three layer , server C. UDP, transfer D. TCP, server

Description : The Post Office Protocol is an ………... protocol with both client (sender/receiver) and …………...functions A. electronic mail, server (storage) B. three layer , server C. UDP, transfer D. TCP, server

Last Answer : A. electronic mail, server (storage)

The sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ____ Service ready message.. A. 420 B. 320 C. 220 D. 120

Description : The sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ____ Service ready message.. A. 420 B. 320 C. 220 D. 120

Last Answer : C. 220

specify where to get the source and destination operands for the operation specified by the a. Operand fields and opcode b. Opcode and operand c. Source and destination d. Cpu and memory

Description : specify where to get the source and destination operands for the operation specified by the a. Operand fields and opcode b. Opcode and operand c. Source and destination d. Cpu and memory

Last Answer : a. Operand fields and opcode

Match the following. a) Java 1) is a tool for debugging java program b) Javah 2) is a tool for creating C-like header files c) Javap 3) runs java bytecode d) jdb 4) prints java code representation A) a-3, b-2,c-1 B) a-3, b-1, c-4, d-2 C) a-1, b-2, c-3, d-4 D) a-2, b-1, c-3, d-4

Description : Match the following. a) Java 1) is a tool for debugging java program b) Javah 2) is a tool for creating C-like header files c) Javap 3) runs java bytecode d) jdb 4) prints java code representation A) a-3, b-2,c-1 B) a-3, b-1, c-4, d-2 C) a-1, b-2, c-3, d-4 D) a-2, b-1, c-3, d-4

Last Answer : B) a-3, b-1, c-4, d-2

The jdb is used to A) Create a jar archive B) Debug a java program C) Create C header file D) Generate java documentation

Description : The jdb is used to A) Create a jar archive B) Debug a java program C) Create C header file D) Generate java documentation

Last Answer : B) Debug a java program

Which of the following cannot be passed to a function? A) Reference variable B) Arrays C) Class objects D) Header files

Description : Which of the following cannot be passed to a function? A) Reference variable B) Arrays C) Class objects D) Header files

Last Answer : D) Header files

There is an extra element at the head of the list called a ………. A) Antinel B) Sentinel C) List header D) List head

Description : There is an extra element at the head of the list called a ………. A) Antinel B) Sentinel C) List header D) List head

Last Answer : B) Sentinel

In ………………. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Description : In ………………. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Last Answer : D) Both A and B

The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Description : The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Last Answer : D) All of the above

In IPv4 header, the field is needed to allow the destination host to determine which datagram a newly arrived fragment belongs to. (A) identification (B) fragment offset (C) time to live (D) header checksum

Description : In IPv4 header, the field is needed to allow the destination host to determine which datagram a newly arrived fragment belongs to. (A) identification (B) fragment offset (C) time to live (D) header checksum

Last Answer : (A) identification

Which of the following cannot be passed to a function in C++? (1) Constant (2) Structure (3) Array (4) Header file

Description : Which of the following cannot be passed to a function in C++? (1) Constant (2) Structure (3) Array (4) Header file

Last Answer : Answer: 4

An attacker sits between the sender and receiver and captures the information and retransmits to the receiver after some time without altering the information. This attack is called as .............. (A) Denial of service attack (B) Masquarade attack (C) Simple attack (D) Complex attack

Description : An attacker sits between the sender and receiver and captures the information and retransmits to the receiver after some time without altering the information. This attack is called as .............. (A) Denial of service attack (B) Masquarade attack (C) Simple attack (D) Complex attack

Last Answer : (A) Denial of service attack 

Which one of the following fields of an IP header is NOT modified by a typical IP router? a. Checksum b. Source address c. Time to Live (TTL) d. Length

Description : Which one of the following fields of an IP header is NOT modified by a typical IP router? a. Checksum b. Source address c. Time to Live (TTL) d. Length

Last Answer : b. Source address

State weather the following statement is true or false for Multipurpose Internet Mail Extensions 1).The general syntax for MIME header fields is not the same as that for RFC 2822. 2).MIME header field names are never significant, but the cases of field values can b. 3). A MIME-compliant message must contain a header field with the following verbatim text: MIME-Version: 1.0 A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for Multipurpose Internet Mail Extensions 1).The general syntax for MIME header fields is not the same as that for RFC 2822. 2).MIME header field names are never ... false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : A. 1. True, 2. true, 3. true

What are the different fields in pseudo header?

Description : What are the different fields in pseudo header?

Last Answer : ∙ Protocol number ∙ Source IP address ∙ Destination IP addresses.

An image is 1024∗800 pixels with 3 bytes/pixel. Assume the image is uncompressed. How long does it take to transmit it over a 10-Mbps Ethernet ? (A) 196.6 seconds (B) 19.66 seconds (C) 1.966 seconds (D) 0.1966 seconds

Description : An image is 1024∗800 pixels with 3 bytes/pixel. Assume the image is uncompressed. How long does it take to transmit it over a 10-Mbps Ethernet ? (A) 196.6 seconds (B) 19.66 seconds (C) 1.966 seconds (D) 0.1966 seconds

Last Answer : (C) 1.966 seconds

A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Description : A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Last Answer : (B) 0.184

A node X on a 10 Mbps network is regulated by a token bucket. The token bucket is filled at a rate of 2 Mbps. Token bucket is initially filled with 16 megabits. The maximum duration taken by X to transmit at full rate of 10 Mbps is ............ secs. (1) 1 (2) 2 (3) 3 (4) 4

Description : A node X on a 10 Mbps network is regulated by a token bucket. The token bucket is filled at a rate of 2 Mbps. Token bucket is initially filled with 16 megabits. The maximum duration taken by X to transmit at full rate of 10 Mbps is ............ secs. (1) 1 (2) 2 (3) 3 (4) 4

Last Answer : (2) 2 

Station A uses 32 byte packets to transmit messages to station B using sliding window protocol. The round trip delay between A and B is 40 milli seconds and the bottleneck bandwidth on the path between A and B is 64 kbps. The optimal window size of A is (1) 20 (2) 10 (3) 30 (4) 40

Description : Station A uses 32 byte packets to transmit messages to station B using sliding window protocol. The round trip delay between A and B is 40 milli seconds and the bottleneck bandwidth on the path between A and B is 64 kbps. The optimal window size of A is (1) 20 (2) 10 (3) 30 (4) 40

Last Answer : (2) 10

Suppose there are n stations in a slotted LAN. Each station attempts to transmit with a probability P in each time slot. The probability that only one station transmits in a given slot is .................. (1) nP(1-P)n-1 (2) nP (3) P(1-P)n-1 (4) nP(1-P)n-1

Description : Suppose there are n stations in a slotted LAN. Each station attempts to transmit with a probability P in each time slot. The probability that only one station transmits in a given slot is .................. (1) nP(1-P)n-1 (2) nP (3) P(1-P)n-1 (4) nP(1-P)n-1

Last Answer :  nP(1-P)n-1