Increasing which of the following factors will decrease the density of a radiograph: A. Milliampere B. Time C. KvP Kilovoltage D. Object-film distance E. Focal spot-object distance

Increasing which of the following factors will decrease the density of a radiograph:
A. Milliampere
B. Time
C. KvP Kilovoltage
D. Object-film distance
E. Focal spot-object distance
by

1 Answer

Answer :

E. Focal spot-object distance
by

Related questions

Exposure of the patient to ionising radiation when taking a radiograph is NOT REDUCED by: A. The use of fast film B. The addition of filtration C. Collimation of the beam D. The use of an open and lead lined cone E. Decreasing the kilovoltage KvP

Description : Exposure of the patient to ionising radiation when taking a radiograph is NOT REDUCED by: A. The use of fast film B. The addition of filtration C. Collimation of the beam D. The use of an open and lead lined cone E. Decreasing the kilovoltage KvP

Last Answer : E. Decreasing the kilovoltage KvP

Which of the following will increase sharpness: A. Larger focal spot B. Smaller focal spot C. Increase object-film distance

Description : Which of the following will increase sharpness: A. Larger focal spot B. Smaller focal spot C. Increase object-film distance

Last Answer : B. Smaller focal spot

If the focal spot to film distance is increased from 20cm to 40cm, the intensity of radiation is reduced by: a. ½ b. ¼ . c. 1/3 d. 1/5

Description : If the focal spot to film distance is increased from 20cm to 40cm, the intensity of radiation is reduced by: a. ½ b. ¼ . c. 1/3 d. 1/5

Last Answer : b. ¼ .

If the focal spot to film distance is increased from 20cm to 40cm, the intensity of radiation is reduced by: A. ½ B. ¼ C. 1/3 D. 1/5

Description : If the focal spot to film distance is increased from 20cm to 40cm, the intensity of radiation is reduced by: A. ½ B. ¼ C. 1/3 D. 1/5

Last Answer : B. ¼

When is it acceptable for the patient to hold radiographic film packet in the patient’s mouth: A. Patient is very young and cannot understand direction B. Patient is physically handicapped and unable to hold the film C. Film should never be held by the dentist D. There is a lack of time and radiograph is essential

Description : When is it acceptable for the patient to hold radiographic film packet in the patient's mouth: A. Patient is very young and cannot understand direction B. Patient is physically handicapped and unable to ... never be held by the dentist D. There is a lack of time and radiograph is essential

Last Answer : C. Film should never be held by the dentist

Density of film is decreased by increasing the : A. MA B. Exposure time C. Developing time D. Rinsing time

Description : Density of film is decreased by increasing the : A. MA B. Exposure time C. Developing time D. Rinsing time

Last Answer : B. Exposure time

The best method to take X-ray of the maxillary sinus is, A. Periapical radiograph B. Panoramic view C. Lateral cephaloghraph D. Occipitomental view E. Reverse Towne’s view

Description : The best method to take X-ray of the maxillary sinus is, A. Periapical radiograph B. Panoramic view C. Lateral cephaloghraph D. Occipitomental view E. Reverse Towne’s view

Last Answer : D. Occipitomental view

How can a periodontal pocket be recognised:** A. X-Ray B. Periodontal probe / Calibrated probe C. Periodontal marker D. Bitewing radiograph E. Sharp explorer F. Study cast

Description : How can a periodontal pocket be recognised:** A. X-Ray B. Periodontal probe / Calibrated probe C. Periodontal marker D. Bitewing radiograph E. Sharp explorer F. Study cast

Last Answer : B. Periodontal probe / Calibrated probe

A cusp fracture immediate to Class II inlay can be BEST detected by, A. History B. Visually C. Radiograph D. Percussion E. Touching the tip of the cusp / Pressure on the cusp/

Description : A cusp fracture immediate to Class II inlay can be BEST detected by, A. History B. Visually C. Radiograph D. Percussion E. Touching the tip of the cusp / Pressure on the cusp/

Last Answer : E. Touching the tip of the cusp / Pressure on the cusp/

In testing for mobility, which of the following statement is true:** M07 A. Heavy pressure must sometimes be used to test mobility B. Only lateral mobility is significant in diagnosis and treatment of chronic inflammatory periodontal disease C. Hyper mobility indicates that the tooth supporting structures have been weakened D. During the periodontal examination each tooth should be tested individually for hyper mobility E. Reliance on radiograph is essential

Description : In testing for mobility, which of the following statement is true:** M07 A. Heavy pressure must sometimes be used to test mobility B. Only lateral mobility is significant in ... examination each tooth should be tested individually for hyper mobility E. Reliance on radiograph is essential

Last Answer : D. During the periodontal examination each tooth should be tested individually for hyper mobility

cyst at the apex of an upper central incisor measuring 1 cm in diameter is visualized in radiograph and confirmed by aspiration biopsy; which method of treatment would you consider?** A. Extraction of the central incisor and retrieving the cyst through the socket B. Exteriorizing the cyst through the buccal bone and mucosa C. Making a mucoperiosteal flap and removing the cyst through an opening made in the alveolar bone, followed by tooth removal. D. Making a mucoperiosteal flap and removing the cyst through an opening made in the alveolar bone, followed by endodontic treatment. E. Routine orthograde endodontic treatment followed by observation.

Description : cyst at the apex of an upper central incisor measuring 1 cm in diameter is visualized in radiograph and confirmed by aspiration biopsy; which method of treatment would you consider?** ... bone, followed by endodontic treatment. E. Routine orthograde endodontic treatment followed by observation.

Last Answer : D. Making a mucoperiosteal flap and removing the cyst through an opening made in the alveolar bone, followed by endodontic treatment.

On X-ray, the buccal roots of 16 is considerably elongated; this is a result of, A. Too great vertical angulation B. Inadequate vertical angulation C. Excessive object film distance

Description : On X-ray, the buccal roots of 16 is considerably elongated; this is a result of, A. Too great vertical angulation B. Inadequate vertical angulation C. Excessive object film distance

Last Answer : B. Inadequate vertical angulation

Two central incisors on a radiograph are showing with what looks like eye drop radiolucency. You decided to start endodontic treatment on these teeth but when you tried to open access to the root canal you find clearly closed orifices with what look like secondary dentine. What is your initial management? A. Leave as it and start a permanent restoration. B. Start systemic antibiotic C. Try to ream and file canals

Description : Two central incisors on a radiograph are showing with what looks like eye drop radiolucency. You decided to start endodontic treatment on these teeth but when you tried to open access to the root ... and start a permanent restoration. B. Start systemic antibiotic C. Try to ream and file canals

Last Answer : C. Try to ream and file canals

The best radiograph for maxillary sinus is: A. PA skull x ray B. Occipitomental radiograph o waters view C. Town’s view The best radiograph for maxillary sinus is: A. PA skull x ray B. Occipitomental radiograph o waters view C. Town’s view

Description : The best radiograph for maxillary sinus is: A. PA skull x ray B. Occipitomental radiograph o waters view C. Town’s view

Last Answer : B. Occipitomental radiograph o waters view

Absence of clearly defined crystal lamina dura is because: A. Pathognomonic of periodontal disease B. Indicative of attachment loss C. Associated with periodontal pocket D. Commonly related to radiograph angulation

Description : Absence of clearly defined crystal lamina dura is because: A. Pathognomonic of periodontal disease B. Indicative of attachment loss C. Associated with periodontal pocket D. Commonly related to radiograph angulation

Last Answer : D. Commonly related to radiograph angulation

When the incisive foramen is superimposed over the apex on a radiograph it may be mistaken to be a: A. Cyst B. Cementoma C. Odontoma

Description : When the incisive foramen is superimposed over the apex on a radiograph it may be mistaken to be a: A. Cyst B. Cementoma C. Odontoma

Last Answer : A. Cyst

The inverse Square Law is concerned with intensity of radiation using type D film of 200mm target to film distance, the exposure time was 0.25s. What would be the exposure for the same situation with 400mm target to film distance? M07********** A. 0.5s B. 1.0s C. 2.0s D. 0.25s E. 0.125s

Description : The inverse Square Law is concerned with intensity of radiation using type D film of 200mm target to film distance, the exposure time was 0.25s. What would be the exposure for the same situation with 400mm target to film distance? M07********** A. 0.5s B. 1.0s C. 2.0s D. 0.25s E. 0.125s

Last Answer : B. 1.0s

An object located four focal lengths in front of a thin, converging lens is moved to within two focal lengths of the lens. As a result, does the size of the image produced by the lens increase, decrease or remain the same?

Description : An object located four focal lengths in front of a thin, converging lens is moved to within two focal lengths of the lens. As a result, does the size of the image produced by the lens increase, decrease or remain the same?

Last Answer : ANSWER: INCREASE

15. An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object is formed on the screen. What is the focal length of the conve -Chemistry-10

Description : 15. An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object is formed on the screen. What is the focal length of the conve -Chemistry-10

Last Answer : Since, object-screen distance is double of object-lens separation, the object is at a distance of 2f from the lens and the image should be of the same size of the object.

14. An object 2 cm in size is placed 30 cm in front of a concave mirror of focal length 15 cm. At what distance from the mirror should a screen be placed in order to obtain a sharp image? What will be the nature and the size of the -Chemistry-10

Description : 14. An object 2 cm in size is placed 30 cm in front of a concave mirror of focal length 15 cm. At what distance from the mirror should a screen be placed in order to obtain a sharp image? What will be the nature and the size of the -Chemistry-10

Last Answer : Answer. hope this helps you

2. An object 50 cm tall is placed on the principal axis of a convex lens. Its 20 cm tall image is formed on the screen placed at a distance of 10 cm from the lens. Calculate the focal length of the lens. [All India] -Chemistry-10

Description : 2. An object 50 cm tall is placed on the principal axis of a convex lens. Its 20 cm tall image is formed on the screen placed at a distance of 10 cm from the lens. Calculate the focal length of the lens. [All India] -Chemistry-10

Last Answer : this is the answer for the respected question

1. A concave lens has focal length of 20 cm. At what distance from the lens a 5 cm tall object be placed so that it forms an image at 15 cm from the lens? Also calculate the size of the image formed. [Delhi] -Chemistry-10

Description : 1. A concave lens has focal length of 20 cm. At what distance from the lens a 5 cm tall object be placed so that it forms an image at 15 cm from the lens? Also calculate the size of the image formed. [Delhi] -Chemistry-10

Last Answer : Answer. hope this helps youu

15. An object of size 7.0 cm is placed at 27 cm in front of a concave mirror of focal length 18 cm. At what distance from the mirror should a screen be placed so that a sharply focused image can be obtained? Find the size and nature of the image. -Physics-10

Description : 15. An object of size 7.0 cm is placed at 27 cm in front of a concave mirror of focal length 18 cm. At what distance from the mirror should a screen be placed so that a sharply focused image can be obtained? Find the size and nature of the image. -Physics-10

Last Answer : Object distance (u) = – 27 cm Object height (h) = 7 cm Focal length (f) = – 18 cm According to the mirror formula, The negative value of image height indicates that the image formed is inverted.

12. An object is placed at a distance of 10 cm from a convex mirror of focal length 15 cm. Find the position and nature of the image. -Physics-10

Description : 12. An object is placed at a distance of 10 cm from a convex mirror of focal length 15 cm. Find the position and nature of the image. -Physics-10

Last Answer : Focal length of convex mirror (f) = +15 cm Object distance (u) = - 10 cm According to the mirror formula, The image is located at a distance of 6 cm from the mirror on the other ... and a value of less than 1 of magnification indicates that the image formed is virtual and erect and diminished.

We wish to obtain an erect image of an object, using a concave mirror of focal length 15 cm. What should be the range of distance of the object from the mirror? -Physics-10

Description : We wish to obtain an erect image of an object, using a concave mirror of focal length 15 cm. What should be the range of distance of the object from the mirror? -Physics-10

Last Answer : Range of the distance of the object = 0 to 15 cm from the pole of the mirror. Nature of the image = virtual, erect, and larger than the object.

A convex lens has a focal length of 10 cm. At what distance from the lens should the object be placed so that it forms a real and inverted image 20 cm away from the lens? What would be the size of the image formed if the object is 2 cm high? With the help of a ray diagram show the formation of the image by the lens in this case. -Physics

Description : A convex lens has a focal length of 10 cm. At what distance from the lens should the object be placed so that it forms a real and inverted image 20 cm away from the lens? What would be the size of ... ? With the help of a ray diagram show the formation of the image by the lens in this case. -Physics

Last Answer : This is the Answe:

An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object is formed on the screen. What is the focal length of the convex lens and size of the image formed on the screen? Draw a ray diagram to show the formation of the image in this position of the object with respect to the lens. -Physics

Description : An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object ... diagram to show the formation of the image in this position of the object with respect to the lens. -Physics

Last Answer : Since, object-screen distance is double of object-lens separation, the object is at a distance of 2f from the lens and the image should be of the same size of the object.

An object 50 cm tall is placed on the principal axis of a convex lens. Its 20 cm tall image is formed on the screen placed at a distance of 10 cm from the lens. Calculate the focal length of the lens. -Physics

Description : An object 50 cm tall is placed on the principal axis of a convex lens. Its 20 cm tall image is formed on the screen placed at a distance of 10 cm from the lens. Calculate the focal length of the lens. -Physics

Last Answer : The focal length' of convex length is 7.14 cm. Solution: The given quantities are Height of the object h = 50 cm Height of the image formed h' = -20 cm Image distance v = 10 cm The image ... object distance will be So the focal length will be Thus the focal length of the convex lens is 7.14 cm

A concave lens has focal length of 20 cm. At what distance from the lens a 5 cm tall object be placed so that it forms an image at 15 cm from the lens? Also calculate the size of the image formed. -Physics

Description : A concave lens has focal length of 20 cm. At what distance from the lens a 5 cm tall object be placed so that it forms an image at 15 cm from the lens? Also calculate the size of the image formed. -Physics

Last Answer : Answer. I hope it helped you.

The focal length of a concave mirror is 10 cm and the distance from the mirror to the object is 5 cm . If so, what will be the reflection ?

Description : The focal length of a concave mirror is 10 cm and the distance from the mirror to the object is 5 cm . If so, what will be the reflection ?

Last Answer : The reflection will be unreal and straightforward.

A concave lens focal length 10 cm is placed on the axis of concave mirror of 10 cm radius at a distance of 5 cm from the mirror. An object is placed s

Description : A concave lens focal length 10 cm is placed on the axis of concave mirror of 10 cm radius at a distance of 5 cm from the mirror. An object is placed s

Last Answer : A concave lens focal length 10 cm is placed on the axis of concave mirror of 10 cm radius ... the object itself. Determine the position of the object.

At what distance should an object be placed from a convex lens of focal langth `15 cm` to obtain an image three times the size of the object ?

Description : At what distance should an object be placed from a convex lens of focal langth `15 cm` to obtain an image three times the size of the object ?

Last Answer : At what distance should an object be placed from a convex lens of focal langth `15 cm` to obtain an image three times the size of the object ?

Find the size, nature and position of image formed by a concave mirror, when an object of size 1 cm is placed at a distance of 15 cm. Given focal leng

Description : Find the size, nature and position of image formed by a concave mirror, when an object of size 1 cm is placed at a distance of 15 cm. Given focal leng

Last Answer : Find the size, nature and position of image formed by a concave mirror, when an object of size 1 cm ... 15 cm. Given focal length of mirror is 10 cm.

An object is placed at a distance equal to the focal length of convex mirror. If the focal length of the mirror be f, then the distance of the image from the pole of the mirror is (a) Less than f (b) Equal of f (c) More than f (d) Infinity

Description : An object is placed at a distance equal to the focal length of convex mirror. If the focal length of the mirror be f, then the distance of the image from the pole of the mirror is (a) Less than f (b) Equal of f (c) More than f (d) Infinity

Last Answer : Ans:(a)

A concave mirror produces a real, inverted image of the same size of the object. Then, the object is at a distance (a) Less than f from the mirror (b) Equal to f from the mirror (c) Equal to 2f from the mirror (d) Larger than 2F from the mirror where f is the focal length of the mirror

Description : A concave mirror produces a real, inverted image of the same size of the object. Then, the object is at a distance (a) Less than f from the mirror (b) Equal to f from the mirror (c) Equal to 2f from the mirror (d) Larger than 2F from the mirror where f is the focal length of the mirror

Last Answer : Ans:(c)

An object is placed on the principal axis of a convex lens of focal length 10 cm. If the distance of the object from the lens is 30 cm, what is the distance of the image formed? (1) 20 cm (2) 15 cm (3) 30 cm (4) 10 cm

Description : An object is placed on the principal axis of a convex lens of focal length 10 cm. If the distance of the object from the lens is 30 cm, what is the distance of the image formed? (1) 20 cm (2) 15 cm (3) 30 cm (4) 10 cm

Last Answer : (2) 15 cm

An object of height 4 cm is kept at a distance of 80 cm from the pole af a diverging mirror. If the focal length of the mirror is 10 cm. the height of the image formed is (a) + 3.0 cm (b) + 2.5 cm (c) + 1.0 cm (d) + 0.75 cm

Description : An object of height 4 cm is kept at a distance of 80 cm from the pole af a diverging mirror. If the focal length of the mirror is 10 cm. the height of the image formed is (a) + 3.0 cm (b) + 2.5 cm (c) + 1.0 cm (d) + 0.75 cm

Last Answer : (c) + 1.0 cm

A converging lens forms a three times magnified image of an object, which can be take on a screen. If the focal length of the lens is 30 cm, then the distance of the object from the lens is (a) - 55 cm (b) - 50 cm (c) - 45 cm (d) - 40 cm

Description : A converging lens forms a three times magnified image of an object, which can be take on a screen. If the focal length of the lens is 30 cm, then the distance of the object from the lens is (a) - 55 cm (b) - 50 cm (c) - 45 cm (d) - 40 cm

Last Answer : (d) - 40 cm

If the focal length of the object glass is 25 cm and the distance from object glass to the trunnion axis is 15 cm, the additive constant (A) 0.1 (B) 0.4 (C) 0.6 (D) 1.33

Description : If the focal length of the object glass is 25 cm and the distance from object glass to the trunnion axis is 15 cm, the additive constant (A) 0.1 (B) 0.4 (C) 0.6 (D) 1.33

Last Answer : (B) 0.4

The measured distance from a lens to the object is 20 cm and from the lens to the image is 5 cm. Calculate the focal length

Description : The measured distance from a lens to the object is 20 cm and from the lens to the image is 5 cm. Calculate the focal length

Last Answer : 1/4

An object is located 1 meter in front of a converging lens having a focal length of 20 centimeters. At what distance behind the lens (whose thickness is negligible) will the image be formed? w) 18 centimeters x) 20 centimeters y) 22 centimeters z) 25 centimeters

Description : An object is located 1 meter in front of a converging lens having a focal length of 20 centimeters. At what distance behind the lens (whose thickness is negligible) will the image be formed? w) 18 centimeters x) 20 centimeters y) 22 centimeters z) 25 centimeters

Last Answer : ANSWER: Z -- 25 CENTIMETERS

A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage sensitivity is 2 divisions per

Description : A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage sensitivity is 2 divisions per

Last Answer : A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage ... `10^(3)` D. `10^(5)`

In the reverse biased p-n junction, the current is of the order of (a) Ampere (b) Milliampere (c) Microampere (d) Nano-ampere

Description : In the reverse biased p-n junction, the current is of the order of (a) Ampere (b) Milliampere (c) Microampere (d) Nano-ampere

Last Answer : (d) Nano-ampere

Several approaches have been suggested to increase the fixation of professionally applied topical fluoride, which of the following statements IS INCORRECT regarding increasing the fixation? A. Increase concentration of fluoride in solutions B. Raise the PH of the fluoride solution C. Increase the exposure time to topical fluoride D. Pre-treat the enamel with 0.5% phosphoric acid E. Use NH4F rather than NaF at a lower PH

Description : Several approaches have been suggested to increase the fixation of professionally applied topical fluoride, which of the following statements IS INCORRECT regarding increasing the fixation? A. Increase concentration of ... with 0.5% phosphoric acid E. Use NH4F rather than NaF at a lower PH

Last Answer : B. Raise the PH of the fluoride solution

The amount invested in Kisan Vikas Patra(KVP) would get doubled in ________ months. A. 100 B. 105 C. 110 D. 115

Description : The amount invested in Kisan Vikas Patra(KVP) would get doubled in ________ months. A. 100 B. 105 C. 110 D. 115

Last Answer : C. 110 Explanation: The amount invested in Kisan Vikas Patra would get doubled in 110 months or nine years and two months. The interest rate of KVP is 7.8 per cent annually.

Minimum amount that can be invested in Kisan Vikas Patra(KVP) Certificate is _________ A. Rs.100 B. Rs.200 C. Rs.500 D. Rs.1000

Description : Minimum amount that can be invested in Kisan Vikas Patra(KVP) Certificate is _________ A. Rs.100 B. Rs.200 C. Rs.500 D. Rs.1000

Last Answer : D. Rs.1000 Explanation: KVP certificates are available in the denominations of Rs 1000, Rs 5000, Rs 10000 and Rs 50000. The minimum amount that can be invested is Rs 1000. However, there is no upper limit on the purchase of KVPs.

The KVP introduced and discontinued from a) 01-04-1997 & 30 Nov 2011 b) 01-04-1988 & 31 Dec 2011 c) 01-04-1988 and 30 Nov 2011 d) None of these

Description : The KVP introduced and discontinued from a) 01-04-1997 & 30 Nov 2011 b) 01-04-1988 & 31 Dec 2011 c) 01-04-1988 and 30 Nov 2011 d) None of these

Last Answer : b) 01-04-1988 & 31 Dec 2011

Which statement BEST describes plaque: A. It is a soft film composed mainly of food debris and can not be rinsed off teeth B. It is a soft film composed mainly of food debris and can be rinsed off teeth C. It is a soft film composed mainly of none calcified bacteria and can not be rinsed off the teeth D. It is a soft film composed mainly of dextran and can not be rinsed off the teeth E. It is a soft film composed mainly of dextran and can be rinsed off teeth.

Description : Which statement BEST describes plaque: A. It is a soft film composed mainly of food debris and can not be rinsed off teeth B. It is a soft film composed mainly of food debris and can be rinsed off ... rinsed off the teeth E. It is a soft film composed mainly of dextran and can be rinsed off teeth.

Last Answer : C. It is a soft film composed mainly of none calcified bacteria and can not be rinsed off the teeth

Why do you itch enamel for composite restorations: A. To increase surface area B. To decrease surface area C. Does not really change the surface area D. Increase the chemical bonding capability E. Decrease the chemical bonding capability

Description : Why do you itch enamel for composite restorations: A. To increase surface area B. To decrease surface area C. Does not really change the surface area D. Increase the chemical bonding capability E. Decrease the chemical bonding capability

Last Answer : A. To increase surface area