Description : the location of Class V is in, A. The buccal pit /fissure/ B. The occlusal surface C. The cervical third
Last Answer : C. The cervical third
Description : The bur should be tilted lingually when preparing the occlusal surface of class II cavity on a mandibular first premolar in order to: I. Remove unsupported enamel II. Prevent encroachment on the buccal pulp horn III. Prevent ... and II B. I and III C. II and IV D. III and IV E. IV only
Last Answer : C. II and IV
Description : In respect to Class V A. it occurs on the buccal groove (fissure) B. it occurs on the lingual groove (fissure) C. it is a result of bad oral hygiene
Last Answer : C. it is a result of bad oral hygiene
Description : The pulpal floor of the Class II cavity for a mandibular first premolar should be: GA.Parallel to occlusal plane B. Perpendicular to long axis C. Tilted lingually
Last Answer : GA.Parallel to occlusal plane
Description : What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above
Last Answer : E. None of the above
Description : The palatal pulp horn of maxillary molars is located: A. In the pulpchamber under mesiolingual cusp B. In the pulpchamber opposite the mesio distal fissure of the buccal cusp C. Under the disto lingual cusp
Last Answer : A. In the pulpchamber under mesiolingual cusp
Description : In the preparation of Premolar class I cavity what is the best way of getting retention, A. Slightly done undercut of the mesial and distal walls B. Slightly done undercut of the buccal and lingual walls C. The convergence of the cavity walls
Last Answer : B. Slightly done undercut of the buccal and lingual wall
Description : Retention for occlusal amalgam cavities in premolars is BEST provided by A. Slightly undercutting of walls with inversed cone bur B. Mesial and distal undercuts C. Buccal and lingual undercuts
Last Answer : C. Buccal and lingual undercuts
Description : Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve
Last Answer : B. Long buccal nerve
Description : Benign migratory glossitis or Geographic Tongue, manifests itself in the oral cavity as, A. Irregularly outlined areas of hyperkeratosis of the dorsal surface of the tongue B. Furrows outlined the ... (fissures) radiating from a central fissure G. Irregular area in the midline of the tongue
Last Answer : C. Loss (atrophy) of filiform papillae in multiple irregularly outlined areas
Description : An old male presents complaining of having numerous white lesions in the oral cavity within past few days. Prior to this the family physician prescribed chlorite tetracycline for an upper respiratory infection, ... plaques on the lip mucosa, buccal mucosa and the tongue. MOST LIKELY to be:
Last Answer : Moniliasis (Which is candidiasis)
Description : Upper first premolar with MO cavity; what is important about the application of the matrix band (the question has also shown too as .What is complicated by): A. The mesial concavity of the root ... pulp C. High buccal pulp horn D. High lingual pulp horn E. Concavity of distal root surface
Last Answer : A. The mesial concavity of the root surface
Description : the pulp horn most likely to be exposed in the preparation of large cavity in permanent molar tooth is,CHECK ITS VERY CONTROVERSIAL QUESTION A. Mesio-Lingual in upper first molars B. Mesio-Buccal in ... first molars D. Mesio-Lingual in lower first molars E. Mesio- Buccal in lower first molar
Last Answer : B. Mesio–Buccal in upper first molars
Description : To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression
Last Answer : B. Use mucco-compressive impression
Description : Class V lesions may originate: A. In lingual pits B. In buccal fissures C. Poor oral hygiene
Last Answer : C. Poor oral hygiene
Description : Before filling a class V abrasion cavity with GIC you should(+adc March07) A. Clean with pumice, rubber cup, water and weak acid B. Dry the cavity thoroughly before doing anything C. Acid itch cavity then dry thoroughly
Last Answer : A. Clean with pumice, rubber cup, water and weak acid
Description : Patient has hot and cold sensation and pain on percussion after the filling of class III Cavity with GIC base and composite. What will be possible cause – 1) bacterial microleakage 2) mechanical trauma of cavity cutting 3) Exothermic reaction while setting GIC
Last Answer : 2) mechanical trauma of cavity cutting
Description : When preparing a class III cavity for composite restoration; in which situation should acid itching be used: A. Always should be performed to minimise marginal leakage B. Should not be ... extra retention is required D. Only in situations where cavity is shallow to avoid pulp irritation
Last Answer : A. Always should be performed to minimise marginal leakage
Description : After the placement of a class I amalgam the patient comes back to you complaining of pain on masticating and biting; what is the first thing you would look at, A. Occlusal height B. Contacts areas
Last Answer : A. Occlusal height
Description : Marginal leakage at the proximal gingival cavosurface of a recently restored class II can be caused by: I. Insufficient condensation II. First proximal increment was too large III. Neglecting to wedge the matrix IV. Hand ... III, IV C. I, II, V D. None of the above E. All of the above
Last Answer : C. I, II, V
Description : .In which class of cavities do composite restorations show most durability: A. I B. II C. IV D. III E. V
Last Answer : D. III
Description : In class II restorations, all of the following are considered to occur as probable causes of periodontal problems except: A. Flat ridge B. Faulty or not proper contour C. Not properly polished restoration D. Cervical wall is too deeply apical E. Overextension of lining in cavity
Last Answer : E. Overextension of lining in cavity
Description : At which angle to the external surface of proximal cavity walls should a class II preparation for amalgam be finished A. An acute angle B. An obtuse angle si es el cajon proximal C. A right angle D. An angle of 45°
Last Answer : B. An obtuse angle si es el cajon proximal
Description : What is Central Sulcus (Fissure of Rolando)?
Last Answer : Central sulcus is a Deep grove that separates the parietal and frontal lobes
Description : Amalgam restoration, when do you have to replace it? a. Ditching of the edges. b. The probe penetrates the area between the margin and tooth tissue. c. Fissure of the surface of the amalgam. d. When there is chronic inflammation of the pulp.
Last Answer : c. Fissure of the surface of the amalgam.
Description : Which rotary instrument gives the smoothest enamel cut? a. carborundum stone (green stone) b. aluminum oxide stone (white stone) c. plain fissure bur d. cross-cut fissure bur e. medium diamond bur (great efficiency but roughest cut)
Last Answer : c. plain fissure bur
Description : Good oral hygiene and fluoridation is LEAST useful in preventing caries of: A. Pit and fissure B. Smooth surface C. Inaccessible areas
Last Answer : A. Pit and fissure
Description : For fissure and sealant treatment to be a part of the primary pretentive care: A. Place sealant on teeth which are at high risk of caries B. Place sealant on newly erupted teeth
Last Answer : B. Place sealant on newly erupted teeth
Description : Pit and fissure caries start at: A. bottom of the fissure B. walls of the fissure
Last Answer : B. walls of the fissure
Description : In regard to marginal leakage in amalgam: A. The wider the gap the better the chance of secondary caries B. Seal the margin with fissure sealant would prevent further breakdown C. Secondary caries may develop
Last Answer : A. The wider the gap the better the chance of secondary caries
Description : What effect do fissure sealants have on caries progression: A. Reduce new caries and hamper the progress of freshly established caries B. Reduce new caries and hamper the progress of existing caries
Last Answer : B. Reduce new caries and hamper the progress of existing caries
Description : How can you improve the adhesion of a fissure sealant: A. Acid etching technique
Last Answer : A. Acid etching technique
Description : How do you prepare the floor of pulp chamber in molars: A. Swab and dry with cotton wool and excavate B. Use round bur to flatten the floor C. Under cut walls D. Use flat end fissure bur to make it levelled
Last Answer : A. Swab and dry with cotton wool and excavate
Description : Which is the more retentive form for an anterior bridge A. ¾ partial veneer crown B. Class V inlay C. Pinlay Veneer D. Class III inlay with pins
Last Answer : A. ¾ partial veneer crown
Description : While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish
Last Answer : B. You extend your preparation and clean it
Description : Why can Class IV gold not be used in cavity as a filling material: A. Can not be polished “burnished” B. The corrosive properties
Last Answer : A. Can not be polished “burnished”
Description : Why is it difficult to use matrices on deciduous teeth, A. It hurts the kids’ parents B. The small mouth opening of kids in that age range makes it difficult to keep matrices in mouth. C. The occlusal concavity of deciduous teeth
Last Answer : . The occlusal concavity of deciduous teeth
Description : The main purpose of periodontal treatment is, A. Elimination of plaque and calculus B. Elimination of periodontal pockets C. Reformation of all the periodontal ligaments D. The elimination of all occlusal trauma
Last Answer : A. Elimination of plaque and calculus
Description : the difficulty of placing matrices on deciduous dentition is a result of, A. The small mouth of kids which result in problem keeping the matrices in their mouths B. The occlusal convergence of the deciduous teeth
Last Answer : B. The occlusal convergence of the deciduous teeth
Description : Which part of the cranium is considered as the most stable area, A. Frankfort plane B. Occlusal plane C. Anterior cranial plane D. Anterior nasal to gnathion.
Last Answer : C. Anterior cranial plane
Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension
Last Answer : B. A new centric relation record
Description : An occlusal approaching clasp TIP, A. Should occupy a predetermined undercut B. Contact the tooth under the survey line C. Rigid
Last Answer : B. Contact the tooth under the survey line
Description : Throbbing pain increases with heat and cold stimuli, the MOST probable diagnosis is, A. Cyst B. Occlusal trauma C. Advanced pulpitis
Last Answer : C. Advanced pulpitis
Description : When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane
Last Answer : A. Increase the compensatory curve
Description : When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane
Last Answer : B. Decreasing the angle orientation of the occlusal plane
Description : The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line
Last Answer : A. Away from edentulous space
Description : The MOST stable area to evaluate the craniofacial growth is: A. Nasal floor B. Cranial vault C. Occlusal plane D. Naso maxillary complex E. Anterior cranial base
Last Answer : E. Anterior cranial base
Description : What is NOT TRUE about occlusal trauma: A. Cemental tears B. Bone loss C. Mobility D. True pocket formation E. Bleeding in periodontal ligament
Last Answer : D. True pocket formation
Description : Reduced occlusal area means: A. More fracture potential for amalgam B. Less fracture potential for amalgam C. Pulpal involvement D. Perio involvement E. None of the above
Last Answer : B. Less fracture potential for amalgam
Description : Ala-Tragal line is:** A. The line running from the tragus of the nose to ala of the ear B. A guide used to orient the occlusal plane C. Parallel to Frankfurt horizontal plane D. A guide to the occluding face height in complete denture.
Last Answer : B. A guide used to orient the occlusal plane