The auxiliary occlusal rest on teeth for partial denture should be placed: A. Away from edentulous space B. Adjacent to edentulous space C. Near fulcrum line D. Away from fulcrum line

The auxiliary occlusal rest on teeth for partial denture should be placed:
A. Away from edentulous space
B. Adjacent to edentulous space
C. Near fulcrum line
D. Away from fulcrum line
by

1 Answer

Answer :

A. Away from edentulous space
by

Related questions

Periodontal damage to abutment teeth of partial denture with distal extension can best be avoided by, A. Applying Stressbreakers B. Employing bar s on all abutment teeth C. Maintaining tissue support of the distal extension D. Clasping at least two teeth for each edentulous area E. Maintaining the clasp arms on all abutment teeth at the ideal degree of tension

Description : Periodontal damage to abutment teeth of partial denture with distal extension can best be avoided by, A. Applying Stressbreakers B. Employing bar s on all abutment teeth C. Maintaining tissue support ... area E. Maintaining the clasp arms on all abutment teeth at the ideal degree of tension

Last Answer : C. Maintaining tissue support of the distal extension

Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Description : Why do you polish the teeth before seating of a partial denture: A. To smooth the rough surface B. To minimise the retention of plaque C. To increase the adoptability of occlusal rests

Last Answer : B. To minimise the retention of plaque

Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this will necessitate, A. Opening the articulator 4mm B. A new centric relation to be recorded C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Description : Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this ... C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Last Answer : B. A new centric relation to be recorded

During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Description : During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Last Answer : A. Restoration is required

Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm. This will necessitate, A. Opening the articulator 4 mm B. A new centric relation record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Last Answer : B. A new centric relation record

Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Description : Splinting the adjacent teeth in fixed bridge is primarily done to: A. Distribute the occlusal load B. Achieve better retention

Last Answer : A. Distribute the occlusal load

.When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Description : .When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Last Answer : A. Should not be felt flat

Resting face height in edentulous patients: A. Decreases when head is tilted back (the opposite is true B. Increases when lower denture is inserted C. Does not change over time

Description : Resting face height in edentulous patients: A. Decreases when head is tilted back (the opposite is true B. Increases when lower denture is inserted C. Does not change over time

Last Answer : B. Increases when lower denture is inserted

Angular cheilitis in edentulous patient with complete denture is a result of: A. Deficiency of Rivoflavin vitamin B2 B. Low vertical dimension

Description : Angular cheilitis in edentulous patient with complete denture is a result of: A. Deficiency of Rivoflavin vitamin B2 B. Low vertical dimension

Last Answer : B. Low vertical dimension

Ala-Tragal line is:** A. The line running from the tragus of the nose to ala of the ear B. A guide used to orient the occlusal plane C. Parallel to Frankfurt horizontal plane D. A guide to the occluding face height in complete denture.

Description : Ala-Tragal line is:** A. The line running from the tragus of the nose to ala of the ear B. A guide used to orient the occlusal plane C. Parallel to Frankfurt horizontal plane D. A guide to the occluding face height in complete denture.

Last Answer : B. A guide used to orient the occlusal plane

When describing a removable partial denture, the minor connector refers to:** A. Rigid components anterior to the premolar teeth B. Flexible components, in contrast to rigid major connectors C. Smaller connectors which connect denture components to the major connector D. The components of the denture base which provides reciprocation

Description : When describing a removable partial denture, the minor connector refers to:** A. Rigid components anterior to the premolar teeth B. Flexible components, in contrast to rigid major connectors ... components to the major connector D. The components of the denture base which provides reciprocation

Last Answer : C. Smaller connectors which connect denture components to the major connector

To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Description : To minimize the load on a free-end saddle partial denture: (distal extension saddle) A. Use teeth with narrow Buccal-Lingual dimension B. Use mucco-compressive impression

Last Answer : B. Use mucco-compressive impression

Why would you decide to replace the anterior missing teeth for partial denture using bridge: A. Aesthetic B. Overjet C. Overbite

Description : Why would you decide to replace the anterior missing teeth for partial denture using bridge: A. Aesthetic B. Overjet C. Overbite

Last Answer : A. Aesthetic

In removable partial dentures, the principle of an indirect retainer is that it: a. Stabilises against lateral movement b. Prevents settling of major connectors c. Restricts tissue movement at the distal extension base of the partial denture. d. Minimises movement of the base away from the supporting tissue

Description : In removable partial dentures, the principle of an indirect retainer is that it: a. Stabilises against lateral movement b. Prevents settling of major connectors c. Restricts tissue movement at ... base of the partial denture. d. Minimises movement of the base away from the supporting tissue

Last Answer : d. Minimises movement of the base away from the supporting tissue

In removable partial denture, the principle of an indirect retainer is to: A. Stabilise against lateral movement B. Prevent settling of major connectors C. Restrict tissue movement at the distal extension base of the partial denture D. Minimise movement of the base away from the supporting tissue

Description : In removable partial denture, the principle of an indirect retainer is to: A. Stabilise against lateral movement B. Prevent settling of major connectors C. Restrict tissue movement at the distal ... base of the partial denture D. Minimise movement of the base away from the supporting tissue

Last Answer : D. Minimise movement of the base away from the supporting tissue

The removable partial denture requires relining what would be the most appropriate action, A. take a new impression by asking the patient to occlude on it B. Provide equal space (maybe it was thickness) between denture and gingival tissues. C. Make sure the framework and retainers are seated in place before taking impression

Description : The removable partial denture requires relining what would be the most appropriate action, A. take a new impression by asking the patient to occlude on it B. Provide equal space (maybe it was ... gingival tissues. C. Make sure the framework and retainers are seated in place before taking impression

Last Answer : C. Make sure the framework and retainers are seated in place before taking impression

Why do you construct a lower removable partial denture with lingual bar: A. It is used when the space between raised floor, mouth and gingival margin is minimal B. Plaque accumulation is less than with lingual plate C. Should be made thicker when short

Description : Why do you construct a lower removable partial denture with lingual bar: A. It is used when the space between raised floor, mouth and gingival margin is minimal B. Plaque accumulation is less than with lingual plate C. Should be made thicker when short

Last Answer : B. Plaque accumulation is less than with lingual plate

Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with conventional complete denture C. Alveolar bone resorption is reduced D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Description : Which one of following statement about Overdenture is not correct: A. Greater occlusal loads can be applied by the patient B. Retention and stability are generally better than with ... The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

Last Answer : D. The retained roots are covered by the denture thus protecting them from caries and periodontal diseases

To increase the stability of the lower denture, A. The occlusal plane should be below the tongue B. The occlusal plane should be above the tongue C. The lingual flanges should be concave

Description : To increase the stability of the lower denture, A. The occlusal plane should be below the tongue B. The occlusal plane should be above the tongue C. The lingual flanges should be concave

Last Answer : A. The occlusal plane should be below the tongue

When repairing a fracture of a lower complete denture, which statement is correct: A. Self curing will distort the denture B. Cold curing will not be strong enough because of small area of attachment C. There is a possibility of occlusal disharmony

Description : When repairing a fracture of a lower complete denture, which statement is correct: A. Self curing will distort the denture B. Cold curing will not be strong enough because of small area of attachment C. There is a possibility of occlusal disharmony

Last Answer : C. There is a possibility of occlusal disharmony

What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Description : What is the relationship of the retentive portion of the partial dentures retainers to the survey line of abutment: A. Gingival /Below/ B. Occlusal /Above/ C. No relation

Last Answer : A. Gingival /Below/

Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be shaped to properly located rigid parts of framework C. Areas used for guideline planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Description : Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be ... planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Last Answer : F. Depth of rest seats

A tooth under occlusal trauma shows A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation Vertical defects occur adjacent to a tooth and usually in the form of a triangular area of missing bone, known as triangulation E. All of the above

Description : A tooth under occlusal trauma shows A. Bone resorption B. Necrosis of the pulp C. Hypercementosis D. Triangulation Vertical defects occur adjacent to a tooth and usually in the form of a triangular area of missing bone, known as triangulation E. All of the above

Last Answer : E. All of the above

In partial dentures the guidelines “Guiding Planes” serve to: A. Aid in balancing occlusion B. Assure predictable clasp retention C. Form right angle with the occlusal plane D. Eliminate the necessity for precision attachment E. Eliminate the necessity for a posterior clasp

Description : In partial dentures the guidelines “Guiding Planes” serve to: A. Aid in balancing occlusion B. Assure predictable clasp retention C. Form right angle with the occlusal plane D. Eliminate the necessity for precision attachment E. Eliminate the necessity for a posterior clasp

Last Answer : B. Assure predictable clasp retention

A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts

Description : A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts

Last Answer : C. Distortion of impression

When all other removable partial denture considerations remain unchanged; clasps constructed of which material can engage the deepest undercut: A. Chrome cobalt casts B. Nickel chrome casts C. Wrought stainless steel (0,5mm) D. Wrought gold

Description : When all other removable partial denture considerations remain unchanged; clasps constructed of which material can engage the deepest undercut: A. Chrome cobalt casts B. Nickel chrome casts C. Wrought stainless steel (0,5mm) D. Wrought gold

Last Answer : D. Wrought gold

Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Description : Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Last Answer : E. Elastic limit was exceeded

The means by which one part of a partial denture framework opposes the action of the retainer in faction is:** A. Tripoding B. Reciprocation C. Stress breaking D. Indirect retention

Description : The means by which one part of a partial denture framework opposes the action of the retainer in faction is:** A. Tripoding B. Reciprocation C. Stress breaking D. Indirect retention

Last Answer : B. Reciprocation

In planning and construction of a cast metal partial denture the study cast, M07 A. facilitate the construction of custom/special trays B. minimize the need for articulating C. provide only limited information about inter ridge distance, which is best assessed clinically D. can be used as a working cast when duplicating facilities are not available

Description : In planning and construction of a cast metal partial denture the study cast, M07 A. facilitate the construction of custom/special trays B. minimize the need for articulating C. provide only ... best assessed clinically D. can be used as a working cast when duplicating facilities are not available

Last Answer : A. facilitate the construction of custom/special trays

To obtain a desired projection of occlusal loads, the floor of the occlusal rest should, A. Be convex B. Slope from the marginal ridge towards contact?? of abutment C. Slope from contact?? of abutment towards the marginal ridge D. Be concave E. Does not slope from the marginal ridge towards contact?? of abutment F. None of the above

Description : To obtain a desired projection of occlusal loads, the floor of the occlusal rest should, A. Be convex B. Slope from the marginal ridge towards contact?? of abutment C. Slope from contact?? of ... E. Does not slope from the marginal ridge towards contact?? of abutment F. None of the above

Last Answer : B. Slope from the marginal ridge towards contact?? of abutment

Why is it difficult to use matrices on deciduous teeth, A. It hurts the kids’ parents B. The small mouth opening of kids in that age range makes it difficult to keep matrices in mouth. C. The occlusal concavity of deciduous teeth

Description : Why is it difficult to use matrices on deciduous teeth, A. It hurts the kids’ parents B. The small mouth opening of kids in that age range makes it difficult to keep matrices in mouth. C. The occlusal concavity of deciduous teeth

Last Answer : . The occlusal concavity of deciduous teeth

the difficulty of placing matrices on deciduous dentition is a result of, A. The small mouth of kids which result in problem keeping the matrices in their mouths B. The occlusal convergence of the deciduous teeth

Description : the difficulty of placing matrices on deciduous dentition is a result of, A. The small mouth of kids which result in problem keeping the matrices in their mouths B. The occlusal convergence of the deciduous teeth

Last Answer : B. The occlusal convergence of the deciduous teeth

When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Description : When patient bites in protrusion with complete dentures you notice that the posterior teeth do not meet, what would you do to solve this: A. Increase the compensatory curve B. Decrease the angle of the occlusal plane

Last Answer : A. Increase the compensatory curve

When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Description : When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Last Answer : B. Decreasing the angle orientation of the occlusal plane

Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Description : Which nerve is anesthesised in anterior border of ramus and 1 cm above occlusal plane of lower posterior teeth: A. Lingual nerve B. Long buccal nerve

Last Answer : B. Long buccal nerve

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically acceptable after treatment B. there will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. at least two third of the original alveolar process will remain for adequate periodontal support D. the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. the inter occlusal distance will be physiologically ... the aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. the inter occlusal distance will be physiologically acceptable after treatment

The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

Description : The position of the lingual cusp of a maxillary first premolar during setting of teeth and on occlusal view is positioned:** A. Distally B. Mesially

Last Answer : B. Mesially

What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Description : What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Last Answer : C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically acceptable after treatment B. There will be sufficient tooth bulk in the abutment teeth for proper retention of the crowns C. At least two third of the original alveolar process will remain for adequate periodontal support D. The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Description : The main factor controlling a decision to increase the occlusal height of teeth for extensive oral reconstruction is whether, A. The inter occlusal distance will be physiologically ... . The aesthetic appearance of the patient will improve sufficiently to warrant the planned reconstruction

Last Answer : A. The inter occlusal distance will be physiologically acceptable after treatment

What is TRUE about vertical dimension: A. Does not change for the whole life B. Decreases when head is tilted back (is the opposite and if is tilted forward decreases, patient supine reduced, stress and pain also reduced) C. Increases when a lower denture is placed in mouth

Description : What is TRUE about vertical dimension:  A. Does not change for the whole life   B. Decreases when head is tilted back (is the opposite and if is tilted forward decreases, patient  supine reduced, stress and pain also reduced)  C. Increases when a lower denture is placed in mouth 

Last Answer : C. Increases when a lower denture is placed in mouth 

Probe pressure at the sulcus of pocket should not be more than enough to: A. Feel the top of the crestal bone B. Balance the pressure between fulcrum and grasp C. Define the location of the apical and the calculus deposit D. Feel the coronal end of the attached tissues E. Limit the lateral pressure

Description : Probe pressure at the sulcus of pocket should not be more than enough to: A. Feel the top of the crestal bone B. Balance the pressure between fulcrum and grasp C. Define the location of ... and the calculus deposit D. Feel the coronal end of the attached tissues E. Limit the lateral pressure

Last Answer : D. Feel the coronal end of the attached tissues

The biting load of denture base to tissues compared to teeth are, A. Ten times more B. Ten times less C. Equal

Description : The biting load of denture base to tissues compared to teeth are, A. Ten times more B. Ten times less C. Equal

Last Answer : B. Ten times less

The hamular notch is important in full denture construction because it aids in the setting position of the artificial teeth A. First statement is true, but the reason given is false B. Both statements are true C. Both statements are untrue

Description : The hamular notch is important in full denture construction because it aids in the setting position of the artificial teeth A. First statement is true, but the reason given is false B. Both statements are true C. Both statements are untrue

Last Answer : A. First statement is true, but the reason given is false

Ankyloglossia is caused by: A. Edentulous ridge B. Short lingual frenulum C. Short labial frenulum

Description : Ankyloglossia is caused by: A. Edentulous ridge B. Short lingual frenulum C. Short labial frenulum

Last Answer : B. Short lingual frenulum

In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each other C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Description : In bridge work, which of the followings terms is NOT CORRECT: A. A retainer could be a crown to which a bridge is attached to B. A connector connects a pontic to a retainer or two retainers to each ... lie and comes in contact with pontic D. A pontic is an artificial tooth as part of a bridge

Last Answer : C. The saddle is the area of the edentulous ridge over which the pontic will lie and comes in contact with pontic

An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Description : An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Last Answer : A. Palatal reduction may be of minimal thickness.

What control tooth or teeth should be used when testing a suspected pulpally involved tooth: A. Adjacent tooth and contralateral teeth B. Contralateral and opposing teeth C. Opposing and adjacent teeth D. Test only suspected tooth/teeth E. All of the above

Description : What control tooth or teeth should be used when testing a suspected pulpally involved tooth: A. Adjacent tooth and contralateral teeth B. Contralateral and opposing teeth C. Opposing and adjacent teeth D. Test only suspected tooth/teeth E. All of the above

Last Answer : A. Adjacent tooth and contralateral teeth

10 years-old boy looses a permanent mandibular molar; what is affected: A. Teeth adjacent to extracted teeth B. Teeth on both arches on same side C. The remaining teeth in the mouth D. Teeth directly opposite to the extracted tooth E. Teeth on the same quadrant

Description : 10 years-old boy looses a permanent mandibular molar; what is affected: A. Teeth adjacent to extracted teeth B. Teeth on both arches on same side C. The remaining teeth in the mouth D. Teeth directly opposite to the extracted tooth E. Teeth on the same quadrant

Last Answer : C. The remaining teeth in the mouth

A mandibular permanent first molar has to be extracted, this will affect: A. Adjacent teeth B. Teeth in the same quadrant C. Both arches the same side D. Full mouth

Description : A mandibular permanent first molar has to be extracted, this will affect: A. Adjacent teeth B. Teeth in the same quadrant C. Both arches the same side D. Full mouth

Last Answer : D. Full mouth

An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Description : An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Last Answer : A. Palatal reduction may be of minimal thickness