Which symbol is used to separate more than one command in the same command line? A. $ B. # C. : D. ;

Which symbol is used to separate more than one command in the same command
line?
A. $
B. #
C. :
D. ;
by

1 Answer

Answer :

D. ;
by

Related questions

Which symbol will be used with grep command to match the pattern pat at the beginning of a line? A. ^pat B. $pat C. pat$ D. pat^ E. None of the above

Description : Which symbol will be used with grep command to match the pattern pat at the beginning of a line? A. ^pat B. $pat C. pat$ D. pat^ E. None of the above

Last Answer : A. ^pat

Which of the following commands would return process_id of sleep command? (A) Sleep 1 and echo $? (B) Sleep 1 and echo $# (C) Sleep 1 and echo $x (D) Sleep 1 and echo $!

Description : Which of the following commands would return process_id of sleep command? (A) Sleep 1 and echo $? (B) Sleep 1 and echo $# (C) Sleep 1 and echo $x (D) Sleep 1 and echo $!

Last Answer : (D) Sleep 1 and echo $!

The output generated by the LINUX command : $ seq 1 2 10 will be (A) 1 2 10 (B) 1 2 3 4 5 6 7 8 9 10 (C) 1 3 5 7 9 (D) 1 5 10

Description : The output generated by the LINUX command : $ seq 1 2 10 will be (A) 1 2 10 (B) 1 2 3 4 5 6 7 8 9 10 (C) 1 3 5 7 9 (D) 1 5 10

Last Answer : (C) 1 3 5 7 9

The Unix command: $ vi file1 file2 (A) Edits file1 and stores the contents of file1 in file2 (B) Both files i.e. file1 and file2 can be edited using ‘ex’ command to travel between files (C) Both files can be edited using the ‘mv’ command to move between the files (D) Edits file1 first, saves it and the edits file2

Description : The Unix command: $ vi file1 file2 (A) Edits file1 and stores the contents of file1 in file2 (B) Both files i.e. file1 and file2 can be edited using ex' command to travel between files (C) Both ... using the mv' command to move between the files (D) Edits file1 first, saves it and the edits file2

Last Answer : (B) Both files i.e. file1 and file2 can be edited using ‘ex’ command to travel between files

Unix command to change the case of first three lines of file “shortlist” from lower to upper (1) $ tr ‘[a-z]’ ‘[A-Z]’ shortlist | head-3 (2) $ head-3 shortlist | tr ‘[a-z]’ ‘[A-Z]’ (3) $ tr head-3 shortlist ‘[A-Z]’ ‘[a-z]’ (4) $ tr shortlist head-3 ‘[a-z]’ ‘[A-Z]’

Description : Unix command to change the case of first three lines of file “shortlist” from lower to upper (1) $ tr ‘[a-z]’ ‘[A-Z]’ shortlist | head-3 (2) $ head-3 shortlist | tr ‘[a-z]’ ‘[A-Z]’ (3) $ tr head-3 shortlist ‘[A-Z]’ ‘[a-z]’ (4) $ tr shortlist head-3 ‘[a-z]’ ‘[A-Z]’

Last Answer : (2) $ head-3 shortlist | tr ‘[a-z]’ ‘[A-Z]’ 

In XML we can specify the frequency of an element by using the symbols: (A) + * ! (B) # * ! (C) + * ? (D) - * ?

Description : In XML we can specify the frequency of an element by using the symbols: (A) + * ! (B) # * ! (C) + * ? (D) - * ?

Last Answer : (C) + * ?

Which of the following formulas is used by Pay-per-click? a. Ads clicked (#) / Advertising cost ($) b. Advertising cost ($) + Ads clicked (#)c. Advertising cost ($) / Ads clicked (#) d. Ads clicked (#) * Advertising cost ($

Description : Which of the following formulas is used by Pay-per-click? a. Ads clicked (#) / Advertising cost ($) b. Advertising cost ($) + Ads clicked (#) c. Advertising cost ($) / Ads clicked (#) d. Ads clicked (#) * Advertising cost ($

Last Answer : c. Advertising cost ($) / Ads clicked (#)

The formula of Pay-per-click is? A. Advertising cost ($) + Ads clicked (#) B. Ads clicked (#) / Advertising cost ($) C. Advertising cost ($) / Ads clicked (#) D. Ads clicked (#) * Advertising cost ($)

Description : The formula of Pay-per-click is? A. Advertising cost ($) + Ads clicked (#) B. Ads clicked (#) / Advertising cost ($) C. Advertising cost ($) / Ads clicked (#) D. Ads clicked (#) * Advertising cost ($)

Last Answer : C. Advertising cost ($) / Ads clicked (#)

What would be the proper command to set a DCE clock rate of 56k for a serial interface? A. Router (config) # clockrate 56000 B. Router# clockrate 56000. C. Router (config-if) #clock rate 56000 D. Router (config-if) # clockrate 56k

Description : What would be the proper command to set a DCE clock rate of 56k for a serial interface? A. Router (config) # clockrate 56000 B. Router# clockrate 56000. C. Router (config-if) #clock rate 56000 D. Router (config-if) # clockrate 56k

Last Answer : Router (config-if) #clock rate 56000

What does the following command do? grep −vn “abc” x (A) It will print all of the lines in the file x that match the search string “abc” (B) It will print all of the lines in file x that do not match the search string “abc” (C) It will print total number of lines in the file x that match the search string “abc” (D) It will print the specific line numbers of the file x in which there is a match for string “abc”

Description : What does the following command do? grep −vn abc x (A) It will print all of the lines in the file x that match the search string abc (B) It will print all of the lines in file x that do not ... (D) It will print the specific line numbers of the file x in which there is a match for string abc

Last Answer : (A) It will print all of the lines in the file x that match the search string “abc”

To invoke assembler following command are given at command line: a. $ hello.s -o hello.o b. — $as hello.s -o 0 c. $ as hello —-o hello.o d. $ashello.s—o hello.o

Description : To invoke assembler following command are given at command line: a. $ hello.s -o hello.o b. — $as hello.s -o 0 c. $ as hello —-o hello.o d. $ashello.s—o hello.o

Last Answer : d. $ashello.s—o hello.o

The command which transcribes the standard input to the standard output and also makes a copy of the same in a file is A. tee B. tr C. sort D. grep E. None of the above

Description : The command which transcribes the standard input to the standard output and also makes a copy of the same in a file is A. tee B. tr C. sort D. grep E. None of the above

Last Answer : A. tee

What does the use of the # symbol mean in XML Document Type Definitions?

Description : What does the use of the # symbol mean in XML Document Type Definitions?

Last Answer : answer:

Which one of the following is correct for overloaded functions in C++? (1) Compiler sets up a separate function for every definition of function. (2) Compiler does not set up a separate function for every definition of function. (3) Overloaded functions cannot handle different types of objects. (4) Overloaded functions cannot have same number of arguments.

Description : Which one of the following is correct for overloaded functions in C++? (1) Compiler sets up a separate function for every definition of function. (2) Compiler does not set up a ... functions cannot handle different types of objects. (4) Overloaded functions cannot have same number of arguments.

Last Answer : Answer: 1

Which command is used to concatenate all files beginning with the string 'emp' and followed by a non-numeric characters? A. cat emp[!0-9] B. more [emp][!0-9] C. cat emp[x-z]

Description : Which command is used to concatenate all files beginning with the string 'emp' and followed by a non-numeric characters? A. cat emp[!0-9] B. more [emp][!0-9] C. cat emp[x-z]

Last Answer : A. cat emp[!0-9]

Which command is used to display the top of the file? A. cat B. head C. more D. grep E. None of the above

Description : Which command is used to display the top of the file? A. cat B. head C. more D. grep E. None of the above

Last Answer : B. head

Which of the following keys is used to move the cursor to the end of the paragraph. A. } B. { C. | D. $ E. None of the above

Description : Which of the following keys is used to move the cursor to the end of the paragraph. A. } B. { C. | D. $ E. None of the above

Last Answer : A. }

The value of postfix expression: 8 3 4 + - 3 8 2 / + * 2 $ 3+ is (A) 17 (B) 131 (C) 64 (D) 52

Description : The value of postfix expression: 8 3 4 + - 3 8 2 / + * 2 $ 3+ is (A) 17 (B) 131 (C) 64 (D) 52

Last Answer : (D) 52

Which command is used to display a file contents in octal form? A. cd B. od C. of D. oct E. None of the above

Description : Which command is used to display a file contents in octal form? A. cd B. od C. of D. oct E. None of the above

Last Answer : B. od

Which command is used to count just the number of characters in a file? A. wc - 1 B. wc -c C. wc -w D. wc -r E. None of the above

Description : Which command is used to count just the number of characters in a file? A. wc - 1 B. wc -c C. wc -w D. wc -r E. None of the above

Last Answer : B. wc -c

Which command is used to remove a file? A. remove B. rm C. mv D. del E. None of the above

Description : Which command is used to remove a file? A. remove B. rm C. mv D. del E. None of the above

Last Answer : B. rm

Which of the following is not a communication command. A. write B. mesg C. mail D. grep E. None of the above

Description : Which of the following is not a communication command. A. write B. mesg C. mail D. grep E. None of the above

Last Answer : D. grep

The Octal number to be given alogn with chmod command to make a file readable, writable and executable to the owner, readable and executable to group and others is: A. 000 B. 755 C. 744 D. 555 E. None of the above

Description : The Octal number to be given alogn with chmod command to make a file readable, writable and executable to the owner, readable and executable to group and others is: A. 000 B. 755 C. 744 D. 555 E. None of the above

Last Answer : B. 755

Which of the following files will displayed by this command cat *ch* A. patch B. catch C. .ch D. All of the above E. None of the above

Description : Which of the following files will displayed by this command cat *ch* A. patch B. catch C. .ch D. All of the above E. None of the above

Last Answer : D. All of the above

Which command is used to remove the read permission of the file 'note' from both the group and others? A. chmod go+r note B. chmod go+rw note C. chmod go-x note D. chmod go-r, 4-x note E. None of the above

Description : Which command is used to remove the read permission of the file 'note' from both the group and others? A. chmod go+r note B. chmod go+rw note C. chmod go-x note D. chmod go-r, 4-x note E. None of the above

Last Answer : D. chmod go-r, 4-x note

Which command sends the word count of the file infile to the newfile. A. wc infile >newfile B. wc <infile >newfile C. wc infile - newfile D. wc infile | newfile E. None of the above

Description : Which command sends the word count of the file infile to the newfile. A. wc infile >newfile B. wc newfile C. wc infile - newfile D. wc infile | newfile E. None of the above

Last Answer : A. wc infile >newfile

Which command is used to extract specific columns from the file? A. cat B. cut C. grep D. paste E. None of the above

Description : Which command is used to extract specific columns from the file? A. cat B. cut C. grep D. paste E. None of the above

Last Answer : B. cut

Which command is used to remove a directory? A. rd B. rmdir C. dldir D. rdir E. None of the above

Description : Which command is used to remove a directory? A. rd B. rmdir C. dldir D. rdir E. None of the above

Last Answer : B. rmdir

Which command is used to change protection mode of files starting with the string emp and ending with 1,2, or 3? A. chmod u+x emp[l-3] B. chmod 777 emp* C. chmod u+r ??? emp D. chmod 222 emp? E. None of the above

Description : Which command is used to change protection mode of files starting with the string emp and ending with 1,2, or 3? A. chmod u+x emp[l-3] B. chmod 777 emp* C. chmod u+r ??? emp D. chmod 222 emp? E. None of the above

Last Answer : A. chmod u+x emp[l-3]

Which command is used to copy all files having the string chap and any two characters after that to the progs directory? A. cp chap?? progs B. cp chap* progs C. cp chap[12] /progs/*.*

Description : Which command is used to copy all files having the string chap and any two characters after that to the progs directory? A. cp chap?? progs B. cp chap* progs C. cp chap[12] /progs/*.*

Last Answer : A. cp chap?? progs

Which command is used to sort the lines of data in a file in reverse order A. sort B. sh C. st D. sort -r E. None of the above

Description : Which command is used to sort the lines of data in a file in reverse order A. sort B. sh C. st D. sort -r E. None of the above

Last Answer : D. sort -r

The command javac A) Converts a java program into binary code B) Converts a java program into bytecode C) Converts a java program into machine language D) None of the above.

Description : The command javac A) Converts a java program into binary code B) Converts a java program into bytecode C) Converts a java program into machine language D) None of the above.

Last Answer : B) Converts a java program into bytecode

The command javac is used to A) debug a java program B) compile a java program C) interpret a java program D) execute a java program

Description : The command javac is used to A) debug a java program B) compile a java program C) interpret a java program D) execute a java program

Last Answer : B) compile a java program

The type(s) of auto executing macros, in Microsoft word is/are A) Auto execute B) Auto macro C) Command macro D) All of the above

Description : The type(s) of auto executing macros, in Microsoft word is/are A) Auto execute B) Auto macro C) Command macro D) All of the above

Last Answer : D) All of the above

For using a specific database …………… command is used. A) use database B) databasename use C) Both A &B D) None of them

Description : For using a specific database …………… command is used. A) use database B) databasename use C) Both A &B D) None of them

Last Answer : A) use database

To delete a database ................... command is used A) delete database database_name B) Delete database_name C) drop database database_name D) drop database_name

Description : To delete a database ................... command is used A) delete database database_name B) Delete database_name C) drop database database_name D) drop database_name

Last Answer : C) drop database database_name

Suppose d = {“john”:40, “peter”:45}. To obtain the number of entries in dictionary which command do we use? a) d.size() b) len(d) c) size(d) d) d.len()

Description : Suppose d = {“john”:40, “peter”:45}. To obtain the number of entries in dictionary which command do we use? a) d.size() b) len(d) c) size(d) d) d.len()

Last Answer : b) len(d)

Suppose d = {“john”:40, “peter”:45}, to delete the entry for “john” what command do we use a) d.delete(“john”:40) b) d.delete(“john”) c) del d[“john”]. d) del d(“john”:40)

Description : Suppose d = {“john”:40, “peter”:45}, to delete the entry for “john” what command do we use a) d.delete(“john”:40) b) d.delete(“john”) c) del d[“john”]. d) del d(“john”:40)

Last Answer : c) del d[“john”].

To remove string “hello” from list1, we use which command ? a) list1.remove(“hello”) b) list1.remove(hello) c) list1.removeAll(“hello”) d) list1.removeOne(“hello”)

Description : To remove string “hello” from list1, we use which command ? a) list1.remove(“hello”) b) list1.remove(hello) c) list1.removeAll(“hello”) d) list1.removeOne(“hello”)

Last Answer : d) list1.removeOne(“hello”)

To insert 5 to the third position in list1, we use which command ? a) list1.insert(3, 5) b) list1.insert(2, 5) c) list1.add(3, 5) d) list1.append(3, 5)

Description : To insert 5 to the third position in list1, we use which command ? a) list1.insert(3, 5) b) list1.insert(2, 5) c) list1.add(3, 5) d) list1.append(3, 5)

Last Answer : a) list1.insert(3, 5)

To add a new element to a list we use which command ? a) list1.add(5) b) list1.append(5) c) list1.addLast(5) d) list1.addEnd(5)

Description : To add a new element to a list we use which command ? a) list1.add(5) b) list1.append(5) c) list1.addLast(5) d) list1.addEnd(5)

Last Answer : a) list1.add(5)

The mv command changes (A) the inode (B) the inode-number (C) the directory entry (D) both the directory entry and the inode

Description : The mv command changes (A) the inode (B) the inode-number (C) the directory entry (D) both the directory entry and the inode

Last Answer : (C) the directory entry

What will be the output of the following Unix command ? $rm chap0\[1 - 3\] (A) Remove file chap0[1 - 3] (B) Remove file chap01, chap02, chap03 (C) Remove file chap\[1 - 3\] (D) None of the above

Description : What will be the output of the following Unix command ? $rm chap0\[1 - 3\] (A) Remove file chap0[1 - 3] (B) Remove file chap01, chap02, chap03 (C) Remove file chap\[1 - 3\] (D) None of the above

Last Answer : (A) Remove file chap0[1 - 3]

In Unix, the command to enable execution permission for file “mylife” by all is ................ (A) Chmod ugo+X myfile (B) Chmod a+X myfile (C) Chmod +X myfile (D) All of the above

Description : In Unix, the command to enable execution permission for file “mylife” by all is ................ (A) Chmod ugo+X myfile (B) Chmod a+X myfile (C) Chmod +X myfile (D) All of the above

Last Answer : (D) All of the above

Which of the following statement is not correct with reference to cron daemon in UNIX O.S? (A) The cron daemon is the standard tool for running commands on a predetermined schedule. (B) It starts when the system boots and runs as long as the system is up. (C) Cron reads configuration files that contain list of command lines and the times at which they invoked. (D) Crontab for individual users are not stored.

Description : Which of the following statement is not correct with reference to cron daemon in UNIX O.S? (A) The cron daemon is the standard tool for running commands on a predetermined schedule. (B) It starts ... command lines and the times at which they invoked. (D) Crontab for individual users are not stored.

Last Answer : (D) Crontab for individual users are not stored.

What is the function of following UNIX command? WC – l<a >b& (A) It runs the word count program to count the number of lines in its input, a, writing the result to b, as a foreground process. (B) It runs the word count program to count the number of lines in its input, a, writing the result to b, but does it in the background. (C) It counts the errors during the execution of a process, a, and puts the result in process b. (D) It copies the ‘ l ’ numbers of lines of program from file, a, and stores in file b.

Description : What is the function of following UNIX command? WC - lb& (A) It runs the word count program to count the number of lines in its input, a, writing the result to b, as a foreground process. (B) It runs ... (D) It copies the l ' numbers of lines of program from file, a, and stores in file b.

Last Answer : (B) It runs the word count program to count the number of lines in its input, a, writing the result to b, but does it in the background.

A segment is any object described by GKS commands and data that start with CREATE SEGMENT and Terminates with CLOSE SEGMENT command. What functions can be performed on these segments? (1) Translation and Rotation (2) Panning and Zooming (3) Scaling and Shearing (4) Translation, Rotation, Panning and Zooming

Description : A segment is any object described by GKS commands and data that start with CREATE SEGMENT and Terminates with CLOSE SEGMENT command. What functions can be performed on these segments? (1) Translation ... 2) Panning and Zooming (3) Scaling and Shearing (4) Translation, Rotation, Panning and Zooming

Last Answer : Translation, Rotation, Panning and Zooming

A thread is usually defined as a light weight process because an Operating System (OS) maintains smaller data structure for a thread than for a process. In relation to this, which of the following statement is correct? (A) OS maintains only scheduling and accounting information for each thread. (B) OS maintains only CPU registers for each thread. (C) OS does not maintain a separate stack for each thread. (D) OS does not maintain virtual memory state for each thread.

Description : A thread is usually defined as a light weight process because an Operating System (OS) maintains smaller data structure for a thread than for a process. In relation to this, which of the following ... separate stack for each thread. (D) OS does not maintain virtual memory state for each thread.

Last Answer : (B) OS maintains only CPU registers for each thread.

Which of the following is FALSE ? (A) The grammar S ⟶ aSb|bSa|SS|∈, where S is the only non-terminal symbol and ∈ is the null string, is ambiguous. (B) SLR is powerful than LALR. (C) An LL(1) parser is a top-down parser. (D) YACC tool is an LALR(1) parser generator.

Description : Which of the following is FALSE ? (A) The grammar S ⟶ aSb|bSa|SS|∈, where S is the only non-terminal symbol and ∈ is the null string, is ambiguous. (B) SLR is powerful than LALR. (C) An LL(1) parser is a top-down parser. (D) YACC tool is an LALR(1) parser generator.

Last Answer : (B) SLR is powerful than LALR.