What would be the proper command to set a DCE clock rate of 56k for a serial interface? A. Router (config) # clockrate 56000 B. Router# clockrate 56000. C. Router (config-if) #clock rate 56000 D. Router (config-if) # clockrate 56k

What would be the proper command to set a DCE clock rate of 56k for a serial interface?
A. Router (config) # clockrate 56000
B. Router# clockrate 56000.
C. Router (config-if) #clock rate 56000
D. Router (config-if) # clockrate 56k
by

1 Answer

Answer :

Router (config-if) #clock rate 56000
by

Related questions

The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Description : The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Last Answer : DTE/DCE interface

The …………… command customizes the kernel configuration and generates the files needed to compile and link the kernel. A. ping B. ifconfig C. make config D. finger

Description : The …………… command customizes the kernel configuration and generates the files needed to compile and link the kernel. A. ping B. ifconfig C. make config D. finger

Last Answer : C. make config

The …………………... command can set or display the configuration values for a network interface. A. ping B. traceroute C. ifconfig D. finger

Description : The …………………... command can set or display the configuration values for a network interface. A. ping B. traceroute C. ifconfig D. finger

Last Answer : C. ifconfig

A system that performs parallel-to-serial and serial-to-parallel conversion of data link. A. DCE B. DTE C. Modem D. PC

Description : A system that performs parallel-to-serial and serial-to-parallel conversion of data link. A. DCE B. DTE C. Modem D. PC

Last Answer : B. DTE

The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Description : The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Last Answer : Modem

What is the number of separate protocol layers at the serial interface gateway specified by the X.25 standard? a. 4 b. 2 c. 6 d. 3 3. none of the above

Description : What is the number of separate protocol layers at the serial interface gateway specified by the X.25 standard? a. 4 b. 2 c. 6 d. 3 3. none of the above

Last Answer : 3

SLIP stands for………………………….. A. Syncronous Level Interface Protocol B. Serial Line Interface Protocol C. Syncronous Level Internet Protocol D. Serial Line Internet Protocol

Description : SLIP stands for………………………….. A. Syncronous Level Interface Protocol B. Serial Line Interface Protocol C. Syncronous Level Internet Protocol D. Serial Line Internet Protocol

Last Answer : D. Serial Line Internet Protocol

Which command does not show that two devices are failing to route packets between them successfully? A. show interface B. trace C. telnet D. ping

Description : Which command does not show that two devices are failing to route packets between them successfully? A. show interface B. trace C. telnet D. ping

Last Answer : show interface

The……………………command can determine which interface is used on a system from the messages displayed on the console during a boot. A. dmesg B. traceroute C. ifconfig D. finger

Description : The……………………command can determine which interface is used on a system from the messages displayed on the console during a boot. A. dmesg B. traceroute C. ifconfig D. finger

Last Answer : A. dmesg

What interface card do you need toconnect to a network? A) ISP card B) Wireless card C) Router D) NIC

Description : What interface card do you need toconnect to a network? A) ISP card B) Wireless card C) Router D) NIC

Last Answer : NIC

IGMP helps a ________ router createand update a list of loyal members relatedto each router interface. A) broadcast B) unicast C) multicast D) noneof the above

Description : IGMP helps a ________ router createand update a list of loyal members relatedto each router interface. A) broadcast B) unicast C) multicast D) noneof the above

Last Answer : multicast

Which file in MS-DOS contains internal commands that are loaded during Booting process? 1) IO.SYS 2) MSDOS.SYS 3) COMMAND.COM 4) CONFIG.SYS

Description : Which file in MS-DOS contains internal commands that are loaded during Booting process? 1) IO.SYS 2) MSDOS.SYS 3) COMMAND.COM 4) CONFIG.SYS

Last Answer : 4) CONFIG.SYS

After booting process which file executes automatically 1) config.sys 2) command.com 3) autoexec.bat 4) io.sys

Description : After booting process which file executes automatically 1) config.sys 2) command.com 3) autoexec.bat 4) io.sys

Last Answer : 3) autoexec.bat

Which file in MS-DOS contains internal commands that are loaded during Booting process? 1 IO.SYS 2 MSDOS.SYS 3 COMMAND.COM 4 CONFIG.SYS

Description : Which file in MS-DOS contains internal commands that are loaded during Booting process? 1 IO.SYS 2 MSDOS.SYS 3 COMMAND.COM 4 CONFIG.SYS

Last Answer : 4 CONFIG.SYS

After booting process which file executes automatically 1 config.sys 2 command.com 3 autoexec.bat 4 io.sys

Description : After booting process which file executes automatically 1 config.sys 2 command.com 3 autoexec.bat 4 io.sys

Last Answer : 3 autoexec.bat

In indication signal for a handshake form the DCE to the DTE in response to an active condition for the request to send a signal. A. Data transmission B. Clear to send C. Receive data D. Data set ready

Description : In indication signal for a handshake form the DCE to the DTE in response to an active condition for the request to send a signal. A. Data transmission B. Clear to send C. Receive data D. Data set ready

Last Answer : B. Clear to send

How much is my glenfield model 30a serial # 20175143 worth?

Description : How much is my glenfield model 30a serial # 20175143 worth?

Last Answer : According to a couple searches the value should fall in the $275 - $375 range depending on condition.

Info on a Brunswick Balke Collender Pool Table Serial # G898P?

Description : Info on a Brunswick Balke Collender Pool Table Serial # G898P?

Last Answer : What kind of information are you looking for? If you are thinking of selling it and you want a price, check with these people here > http://brunswickbalkecollender.com/contact-us-2.html

What year is my Winchester model 1400 shotgun with serial # 106833?

Description : What year is my Winchester model 1400 shotgun with serial # 106833?

Last Answer : The Model 1400 (affectionately called the Mark I - my note) made its first appearance in 1964 using the Model 1200 slide action of a rotating, locking lug bolt and a gas valve system. In 1966, the Model 1400 was made available in with the new Winchester recoil reduction system.

Which symbol is used to separate more than one command in the same command line? A. $ B. # C. : D. ;

Description : Which symbol is used to separate more than one command in the same command line? A. $ B. # C. : D. ;

Last Answer : D. ;

A protocol is a set of rules governing a time sequence of events that must take place a. between peers b. between an interface c. between modems d. across an interface

Description : A protocol is a set of rules governing a time sequence of events that must take place a. between peers b. between an interface c. between modems d. across an interface

Last Answer : between peers

------------------- is a set of rules governing the format and meaning of the packets, or messages that are exchanged by the peer entities within a layer. a. Interface b. Reference model c. Protocol d. None of these

Description : ------------------- is a set of rules governing the format and meaning of the packets, or messages that are exchanged by the peer entities within a layer. a. Interface b. Reference model c. Protocol d. None of these

Last Answer : c. Protocol

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

. In SQL, which command(s) is(are) usedto recompilea storedfunction? A. SET FUNCTION B. SET STORED FUNCTION C. ALTER FUNCTION D. All of theabove E. None of the above

Description : . In SQL, which command(s) is(are) usedto recompilea storedfunction? A. SET FUNCTION B. SET STORED FUNCTION C. ALTER FUNCTION D. All of theabove E. None of the above

Last Answer : ALTER FUNCTION

In SQL, the command(s) is (are)used tocreate an index for atable or cluster A. CREATE INDEX B. MODIFY INDEX C. SET INDEX TO FILE D. All of theabove E. None of the above

Description : In SQL, the command(s) is (are)used tocreate an index for atable or cluster A. CREATE INDEX B. MODIFY INDEX C. SET INDEX TO FILE D. All of theabove E. None of the above

Last Answer : CREATE INDEX

Your company has a LAN in its downtown officeandhas now set upa LAN inthe manufacturing plant inthe suburbs. Toenable everyoneto sharedata and resources between the two LANs, what type of device(s) are neededto connect them? Choose the most correct answer. A. Modem B. Cable C. Hub D. Router

Description : Your company has a LAN in its downtown officeandhas now set upa LAN inthe manufacturing plant inthe suburbs. Toenable everyoneto sharedata and resources between the two LANs, what type of device(s) are neededto connect them? Choose the most correct answer. A. Modem B. Cable C. Hub D. Router

Last Answer : Router

Is 56 cm greater or 56000 km greater?

Description : Is 56 cm greater or 56000 km greater?

Last Answer : The second one.

Are 56 cm bigger than 56000 km?

Description : Are 56 cm bigger than 56000 km?

Last Answer : 56000 km is vastly greater than 56 cm

The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Description : The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Last Answer : D. Data terminal equipment (DTE)

Two people abi and krish invested in a business with 7 lakh and 8 lakh rupees respectively. They agree that 46% of the profit should be divided equally among them and rest is divided between them according to their investment. If krish got Rs. 2100 more than abi, Then the total profit is, A) 55000 B) 56000. C) 58333 D) None

Description : Two people abi and krish invested in a business with 7 lakh and 8 lakh rupees respectively. They agree that 46% of the profit should be divided equally among them and rest is divided between them according to their ... more than abi, Then the total profit is, A) 55000 B) 56000. C) 58333 D) None

Last Answer : Answer: C)  Ratio of profit abi and krish is,  =>7:8  46% of then profit should be divided equally among them, remaining share is 54% of x  Abi share =54/100 * x * 7/15  Krish share =54/100 * x* 8/15  54/100 * x * 8/15 - 54/100 * x* 7/15 =2100  X =58333

In an election, candidate A got 40% of the total valid votes. If 55% of the total votes were declared invalid and the total numbers of votes is 280000, find the number of valid vote polled in favour of candidate. a) 32500 b) 56000 c) 35700 d) 50400 e) 29800

Description : In an election, candidate A got 40% of the total valid votes. If 55% of the total votes were declared invalid and the total numbers of votes is 280000, find the number of valid vote polled in favour of candidate. a) 32500 b) 56000 c) 35700 d) 50400 e) 29800

Last Answer : Answer: D Total number of invalid votes = 55 % of 280000  = 55/100 280000  = 15400000/100  = 154000 Total number of valid votes 280000 - 154000 = 126000 Percentage of votes polled in favour of candidate ... favour of candidate A = 40 % of 126000  = 40/100 126000  = 5040000/100  = 50400

What is a Serial Peripheral Interface (SPI) in Arduino?

Description : What is a Serial Peripheral Interface (SPI) in Arduino?

Last Answer : Serial Peripheral Interface (SPI) in Arduino is a synchronous communication protocol used to transfer data between microcontrollers and peripheral devices.

The system unit of a personal computer typically contains all of the following except: A) Microprocessor B) Disk controller C) Serial interface D) Modem

Description : The system unit of a personal computer typically contains all of the following except: A) Microprocessor B) Disk controller C) Serial interface D) Modem

Last Answer : Answer : D

________ is a high-speed real-time interface for serial bus and it has data transfer up to 400 Mbps. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Description : ________ is a high-speed real-time interface for serial bus and it has data transfer up to 400 Mbps. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Last Answer : B. Fire wire

__________ is an interface for connecting eight or more data wires. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Description : __________ is an interface for connecting eight or more data wires. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Last Answer : C. Parallel Port

An interface that provides I/O transfer of data directly to and form the memory unit and peripheral is termed as________ A. DDA B. Serial interface C. Direct Memory Access (DMA) D. None of the Above

Description : An interface that provides I/O transfer of data directly to and form the memory unit and peripheral is termed as________ A. DDA B. Serial interface C. Direct Memory Access (DMA) D. None of the Above

Last Answer : C. Direct Memory Access (DMA)

Printer attached on: a) Interface Port b) Serial Port c) Parallel Port d) SCSI e) None of These

Description : Printer attached on: a) Interface Port b) Serial Port c) Parallel Port d) SCSI e) None of These

Last Answer : c) Parallel Port

The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Description : The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Last Answer : d. Modem

The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Description : The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Last Answer : d. Modem

How many clock pulses are required to output a 4-bit number in serial form?

Description : How many clock pulses are required to output a 4-bit number in serial form?

Last Answer : Four.

In a relational database, this is a data structure that organizes the information about a single topic into rows and columns. 1) Block 2) Record 3) Tuple 4) Table 5) Command line interface

Description : In a relational database, this is a data structure that organizes the information about a single topic into rows and columns. 1) Block 2) Record 3) Tuple 4) Table 5) Command line interface

Last Answer : Answer :4

Point out the wrong statement : A. Full virtualization requires that the host operating system provide a virtual machine interface for the guest operating system and that the guest access hardware through that host VM B. Guest operating systems in full virtualization systems are generally faster than other virtualization schemes C. A process virtual machine instantiates when a command begins a process D. All of the above

Description : Point out the wrong statement : A. Full virtualization requires that the host operating system provide a virtual machine interface for the guest operating system and that the guest access hardware through ... A process virtual machine instantiates when a command begins a process D. All of the above

Last Answer : Full virtualization requires that the host operating system provide a virtual machine interface for the guest operating system and that the guest access hardware through that host VM

Point out the wrong statement : A. Full virtualization requires that the host operating system provide a virtual machine interface for the guest operating system and that the guest access hardware through that host VM B. Guest operating systems in full virtualization systems are generally faster than other virtualization schemes C. A process virtual machine instantiates when a command begins a process D. All of the above

Description : Point out the wrong statement : A. Full virtualization requires that the host operating system provide a virtual machine interface for the guest operating system and that the guest access hardware through ... A process virtual machine instantiates when a command begins a process D. All of the above

Last Answer : Full virtualization requires that the host operating system provide a virtual machine interface for the guest operating system and that the guest access hardware through that host VM

Point out the wrong statement. a) Full virtualization requires that the host operating system provide a virtual machine interface for the guest operating system and that the guest access hardware through that host VM b) Guest operating systems in full virtualization systems are generally faster than other virtualization schemes c) A process virtual machine instantiates when a command begins a process d) All of the mentioned

Description : Point out the wrong statement. a) Full virtualization requires that the host operating system provide a virtual machine interface for the guest operating system and that the guest access hardware ... A process virtual machine instantiates when a command begins a process d) All of the mentioned

Last Answer : Full virtualization requires that the host operating system provide a virtual machine interface for the guest operating system and that the guest access hardware through that host VM

How many access lists are allowed per interface? * One per port, per protocol * Two per port, per protocol * Unlimited * Router interface +1 per port.

Description : How many access lists are allowed per interface? * One per port, per protocol * Two per port, per protocol * Unlimited * Router interface +1 per port.

Last Answer : Correct answer: A Only one access list is allowed per interface. An access list must have conditions that test true for all packets that use the access list.

A storage device whe3re the access time is depended upon the location of the data is a. Random access b. Serial access c. Sequential access d. Transaction access

Description : A storage device whe3re the access time is depended upon the location of the data is a. Random access b. Serial access c. Sequential access d. Transaction access

Last Answer : Serial access

A kind of serial dot-matrix printer that forms characters with magnetically-charged ink sprayed dots is called a. Laser printer b. Ink-jet printec. Drum printer d. Chan printerr

Description : A kind of serial dot-matrix printer that forms characters with magnetically-charged ink sprayed dots is called a. Laser printer b. Ink-jet printer c. Drum printer d. Chan printer

Last Answer : Ink-jet printer

What is the minimum number of wires needed to send data over a serial communication link layer? a. 1 b. 2 c. 4 d. 6 e. none of above

Description : What is the minimum number of wires needed to send data over a serial communication link layer? a. 1 b. 2 c. 4 d. 6 e. none of above

Last Answer : 2

Which data communication method is used to transmit the data over a serial communication link? a. simplex b. half-duplex c. full-duplex d. b and c e. None of above

Description : Which data communication method is used to transmit the data over a serial communication link? a. simplex b. half-duplex c. full-duplex d. b and c e. None of above

Last Answer : full-duplex

While there is (are) only _____ way(s) to send paralleldata, there is (are) three subclass(es) of serial transmission. A) one; two B) two; three C) one; three D) none of the above

Description : While there is (are) only _____ way(s) to send paralleldata, there is (are) three subclass(es) of serial transmission. A) one; two B) two; three C) one; three D) none of the above

Last Answer : one; three