_______ is a standard developed by ANSI  for fiber-optic networks.

1 Answer

Answer :

SONET

Related questions

Description : A popular light wavelength fiber-optic cable is

Last Answer : 1.3 micrometer

Description : Which type of fiber-optic cable is the most widely used?

Last Answer : multimode step-index

Description : Which type of fiber-optic cable has the least modal dispersion?

Last Answer : single-mode step index

Description : isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : SDH

Description : Developed an optical fiber with losses less that 2 dB/km

Last Answer : Kao and Bockham

Description : ANSI X.12 is a standard developed by a. American National Standard Institute b. International Standard Institute c. European Common Market d. United Nations Economic Commission for Europe

Last Answer : a. American National Standard Institute 

Description : The document standards for EDI were first developed by large business house during the 1970s and are now under the control of the following standard organisation: (A) ISO (B) ANSI (C) ITU-T (D) IEEE

Last Answer : (B) ANSI

Description : Which of the following is not a common application of fiber-optic cable? a. Computer networks b. Long-distance telephone systems c. Closed circuit TV d. Consumer TV

Last Answer : d. Consumer TV

Description : Which of the following is not a common application of fiber-optic cable? ∙ a. Computer networks ∙ b. Long-distance telephone systems ∙ c. Closed circuit TV ∙ d. Consumer TV

Last Answer : d. Consumer TV

Description : It is caused by valence electrons in the silica material from which the fiber are manufactured.

Last Answer : ultraviolet absorption

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Last Answer : absorption loss

Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber.

Last Answer : Acceptance cone half-angle

Description : What phenomenon will result if the glass fiber is exposed to long periods of high humidity?

Last Answer : stress corrosion

Description : A single fiber can handle as many voice channels as.

Last Answer : a 1500-pair cable The term power budgeting refers to: Ans. the total power available minus the attenuation losses

Description : These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation.

Last Answer : constant-radius bending

Description : They were granted patents for scanning and transmitting television images through uncoated fiber cables

Last Answer : Baird and Hansel

Description : They proposed a new communication medium using cladded fiber cables.

Last Answer : Kao and Bockham

Description : He coined the term “fiber optics” in 1956.

Last Answer : Kapany

Description : Approximately what is the frequency limit of the optical fiber?

Last Answer : 40 GHz

Description : _______ refers to the structure or format of the data, meaning the order in which they are presented.

Last Answer : Semantics

Description : The process of decaying from one energy level to another energy level is called _______

Last Answer : Spontaneous emission

Description : A _______ is a three-layer device that handles packets based on their logical addresses

Last Answer : router

Description : In a star-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is the collision point.

Last Answer : a passive hub

Description : A _______ is a connecting device that operates in the physical and data link layers of the Internet model.

Last Answer : bridge

Description : A repeater is a connecting device that operates in the _______ layer of the Internet model.

Last Answer : physical

Description : Bluetooth is a _______ technology that connects devices (called gadgets) in a small area

Last Answer : Wireless LAN

Description : IEEE has defined the specifications for a wireless LAN, called _______, which covers the physical and data link layers.

Last Answer : . IEEE 802.11

Description : In IPv6, when a datagram needs to be discarded in a congested network, the decision is based on the _______ field in the base header.

Last Answer : priority

Description : Congestion in a network or internetwork occurs because routers and switches have _______

Last Answer : queues

Description : TELNET is an abbreviation for _______

Last Answer : Terminal Network

Description : Message _______ means that the receiver is ensured that the message is coming from the intended sender, not an imposter

Last Answer : authentication

Description : _______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T.

Last Answer : ATM

Description : The service are in standard AM broadcast is described as ______ if there is no fading of signal.

Last Answer : Primary

Description : It involves converting standard logic levels to a form more suitable to telephone transmission lines

Last Answer : igital line encoding

Description : The service are in standard AM broadcast is described as ______ if there is no fading of signal.

Last Answer : Primary

Description : n digital modulation, it is similar to standard amplitude modulation except there is only two amplitudes possible.

Last Answer : amplitude shift keying

Description : Who developed standards for the OSI reference model? A. ISO B. ANSI C. IEEE D. ACM

Last Answer : A. ISO

Description : Who developed standards for the OSI reference model? a. ISO - International Standards Organization b. ANSI - American National Standards Institute c. IEEE - Institute of Electrical and Electronics Engineers d. ACM - Association for Computing Machinery

Last Answer : a. ISO - International Standards Organization

Description : Fiber optic cable operates near _______ frequencies. A. 800 THz B. 20 MHz C. 200 MHz D. 2 GHz

Last Answer : A. 800 THz

Description : The HFC network uses _______ cable. A) twisted-pair B) coaxial C) fiber-optic D) acombination of (b) and (c)

Last Answer : fiber-optic

Description : The local loop has _______ cablethat connects the subscriber telephonetothe nearest end office. A) twisted-pair B) coaxial C) fiber-optic D) none of the above

Last Answer : twisted-pair

Description : In a fiber-optic cable, the signal is propagatedalong theinner core by _______. A) reflection B) refraction C) modulation D) none of the above

Last Answer : reflection

Description : 802.3 is the standard for 10BASE5 Ethernet that uses ___________ cable as shared medium. A. Twisted pair cable B. Coaxial cable C. Fiber optic cable D. None of the above 

Last Answer : B. Coaxial cable 

Description : When a key is pressed on the keyboard, which standard is used for converting the keystroke into the corresponding bits? A) ANSI B) ASCII C) EBCDIC D) ISO

Last Answer : Answer : A

Description : When a key is pressed on the keyboard,which standard is used for converting the keystroke into the corresponding bits 1) ANSI 2) ASCII 3) EBCDIC 4) ISO

Last Answer : 1) ANSI

Description : When a key is pressed on the keyboard,which standard is used for converting thekeystroke into the corresponding bits 1 ANSI 2 ASCII 3 EBCDIC 4 ISO

Last Answer : 1 ANSI

Description : The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___

Last Answer : is horizontal

Description : It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power

Last Answer : directive gain

Description : The property of interchangeability for the transmitting and receiving operations is known as ____

Last Answer : reciprocity