Description : Fiber-optic cables with attenuation of 1.8, 3.4, 5.9 and 18 dB are linked together. The total loss is ∙ A. 7.5 dB ∙ B. 19.8 dB ∙ C. 29.1 dB ∙ D. 650 dB
Last Answer : C. 29.1 dB
Description : Fiber-optic cables with attenuations of 1.8, 3.4, 5.9, and 18 dB are linked together. The total loss is ∙ a. 7.5 dB ∙ b. 19.8 dB ∙ c. 29.1 dB ∙ d. 650 dB
Last Answer : ∙ c. 29.1 dB
Description : Fiber optic cables operate at frequencies near ∙ a. 20 MHz ∙ b. 200 MHz ∙ c. 2G Hz ∙ d. 800 THz
Last Answer : ∙ d. 800 THz
Description : The use of solitons on fiber-optic cables is: a. common b. experimental c. obsolete d. not possible
Last Answer : b. experimental
Description : Photodiodes used as fiber optic directors are ∙ a. Unbiased to generate a voltage same as a solar cell ∙ b. Forward bias ∙ c. Reversed bias ∙ d. Thermoelectrically cooled
Last Answer : ∙ c. Reversed bias
Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss
Last Answer : B. absorption loss
Description : They proposed a new communication medium using cladded fiber cables. ∙ A. Kao and Bockham ∙ B. Maiman, Kao and Bockham ∙ C. Kapron, Keck and Maurer ∙ D. Maiman and Schawlow
Last Answer : ∙ A. Kao and Bockham
Description : They were granted patents for scanning and transmitting television images through uncoated fiber cables. ∙ A. Baird and Hansel ∙ B. Bockham and Kao ∙ C. Kapron and Keck
Last Answer : A. Baird and Hansel
Description : Calculate the total rise time for a fiber-optic system if the transmitter, receiver, and cable each have a rise time of 50 nanoseconds.
Last Answer : 86.6 nanoseconds
Description : Which type of fiber-optic cable is the most widely used? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded index ∙ D. multimode graded index
Last Answer : B. multimode step-index
Description : Which of the following is not a major benefit of a fiber-optic cable? ∙ A. immunity from interference ∙ B. no electrical safety problems ∙ C. excellent data security ∙ D. lower cost
Last Answer : ∙ D. lower cost
Description : The core of fiber-optic cable is surrounded by ∙ A. wire braid shield ∙ B. Keviar ∙ C. cladding ∙ D. plastic insulation
Last Answer : ∙ C. cladding
Description : The core of a fiber-optic cable is made of ∙ A. air ∙ B. glass ∙ C. diamond ∙ D. quartz
Last Answer : B. glass
Description : Which of the following is not a common type of fiber-optic cable? ∙ A. single-mode step-index ∙ B. multimode graded-index ∙ C. single-mode graded-index ∙ D. multimode step-index
Last Answer : . single-mode graded-index
Description : The operation of a fiber-optic cable is based on the principle of ∙ A. refraction ∙ B. reflection ∙ C. dispersion ∙ D. absorption
Last Answer : A. refraction
Description : Which of the following is not a common application of fiber-optic cable? ∙ A. computer networks ∙ B. long-distance telephone system ∙ C. closed-circuit TV ∙ D. consumer TV
Last Answer : ∙ D. consumer TV
Description : A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer
Last Answer : B. 1.3 micrometer
Description : Which type of fiber optic cable is best for very high speed data? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index
Last Answer : A. single-mode step-index
Description : Which type of fiber-optic cable has the least modal dispersion? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index
Description : A fiber-optic cable has a loss of 15 dB/km. The attenuation in a cable 1000 ft. long is ∙ A. 4.57 dB ∙ B. 9.3 dB ∙ C. 24 dB ∙ D. 49.2 dB
Last Answer : A. 4.57 dB
Description : The term single mode and multimode are best described as ∙ A. a number of fibers placed into fiber-optic cable ∙ B. the number of voice channels each fiber can support ∙ C. the number of wavelengths each fiber can support ∙ D. the index number
Last Answer : C. the number of wavelengths each fiber can support
Description : Which light emitter is preferred for high-speed data in a fiber-optic system? ∙ A. incandescent ∙ B. LED ∙ C. neon ∙ D. laser
Last Answer : D. laser
Description : Most fiber optic light sources emit light in which spectrum? ∙ A. visible ∙ B. infrared ∙ C. ultraviolet ∙ D. X-ray
Last Answer : B. infrared
Description : . The product of the bit rate and distance of a fiber-optic system is 2 Gbits-km/s. What is the maximum rate at 5 km? ∙ A. 100 Mbits/s ∙ B. 200 Mbits/s ∙ C. 400 Mbits/s ∙ D. 1000 Gbits/s
Last Answer : C. 400 Mbits/s
Description : . Which fiber-optic system is better? ∙ A. 3 repeaters ∙ B. 8 repeaters ∙ C. 11 repeaters ∙ D. 20 repeaters
Last Answer : A. 3 repeaters
Description : SONET stands for ∙ a. System Optical Network ∙ b. Synchronous Optical Network ∙ c. Silica Optic Network ∙ d. System Optical Fiber Net
Last Answer : ∙ b. Synchronous Optical Network
Description : Which fiber-optic system is better? ∙ a. 3 repeaters ∙ b. 8 repeaters ∙ c. 11 repeaters ∙ d. 20 repeaters
Last Answer : a. 3 repeaters
Description : The product of the bit rate and distance of a fiber-optic system is 2 Gbits km/s. What is the maximum rate at 5 km? ∙ a. 100 Mbits/s ∙ b. 200 Mbits/s ∙ c. 400 Mbits/s ∙ d. 1000 Gbits/s
Last Answer : c. 400 Mbits/s
Description : Most fiber-optic light sources emit light in which spectrum? ∙ a. Visible ∙ b. Infrared ∙ c. Ultraviolet ∙ d. X-ray
Last Answer : ∙ b. Infrared
Description : Which light emitter is preferred for high speed data in a fiber-optic system ∙ a. Incandescent ∙ b. LED ∙ c. Neon ∙ d. Laser
Last Answer : ∙ d. Laser
Description : . A fiber-optic cable has a loss of 15 dB/km. The attenuation in a cable, 100 ft long is ∙ a. 4.57 dB ∙ b. 9.3 dB ∙ c. 24 dB ∙ d. 49.2 dB
Last Answer : ∙ a. 4.57 dB
Description : Which type of fiber-optic cable has the least modal dispersion? ∙ a. Single mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index
Last Answer : ∙ a. Single mode step-index
Description : Which type of fiber-optic cable is the best for very high speed data? ∙ a. Single-mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index
Last Answer : a. Single-mode step-index
Description : Which type of fiber optic cable is most widely used? ∙ a. Single-mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index
Description : A popular light wavelength in fiber-optic cable is ∙ a. 0.7 um ∙ b. 1.3 um ∙ c. 1.5 um ∙ d. 1.8 um
Last Answer : b. 1.3 um
Description : Which of the following is not a major benefit of fiber-optic cable? ∙ a. Immunity from interference ∙ b. No electrical safety problems ∙ c. Excellent data security ∙ d. Lower cost
Last Answer : b. No electrical safety problems
Description : The core of a fiber optic is surrounded by ∙ a. Wire braid shield ∙ b. Kevlar ∙ c. Cladding ∙ d. Plastic insulation
Last Answer : ∙ c. Cladding
Description : The core of a fiber optic cable is made of ∙ a. Air ∙ b. Glass ∙ c. Diamond ∙ d. Quartz
Last Answer : b. Glass
Description : Which of the following is not a common type of fiber-optic cable? ∙ a. Single-mode step-index ∙ b. Multimode graded-index ∙ c. Single-mode graded-index ∙ d. Multimode step-index
Last Answer : ∙ a. Single-mode step-index
Description : The operation of the fiber-optic cable is based on the principle of ∙ a. Refraction ∙ b. Reflection ∙ c. Dispersion ∙ d. Absorption
Last Answer : ∙ b. Reflection
Description : Which of the following is not a common application of fiber-optic cable? ∙ a. Computer networks ∙ b. Long-distance telephone systems ∙ c. Closed circuit TV ∙ d. Consumer TV
Last Answer : d. Consumer TV
Description : Using fiber-optic cable in a telephone system except for the connection to the subscriber’s phone is called: a. FDDI b. FTTC c. FITL d. SONET
Last Answer : b. FTTC
Description : Typically, repeaters are not required for fiber-optic cable lengths up to: a. 1000 miles b. 100 miles c. 100 km d. 10 km
Last Answer : c. 100 km
Description : The loss in single-mode fiber-optic cable due to a connector is about: a. 0.02 dB b. 0.2 dB c. 1 dB d. 3 dB
Last Answer : b. 0.2 dB
Description : The loss in single-mode fiber-optic cable due to a splice is about: a. 0.02 dB b. 0.2 dB c. 1 dB d. 3 dB
Last Answer : a. 0.02 dB
Description : The loss in single-mode fiber-optic cable due to the glass is about: a. 40 dB per km b. 4 db per km c. 0.4 dB per km d. zero loss
Last Answer : c. 0.4 dB per km
Description : Fiber-optic cable cannot be used: a. in an explosive environment b. to connect a transmitter to an antenna c. to isolate a medical patient from a shock hazard d. none of the above
Last Answer : b. to connect a transmitter to an antenna
Description : Is the interference coming from other communications channels? A. Jitter B. Crosstalk C. RFI D. EMI
Last Answer : B. Crosstalk
Description : ______ cables carry data signals in the form of light. A) Coaxial B) Fiber-optic C) Twisted-pair D) none of the above
Last Answer : Fiber-opti
Description : Optic fibres are used in place of wire cables because (1) they generate strong magnetic fields (2) they do not generate magnetic fields (3) they do not require boosting (4) they are more economical
Last Answer : they do not generate magnetic fields