In what manner are current-measuring instruments connected to a circuit?

In what manner are current-measuring instruments  connected to a circuit?
by

1 Answer

Answer :

In series.
by

Related questions

In what manner are voltage-measuring instruments connected to the circuit to be measured?

Description : In what manner are voltage-measuring instruments connected to the circuit to be measured?

Last Answer : In parallel.

Current measuring instruments must always be connected in _____________. A. series with a circuit B. parallel with a circuit C. series-parallel with a circuit D. delta with the shunt

Description : Current measuring instruments must always be connected in _____________. A. series with a circuit B. parallel with a circuit C. series-parallel with a circuit D. delta with the shunt

Last Answer : Answer: A

Without strapping, the resonant cavities of a hole-and-slot anode are connected in what manner?

Description : Without strapping, the resonant cavities of a hole-and-slot anode are connected in what manner?

Last Answer : Series.

Which of the following statements regarding the use of a current measuring instrument is correct? A. It must be connected in series with the circuit. B. You should always start with the lowest range until a suitable reading is obtained. C. The indicating needle is deflected from left to right regardless of polarity. D. An external shunt is generally utilized where current is less than 10 amperes.

Description : Which of the following statements regarding the use of a current measuring instrument is correct? A. It must be connected in series with the circuit. B. You should always start with the lowest range ... of polarity. D. An external shunt is generally utilized where current is less than 10 amperes.

Last Answer : Answer: A

List out any four effects of electric current used in measuring instruments & write name of meter working on it.

Description : List out any four effects of electric current used in measuring instruments & write name of meter working on it.

Last Answer : Effects of Electric Current used in measuring instruments:  1. Magnetic Effect: PMMC and Moving Iron type Ammeters, voltmeter and Dynamometer type wattmeters etc.  2. Electromagnetic induction ... . Electrostatic effect: Voltmeters.  5. Hall Effect: Flux meter, Poynting vector wattmeter.

Which of the instruments listed should always be connected in series with a circuit? A. Ammeter B. Megohmmeter C. Wattmeter D. Voltmeter

Description : Which of the instruments listed should always be connected in series with a circuit? A. Ammeter B. Megohmmeter C. Wattmeter D. Voltmeter

Last Answer : Answer: A

What type of device is used to extend the current measuring capability of electrodynamic wattmeters?

Description : What type of device is used to extend the current measuring capability of electrodynamic wattmeters?

Last Answer : Current transformers.

Name the instruments used for measuring each of the following: (i) Pressure (ii) Voltage (iii) Purity of milk (iv) Temperature (v) Velocity of wind

Description : Name the instruments used for measuring each of the following: (i) Pressure (ii) Voltage (iii) Purity of milk (iv) Temperature (v) Velocity of wind

Last Answer : Answers: (i). Barometer (ii). Voltmeter (iii). Lactometer (iv). Thermometer (v). Anemometer

On all instruments like measuring cylinder, pipette and burette, readings are always taken at the bottom of the meniscus of liquid. This is not true for liquids like A. Oil B. Ink C. Mercury D. Seawater

Description : On all instruments like measuring cylinder, pipette and burette, readings are always taken at the bottom of the meniscus of liquid. This is not true for liquids like A. Oil B. Ink C. Mercury D. Seawater

Last Answer : Mercury

What are the possible errors in induction (energy meter) measuring instruments?

Description : What are the possible errors in induction (energy meter) measuring instruments?

Last Answer : a. Phase error: Field flux in induction meter does not lag 90° behind the supply voltage due to its resistance. This can be adjusted by copper shading rings, which are placed at the central limb of the ... to prevent rotation, when one of the holes comes under one of the pole of the shunt magnet.

What are the operating principles of electrical measuring instruments?

Description : What are the operating principles of electrical measuring instruments?

Last Answer : a. Magnetic effect. b. Electro dynamic effect. c. Electro magnetic effect. d. Thermal effect. e. Chemical effect. f. Electro static effect.

What are the classifications of electrical measuring instruments?

Description : What are the classifications of electrical measuring instruments?

Last Answer : a. Absolute instruments. These instruments give the value of the quantity to be measure in terms of the constant of the instrument and their deflection only. There is no any calibrated scale. b. ... to be measured with the deflection of needle or pointer of that meter over a calibrated scale.

Vibration measuring instruments are classified on the basis of ____________. (A) contact between the vibrating system and measuring instrument (B) the requirement of power source (C) method of measurements (D) all of the above

Description : Vibration measuring instruments are classified on the basis of ____________. (A) contact between the vibrating system and measuring instrument (B) the requirement of power source (C) method of measurements (D) all of the above

Last Answer : (D) all of the above

The instruments which are used to measure the ___________ of a vibrating body are called vibration measuring instrument. (A) displacement (B) velocity (C) acceleration (D) all of the above

Description : The instruments which are used to measure the ___________ of a vibrating body are called vibration measuring instrument. (A) displacement (B) velocity (C) acceleration (D) all of the above

Last Answer : (D) all of the above

Which of the following is an example of laminar flow? (A) Underground flow (B) Flow past tiny bodies (C) Flow of oil in measuring instruments (D) All of these

Description : Which of the following is an example of laminar flow? (A) Underground flow (B) Flow past tiny bodies (C) Flow of oil in measuring instruments (D) All of these

Last Answer : Answer: Option D

Music wires are concerned with a. musical instruments b. tuning forks c. springs d. measuring instruments

Description : Music wires are concerned with a. musical instruments b. tuning forks c. springs d. measuring instruments

Last Answer : c. springs

Define calibration of instruments. Explain why calibration is needed for measuring instruments.

Description : Define calibration of instruments. Explain why calibration is needed for measuring instruments.

Last Answer : Calibration - It is a process of estimating the value of a quantity by comparing that quantity with a standard quantity. Need of calibration: - Calibration defines the accuracy and quality ... aim of calibration is to minimize any measurement uncertainty by ensuring the accuracy of test equipment.

Compare floor inspection and centralized inspection on the basis of (i) Definition. (ii) Measuring instruments used (iii) Suitability. (iv) Mode of inspection.

Description : Compare floor inspection and centralized inspection on the basis of (i) Definition. (ii) Measuring instruments used (iii) Suitability. (iv) Mode of inspection.

Last Answer : Parameters Floor Inspection Centralized Inspection Definition. Inspection is done at the place where the part is made or assembled is called floor inspection. The inspection is done ... Mode of inspection. Online inspection is possible Offline inspection needs to be done.

List the classification of temperature measuring instruments with one example each.

Description : List the classification of temperature measuring instruments with one example each.

Last Answer : Classification of temperature measuring instruments with one eg 

Enlist the names of different pressure measuring instruments.

Description : Enlist the names of different pressure measuring instruments.

Last Answer : Pressure measuring instruments: LVDT, bellows pressure gauge, diaphragm pressure gauge, strain gauge, Force balance pressure gauge (Dead weight pressure gauge) Bourdon tube pressure gauge, Mc Leod gauge etc.

Write the names of different temperature measuring instruments.

Description : Write the names of different temperature measuring instruments.

Last Answer : Temperature measuring instruments: RTD, thermocouple, thermistor, mercury in-glass thermometer, bimetallic thermometer, radiation pyrometer, optical pyrometer

State the purpose of calibration of measuring instruments. Explain the procedure of calibration of D.C. voltmeter by using D.C. potentiometer.

Description : State the purpose of calibration of measuring instruments. Explain the procedure of calibration of D.C. voltmeter by using D.C. potentiometer.

Last Answer : Purpose of calibration : Calibration is the process of evaluating and adjusting the precision and accuracy of measuring equipment. Proper calibration of an instrument allows people to have a safe ... calibration curve can be drawn by plotting the percentage error against the measured voltages. 

Describe different types of errors in analog measuring instruments.

Description : Describe different types of errors in analog measuring instruments. 

Last Answer : Types of Errors in Analog Measuring Instruments: A) Gross error: These are due to mistakes on the part of person using the instrument. B) Systematic Error: It has three sub types as ... multiplying factor. C) Random error: These persist even after gross and systematic errors are removed.

Electrical Measuring Instruments

Description : Electrical Measuring Instruments

Last Answer : Electrical Measuring Instruments

calibration and the need of calibration for measuring instruments.

Description : calibration and the need of calibration for measuring instruments.

Last Answer : Calibration - It is a process of estimating the value of a quantity by comparing that quantity with a standard quantity.    Need of calibration: - Calibration defines the accuracy and ... aim of calibration is to minimize any measurement uncertainty by ensuring the accuracy of test equipment.

Explain the essential toques in analog type measuring instruments.

Description : Explain the essential toques in analog type measuring instruments.

Last Answer : List of torques in analog instruments:  1. Deflecting torque  2. Controlling / Restraining torque.  3. Damping torque.  1. Deflecting torque: To create deflection proportional to ... the speed higher will be the damping torque bringing the pointer to the equilibrium position quickly. 

State two purposes of calibration of measuring instruments.

Description : State two purposes of calibration of measuring instruments.

Last Answer : Purposes of calibration of measuring instruments: - The purpose of calibration is to ensure that readings of an instrument are consistent with other instruments. It is also important in determining the ... will need to be calibrated periodically to make sure it can function properly and safely. 

List three types of errors in measuring instruments. Give reasons of occurring for any one of them.

Description : List three types of errors in measuring instruments. Give reasons of occurring for any one of them.

Last Answer : Types of errors in measuring instruments:  A) Gross error: These are due to mistakes on the part of person using the instrument.  B) Systematic Error: i) Instrumental Error: These ... multiplying factor.  C) Random error: These persist even after gross and systematic errors are removed.

Define following terms related to measuring instruments: i) Sensitivity ii) Selectivity.

Description : Define following terms related to measuring instruments: i) Sensitivity ii) Selectivity.

Last Answer : i) Sensitivity: It is the ratio of the change in output signal to the change in input signal of quantity being measured.  ii) Selectivity: It is the term to describe fulfillment of the requirements of measurement by an instrument to be suitable for use in a given situation. 

Describe systematic errors in measuring instruments.

Description : Describe systematic errors in measuring instruments. 

Last Answer : Systematic errors: -  ➢ Instrumental Error: These errors are caused due to the mechanical structure of measuring instrument.  a) Inherent shortcomings of instruments: Instrument may read ... or electrostatic fields.  ➢ Observational Error: Parallax errors, incorrect multiplying factor. 

List any four effects employed in measuring instruments.

Description : List any four effects employed in measuring instruments.

Last Answer : Effects Employed in Measuring Instruments: 1. Magnetic Effect 2. Electromagnetic induction 3. Heating effect 4. Electrostatic effect 5. Hall Effect 

The function of input attenuators in measuring instruments, like VTVM and CRO, is to

Description : The function of input attenuators in measuring instruments, like VTVM and CRO, is to (a) Increase the input impedance (b) Attenuate the frequency range (c) Attenuate the input signal amplitude without altering the frequency contents (d) Attenuate the input impedance

Last Answer : The function of input attenuators in measuring instruments, like VTVM and CRO, is to Attenuate the input signal amplitude without altering the frequency contents

Moving iron instruments can be used for measuring

Description : Moving iron instruments can be used for measuring (1) Direct currents and voltages (2) Radio frequency currents (3) A.C currents and voltages (4) Both (a) and (c)

Last Answer : moving iron instruments areused to measure A.C curents &  voltages

Is an ammeter connected in series or in parallel with the circuit under test?

Description : Is an ammeter connected in series or in parallel with the circuit under test?

Last Answer : . In series.

How are synchro capacitors connected in a circuit?

Description : How are synchro capacitors connected in a circuit?

Last Answer : They are delta-connected across the stator windings.

A circuit has a source voltage of 100 volts and two 50-ohm resistors connected in series. If the reference point for this circuit is placed between the two resistors, what would be the voltage at the reference point?

Description : A circuit has a source voltage of 100 volts and two 50-ohm resistors connected in series. If the reference point for this circuit is placed between the two resistors, what would be the voltage at the reference point?

Last Answer : 50 volts.

How are circuits protections devices connected to the circuit they are intended to protect and why are they connected in this way?

Description : How are circuits protections devices connected to the circuit they are intended to protect and why are they connected in this way?

Last Answer : In series, so total current will be stopped when the device opens.

How is a series-type ohmmeter connected to the circuit being measured?

Description : How is a series-type ohmmeter connected to the circuit being measured?

Last Answer : The ohmmeter is connected in series with the resistance to be measured.

How is a voltmeter connected to the circuit to be measured?

Description : How is a voltmeter connected to the circuit to be measured?

Last Answer : In parallel.

Why will an ammeter be damaged if connected in parallel with the circuit to be measured?

Description : Why will an ammeter be damaged if connected in parallel with the circuit to be measured?

Last Answer : Since the ammeter has a small resistance compared to the load, it will have very high current if it is connected in parallel. This high current will damage the meter.

How is an ammeter connected to the circuit under test?

Description : How is an ammeter connected to the circuit under test?

Last Answer : In series.

If the ignition switch is placed in the ON position and all the engine instruments operate properly except the gas gauge, where would the fault probably be?

Description : If the ignition switch is placed in the ON position and all the engine instruments operate properly except the gas gauge, where would the fault probably be?

Last Answer : Between point (3) and the gas gauge tank unit ground.

Name two instruments used to analyze waveforms.

Description : Name two instruments used to analyze waveforms.

Last Answer : Oscilloscope and spectrum analyzer.

An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Description : An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Last Answer : Negative, positive

An instrument used for measuring the amount of current flowing in a circuit.

Description : An instrument used for measuring the amount of current flowing in a circuit.

Last Answer : ammeter

You are measuring the current in a circuit that is operated on an 18 V battery. The ammeter

Description : You are measuring the current in a circuit that is operated on an 18 V battery. The ammeter reads 40 mA. Later you notice the current has dropped to 20 mA. How much has the voltage changed? A.9 V B.900 mV C.0 V D.18 V

Last Answer : You are measuring the current in a circuit that is operated on an 18 V battery. The ammeter reads 40 mA. Later you notice the current has dropped to 20 mA. How much has the voltage changed? A.9 V B.900 mV C.0 V D.18 V

When measuring receiver sensitivity, what quantities must you add to the dBm reading obtained on the signal generator or test set?

Description : When measuring receiver sensitivity, what quantities must you add to the dBm reading obtained on the signal generator or test set?

Last Answer : Attenuations of the directional coupler and the connecting cable.

You determine receiver sensitivity by measuring the power level of what signal?

Description : You determine receiver sensitivity by measuring the power level of what signal?

Last Answer : Minimum discernible signal (mds).

When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Description : When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Last Answer : The capacitive and inductive characteristics of the test leads.

When measuring harmonic distortion, you set the signal generator to input a 15-kHz test signal. To what frequency should you set the wave analyzer?

Description : When measuring harmonic distortion, you set the signal generator to input a 15-kHz test signal. To what frequency should you set the wave analyzer?

Last Answer : 45 kHz.