On all instruments like measuring cylinder, pipette and burette, readings are always taken at the bottom of the meniscus of liquid. This is not true for liquids like A. Oil B. Ink C. Mercury D. Seawater

On all instruments like measuring cylinder, pipette and burette,

readings are always taken at the bottom of the meniscus of liquid. This is not

true for liquids like

A. Oil

B. Ink

C. Mercury

D. Seawater
by

1 Answer

Answer :

Mercury
by

Related questions

Hydrometer readings are corrected for: (A) Temperature correction (B) Meniscus correction (C) Dispersing agent correction (D) Temperature, meniscus and dispersing agent corrections

Description : Hydrometer readings are corrected for: (A) Temperature correction (B) Meniscus correction (C) Dispersing agent correction (D) Temperature, meniscus and dispersing agent corrections

Last Answer : Answer: Option D

Where is a liquid volume reading taken in relation to a meniscus?

Description : Where is a liquid volume reading taken in relation to a meniscus?

Last Answer : none

Assertion : In presence of ozone, mercury loses its meniscus and sticks to glasses. This is called tailing of mercury Reason: Tailing of mercury is du

Description : Assertion : In presence of ozone, mercury loses its meniscus and sticks to glasses. This is called tailing of mercury Reason: Tailing of mercury is du

Last Answer : Assertion : In presence of ozone, mercury loses its meniscus and sticks to glasses. This is called ... -I is not correct and Statement-II is correct

Zinc is most soluble in which of the following liquids? w) Water x) Alchohol y) Mercury z) Oil

Description : Zinc is most soluble in which of the following liquids? w) Water x) Alchohol y) Mercury z) Oil

Last Answer : ANSWER: Y -- MERCURY

What is a burette and how is it used ?

Description : What is a burette and how is it used ?

Last Answer : A burette is a uniform-bore glass tube with fine gradations and a stopcock at the bottom, used especially in laboratory procedures for accurate fluid dispensing and measurement. The burette ... is simultaneously occupied by the presences of a liquid measuring and transferring this derailment.

In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Description : In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for ... bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Last Answer : (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

Which of the following liquids has the least density? (1) Fresh water (2) Salt water (3) Petrol (4) Mercury

Description : Which of the following liquids has the least density? (1) Fresh water (2) Salt water (3) Petrol (4) Mercury

Last Answer : (3) Petrol Explanation: Gasoline or petrol is a transparent, petroleum-derived liquid that is used primarily as a fuel in internal Combustion engines. It consists mostly of organic compounds obtained by the fractional distillation of petroleum, enhanced with a variety of additives.

Which of the following liquids has the least density ? (1) Fresh water (2) Salt water (3) Petrol (4) Mercury

Description : Which of the following liquids has the least density ? (1) Fresh water (2) Salt water (3) Petrol (4) Mercury

Last Answer : Petrol

Which of the following is an example of laminar flow? (A) Underground flow (B) Flow past tiny bodies (C) Flow of oil in measuring instruments (D) All of these

Description : Which of the following is an example of laminar flow? (A) Underground flow (B) Flow past tiny bodies (C) Flow of oil in measuring instruments (D) All of these

Last Answer : Answer: Option D

Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Description : Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Last Answer : (A) Driving force for the vapour flow is the pressure drop

Current measuring instruments must always be connected in _____________. A. series with a circuit B. parallel with a circuit C. series-parallel with a circuit D. delta with the shunt

Description : Current measuring instruments must always be connected in _____________. A. series with a circuit B. parallel with a circuit C. series-parallel with a circuit D. delta with the shunt

Last Answer : Answer: A

Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the vapor pressure of "X" be when the volume above the liquid is 100 ml and the temperature 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Description : Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the ... 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Last Answer : ANSWER: Y -- 120 TORR

Electrostatic forces in high voltage circuits cause indicating instruments to give ____________. A. parallax readings B. highly intuitive readings C. highly accurate readings D. inaccurate readings

Description : Electrostatic forces in high voltage circuits cause indicating instruments to give ____________. A. parallax readings B. highly intuitive readings C. highly accurate readings D. inaccurate readings

Last Answer : Answer: D

In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Description : In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Last Answer : (D) All the above

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left Side .045 - .047, Bottom .045 - .041 Which of the f A. both the aft and foward bearings should be replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left Side .045 - .047 , Bottom .045 - .041 Which of the fo A. The aft bearing should be realigned or replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

The density of seawater is greater than that of fresh water. A boat will float: w) Higher in fresh water than in seawater x) Lower in fresh water than in seawater y) At the same level in both z) Any of the above, depending upon its shape

Description : The density of seawater is greater than that of fresh water. A boat will float: w) Higher in fresh water than in seawater x) Lower in fresh water than in seawater y) At the same level in both z) Any of the above, depending upon its shape

Last Answer : ANSWER: X -- LOWER IN FRESH WATER THAN IN SEAWATER

What pipette 8 ul would be on a P10?

Description : What pipette 8 ul would be on a P10?

Last Answer : The volume of the Gilson P10 pipette is 10 microlitres.

Why are the burrete and the pipette rinsed with their respective solutions before use?

Description : Why are the burrete and the pipette rinsed with their respective solutions before use?

Last Answer : The purpose is to delete any other impurities.

The specific gravity of the electrolyte in a lead-acid battery is measured by a _____________. A. gould plate B. titration pipette C. hydrometer D. litmus paper test

Description : The specific gravity of the electrolyte in a lead-acid battery is measured by a _____________. A. gould plate B. titration pipette C. hydrometer D. litmus paper test

Last Answer : Answer: C

Pick up the correct statement from the following: (A) In hydrometer method, weight Wd per ml of suspension is found directly (B) In pipette analysis, weight Wd per ml of suspension is found indirectly (C) In pipette analysis, weight Wd per ml of suspension is found directly (D) None of these

Description : Pick up the correct statement from the following: (A) In hydrometer method, weight Wd per ml of suspension is found directly (B) In pipette analysis, weight Wd per ml of suspension is found indirectly (C) In pipette analysis, weight Wd per ml of suspension is found directly (D) None of these

Last Answer : (C) In pipette analysis, weight Wd per ml of suspension is found directly

The hydrometer method of sedimentation analysis differs from the pipette analysis mainly in (A) The principle of test (B) The method of taking observations (C) The method of preparation of soil suspension (D) All of the above

Description : The hydrometer method of sedimentation analysis differs from the pipette analysis mainly in (A) The principle of test (B) The method of taking observations (C) The method of preparation of soil suspension (D) All of the above

Last Answer : (B) The method of taking observations

According to IS : 2720 - 1965, the composition of a dispersing solution used in pipette analysis for determining the size of particles, is (A) sodium-hexametaphosphate 33 g, sodium carbonate 7 g and distilled water one litre (B) sodium-hexametaphosphate 7 g, sodium carbonate 33 g and distilled water one litre (C) sodium-hexametaphosphate 23 g, sodium carbonate 17 g and distilled water one litre (D) None of these

Description : According to IS : 2720 - 1965, the composition of a dispersing solution used in pipette analysis for determining the size of particles, is (A) sodium-hexametaphosphate 33 g, sodium carbonate 7 g ... -hexametaphosphate 23 g, sodium carbonate 17 g and distilled water one litre (D) None of these

Last Answer : Answer: Option A

What Type of cylinder used to measure liquids?

Description : What Type of cylinder used to measure liquids?

Last Answer : Need answer

A drop of liquid assumes spherical shape because: (1) Intermolecular forces are strong in liquids (2) A sphere has the least surface area for a given volume (3) A sphere has the largest surface area for a given volume (4) Inter molecular forces are weak in liquids

Description : A drop of liquid assumes spherical shape because: (1) Intermolecular forces are strong in liquids (2) A sphere has the least surface area for a given volume (3) A sphere has the largest surface area for a given volume (4) Inter molecular forces are weak in liquids

Last Answer : (2) A sphere has the least surface area for a given volume Explanation: A drop of liquid assumes spherical shape because a sphere has the least surface area for a given volume.

The term "laminar flow" is most often associated with the description of: w) conduction of sound by waves x) current flow in transistors y) effects of viscosity of liquids z) passage of light rays through a liquid

Description : The term "laminar flow" is most often associated with the description of: w) conduction of sound by waves x) current flow in transistors y) effects of viscosity of liquids z) passage of light rays through a liquid

Last Answer : ANSWER: Y -- EFFECTS OF VISCOSITY OF LIQUIDS

The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Description : The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Last Answer : ANSWER: X -- HEAT OF VAPORIZATION

A drop of liquid assumes spherical shape because: (1) Intermolecular forces are strong in liquids (2) A sphere has the least surface area for a given volume (3) A sphere has the largest surface area for a given volume (4) Inter molecular forces are weak in liquids

Description : A drop of liquid assumes spherical shape because: (1) Intermolecular forces are strong in liquids (2) A sphere has the least surface area for a given volume (3) A sphere has the largest surface area for a given volume (4) Inter molecular forces are weak in liquids

Last Answer : A sphere has the least surface area for a given volume

Which of the following liquids is most viscous? (1) Oil (2) Milk (3) Water (4) petrol

Description : Which of the following liquids is most viscous? (1) Oil (2) Milk (3) Water (4) petrol

Last Answer : (1) Oil Explanation: Informally, viscosity is the quantity that describes a fluid's resistance to flow. It is dependent on temperature. Viscosity of the different fluids (in cP) is as follows: Edible Oil: 20 to 60; Milk: approximately 1.0; Water: 0.894; and Petrol: around 0.82 to 0.95 cP.

Which of the following liquids is most viscous? (1) Oil (2) Milk (3) Water (4) Petrol

Description : Which of the following liquids is most viscous? (1) Oil (2) Milk (3) Water (4) Petrol

Last Answer : Oil

Hygrometer is used for measuring the ------? A. Speed of sound B. Density of milk C. Humidity of air (Answer) D. Specific gravity of liquids E. None of these

Description : Hygrometer is used for measuring the ------? A. Speed of sound B. Density of milk C. Humidity of air (Answer) D. Specific gravity of liquids E. None of these

Last Answer : C. Humidity of air (Answer)

The Richter Scale is used for measuring of – A) Density of liquids B) Speed of Aeroplane C) Intensity of earthquakes D) Depth of mines.

Description : The Richter Scale is used for measuring of – A) Density of liquids B) Speed of Aeroplane C) Intensity of earthquakes D) Depth of mines.

Last Answer : C) Intensity of earthquakes

Two liquids manometer is used for measuring small pressure differences in (A) Liquids (B) Gases (C) Mixture of hydrocarbons (D) None of these

Description : Two liquids manometer is used for measuring small pressure differences in (A) Liquids (B) Gases (C) Mixture of hydrocarbons (D) None of these

Last Answer : (A) Liquids

A differential pressure cell is used for (A) Measuring small pressure difference in gases (B) Measuring small pressure difference in liquids (C) Remote recording of pressure difference (D) Measuring the difference of the impact & the static pressure

Description : A differential pressure cell is used for (A) Measuring small pressure difference in gases (B) Measuring small pressure difference in liquids (C) Remote recording of pressure difference (D) Measuring the difference of the impact & the static pressure

Last Answer : (C) Remote recording of pressure difference

The two elements that exist as liquids at 25°C are (a) Mercury and lithium (b) Mercury and caesium (c) Bromine and mercury (d) Mercury and argon

Description : The two elements that exist as liquids at 25°C are (a) Mercury and lithium (b) Mercury and caesium (c) Bromine and mercury (d) Mercury and argon

Last Answer : Ans:(c)

If water in a lake were to behave like other liquids, then in extremely cold weather it would freeze (a) from top to bottom (b) from bottom to top (c) simultaneously throughout the depth (d) first on the surface, bottom and sides and then in the interior

Description : If water in a lake were to behave like other liquids, then in extremely cold weather it would freeze (a) from top to bottom (b) from bottom to top (c) simultaneously throughout the depth (d) first on the surface, bottom and sides and then in the interior

Last Answer : Ans:(b)

The function of input attenuators in measuring instruments, like VTVM and CRO, is to

Description : The function of input attenuators in measuring instruments, like VTVM and CRO, is to (a) Increase the input impedance (b) Attenuate the frequency range (c) Attenuate the input signal amplitude without altering the frequency contents (d) Attenuate the input impedance

Last Answer : The function of input attenuators in measuring instruments, like VTVM and CRO, is to Attenuate the input signal amplitude without altering the frequency contents

Is it true or false salt is a solute in seawater?

Description : Is it true or false salt is a solute in seawater?

Last Answer : Feel Free to Answer

Air gap readings should be taken on electrical generation machinery periodicly to _________. I. determine the need for cleaning II. check the condition of the bearings A. I only B. II only C. both I and II D. neither I or II

Description : Air gap readings should be taken on electrical generation machinery periodicly to _________. I. determine the need for cleaning II. check the condition of the bearings A. I only B. II only C. both I and II D. neither I or II

Last Answer : Answer: B

Air gap readings for electrical generating equipment should be taken periodicly. This is to _______. I. determine the condition of the bearings II. prevent damage to the rotor and stator A. I only B. II only C. both I and II D. neither I or II

Description : Air gap readings for electrical generating equipment should be taken periodicly. This is to _______. I. determine the condition of the bearings II. prevent damage to the rotor and stator A. I only B. II only C. both I and II D. neither I or II

Last Answer : Answer: C

Air gap readings should be taken on electrical generation equipment periodicly to ________. I. check machine effeciency II. determine the need for cleaning A. I only B. II only C. both I and II D. neither I or II

Description : Air gap readings should be taken on electrical generation equipment periodicly to ________. I. check machine effeciency II. determine the need for cleaning A. I only B. II only C. both I and II D. neither I or II

Last Answer : Answer: D

Air gap readings should be periodicly taken for electrical generation equipment. The best tool to use to take these measurements is a ___________. A. cloth (non-metalic) tape measure B. dial indicator C. inside micrometer D. tapered, long blade, feeler gage

Description : Air gap readings should be periodicly taken for electrical generation equipment. The best tool to use to take these measurements is a ___________. A. cloth (non-metalic) tape measure B. dial indicator C. inside micrometer D. tapered, long blade, feeler gage

Last Answer : Answer: D

Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the condition of the bearings C. provide for the correct proper tightening of the field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Description : Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the ... field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Last Answer : Answer: B

When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in the electrolyte B. any water that has been previously added to the cells will dilute the solution and give a false reading C. a hydrometer reading is inaccurate if taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Description : When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in ... taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Last Answer : Answer: C

As a general rule, the first troubleshooting action to be taken in checking faulty electric control devices is to _____________. A. draw a one line diagram of the circuitry B. test all fuses and measure the line voltage C. take megger readings D. insulate the apparatus from ground

Description : As a general rule, the first troubleshooting action to be taken in checking faulty electric control devices is to _____________. A. draw a one line diagram of the circuitry B. test all fuses and measure the line voltage C. take megger readings D. insulate the apparatus from ground

Last Answer : Answer: B

Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Description : Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Last Answer : (C) Many readings are to be taken from a single setting of the instrument

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

At what point on a meter movement are the most accurate readings taken?

Description : At what point on a meter movement are the most accurate readings taken?

Last Answer : Midscale.

Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Description : Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Last Answer : (c) Many readings are to be taken from a single setting of the instrument*