What is a general term used to describe raw facts?

1 Answer

Answer :

Data.

Related questions

Description : Raw facts are called (a) Data (b) Information (c) Knowledge (d) Wisdom -Technology

Last Answer : (a) Raw facts represent unorganised form of information called data.

Description : The raw facts and unorganised form of data is called information. -Technology

Last Answer : FalseOrganised form of data is called information.

Description : ______________ can be any character, text, word, number or raw facts.

Last Answer : Fill in the Blank: ______________ can be any character, text, word, number or raw facts.

Description : Raw facts and figures about any particular topic are A) Information B) facts C) data D) none of above

Last Answer : Answer : C

Description : A cavity that vibrates at its natural frequency produces a louder sound than at other frequencies. What term is used to describe this phenomenon?

Last Answer : Resonance.

Description : What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Last Answer : Frequency cutoff (fco).

Description : What term is used to describe the reciprocal of deflection sensitivity of a scope?

Last Answer : Deflection factor.

Description : What is the term used to describe the sharing of valence electrons between two or more atoms?

Last Answer : Covalent bonding.

Description : What term is used to describe the definite discrete amounts of energy required to move an electron from a low shell to a higher shell?

Last Answer : Quanta.

Description : What is the term used to describe the basic frequency of a radio wave?

Last Answer : Fundamental frequency.

Description : What is the term used to describe a whole number multiple of the basic frequency of a radio wave?

Last Answer : Harmonic frequency or harmonics.

Description : What term is used to describe a situation in which atmospheric temperature first increases with altitude and then begins to decrease?

Last Answer : Temperature inversion.

Description : What term is used to describe the ability of a radar system to distinguish between targets that are close together?

Last Answer : Target resolution

Description : What term is used to describe the product of pulse width and pulse-repetition frequency?

Last Answer : Duty cycle.

Description : What term is used to describe the period when the diode is not conducting?

Last Answer : Cutoff.

Description : Describe the term "refractive index profile."

Last Answer : Refractive index profile describes the value of refractive index as a function of radial distance at any fiber diameter.

Description : What is the term that is used to describe narrowness in the radiated beam of an antenna?

Last Answer : Antenna directivity.

Description : Describe manufacturing of phosphoric acid with raw material. Reactions and flow diagram. 

Last Answer : Phosphoric acid by wet process 1. H2SO4 leaching Reaction: Process: Phosphate rock is ground and fed to chute where a recycle stream of weak phosphoric acid washes into reaction tank. ... acid is recovered in triple effect evaporator and CaCl2 is separated from final settler.   

Description : Describe any two facts regarding the importance of manganese in our daily life. -SST 10th

Last Answer : Manganese is mainly used in the manufacturing of steel and ferro-manganese alloy. Nearly 10 kg of manganese is required to manufacture one tonne of steel. It is also used in manufacturing ... country's total production in 2000-01. Other manganese-producing states are Madhya Pradesh and Karnataka.

Description : What term can be defined as Specific facts about friendly intentions capabilities and activities vitally needed by adversaries in order to plan and act effectively?

Last Answer : Critical Information

Description : The field arrangements in waveguides are divided into what two categories to describe the various modes of operation?

Last Answer : Transverse electric (TE) and transverse magnetic (TM).

Description : Describe the zero-position of a synchro transmitter.

Last Answer : The transmitter is in its zero-position when the rotor is aligned with the S2 stator winding.

Description : Describe the leakage current in a transmission line and in what unit it is expressed.

Last Answer : The small amount of current that flows through the dielectric between two wires of a transmission line and is expressed in micro ohms per unit length.

Description : Describe a directional coupler.

Last Answer : A fiber optic coupler that prevents the transfer of power between input fibers.

Description : Describe a transparent adhesive.

Last Answer : An epoxy resin that seals mechanical splices and provides index matching between the connected fibers.

Description : Fiber splicing is divided into two broad categories that describe the techniques used for fiber splicing. What are they?

Last Answer : Mechanical and fusion splicing.

Description : Describe the output of a laser diode.

Last Answer : The LD's output has a narrow spectral width and small output beam angle.

Description : Describe stimulated emission

Last Answer : A photon initially produced by spontaneous emission in the active region interacts with the laser material to produce additional photons.

Description : Describe an optical fiber cable component (OFCC).

Last Answer : OFCCs are tight-buffer fiber surrounded by arimid yarn and a low-halogen outer jacket.

Description : Describe avalanche multiplication.

Last Answer : The electrons initially generated by the incident photons accelerate as they move through the APD active region. As these electrons collide with electrons in the semiconductor material, they cause a fraction of them to become part of the photocurrent.

Description : Describe the operation of an optical detector

Last Answer : It is a transducer that converts an optical signal into an electrical signal. It does this by generating an electrical current proportional to the intensity of incident optical radiation.

Description : Describe the preparation of a silicon substrate

Last Answer : Crystal is sliced into wafers. Then ground and polished to remove any surface defect.

Description : Describe the differences between the rheostat connections and those of the potentiometer.

Last Answer : The rheostat may have two connections, one fixed and one moveable; the potentiometer always has three connections, one moveable and two fixed

Description : Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Last Answer : South pole at the right, north pole at the left.

Description : Basically describe an rfcs system.

Last Answer : A keyer provides rf excitation, which can be shifted above or below the assigned frequency.

Description : Basically describe an afts system.

Last Answer : Uses AM to change dc to audio.

Description : What are the terms used to describe an open or closed telegraph circuit?

Last Answer : Space and mark.

Description : Far-field power distributions describe the emitted power per unit area as a function of angle θ in the far-field region. Describe the far-field region.

Last Answer : The far-field region is the region far from the fiber-end face.

Description : Near-field power distributions describe the emitted power per unit area in the near-field region. Describe the near-field region

Last Answer : The near-field region is the region close to the fiber-end face.

Description : Describe the -3 decibel (dB) optical power frequency (f3dB).

Last Answer : The -3 decibel (dB) is the lowest frequency at which the magnitude of the fiber frequency response has decreased to one half its zero-frequency value.

Description : A light wave can be represented as a plane wave. What three properties of light propagation describe a plane wave?

Last Answer : Direction, amplitude, and wavelength of propagation

Description : The mode theory uses electromagnetic wave behavior to describe the propagation of the light along the fiber. What is a set of guided electromagnetic waves called?

Last Answer : Modes of the fiber.

Description : Two methods describe how light propagates along an optical fiber. These methods define two theories of light propagation. What do we call these two theories?

Last Answer : The ray theory and the mode theory.

Description : What classification of a switch is used when you describe it as a rocker switch?

Last Answer : The type of actuator.

Description : Describe three ways to prevent polarization.

Last Answer : Vent the cell, add a material rich in oxygen, and use a material that will absorb hydrogen.

Description : Describe local action

Last Answer : Current flow in a cell with no external load.

Description : Describe three ways to prevent polarization

Last Answer : vent the cell, add a material rich in oxygen, and use a material that will absorb hydrogen.

Description : Describe the physical arrangement of a ground screen.

Last Answer : It is composed of a series of conductors arranged in a radial pattern and buried 1 to 2 feet below the ground.

Description : Describe the basic functions of a fiber optic data link

Last Answer : The basic functions of a fiber optic data link are to convert an electrical input signal to an optical signal, send the optical signal over an optical fiber, and convert the optical signal back to an electrical signal.

Description : What terms are often used to describe basic half-wave antennas?

Last Answer : Dipole, doublet and Hertz.