What term is used to describe the reciprocal of deflection sensitivity of a scope?

What term is used to describe the reciprocal of deflection  sensitivity of a scope?
by

1 Answer

Answer :

Deflection factor.
by

Related questions

(True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Description : (True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Last Answer : False.

What term is used to express the sensitivity of a voltmeter?

Description : What term is used to express the sensitivity of a voltmeter?

Last Answer : Ohms per volt

When measuring receiver sensitivity, what quantities must you add to the dBm reading obtained on the signal generator or test set?

Description : When measuring receiver sensitivity, what quantities must you add to the dBm reading obtained on the signal generator or test set?

Last Answer : Attenuations of the directional coupler and the connecting cable.

You determine receiver sensitivity by measuring the power level of what signal?

Description : You determine receiver sensitivity by measuring the power level of what signal?

Last Answer : Minimum discernible signal (mds).

A loss of receiver sensitivity has the same effect on range performance as what other loss?

Description : A loss of receiver sensitivity has the same effect on range performance as what other loss?

Last Answer : Transmitter power loss.

Which preamplifier design (high-impedance or transimpedance) provides improvements in bandwidth and greater dynamic range with some degradation in sensitivity from an increase in noise?

Description : Which preamplifier design (high-impedance or transimpedance) provides improvements in bandwidth and greater dynamic range with some degradation in sensitivity from an increase in noise?

Last Answer : Transimpedance.

Which amplifier stage (the preamplifier or the postamplifier) is a dominant contributor of noise and significantly influences the sensitivity of the receiver?

Description : Which amplifier stage (the preamplifier or the postamplifier) is a dominant contributor of noise and significantly influences the sensitivity of the receiver?

Last Answer : The preamplifier.

What is the main factor that determines receiver sensitivity?

Description : What is the main factor that determines receiver sensitivity?

Last Answer : Noise

How is fiber sensitivity to bending losses reduced?

Description : How is fiber sensitivity to bending losses reduced?

Last Answer : Fiber sensitivity to bending losses can be reduced if the refractive index of the core is increased and/or if the overall diameter of the fiber increases.

What is voltmeter sensitivity?

Description : What is voltmeter sensitivity?

Last Answer : It is an indication of the resistance of the meter expressed in ohms per volt. The total resistance of the meter is the sensitivity multiplied by the full-scale voltage.

What is ammeter sensitivity?

Description : What is ammeter sensitivity?

Last Answer : The amount of current that will cause full-scale deflection.

What radar scope uses a range step for range measurement?

Description : What radar scope uses a range step for range measurement?

Last Answer : The A scope.

What coordinates are presented on a ppi scope?

Description : What coordinates are presented on a ppi scope?

Last Answer : Range and bearing

What coordinates are displayed on an rhi scope?

Description : What coordinates are displayed on an rhi scope?

Last Answer : Range and elevation.

Why are the ends of the deflection plates bent outward?

Description : Why are the ends of the deflection plates bent outward?

Last Answer : To permit wide-angle deflection of the bea

The horizontal-deflection plates are used to produce what function?

Description : The horizontal-deflection plates are used to produce what function?

Last Answer : Time and/or frequency relationships.

The vertical-deflection plates are used to reproduce what function?

Description : The vertical-deflection plates are used to reproduce what function?

Last Answer : Amplitude.

Is the deflection angle greater when the beam is moving faster or slower?

Description : Is the deflection angle greater when the beam is moving faster or slower?

Last Answer : Slower beam.

Is the deflection angle greater with higher or lower potential on the plates?

Description : Is the deflection angle greater with higher or lower potential on the plates?

Last Answer : Higher potential.

Why are the ends of the deflection plates bent outward?

Description : Why are the ends of the deflection plates bent outward?

Last Answer : To permit wide-angle deflection of the beam.

The horizontal-deflection plates are used to produce what function?

Description : The horizontal-deflection plates are used to produce what function?

Last Answer : Time and/or frequency relationships.

The vertical-deflection plates are used to reproduce what function?

Description : The vertical-deflection plates are used to reproduce what function?

Last Answer : Amplitude.

Is the deflection angle greater when the beam is moving faster or slower?

Description : Is the deflection angle greater when the beam is moving faster or slower?

Last Answer : Slower beam.

Is the deflection angle greater with higher or lower potential on the plates?

Description : Is the deflection angle greater with higher or lower potential on the plates?

Last Answer : Higher potential.

What effect do longer deflection plates have on the electron beam?

Description : What effect do longer deflection plates have on the electron beam?

Last Answer : A greater deflection angle.

Which of the two types of deflection coils (fixed or rotating) is used most often?

Description : Which of the two types of deflection coils (fixed or rotating) is used most often?

Last Answer : Fixed.

What type of deflection is preferred for a crt electron beam?

Description : What type of deflection is preferred for a crt electron beam?

Last Answer : . Electromagnetic.

. A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Description : . A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Description : A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

‘Illegitimate crossing over’ is another term for (a) Transition (b) Transversion (c) Reciprocal translocation (d) None of the above

Description : ‘Illegitimate crossing over’ is another term for (a) Transition (b) Transversion (c) Reciprocal translocation (d) None of the above

Last Answer : Ans. ((c))

Describe following terms w.r.t. Analog voltmeter : (i) Sensitivity (ii) Loading effect

Description : Describe following terms w.r.t. Analog voltmeter : (i) Sensitivity (ii) Loading effect

Last Answer : Sensitivity: The sensitivity of a voltmeter is just its capability to detect voltage, usually meaning smaller and smaller voltages. When selecting a meter for a certain voltage measurement, it is ... called loading effect of the voltmeters. It is mainly caused due to low sensitivity instruments.

A cavity that vibrates at its natural frequency produces a louder sound than at other frequencies. What term is used to describe this phenomenon?

Description : A cavity that vibrates at its natural frequency produces a louder sound than at other frequencies. What term is used to describe this phenomenon?

Last Answer : Resonance.

What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Description : What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Last Answer : Frequency cutoff (fco).

What is the term used to describe the sharing of valence electrons between two or more atoms?

Description : What is the term used to describe the sharing of valence electrons between two or more atoms?

Last Answer : Covalent bonding.

What term is used to describe the definite discrete amounts of energy required to move an electron from a low shell to a higher shell?

Description : What term is used to describe the definite discrete amounts of energy required to move an electron from a low shell to a higher shell?

Last Answer : Quanta.

What is the term used to describe the basic frequency of a radio wave?

Description : What is the term used to describe the basic frequency of a radio wave?

Last Answer : Fundamental frequency.

What is the term used to describe a whole number multiple of the basic frequency of a radio wave?

Description : What is the term used to describe a whole number multiple of the basic frequency of a radio wave?

Last Answer : Harmonic frequency or harmonics.

What term is used to describe a situation in which atmospheric temperature first increases with altitude and then begins to decrease?

Description : What term is used to describe a situation in which atmospheric temperature first increases with altitude and then begins to decrease?

Last Answer : Temperature inversion.

What term is used to describe the ability of a radar system to distinguish between targets that are close together?

Description : What term is used to describe the ability of a radar system to distinguish between targets that are close together?

Last Answer : Target resolution

What term is used to describe the product of pulse width and pulse-repetition frequency?

Description : What term is used to describe the product of pulse width and pulse-repetition frequency?

Last Answer : Duty cycle.

What term is used to describe the period when the diode is not conducting?

Description : What term is used to describe the period when the diode is not conducting?

Last Answer : Cutoff.

Describe the term "refractive index profile."

Description : Describe the term "refractive index profile."

Last Answer : Refractive index profile describes the value of refractive index as a function of radial distance at any fiber diameter.

What is the term that is used to describe narrowness in the radiated beam of an antenna?

Description : What is the term that is used to describe narrowness in the radiated beam of an antenna?

Last Answer : Antenna directivity.

What is a general term used to describe raw facts?

Description : What is a general term used to describe raw facts?

Last Answer : Data.

How would you describe the nature and scope of harm to and abuse of adults at risk?

Description : How would you describe the nature and scope of harm to and abuse of adults at risk?

Last Answer : What is the answer ?

Describe the scope of construction material in environmental engineering.

Description : Describe the scope of construction material in environmental engineering. 

Last Answer : The goal of environmental engineering is to ensure the community development and the sensible use of water, land and air resources to make them sustainable. This goal is achieved by managing ... , artificial sand , waterproofing and damp proofing material of required quality and quantity is used.

With example, describe use of scope resolution operator.

Description : With example, describe use of scope resolution operator.

Last Answer : In C, the global version of a variable cannot be accessed from within the inner block. C++ resolves this problem by introducing a new operator:: called scope resolution operator. This can be used to uncover a hidden variable. It takes ... cout << ::m = <<::m; } return 0; }

What is your current personal short-term (say, within the scope of a year) goal?

Description : What is your current personal short-term (say, within the scope of a year) goal?

Last Answer : answer:I would like to donate blood, or at least be in shape to qualify to do so, by the end of 2012. I need to gain about 20 pounds, and probably my hemoglobin needs to rise a bit, but I think ... given more than I've received. More short term, it'd be cool if I could make my Etsy shop successful.

Which of the following statements about independent financial statement audit is incorrect? a. The term "scope of the audit" refers to audit procedures deemed necessary ithe circumstances to achieve the objective of the audit. b. The auditor's opinion enhances the credibility of the financial statements. c. The phrase used to express the auditor's opinion is "present fairly, in all material respects". d. The risk that the auditor will fail to uncover material misstatement is eliminated when the auditor conducts the audit in accordance with PSAs.n

Description : Which of the following statements about independent financial statement audit is incorrect? a. The term "scope of the audit" refers to audit procedures deemed necessary in the circumstances ... uncover material misstatement is eliminated when the auditor conducts the audit in accordance with PSAs.

Last Answer : The risk that the auditor will fail to uncover material misstatement is eliminated when the auditor conducts the audit in accordance with PSAs.