What advantage does a shunt motor have over a series motor?

What advantage does a shunt motor have over a series  motor?
by

1 Answer

Answer :

It maintains a constant speed under varying loads.
by

Related questions

What is the main advantage of a series motor?

Description : What is the main advantage of a series motor?

Last Answer : High torque (turning force) at low speed.

What is the arrangement of both series and shunt components called?

Description : What is the arrangement of both series and shunt components called?

Last Answer : Combination peaking.

What determines whether these components are considered series or shunt?

Description : What determines whether these components are considered series or shunt?

Last Answer : . The relationship of the components to the output-signal path.

A shunt type voltage regulator is connected in series/parallel with the load resistance.

Description : A shunt type voltage regulator is connected in series/parallel with the load resistance.

Last Answer : Parallel

What is the difference between the series-fed and the shunt-fed Hartley oscillator?

Description : What is the difference between the series-fed and the shunt-fed Hartley oscillator?

Last Answer : In the series-fed Hartley oscillator, dc flows through the tank circuit.

The electrical diagram shown in the illustration represents a ___________. EL-0054 A. series-wound motor B. shunt-wound motor C. compound-wound motor D. flat-compounded motor

Description : The electrical diagram shown in the illustration represents a ___________. EL-0054 A. series-wound motor B. shunt-wound motor C. compound-wound motor D. flat-compounded motor

Last Answer : Answer: C

As shown in the illustration, the electrical symbol is used to indicate which of the listed types of motors? EL-0054 A. Shunt motor. B. Series motor. C. Compound motor. D. Tri-field motor.

Description : As shown in the illustration, the electrical symbol is used to indicate which of the listed types of motors? EL-0054 A. Shunt motor. B. Series motor. C. Compound motor. D. Tri-field motor.

Last Answer : Answer: C

What type of electric motor is commonly used to start small auxiliary diesel engines? A. synchronous B. series C. shunt D. cage

Description : What type of electric motor is commonly used to start small auxiliary diesel engines? A. synchronous B. series C. shunt D. cage

Last Answer : Answer: B

In a series wound motor, the current passing through the field windings is also passing through the _____________. A. armature B. shunt field C. reactance comparator D. laminations

Description : In a series wound motor, the current passing through the field windings is also passing through the _____________. A. armature B. shunt field C. reactance comparator D. laminations

Last Answer : Answer: A

Regenerative braking (A) Can be used for stopping a motor. (B) Cannot be easily applied to DC series motors. (C) Can be easily applied to DC shunt motors (D) Cannot be used when motor load has overhauling characteristics.

Description : Regenerative braking (A) Can be used for stopping a motor. (B) Cannot be easily applied to DC series motors. (C) Can be easily applied to DC shunt motors (D) Cannot be used when motor load has overhauling characteristics.

Last Answer : Ans: B Because reversal of Ia would also mean reversal of field and hence of Eb

As compared to shunt and compound DC motors, the series DC motor will have the highest torque because of its comparatively ____________ at the start. (A) Lower armature resistance. (B) Stronger series field. (C) Fewer series turns. (D) Larger armature current.

Description : As compared to shunt and compound DC motors, the series DC motor will have the highest torque because of its comparatively ____________ at the start. (A) Lower armature resistance. (B) Stronger series field. (C) Fewer series turns. (D) Larger armature current.

Last Answer : (D) Larger armature current.

The torque, in a _____________is proportional to the square of the armature current (A) DC shunt motor (B) stepper motor (C) 2-phase servomotor (D) DC series motor

Description : The torque, in a _____________is proportional to the square of the armature current (A) DC shunt motor (B) stepper motor (C) 2-phase servomotor (D) DC series motor

Last Answer : (D) DC series motor

The speed-torque characteristics of a DC series motor are approximately similar to those of the _________motor. (A) universal (B) synchronous (C) DC shunt (D) two-phase

Description : The speed-torque characteristics of a DC series motor are approximately similar to those of the _________motor. (A) universal (B) synchronous (C) DC shunt (D) two-phase

Last Answer : Ans: A Universal motor has same characteristics as DC series motor and also known as an a.c series motor.

The most suitable servomotor for low power applications is (A) a dc series motor. (B) a dc shunt motor. (C) an ac two-phase induction motor. (D) an ac series motor.

Description : The most suitable servomotor for low power applications is (A) a dc series motor. (B) a dc shunt motor. (C) an ac two-phase induction motor. (D) an ac series motor.

Last Answer : (B) a dc shunt motor.

The length cf air gap to be provided in ______ is primarily determined by power factor consideration. (a) d.c. series motor . (b) d.c. shunt motor (c) induction motor (d) synchronous motor

Description : The length cf air gap to be provided in ______ is primarily determined by power factor consideration. (a) d.c. series motor . (b) d.c. shunt motor (c) induction motor (d) synchronous motor

Last Answer : (c) induction motor

Unlike a shunt motor, it is difficult for a series motor to stall under heavy loading because?

Description : Unlike a shunt motor, it is difficult for a series motor to stall under heavy loading because?

Last Answer : Unlike a shunt motor, it is difficult for a series motor to stall under heavy loading because it develops high overload torque.

As compared to shunt and compound motors, series motor has the highest torque...

Description : As compared to shunt and compound motors, series motor has the highest torque because of its comparatively .......... at the start.

Last Answer : As compared to shunt and compound motors, series motor has the highest torque because of its comparatively stronger series field at the start.

What is the main disadvantage of a series motor?

Description : What is the main disadvantage of a series motor?

Last Answer : It must have a load connected to avoid damage from excess speed.

What is the purpose of a heat shunt?

Description : What is the purpose of a heat shunt?

Last Answer : To prevent damage to heat-sensitive components.

A shunt-type voltage regulator is connected in serial/parallel (which one) with the load resistance.

Description : A shunt-type voltage regulator is connected in serial/parallel (which one) with the load resistance.

Last Answer : In parallel.

Under what circuit conditions would the shunt detector be used?

Description : Under what circuit conditions would the shunt detector be used?

Last Answer : When the input voltage variations are too small to give a usable output from a series detector.

A good choice of shunt resistance will place the indicating pointer near what part of the meter scale with a normal load?

Description : A good choice of shunt resistance will place the indicating pointer near what part of the meter scale with a normal load?

Last Answer : Midscale.

Armature shunting method of speed control of dc shunt motor is preferred over annature resistance method...

Description : Armature shunting method of speed control of dc shunt motor is preferred over annature resistance method due to:  (1) Better speed regulation (2) Less loss in external resistance (3) Simplicity in control circuit (4) Reduced cost of controller

Last Answer : Armature shunting method of speed control of dc shunt motor is preferred over annature resistance method due to: Better speed regulation.

Draw and state how Aryton shunt type DC ammeter . State advantage of using Aryton shunt.

Description : Draw and state how Aryton shunt type DC ammeter . State advantage of using Aryton shunt.

Last Answer : OR The Aryton shunt eliminates the possibility of having the meter in the circuit without a shunt. This advantage is gained at the price of slightly higher overall Aryton shunt ammeter. In this ... between shunts. 3. Another advantage is that it may be used as a wide range ammeter. 

What is a major advantage of the crimped terminal over the soldered terminal?

Description : What is a major advantage of the crimped terminal over the soldered terminal?

Last Answer : Requires relatively little operator skill to install.

What advantage does a half adder have over a quarter adder?

Description : What advantage does a half adder have over a quarter adder?

Last Answer : The half adder generates a carry.

What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Description : What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Last Answer : The bridge rectifier can produce twice the voltage with the same size transformer.

What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Description : What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Last Answer : Frequency stability.

What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Description : What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Last Answer : Frequency stability.

What is the advantage of using in-line wattmeters over output power meters?

Description : What is the advantage of using in-line wattmeters over output power meters?

Last Answer : Most in-line wattmeters are capable of measuring both forward and reflected power.

For power measurements, what advantage does an electronic wattmeter have over an electrodynamic wattmeter?

Description : For power measurements, what advantage does an electronic wattmeter have over an electrodynamic wattmeter?

Last Answer : Electronic wattmeters are capable of measuring high-fequency signals.

What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Description : What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Last Answer : The bridge rectifier can produce double the voltage with the same size transformer.

What is the great advantage of computers over typewriters?

Description : What is the great advantage of computers over typewriters?

Last Answer : Correcting errors.

What is the primary advantage of bulk-effect devices over normal pn-junction semiconductors?

Description : What is the primary advantage of bulk-effect devices over normal pn-junction semiconductors?

Last Answer : Larger microwave power outputs.

What is the advantage of single-sideband (ssb) transmission over AM transmission?

Description : What is the advantage of single-sideband (ssb) transmission over AM transmission?

Last Answer : The same amount of intelligence can be transmitted with one sixth of the output power with less than one-half the bandwidth.

Why is direct accessing of data a big advantage over the sequential accessing of data?

Description : Why is direct accessing of data a big advantage over the sequential accessing of data?

Last Answer : It gives us fast, immediate access to specific data without having to examine each and every record from the beginning.

What is the major advantage of a transistor over a tube?

Description : What is the major advantage of a transistor over a tube?

Last Answer : Rugged design.

What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Description : What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Last Answer : The electrodynamometer-type meter can be used to measure both ac and dc currents.

What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Description : What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Last Answer : The electrodynamometer-type meter can be used to measure both ac and dc currents.

What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Description : What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Last Answer : Both are susceptible to noise and interference

Ventriculoperitoneal shunt - series?

Description : Ventriculoperitoneal shunt - series?

Last Answer : Normal anatomyThe cerebrospinal fluid (CSF) bathes the brain and spinal cord. Most of the CSF is in the ventricles of the brain, which are large cavities within the brain which produce and reabsorb the CSF. ... Network. Also reviewed by David Zieve, MD, MHA, Medical Director, A.D.A.M., Inc.

Which of the device is employed in substation to limit the short circuit current in the power system: a) Shunt condenser b) Reactor c) Series capacitor d) Shunt capacitor

Description : Which of the device is employed in substation to limit the short circuit current in the power system: a) Shunt condenser b) Reactor c) Series capacitor d) Shunt capacitor

Last Answer : Ans: B

Which of the methods listed is used to maintain the division of load between two compound-wound, DC generators operating in parallel? A. The shunt fields are interconnected. B. The shunt field rheostats are interconnected. C. The series fields of both generators are connected in series. D. The equalizer connection parallels the series fields of all machines.

Description : Which of the methods listed is used to maintain the division of load between two compound-wound, DC generators operating in parallel? A. The shunt fields are interconnected. B. The shunt ... generators are connected in series. D. The equalizer connection parallels the series fields of all machines.

Last Answer : Answer: D

Which of the following statements regarding the use of a current measuring instrument is correct? A. It must be connected in series with the circuit. B. You should always start with the lowest range until a suitable reading is obtained. C. The indicating needle is deflected from left to right regardless of polarity. D. An external shunt is generally utilized where current is less than 10 amperes.

Description : Which of the following statements regarding the use of a current measuring instrument is correct? A. It must be connected in series with the circuit. B. You should always start with the lowest range ... of polarity. D. An external shunt is generally utilized where current is less than 10 amperes.

Last Answer : Answer: A

To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Description : To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Last Answer : Answer: A

The purpose of resistor bank 'R1-R5' in the winch circuit shown in the illustration is to ______________. EL-0102 A. limit armature current in lower and 'series field' current in hoist to obtain required speeds B. divert shunt field current for speed control in both directions of operation C. limit armature current in hoist and 'series field' current in lower to obtain required speeds D. regulate the strength of the brake solenoid 'B1-B2' in both directions of operation

Description : The purpose of resistor bank 'R1-R5' in the winch circuit shown in the illustration is to ______________. EL-0102 A. limit armature current in lower and 'series field' current in hoist to ... required speeds D. regulate the strength of the brake solenoid 'B1-B2' in both directions of operation

Last Answer : Answer: C

In the construction of D.C. motors, parts of both the series and shunt fields are wound on the _____________. A. opposite main pole B. rotor core C. interpole D. same main pole

Description : In the construction of D.C. motors, parts of both the series and shunt fields are wound on the _____________. A. opposite main pole B. rotor core C. interpole D. same main pole

Last Answer : Answer: D

Which of the following meters uses a shunt connected in series with the load, but parallel with the meter movement? A. voltmeter B. power factor meter C. wattmeter D. ammeter

Description : Which of the following meters uses a shunt connected in series with the load, but parallel with the meter movement? A. voltmeter B. power factor meter C. wattmeter D. ammeter

Last Answer : Answer: D