What is a major advantage of the crimped terminal over the soldered terminal?

What is a major advantage of the crimped terminal over the  soldered terminal?
by

1 Answer

Answer :

Requires relatively little operator skill to install.
by

Related questions

In D.C. motor construction, the armature coils' ends are _______________. A. soldered to the commutator bar risers B. imbedded into core slots C. crimped together with brush pigtails D. spliced with the field windings

Description : In D.C. motor construction, the armature coils' ends are _______________. A. soldered to the commutator bar risers B. imbedded into core slots C. crimped together with brush pigtails D. spliced with the field windings

Last Answer : Answer: A

Define the metal solvent action that takes place when copper conductors are soldered together.

Description : Define the metal solvent action that takes place when copper conductors are soldered together.

Last Answer : The solder dissolves a small amount of the copper, which combines with the solder forming a new alloy; therefore, the joint is one common metal.

Why must items to be soldered be cleaned just prior to the soldering process?

Description : Why must items to be soldered be cleaned just prior to the soldering process?

Last Answer : Solder will not adhere to dirty, greasy, or oxidized surfaces.

Flux aids in soldering by removing what from surfaces to be soldered?

Description : Flux aids in soldering by removing what from surfaces to be soldered?

Last Answer : Oxides.

What is the appearance of a properly soldered joint?

Description : What is the appearance of a properly soldered joint?

Last Answer : Bright and shiny with no cracks or pits.

When a lead is soldered to a pad without passing through the board, it is known as what type of termination?

Description : When a lead is soldered to a pad without passing through the board, it is known as what type of termination?

Last Answer : On-the-board termination.

What do you think of crimped hair?

Description : What do you think of crimped hair?

Last Answer : Hate it. Ugly as shit.

Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and (A) Moving mercury and graphite (B) Graphite and moving mercury (C) Moving mercury and carbon (D) Moving mercury and crimped steel wire

Description : Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and (A) Moving mercury and graphite (B) Graphite and moving mercury (C) Moving mercury and carbon (D) Moving mercury and crimped steel wire

Last Answer : (B) Graphite and moving mercury

What is the major advantage of a transistor over a tube?

Description : What is the major advantage of a transistor over a tube?

Last Answer : Rugged design.

What is a major advantage of modular construction?

Description : What is a major advantage of modular construction?

Last Answer : Rapid repair of systems and improved efficiency

Is the Intel iMac's CPU socketed or soldered?

Description : Is the Intel iMac's CPU socketed or soldered?

Last Answer : I don't know technically what the case is (I suspect socketed as it's based on standard architecture) but it's not possible to upgrade the CPU, either by yourself and definitely any Apple service ... CPU upgrades are simply not allowed and Apple has made sure that it's not possible to do so.

Whose idea was it to make laptop adapters cords soldered on!

Description : Whose idea was it to make laptop adapters cords soldered on!

Last Answer : I got a new imitation Dell power cord off of eBay for the fraction of the price of the Dell one when mine went south. It is a pain in the butt when they break, but knowing where to buy a new one if this happens to break (which does seem most likely) makes it easier to live with. :)

In actual applications, electrical connections to 'R1-R2' of figure 'A' and to 'R1-R2- R3' of figure 'B' shown in the illustration are made by ______________. EL-0092 A. soldered contacts B. spliced and taped connections C. slip rings and brushes D. solderless crimp-on connectors

Description : In actual applications, electrical connections to 'R1-R2' of figure 'A' and to 'R1-R2- R3' of figure 'B' shown in the illustration are made by ______________. EL-0092 A. soldered contacts B. spliced and taped connections C. slip rings and brushes D. solderless crimp-on connectors

Last Answer : Answer: C

When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at a time B. using a thermal shunt C. pre-oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Description : If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at ... oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Last Answer : Answer: B

A capacitor discolored due to excessive heat should be _____________. A. calibrated B. replaced C. cooled D. soldered

Description : A capacitor discolored due to excessive heat should be _____________. A. calibrated B. replaced C. cooled D. soldered

Last Answer : Answer: B

One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. Heating of capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Description : One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. ... capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Last Answer : B. Heating of capacitor in the oscillator

Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections B. Power supply voltage changes C. Loose connections in the oscillator, amplifier, or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Description : Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections ... , or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Last Answer : D. DC and RF heating of resistors, causing then to change values.

What advantage does a half adder have over a quarter adder?

Description : What advantage does a half adder have over a quarter adder?

Last Answer : The half adder generates a carry.

What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Description : What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Last Answer : The bridge rectifier can produce twice the voltage with the same size transformer.

What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Description : What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Last Answer : Frequency stability.

What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Description : What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Last Answer : Frequency stability.

What is the advantage of using in-line wattmeters over output power meters?

Description : What is the advantage of using in-line wattmeters over output power meters?

Last Answer : Most in-line wattmeters are capable of measuring both forward and reflected power.

For power measurements, what advantage does an electronic wattmeter have over an electrodynamic wattmeter?

Description : For power measurements, what advantage does an electronic wattmeter have over an electrodynamic wattmeter?

Last Answer : Electronic wattmeters are capable of measuring high-fequency signals.

What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Description : What main advantage does a bridge rectifier have over a conventional full-wave rectifier?

Last Answer : The bridge rectifier can produce double the voltage with the same size transformer.

What is the great advantage of computers over typewriters?

Description : What is the great advantage of computers over typewriters?

Last Answer : Correcting errors.

What is the primary advantage of bulk-effect devices over normal pn-junction semiconductors?

Description : What is the primary advantage of bulk-effect devices over normal pn-junction semiconductors?

Last Answer : Larger microwave power outputs.

What is the advantage of single-sideband (ssb) transmission over AM transmission?

Description : What is the advantage of single-sideband (ssb) transmission over AM transmission?

Last Answer : The same amount of intelligence can be transmitted with one sixth of the output power with less than one-half the bandwidth.

Why is direct accessing of data a big advantage over the sequential accessing of data?

Description : Why is direct accessing of data a big advantage over the sequential accessing of data?

Last Answer : It gives us fast, immediate access to specific data without having to examine each and every record from the beginning.

What advantage does a shunt motor have over a series motor?

Description : What advantage does a shunt motor have over a series motor?

Last Answer : It maintains a constant speed under varying loads.

What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Description : What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Last Answer : The electrodynamometer-type meter can be used to measure both ac and dc currents.

What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Description : What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Last Answer : The electrodynamometer-type meter can be used to measure both ac and dc currents.

What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Description : What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Last Answer : Both are susceptible to noise and interference

What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Description : What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Last Answer : 60-percent tin and 40-percent lead (60/40 solder).

Why are preinsulated terminal lugs and splices color coded?

Description : Why are preinsulated terminal lugs and splices color coded?

Last Answer : To identify wire sizes they are to be used on.

Why should a lockwasher never be used with an aluminum terminal?

Description : Why should a lockwasher never be used with an aluminum terminal?

Last Answer : It gouges the terminal lug and causes deterioration.

What tools should be used to install large aluminum terminal lugs and splices?

Description : What tools should be used to install large aluminum terminal lugs and splices?

Last Answer : Power-operated crimping tools.

Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Description : Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Last Answer : No, it is done automatically by the petroleum abrasive compound that comes in the terminal or splices.

Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Description : Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Last Answer : Spaghetti or heat-shrinkable tubing.

What are the basic requirements for any splice or terminal connection?

Description : What are the basic requirements for any splice or terminal connection?

Last Answer : The connection must be both mechanically and electrically as strong as the conductor or device with which it is used

In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Description : In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Last Answer : Negative.

The work center supervisor can update what items from a user terminal?

Description : The work center supervisor can update what items from a user terminal?

Last Answer : COSAL, APL, EIC, SHIP'S FORCE WORK LIST, and CSMP.

What is the range of earth terminal transmitter output power?

Description : What is the range of earth terminal transmitter output power?

Last Answer : Up to 20 kilowatts.

What is the function of a tone terminal set?

Description : What is the function of a tone terminal set?

Last Answer : It converts dc to audio or vice versa.

Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Description : Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Last Answer : The internal (source) resistance of the battery will drop some of the voltage

In the primary cell, why are negative ions attracted to the negative terminal of the cell?

Description : In the primary cell, why are negative ions attracted to the negative terminal of the cell?

Last Answer : The positive charge caused by electrons leaving the negative electrode attracts the negative ions.

An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Description : An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Last Answer : Negative, positive

What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Description : What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Last Answer : The soldering tips are hot only during the brief period of soldering the connection, thus minimizing the chance of burning the wire insulation or connector inserts.

What is the advantage of designing a limited bandwidth into a servo amplifier?

Description : What is the advantage of designing a limited bandwidth into a servo amplifier?

Last Answer : Unwanted noise-generated frequencies are rejected

What is the advantage of using a closed-servo loop to control load velocity?

Description : What is the advantage of using a closed-servo loop to control load velocity?

Last Answer : The closed-servo loop can regulate load speed under changing conditions.