What two properties of the launch condition may affect multimode fiber attenuation measurements?

What two properties of the launch condition may affect  multimode fiber attenuation measurements?
by

1 Answer

Answer :

. Launch spot size and angular distribution.
by

Related questions

in multimode fibers, how do fiber joints increase fiber attenuation following the joint?

Description : in multimode fibers, how do fiber joints increase fiber attenuation following the joint?

Last Answer : By disturbing the fiber's mode power distribution (MPD).

Why is a dead-zone fiber placed between the test fiber and OTDR when conducting attenuation measurements?

Description : Why is a dead-zone fiber placed between the test fiber and OTDR when conducting attenuation measurements?

Last Answer : To reduce the effect of the initial reflection at the OTDR

What four fiber properties determine the number of modes propagating in a multimode gradedindex fiber?

Description : What four fiber properties determine the number of modes propagating in a multimode gradedindex fiber?

Last Answer : Numerical aperture (NA), relative refractive index difference ( D), profile parameter (α), and normalized frequency (V).

Modal dispersion affects the bandwidth of multimode systems. It is essential to adjust what three fiber properties to maximize system bandwidth?

Description : Modal dispersion affects the bandwidth of multimode systems. It is essential to adjust what three fiber properties to maximize system bandwidth?

Last Answer : Core diameter, NA, and index profile properties.

What are the two methods used by fiber manufacturers to fabricate multimode and single mode glass fibers?

Description : What are the two methods used by fiber manufacturers to fabricate multimode and single mode glass fibers?

Last Answer : Vapor phase oxidation and direct-melt process.

Why can multimode graded-index fiber 1300-nm systems using LEDs operate over longer distances and at higher bandwidths than 850-nm systems?

Description : Why can multimode graded-index fiber 1300-nm systems using LEDs operate over longer distances and at higher bandwidths than 850-nm systems?

Last Answer : Longer distances and higher bandwidths are possible because fiber material losses and dispersion are significantly reduced at the 1300-nm region.

What are the most distinguishing characteristics of a multimode graded-index fiber?

Description : What are the most distinguishing characteristics of a multimode graded-index fiber?

Last Answer : Source-to-fiber coupling efficiency and insensitivity to microbending and macrobending losses.

What multimode graded-index fiber offers the best overall performance for most applications?

Description : What multimode graded-index fiber offers the best overall performance for most applications?

Last Answer : 62.5/125 mm multimode graded-index fiber.

Light travels faster in a material with a lower refractive index. Therefore, light rays that travel a longer distance in a lower refractive index travel at a greater average velocity. What effect does this have on multimode graded-index fiber modal dispersion and bandwidth?

Description : Light travels faster in a material with a lower refractive index. Therefore, light rays that travel a longer distance in a lower refractive index travel at a greater average velocity. What effect does this have on multimode graded-index fiber modal dispersion and bandwidth?

Last Answer : Decreases the time difference between light rays, which reduces modal dispersion and increases fiber bandwidth.

In multimode step-index fibers, the majority of light propagates in the fiber core for what reason?

Description : In multimode step-index fibers, the majority of light propagates in the fiber core for what reason?

Last Answer : Most modes in multimode step-index fibers propagate far from cutoff.

Multimode optical fibers can have a step-index or graded index refractive index profile. Which fiber, multimode step-index or multimode graded-index fiber, usually performs better?

Description : Multimode optical fibers can have a step-index or graded index refractive index profile. Which fiber, multimode step-index or multimode graded-index fiber, usually performs better?

Last Answer : Multimode graded-index fiber

Does underfilling a multimode optical fiber excite mainly high-order or low-order modes?

Description : Does underfilling a multimode optical fiber excite mainly high-order or low-order modes?

Last Answer : Low-order modes.

The number of modes propagated in a multimode fiber depends on core size and numerical aperture (NA). If the core size and the NA decrease, will the number of modes propagated increase or decrease?

Description : The number of modes propagated in a multimode fiber depends on core size and numerical aperture (NA). If the core size and the NA decrease, will the number of modes propagated increase or decrease?

Last Answer : Decrease.

Which type of optical fiber (multimode or single mode) tends to have lower loss and produces less signal distortion?

Description : Which type of optical fiber (multimode or single mode) tends to have lower loss and produces less signal distortion?

Last Answer : Single mode fiber.

If the length of the fiber point defect changes with pulse duration, is the OTDR signal deviation a point defect or a region of high fiber attenuation?

Description : If the length of the fiber point defect changes with pulse duration, is the OTDR signal deviation a point defect or a region of high fiber attenuation?

Last Answer : A point defect.

Do small core distortions formed by arc fusion's self alignment mechanism have more of an affect on light propagating through multimode or single mode fibers?

Description : Do small core distortions formed by arc fusion's self alignment mechanism have more of an affect on light propagating through multimode or single mode fibers?

Last Answer : Single mode fibers.

Attenuation is mainly a result of what three properties?

Description : Attenuation is mainly a result of what three properties?

Last Answer : Light absorption, scattering, and bending losses.

optical launch conditions exists if the launch spot size and angular distribution are larger than that of the fiber core?

Description : optical launch conditions exists if the launch spot size and angular distribution are larger than that of the fiber core?

Last Answer : Overfilled.

When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Description : When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Last Answer : When an installed optical fiber cable or cable plant is less than 50 meters in length.

Why do end users perform fiber geometry measurements in the laboratory?

Description : Why do end users perform fiber geometry measurements in the laboratory?

Last Answer : To reduce system attenuation and coupling loss resulting from poor fiber fabrication.

List the fiber geometrical measurements performed in the laboratory.

Description : List the fiber geometrical measurements performed in the laboratory.

Last Answer : Cladding diameter, core diameter, numerical aperture, and mode field diameter.

Under normal condition, a single fiber should not be used for a two-way communication mainly because of ∙ a. Loss ∙ b. Fading ∙ c. Noise ∙ d. Attenuation

Description : Under normal condition, a single fiber should not be used for a two-way communication mainly because of ∙ a. Loss ∙ b. Fading ∙ c. Noise ∙ d. Attenuation

Last Answer : ∙ c. Noise

Prior to substituting a diode, what measurements should you take to determine its condition?

Description : Prior to substituting a diode, what measurements should you take to determine its condition?

Last Answer : Voltages and resistances.

How does the supply voltage affect the accuracy of Wheatstone bridge measurements?

Description : How does the supply voltage affect the accuracy of Wheatstone bridge measurements?

Last Answer : As the supply voltage increases, bridge components may heat up and become less accurate.

Which type of fiber-optic cable is the best for very high speed data? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Description : Which type of fiber-optic cable is the best for very high speed data? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Last Answer : a. Single-mode step-index

Which type of fiber optic cable is most widely used? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Description : Which type of fiber optic cable is most widely used? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Last Answer : a. Single-mode step-index

Which of the following is not a common type of fiber-optic cable? a. Single-mode step-index b. Multimode graded-index c. Single-mode graded-index d. Multimode step-index

Description : Which of the following is not a common type of fiber-optic cable? a. Single-mode step-index b. Multimode graded-index c. Single-mode graded-index d. Multimode step-index

Last Answer : c. Single-mode graded-index

What type of fiber has the highest modal dispersion? a. Step-index multimode b. Graded index multimode c. Step-index single mode d. Graded index mode

Description : What type of fiber has the highest modal dispersion? a. Step-index multimode b. Graded index multimode c. Step-index single mode d. Graded index mode

Last Answer : a. Step-index multimode

One of the following is among the types of fiber optics used in electronics communication. A. Step-index multimode B. Graded-index multimode C. Semi-graded multimode D. Single mode

Description : One of the following is among the types of fiber optics used in electronics communication. A. Step-index multimode B. Graded-index multimode C. Semi-graded multimode D. Single mode

Last Answer : C. Semi-graded multimode

Ho w many times bigger does the bandwidth of a fiber optic multimode have over a cable? A. 50 times bigger B. 100 times bigger C. 10 times bigger D. 5 times bigger

Description : Ho w many times bigger does the bandwidth of a fiber optic multimode have over a cable? A. 50 times bigger B. 100 times bigger C. 10 times bigger D. 5 times bigger

Last Answer : B. 100 times bigger

Type of fiber that has the highest modal dispersion A. Step-index multimode B. Step-index single mode C. Graded index mode D. Graded index multimode

Description : Type of fiber that has the highest modal dispersion A. Step-index multimode B. Step-index single mode C. Graded index mode D. Graded index multimode

Last Answer : A. Step-index multimode

_____uses short-wave850-nm multimode fiber. A) 10GBase-S B) 10GBase-L C) 10GBase-E D) none of the above

Description : _____uses short-wave850-nm multimode fiber. A) 10GBase-S B) 10GBase-L C) 10GBase-E D) none of the above

Last Answer : 10GBase-S

In multimode fiber, ____________________ index has less dispersion than step index.

Description : In multimode fiber, ____________________ index has less dispersion than step index.

Last Answer : graded

Which type of fiber-optic cable is the most widely used? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded index ∙ D. multimode graded index

Description : Which type of fiber-optic cable is the most widely used? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded index ∙ D. multimode graded index

Last Answer : B. multimode step-index

Which of the following is not a common type of fiber-optic cable? ∙ A. single-mode step-index ∙ B. multimode graded-index ∙ C. single-mode graded-index ∙ D. multimode step-index

Description : Which of the following is not a common type of fiber-optic cable? ∙ A. single-mode step-index ∙ B. multimode graded-index ∙ C. single-mode graded-index ∙ D. multimode step-index

Last Answer : . single-mode graded-index

Which type of fiber optic cable is best for very high speed data? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index

Description : Which type of fiber optic cable is best for very high speed data? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index

Last Answer : A. single-mode step-index

Which type of fiber-optic cable has the least modal dispersion? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index

Description : Which type of fiber-optic cable has the least modal dispersion? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index

Last Answer : A. single-mode step-index

A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index

Description : A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index

Last Answer : ∙ A. graded index

A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode

Description : A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode

Last Answer : ∙ C. step-index

More than one path for light rays to take down the fiber ∙ A. Multimode ∙ B. Step-index ∙ C. Single mode

Description : More than one path for light rays to take down the fiber ∙ A. Multimode ∙ B. Step-index ∙ C. Single mode

Last Answer : A. Multimode

Only one path for light rays to take down the fiber ∙ A. Multimode ∙ B. Step-index ∙ C. Single mode ∙ D. Graded index

Description : Only one path for light rays to take down the fiber ∙ A. Multimode ∙ B. Step-index ∙ C. Single mode ∙ D. Graded index

Last Answer : C. Single mode

The term single mode and multimode are best described as ∙ A. a number of fibers placed into fiber-optic cable ∙ B. the number of voice channels each fiber can support ∙ C. the number of wavelengths each fiber can support ∙ D. the index number

Description : The term single mode and multimode are best described as ∙ A. a number of fibers placed into fiber-optic cable ∙ B. the number of voice channels each fiber can support ∙ C. the number of wavelengths each fiber can support ∙ D. the index number

Last Answer : C. the number of wavelengths each fiber can support

The graded-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.5 ∙ b. 0.05 ∙ c. 0.0005 ∙ d. 5

Description : The graded-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.5 ∙ b. 0.05 ∙ c. 0.0005 ∙ d. 5

Last Answer : ∙ a. 0.5

A step-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.02 ∙ b. 0.2 ∙ c. 2 ∙ d. 0.002

Description : A step-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.02 ∙ b. 0.2 ∙ c. 2 ∙ d. 0.002

Last Answer : b. 0.2

Which type of fiber-optic cable has the least modal dispersion? ∙ a. Single mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Description : Which type of fiber-optic cable has the least modal dispersion? ∙ a. Single mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Last Answer : ∙ a. Single mode step-index

Which type of fiber-optic cable is the best for very high speed data? ∙ a. Single-mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Description : Which type of fiber-optic cable is the best for very high speed data? ∙ a. Single-mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Last Answer : a. Single-mode step-index

Which type of fiber optic cable is most widely used? ∙ a. Single-mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Description : Which type of fiber optic cable is most widely used? ∙ a. Single-mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Last Answer : a. Single-mode step-index

Which of the following is not a common type of fiber-optic cable? ∙ a. Single-mode step-index ∙ b. Multimode graded-index ∙ c. Single-mode graded-index ∙ d. Multimode step-index

Description : Which of the following is not a common type of fiber-optic cable? ∙ a. Single-mode step-index ∙ b. Multimode graded-index ∙ c. Single-mode graded-index ∙ d. Multimode step-index

Last Answer : ∙ a. Single-mode step-index

What type of fiber has the highest modal dispersion? ∙ a. Step-index multimode ∙ b. Graded index multimode ∙ c. Step-index single mode ∙ d. Graded index mode

Description : What type of fiber has the highest modal dispersion? ∙ a. Step-index multimode ∙ b. Graded index multimode ∙ c. Step-index single mode ∙ d. Graded index mode

Last Answer : a. Step-index multimode

Define the term multimode fiber,step index fiber,Graded index fiber and single mode fiber.

Description : Define the term multimode fiber,step index fiber,Graded index fiber and single mode fiber. 

Last Answer : Multimode fiber: A fiber having core radius large,supports hundreads of modes & lesser bandwidth also suitable for short distance communication is called Multi mode fiber.  Step index ... & larger bandwidth also suitable for long distance communication is called single mode fiber.