Prior to substituting a diode, what measurements should you take to determine its condition?

Question

Prior to substituting a diode, what measurements should you take to determine its condition?

asked Aug 18, 2021 by anonymous

1 Answer

Related questions

When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Description : When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Last Answer : The diode is open or has a high-forward resistance.

What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Description : What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Last Answer : Use only one receiver so as not to overload the tester.

What two properties of the launch condition may affect multimode fiber attenuation measurements?

Description : What two properties of the launch condition may affect multimode fiber attenuation measurements?

Last Answer : . Launch spot size and angular distribution.

What is the condition of the diode in a series limiter when an output is developed? In a parallel limiter?

Description : What is the condition of the diode in a series limiter when an output is developed? In a parallel limiter?

Last Answer : Conducting, cutoff.

Radar surface-angular measurements are referenced to true north and measured in what plane?

Description : Radar surface-angular measurements are referenced to true north and measured in what plane?

Last Answer : Horizontal plane.

What are the three units of measure most commonly used when referring to af power measurements?

Description : What are the three units of measure most commonly used when referring to af power measurements?

Last Answer : DB, dBm, and vu.

Kelvin bridges are well suited for what type of measurements?

Description : Kelvin bridges are well suited for what type of measurements?

Last Answer : Small values of resistances

How does the supply voltage affect the accuracy of Wheatstone bridge measurements?

Description : How does the supply voltage affect the accuracy of Wheatstone bridge measurements?

Last Answer : As the supply voltage increases, bridge components may heat up and become less accurate.

When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Description : When you are measuring a component using a bridge, what is the most common cause of inaccurate measurements?

Last Answer : The capacitive and inductive characteristics of the test leads.

Power measurements performed with calorimeters are based on what three variables?

Description : Power measurements performed with calorimeters are based on what three variables?

Last Answer : Temperature, mass, and time.

For power measurements, what advantage does an electronic wattmeter have over an electrodynamic wattmeter?

Description : For power measurements, what advantage does an electronic wattmeter have over an electrodynamic wattmeter?

Last Answer : Electronic wattmeters are capable of measuring high-fequency signals.

When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Description : When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Last Answer : When an installed optical fiber cable or cable plant is less than 50 meters in length.

Why is a dead-zone fiber placed between the test fiber and OTDR when conducting attenuation measurements?

Description : Why is a dead-zone fiber placed between the test fiber and OTDR when conducting attenuation measurements?

Last Answer : To reduce the effect of the initial reflection at the OTDR

Why do end users perform fiber geometry measurements in the laboratory?

Description : Why do end users perform fiber geometry measurements in the laboratory?

Last Answer : To reduce system attenuation and coupling loss resulting from poor fiber fabrication.

List the fiber geometrical measurements performed in the laboratory.

Description : List the fiber geometrical measurements performed in the laboratory.

Last Answer : Cladding diameter, core diameter, numerical aperture, and mode field diameter.

When making voltage measurements in a high-resistance circuit, you should always use a voltmeter with what relative value of resistance?

Description : When making voltage measurements in a high-resistance circuit, you should always use a voltmeter with what relative value of resistance?

Last Answer : . High.

What are the advantages of connecting ammeters in parallel when performing current measurements?

Description : What are the advantages of connecting ammeters in parallel when performing current measurements?

Last Answer : Decreased internal meter resistance, greater accuracy, and greater current range.

The frequency response of test equipment refers to what aspect of ac voltage measurements?

Description : The frequency response of test equipment refers to what aspect of ac voltage measurements?

Last Answer : the range of frequencies that can accurately be measured.

Which of the following statements represents the important factor that must be considered when replacing a faulty diode in the exciter rectifier assembly? A. Be certain that the replacement diode is the same polarity as the one removed. B. Never alter the diode alignment to cause a change in the neutral plane. C. Replacement of a diode also requires balancing of the rotor with a one-piece rotor lamination to be shrunk fit and keyed to the shaft. D. The replacement diode must be dipped in varnish prior to installation to protect against humidity.

Description : Which of the following statements represents the important factor that must be considered when replacing a faulty diode in the exciter rectifier assembly? A. Be certain that the replacement diode ... The replacement diode must be dipped in varnish prior to installation to protect against humidity.

Last Answer : Answer: A

In quadrantal bearing system, back bearing of a line may be obtained from its forward bearing, by (A) Adding 180°, if the given bearing is less than 180° (B) Subtracting 180°, if the given bearing, is more than 180° (C) Changing the cardinal points, i.e. substituting N for S and E for W and vice-versa (D) None of these

Description : In quadrantal bearing system, back bearing of a line may be obtained from its forward bearing, by (A) Adding 180°, if the given bearing is less than 180° (B) Subtracting 180°, if the given bearing, is more ... cardinal points, i.e. substituting N for S and E for W and vice-versa (D) None of these

Last Answer : (C) Changing the cardinal points, i.e. substituting N for S and E for W and vice-versa

Can you help me understand how to determine uncertainty of measurements and calculations?

Description : Can you help me understand how to determine uncertainty of measurements and calculations?

Last Answer : Maybe this video will help you.

Several Questions Rolled Into One: What measurements were originally used to determine foot size? Who was the first to measure feet for shoes? Why are the measurements different for men and women and different countries?

Description : Several Questions Rolled Into One: What measurements were originally used to determine foot size? Who was the first to measure feet for shoes? Why are the measurements different for men and women and different countries?

Last Answer : answer:The foot as a measure was used in almost all cultures and was usually divided into 12, sometimes 10 inches/thumbs or into 16 fingers/digits. The first known standard foot measure was from ... the international foot is defined to be equal to 0.3048 metres (equivalent to 304.8 millimetres).

Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. B. Continuous cardiac output monitoring by the thermodilution method requires continuous infusion of fluid injectate at a constant rate and temperature. C. The major advantage of the Fick method over the thermodilution method of calculating cardiac output is that it is noninvasive, requiring only the determination of oxygen consumption by respiratory gas analysis. D. The technique of thoracic electrical bioimpedance utilizes sensors to determine stroke volume by detecting changes in resistance to a small, applied alternating current.

Description : Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. ... stroke volume by detecting changes in resistance to a small, applied alternating current.

Last Answer : Answer: AD DISCUSSION: Various techniques are available to measure cardiac output continuously. The advantages of continuous cardiac output monitoring, as compared with intermittent methods, are (1) ... function of the stroke volume, which then can be used to calculate the cardiac output

If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs, the accuracy of the traverse may be improved by (A) Taking short legs (B) Making repeated observations of angular and linear measurements (C) Making a subsidiary traverse to determine the length of a long leg (D) All the above

Description : If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs, the accuracy of the traverse may be improved by (A) Taking short legs (B) Making ... (C) Making a subsidiary traverse to determine the length of a long leg (D) All the above

Last Answer : (C) Making a subsidiary traverse to determine the length of a long leg

A religious leader said substituting pets for children is a sin. Why?

Description : A religious leader said substituting pets for children is a sin. Why?

Last Answer : Who is that religious leader, exactly? Anyone with some status in the religious world can say stupid things like that. It doesn’t mean everyone who follows the same religion has to agree. This is just another egomaniac who thinks because he is on the high up he represents God.

What are you substituting for banned plastic bags?

Description : What are you substituting for banned plastic bags?

Last Answer : answer:Yes, reusable totes for the grocery. But for home, I buy small (4 gallon) garbage bags at Dollar Tree, 50 to a roll. They're even lavender scented. And unlike grocery bags, they don't ... As far as newspaper, my hubby works in construction, so we always have rolls of painter's plastic around.

Anyone substituting honey for sugar these days?

Description : Anyone substituting honey for sugar these days?

Last Answer : I drink my coffee black.

Twofold baking question: How do I translate a fruit bread loaf recipe to muffins? How do I go about substituting honey for sugar?

Description : Twofold baking question: How do I translate a fruit bread loaf recipe to muffins? How do I go about substituting honey for sugar?

Last Answer : For the baking time, I would just check it regularly. I would probably start checking after about 20 minutes. I would also keep track of how long it takes so I could write that next to my recipe for future reference. I have no idea about the honey.

Where did Al Gore substituting serious with cereal come from?

Description : Where did Al Gore substituting serious with cereal come from?

Last Answer : first of its Serial' and im not sure, thats a good question. I've never heard him talk apart from in an inconvenient truth'. It may just be something to mock him because its something a kid would ... says it he is always whining or having a tantrum. Have you ever heard him say it in realy life?

How can I quit smoking by substituting with a healthy habit?

Description : How can I quit smoking by substituting with a healthy habit?

Last Answer : Persistence and willpower are the only way to do this. You must first have a good reason why you want to quit. This is the priority and the number one reason that will make you stick with it. There won't ... will all be up to you and how much you are willing to stick to this and see it through.

A quadratic equation whose roots are 2 moe than the roots of the quadratic equation `2x^(2) +3x + 5 = 0`, can be obtained by substituting `"_____"` fo

Description : A quadratic equation whose roots are 2 moe than the roots of the quadratic equation `2x^(2) +3x + 5 = 0`, can be obtained by substituting `"_____"` fo

Last Answer : A quadratic equation whose roots are 2 moe than the roots of the quadratic equation `2x^(2) +3x + 5 = 0`, can be ... `"_____"` for x. `[(x-2)//(x+2)]`

What level of protein structure is affected by substituting charged amino acids with non polar ones?

Description : What level of protein structure is affected by substituting charged amino acids with non polar ones?

Last Answer : Feel Free to Answer

If you're asked to solve a system of equations in which there is no linear equation to start with you can sometimes begin by isolating and substituting a variable that is squared in both equations?

Description : If you're asked to solve a system of equations in which there is no linear equation to start with you can sometimes begin by isolating and substituting a variable that is squared in both equations?

Last Answer : 1

The rule of Universal Instantiation (UI for short) says that we can infer any sentence obtained by substituting a ground term (a term without variables) for the variable. a) True b) False

Description : The rule of Universal Instantiation (UI for short) says that we can infer any sentence obtained by substituting a ground term (a term without variables) for the variable. a) True b) False

Last Answer : a) True

When should wires be twisted prior to lacing?

Description : When should wires be twisted prior to lacing?

Last Answer : When required, such as for the filament leads in electron tube amplifiers.

Why must items to be soldered be cleaned just prior to the soldering process?

Description : Why must items to be soldered be cleaned just prior to the soldering process?

Last Answer : Solder will not adhere to dirty, greasy, or oxidized surfaces.

Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Description : Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Last Answer : No, it is done automatically by the petroleum abrasive compound that comes in the terminal or splices.

On what range should you set the voltmeter prior to taking a voltage measurement?

Description : On what range should you set the voltmeter prior to taking a voltage measurement?

Last Answer : Highest.

When the continuing auditor intends to use information about the entity and its environment obtained in prior periods, the auditor shoulda. Assess control risk as "high" for theassertions affected by the prior-periodinformation.b. Seek permission with the client in usingthe prior period information obtained bythe auditor.c. Determine whether changes haveoccurred that may affect therelevance of such information in thecurrent audit.d. Determine whether to equitably reducethe audit fee due to lower audit effortexpended during the engagement

Description : When the continuing auditor intends to use information about the entity and its environment obtained in prior periods, the auditor should a. Assess control risk as "high" for the assertions ... whether to equitably reduce the audit fee due to lower audit effort expended during the engagement

Last Answer : Determine whether changes have occurred that may affect the relevance of such information in the current audit.

What is the relative length of the time constant for the diode capacitor combination in a damper (long or short)?

Description : What is the relative length of the time constant for the diode capacitor combination in a damper (long or short)?

Last Answer : Short time constant.

In the tunnel diode, the tunneling current is at what level when the forbidden gap of the N-type material is at the same energy level as the empty states of the P-type material?

Description : In the tunnel diode, the tunneling current is at what level when the forbidden gap of the N-type material is at the same energy level as the empty states of the P-type material?

Last Answer : Minimum.

Why is electron flow with the arrow in the symbol of a Zener diode instead of against the arrow as it is in a normal diode?

Description : Why is electron flow with the arrow in the symbol of a Zener diode instead of against the arrow as it is in a normal diode?

Last Answer : Because Zener diodes are operated in the reverse bias mode.

During avalanche effect breakdown, what limits current flow through the diode?

Description : During avalanche effect breakdown, what limits current flow through the diode?

Last Answer : an external current-limiting resistor

What is the doping level of an avalanche effect diode when compared to the doping level of a Zener-effect diode?

Description : What is the doping level of an avalanche effect diode when compared to the doping level of a Zener-effect diode?

Last Answer : The doping level of an avalanche effect diode is lower.

What is the name of the simplest type of rectifier which uses one diode?

Description : What is the name of the simplest type of rectifier which uses one diode?