For a system with derivative feedback, forward path transfer is G(s) = I / (s2 + s + 1) and feedback path

For a system with derivative feedback, forward path transfer is G(s) = I / (s2 + s + 1) and feedback path transfer is H(s) = Ks. What is the value of K to obtain a critically-damped closed loop transient response. 

(a) 0.5 (b) 0.707 (c) 1 (d) 1.414
by

1 Answer

Answer :

For a system with derivative feedback, forward path transfer is G(s) = I / (s2 + s + 1) and feedback path transfer is H(s) = Ks. What is the value of K to obtain a critically-damped closed loop transient response. 

(a) 0.5 (b) 0.707 (c) 1 (d) 1.414

by

Related questions

Introduction of integral action in the forward path of a unity feedback system results in a

Description : Introduction of integral action in the forward path of a unity feedback system results in a  A) Marginally stable system B) System with no steady state error C) System with increased stability margin D) System With better speed of response

Last Answer : Introduction of integral action in the forward path of a unity feedback system results in a System with no steady state error 

Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Description : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Last Answer : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is 16

In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over...

Description : In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over frequency is - 125°.. The phase margin of the system is (a) - 125° (b) - 55° (c) 55° (d) 125°

Last Answer : In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over frequency is - 125°.. The phase margin of the system is 55°

The loop transfer of a system is G(s) H(s) = 5/(s+1) (2s+1)(3s+1) which has the phase crossover frequency

Description : The loop transfer of a system is G(s) H(s) = 5/(s+1) (2s+1)(3s+1) which has the phase crossover frequency fc = 0.16 Hz. The gain margin (dB) of the system is  (a) 6 (b) 4 (c) 2 (d) 0

Last Answer : The loop transfer of a system is G(s) H(s) = 5/(s+1) (2s+1)(3s+1) which has the phase crossover frequency fc = 0.16 Hz. The gain margin (dB) of the system is 6

The dc gain of the system represented by the transfer function G(s)=(s+6)/((s+2)(s+3)) is...

Description : The dc gain of the system represented by the transfer function G(s)=(s+6)/((s+2)(s+3)) is  A) 1 B) 2 C) 5 D) 6

Last Answer : For dc gain substitute s=0 in the given transfer function Ans:option A

For a stable feedback control system, the phase margin is

Description : For a stable feedback control system, the phase margin is  a) always positive b) always negative c) may be positive or negative d) always greater than 180o

Last Answer : For a stable feedback control system, the phase margin is always positive

For a feedback control system of type 2, the steady error for a rap input is

Description : For a feedback control system of type 2, the steady error for a rap input is  A) Infinite B) Constant C) Zero D) Indeterminate

Last Answer : For a feedback control system of type 2, the steady error for a rap input is Zero 

For a 2nd order feedback control system, the peak resonance magnitude should be Mp ≤ 1.15. Hence the

Description : For a 2nd order feedback control system, the peak resonance magnitude should be Mp ≤ 1.15. Hence the damping ratio (δ) is  (a) 0.1 (d) 0.5 (c) 0.707 (d) 1

Last Answer : For a 2nd order feedback control system, the peak resonance magnitude should be Mp ≤ 1.15. Hence the damping ratio (δ) is 0.5

In order to regulate steady state error to zero, in a negative feedback control system, one employs

Description : In order to regulate steady state error to zero, in a negative feedback control system, one employs

Last Answer : In order to regulate steady state error to zero, in a negative feedback control system, one employs Integral control

A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the

Description : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Last Answer : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system crosses the real axis at -0.1.

Negative feedback in a closed-loop control system DOES NOT

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

With negative feedback, the system stability and system gain respectively

Description : With negative feedback, the system stability and system gain respectively (a) Increases and increases (b) Increases and decreases (c) Decreases and increases (d) Decreases and decreases

Last Answer : increases and decreasses

The transient response, with feedback system,?

Description : The transient response, with feedback system,?

Last Answer : The transient response, with feedback system, decays quickly.

The output of a feedback control system must be a function of?

Description : The output of a feedback control system must be a function of?

Last Answer : The output of a feedback control system must be a function of reference and output.

In closed loop control system, with positive value of feedback gain the overall gain of the system will

Description : In closed loop control system, with positive value of feedback gain the overall gain of the system will

Last Answer : In closed loop control system, with positive value of feedback gain the overall gain of the system will decrease.

A satellite orbits the earth 200 km above the surface. What speed, in m/s, is necessary for a circular orbit? The radius of the earth is 6400 km and g = 9.2 m/s2 a.7200 b.6600 c.7800 d.6000 e.107 dynes

Description : A satellite orbits the earth 200 km above the surface. What speed, in m/s, is necessary for a circular orbit? The radius of the earth is 6400 km and g = 9.2 m/s2 a.7200 b.6600 c.7800 d.6000 e.107 dynes

Last Answer : c. 7800

An engineer is asked to design a playground slide such that the speed a child reaches at the bottom does not exceed 4.0 m/s. Determine the maximum height that the slide can be.?Given, g = 9.8 m/s2. -Physics 9th

Description : An engineer is asked to design a playground slide such that the speed a child reaches at the bottom does not exceed 4.0 m/s. Determine the maximum height that the slide can be.?Given, g = 9.8 m/s2. -Physics 9th

Last Answer : Entire PE is converted to KE when the child reaches bottom So KE = PE 12mv2=mgH12mv2=mgH or H=v22g=162×9.8=.816mH=v22g=162×9.8=.816m

The effect of negative feedback on distortion and bandwidth is A) Both distortion and bandwidth get

Description : The effect of negative feedback on distortion and bandwidth is A) Both distortion and bandwidth get decreased B) Both distortion and bandwidth get increased C) Distortion is reduced and bandwidth is increased D) Distortion is increased and bandwidth is decreased 

Last Answer : The effect of negative feedback on distortion and bandwidth is Distortion is reduced and bandwidth is increased

With feedback _____ increases.

Description : With feedback _____ increases.

Last Answer : With feedback system stability increases.

_________is the reference input minus the primary feedback.

Description : _________is the reference input minus the primary feedback.

Last Answer : Actuating signal is the reference input minus the primary feedback.

Regenerative feedback implies feedback with?

Description : Regenerative feedback implies feedback with?

Last Answer : Regenerative feedback implies feedback with a positive sign.

The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0.

Description : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Last Answer : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many solutions Statement 3 : The equations satisfying the condition are parallel Which of the above statements are true ? e) S1 only f) S1 and S2 g) S1 and S3 h) S2 only Answer: (d) S2 o

Description : If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many solutions ... statements are true ? e) S1 only f) S1 and S2 g) S1 and S3 h) S2 only Answer: (d) S2 o

Last Answer : h) S2 only

The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Description : The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity

Last Answer : Ans: 1/11

A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly a.2.5 N b.3 N c.2 N d.4.5 N e.4.9 N

Description : A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly a.2.5 N b.3 N c.2 N d.4.5 N e.4.9 N

Last Answer : d. 4.5 N

Find the energy possessed by an object of mass 10 kg when it is at a height of 2 m above the ground. Given, g = 10 m/s2 -Physics 9th

Description : Find the energy possessed by an object of mass 10 kg when it is at a height of 2 m above the ground. Given, g = 10 m/s2 -Physics 9th

Last Answer : Given, Mass of object m=10kg. Height h=6m. Acceleration due to gravity g=9.8m/s2 Potential Energy of object P.E=m×g×h ⇒mgh=10×9.8×6=98×6 =588J Energy possessed by the object is 588Joule.

A mass of 5kg is 100m above a given datum where local g = 9.75 m/s2 . Find the gravitational force in newtons. (Formula: Fg= mg/k )  a. 48.75 N  b. 50 N  c. 45 N  d. None of the above

Description : A mass of 5kg is 100m above a given datum where local g = 9.75 m/s2 . Find the gravitational force in newtons. (Formula: Fg= mg/k )  a. 48.75 N  b. 50 N  c. 45 N  d. None of the above

Last Answer : 48.75 N

Which neural network allows feedback signal? (A) Feed forward Neural Network (B) Recurrent Neural Network (C) Both(A) & (B) (D) None of the Above

Description : Which neural network allows feedback signal? (A) Feed forward Neural Network (B) Recurrent Neural Network (C) Both(A) & (B) (D) None of the Above

Last Answer : (B) Recurrent Neural Network

What is an auto-associative network? a) a neural network that contains no loops b) a neural network that contains feedback c) a neural network that has only one loop d) a single layer feed-forward neural network with pre-processing

Description : What is an auto-associative network? a) a neural network that contains no loops b) a neural network that contains feedback c) a neural network that has only one loop d) a single layer feed-forward neural network with pre-processing

Last Answer : b) a neural network that contains feedback

What is perceptron? a) a single layer feed-forward neural network with pre-processing b) an auto-associative neural network c) a double layer auto-associative neural network d) a neural network that contains feedback

Description : What is perceptron? a) a single layer feed-forward neural network with pre-processing b) an auto-associative neural network c) a double layer auto-associative neural network d) a neural network that contains feedback

Last Answer : a) a single layer feed-forward neural network with pre-processing

An auto-associative network is: a) a neural network that contains no loops b) a neural network that contains feedback c) a neural network that has only one loop d) a single layer feed-forward neural network with pre-processing

Description : An auto-associative network is: a) a neural network that contains no loops b) a neural network that contains feedback c) a neural network that has only one loop d) a single layer feed-forward neural network with pre-processing

Last Answer : b) a neural network that contains feedback

A perceptron is: a) a single layer feed-forward neural network with pre-processing b) an auto-associative neural network c) a double layer auto-associative neural network d) a neural network that contains feedback

Description : A perceptron is: a) a single layer feed-forward neural network with pre-processing b) an auto-associative neural network c) a double layer auto-associative neural network d) a neural network that contains feedback

Last Answer : a) a single layer feed-forward neural network with pre-processing

A two-cavity klystron without a feedback path will operate as what type of circuit?

Description : A two-cavity klystron without a feedback path will operate as what type of circuit?

Last Answer : Amplifier.

Order of the open loop transfer function is_____ to order of closed loop transfer function

Description : Order of the open loop transfer function is _____ to order of closed loop transfer function   (a) not equal (b) equal (c) less than (d) greater than 

Last Answer : Order of the open loop transfer function is equal to order of closed loop transfer function 

A transfer function has a second order denominator and constant gain in the numerator

Description : A transfer function has a second order denominator and constant gain in the numerator

Last Answer : A transfer function has a second order denominator and constant gain in the numerator the system has two zeros at infinity

With the knowledge of the state variable representation of a plant the transfer function of the plant

Description : With the knowledge of the state variable representation of a plant the transfer function of the plant 

Last Answer : With the knowledge of the state variable representation of a plant the transfer function of the plant can be determined completely

The state equations in the phase variable canonical form can be obtained from the transfer function by

Description : The state equations in the phase variable canonical form can be obtained from the transfer function by (a) Cascade decomposition (b) Direct decomposition (c) Inverse decomposition (d) Parallel decomposition

Last Answer : The state equations in the phase variable canonical form can be obtained from the transfer function by Direct decomposition

Once the logic of a network is laid out, the project manager will conduct a forward pass and a backward pass through the network. This will provide information regardiC. Resource shortages, high risk activities D. The high risk activities, non-critical pathng ______ and will identify the________. A. The total duration of the project, critical path B. The slack for each activity, high risk activities

Description :  Once the logic of a network is laid out, the project manager will conduct a forward  pass and a backward pass through the network. This will provide information regarding  ______ and will identify ... C. Resource shortages, high risk activities D. The high risk activities, non-critical path

Last Answer : A. The total duration of the project, critical path

A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Description : A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Last Answer : a. 3

Maximum acceleration in above problem is a.107 dynes b.2?2/3 m/s2 c.?2/s m/s2 d.3?2 m/s2 e.4?2/9 m/s2

Description : Maximum acceleration in above problem is a.107 dynes b.2?2/3 m/s2 c.?2/s m/s2 d.3?2 m/s2 e.4?2/9 m/s2

Last Answer : e. 4?2/9 m/s2

An automobile is travelling at 25 m/s. It takes 0.3 second to apply the brakes after which the deceleration is 6 m/s2. How far, in meters, does the automobile travel before it stops? a.45 b.107 dynes c.40 d.50 e.60

Description : An automobile is travelling at 25 m/s. It takes 0.3 second to apply the brakes after which the deceleration is 6 m/s2. How far, in meters, does the automobile travel before it stops? a.45 b.107 dynes c.40 d.50 e.60

Last Answer : e. 60

A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Description : A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Last Answer : a. 10

An object moves along a straight line with an acceleration of 2 m/s2. If its initial speed is 10 m/s, what will be its speed 2 s later? -Science

Description : An object moves along a straight line with an acceleration of 2 m/s2. If its initial speed is 10 m/s, what will be its speed 2 s later? -Science

Last Answer : u=10 m/s,t=2 s, a=2 m/s2 v=u+atv=u+at v=10+2×2=14v=10+2×2=14 m/s

An object dropped from a cliff falls with a constant acceleration of 10 m/s2. Find its speed 5 s after it was dropped. -Science

Description : An object dropped from a cliff falls with a constant acceleration of 10 m/s2. Find its speed 5 s after it was dropped. -Science

Last Answer : v=u+atv=u+at u=0u=0 v=10×5=50m/sv=10×5=50m/s

If S is stress, Y is Young’s modulus of material of a wire, the energy stored in the wire per unit volume is (a) 2Y/S (b) S/2Y (c) 2S2Y (d) S2/2Y

Description : If S is stress, Y is Young’s modulus of material of a wire, the energy stored in the wire per unit volume is (a) 2Y/S (b) S/2Y (c) 2S2Y (d) S2/2Y

Last Answer : Ans:(d)

The speed of a motor car changes from 18 km/h to 72 km/h in 5 s. Its acceleration is (a) 6 m/s2 (b) 5 m/s2 (c) 4 m/s2 (d) 3 m/s2

Description : The speed of a motor car changes from 18 km/h to 72 km/h in 5 s. Its acceleration is (a) 6 m/s2 (b) 5 m/s2 (c) 4 m/s2 (d) 3 m/s2

Last Answer : Ans:(d)

A car starts from rest and moves on a straight road with a uniform acceleration of 10 m/s2 for the first 10 s. During the next 10 s, the car move s with the velocity it has attained. What is the total distance covered by the car in 20 s? (a) 500 m (b) 1000 m (c) 1,500 m (d) 2,000 m

Description : A car starts from rest and moves on a straight road with a uniform acceleration of 10 m/s2 for the first 10 s. During the next 10 s, the car move s with the velocity it has attained. What is the total distance covered by the car in 20 s? (a) 500 m (b) 1000 m (c) 1,500 m (d) 2,000 m

Last Answer : Ans:(c)

A ball moving with uniform velocity comes to rest in a distance of 72 m in 6 s. Its initial velocity and retardation are (a) 12 m/s and 2 m/s2 (b) 12 m/s and 4 m/s2 (c) 24 m/s and 8 m/s2 (d) 24 m/s and 4 m/s2

Description : A ball moving with uniform velocity comes to rest in a distance of 72 m in 6 s. Its initial velocity and retardation are (a) 12 m/s and 2 m/s2 (b) 12 m/s and 4 m/s2 (c) 24 m/s and 8 m/s2 (d) 24 m/s and 4 m/s2

Last Answer : Ans:(d)

The unit of dynamic viscosity in S.I. units is (A) N-m/s2 (B) N-s/m2 (C) Poise (D) Stoke

Description : The unit of dynamic viscosity in S.I. units is (A) N-m/s2 (B) N-s/m2 (C) Poise (D) Stoke

Last Answer : Answer: Option B

A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one element (s2) if δ(q, λ, b) is not empty then δ(q, c, b) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Description : A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one ... ) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Last Answer : (C) both s1 and s2