The state equations in the phase variable canonical form can be obtained from the transfer function by

The state equations in the phase variable canonical form can be obtained from the transfer function by (a) Cascade decomposition (b) Direct decomposition (c) Inverse decomposition (d) Parallel decomposition
by

1 Answer

Answer :

The state equations in the phase variable canonical form can be obtained from the transfer function by Direct decomposition

by

Related questions

All the constraints are expressed as equations and the right hand side of each constraint and all variables are non-negative is called_______ a. Canonical variable b. Canonical form c. Canonical solution d. Both a & b

Description : All the constraints are expressed as equations and the right hand side of each constraint and all variables are non-negative is called_______ a. Canonical variable b. Canonical form c. Canonical solution d. Both a & b

Last Answer : b. Canonical form

With the knowledge of the state variable representation of a plant the transfer function of the plant

Description : With the knowledge of the state variable representation of a plant the transfer function of the plant 

Last Answer : With the knowledge of the state variable representation of a plant the transfer function of the plant can be determined completely

Which form of redirect/meta tag will transfer the most authority to the directed page? A. Canonical B. 301 C. 302 D. 303

Description : Which form of redirect/meta tag will transfer the most authority to the directed page? A. Canonical B. 301 C. 302 D. 303

Last Answer : B. 301

The loop transfer of a system is G(s) H(s) = 5/(s+1) (2s+1)(3s+1) which has the phase crossover frequency

Description : The loop transfer of a system is G(s) H(s) = 5/(s+1) (2s+1)(3s+1) which has the phase crossover frequency fc = 0.16 Hz. The gain margin (dB) of the system is  (a) 6 (b) 4 (c) 2 (d) 0

Last Answer : The loop transfer of a system is G(s) H(s) = 5/(s+1) (2s+1)(3s+1) which has the phase crossover frequency fc = 0.16 Hz. The gain margin (dB) of the system is 6

The topic in the publish method is in which form? a) Binomial form b) Canonical form c) Nominal form d) Message form

Description : The topic in the publish method is in which form? a) Binomial form b) Canonical form c) Nominal form d) Message form

Last Answer : Canonical form

Order of the open loop transfer function is_____ to order of closed loop transfer function

Description : Order of the open loop transfer function is _____ to order of closed loop transfer function   (a) not equal (b) equal (c) less than (d) greater than 

Last Answer : Order of the open loop transfer function is equal to order of closed loop transfer function 

A transfer function has a second order denominator and constant gain in the numerator

Description : A transfer function has a second order denominator and constant gain in the numerator

Last Answer : A transfer function has a second order denominator and constant gain in the numerator the system has two zeros at infinity

The dc gain of the system represented by the transfer function G(s)=(s+6)/((s+2)(s+3)) is...

Description : The dc gain of the system represented by the transfer function G(s)=(s+6)/((s+2)(s+3)) is  A) 1 B) 2 C) 5 D) 6

Last Answer : For dc gain substitute s=0 in the given transfer function Ans:option A

Who was the greatest Buddhist commentator of the Buddhist canonical literature? -Do You Know?

Description : Who was the greatest Buddhist commentator of the Buddhist canonical literature? -Do You Know?

Last Answer : answer:

What is Canonical URL?

Description : What is Canonical URL?

Last Answer : A canonical link element is an HTML element that helps webmasters prevent duplicate content issues in search engine optimization by specifying the "canonical" or "preferred" version of a web page. It is described in RFC 6596, which went live in April 2012.

Which of the following is not characteristic of resonance? (a) The canonical structures have the constituent atoms in the same relative positions (b) They have nearly the same energy (c) They have the same number of unpaired electrons (d) The actual structure can be represented on paper using the conventional symbols

Description : Which of the following is not characteristic of resonance? (a) The canonical structures have the constituent atoms in the same relative positions (b) They have nearly the same energy (c) ... of unpaired electrons (d) The actual structure can be represented on paper using the conventional symbols

Last Answer : Ans:(d)

Who was the greatest Buddhist commentator of the Buddhist canonical literature?

Description : Who was the greatest Buddhist commentator of the Buddhist canonical  literature?

Last Answer : Ashvaqhosha

Which of the following is true ? (A) Canonical LR parser is LR (1) parser with single look ahead terminal (B) All LR(K) parsers with K > 1 can be transformed into LR(1) parsers. (C) Both (A) and (B) (D) None of the above

Description : Which of the following is true ? (A) Canonical LR parser is LR (1) parser with single look ahead terminal (B) All LR(K) parsers with K > 1 can be transformed into LR(1) parsers. (C) Both (A) and (B) (D) None of the above

Last Answer : (C) Both (A) and (B)

A signal other than the reference input that tends to affect the value of controlled variable is known as ?

Description : A signal other than the reference input that tends to affect the value of controlled variable is known as ?

Last Answer : A signal other than the reference input that tends to affect the value of controlled variable is known as disturbance.

In the following equations , verify whether the given value of the variable is a solution of the equation : -Maths 9th

Description : In the following equations , verify whether the given value of the variable is a solution of the equation : -Maths 9th

Last Answer : (i) If we substitute x = 4, we get L.H.S = x + 4 = 4 + 4 = 8 and R.H.S = 2x = 2 x 4 = 8 ∴ L.H.S = R.H.S. Hence, 4 is a solution of x + 4 = 2x. (ii) If we substitute y = 3, we get L.H.S = y - 7 = 3 - ... S = 2u + 7 = 2(5) + 7 = 10 + 7 = 17 ∴ L.H.S = R.H.S. Hence , 5 is a solution of 3u + 2 = 2u + 7

In the following equations , verify whether the given value of the variable is a solution of the equation : -Maths 9th

Description : In the following equations , verify whether the given value of the variable is a solution of the equation : -Maths 9th

Last Answer : (i) f we substitute x = √2, we get L.H.S. = 2x - 3 = 2(√2) - 3 = 2√2 - 3 and R.H.S = x / 2 - 2 = √2 / 2 - 2 ∴ L.H.S. ≠ R.H.S . Hence, √2 is not a solution of 2x - 3 = x / 2 - 2 (ii) If we substitute ... = 7 ∴ L.H.S. ≠ R.H.S . Hence , -1 is not a solution of 24 - 3 (u - 2) = u + 8

In the following equations , verify whether the given value of the variable is a solution of the equation : -Maths 9th

Description : In the following equations , verify whether the given value of the variable is a solution of the equation : -Maths 9th

Last Answer : (i) If we substitute x = 4, we get L.H.S = x + 4 = 4 + 4 = 8 and R.H.S = 2x = 2 x 4 = 8 ∴ L.H.S = R.H.S. Hence, 4 is a solution of x + 4 = 2x. (ii) If we substitute y = 3, we get L.H.S = y - 7 = 3 - ... S = 2u + 7 = 2(5) + 7 = 10 + 7 = 17 ∴ L.H.S = R.H.S. Hence , 5 is a solution of 3u + 2 = 2u + 7

In the following equations , verify whether the given value of the variable is a solution of the equation : -Maths 9th

Description : In the following equations , verify whether the given value of the variable is a solution of the equation : -Maths 9th

Last Answer : (i) f we substitute x = √2, we get L.H.S. = 2x - 3 = 2(√2) - 3 = 2√2 - 3 and R.H.S = x / 2 - 2 = √2 / 2 - 2 ∴ L.H.S. ≠ R.H.S . Hence, √2 is not a solution of 2x - 3 = x / 2 - 2 (ii) If we substitute ... = 7 ∴ L.H.S. ≠ R.H.S . Hence , -1 is not a solution of 24 - 3 (u - 2) = u + 8

If you're asked to solve a system of equations in which there is no linear equation to start with you can sometimes begin by isolating and substituting a variable that is squared in both equations?

Description : If you're asked to solve a system of equations in which there is no linear equation to start with you can sometimes begin by isolating and substituting a variable that is squared in both equations?

Last Answer : 1

Write balanced equations for the reaction of: (i) aluminium when heated in air. Write the name of the product. (ii) iron with steam. Name the product obtained. (iii) calcium with water. Why does calcium start floating in water? -Chemistry

Description : Write balanced equations for the reaction of: (i) aluminium when heated in air. Write the name of the product. (ii) iron with steam. Name the product obtained. (iii) calcium with water. Why does calcium start floating in water? -Chemistry

Last Answer : The bubbles of hydrogen stick to the surface of metal that is why it floats.

Stress Concentration Factor is the ratio of nominal stress obtained by elementary equations for minimum cross- section and highest value of actual stress near discontinuity. a) True b) False

Description : Stress Concentration Factor is the ratio of nominal stress obtained by elementary equations for minimum cross- section and highest value of actual stress near discontinuity. a) True b) False

Last Answer : b) False

The value of m obtained on solving equations : 2n + m =2n – m = √ a) 1/4 b) 0 c) 1/2 d) 3/4

Description : The value of m obtained on solving equations : 2n + m =2n – m = √ a) 1/4 b) 0 c) 1/2 d) 3/4

Last Answer : b) 0

The value of m obtained on solving equations : 2n + m =2n – m = √ a) 1/4 b) 0 c) 1/2 d) 3/4

Description : The value of m obtained on solving equations : 2n + m =2n – m = √ a) 1/4 b) 0 c) 1/2 d) 3/4

Last Answer : b) 0

Which of the following equations is obtained on combining 1st and 2nd law of thermodynamics, for a system of constant mass?(A) dE = Tds - PdV (B) dQ = CvdT + PdV (C) dQ = CpdT + Vdp (D) Tds = dE - PdV

Description : Which of the following equations is obtained on combining 1st and 2nd law of thermodynamics, for a system of constant mass? (A) dE = Tds - PdV (B) dQ = CvdT + PdV (C) dQ = CpdT + Vdp (D) Tds = dE - PdV

Last Answer : (A) dE = Tds - PdV

All analogy equations connecting friction factor and heat transfer co￾efficient apply only to (A) Wall or skin friction (B) Form friction (C) Both (A) and (B) (D) Turbulent flow

Description : All analogy equations connecting friction factor and heat transfer co￾efficient apply only to (A) Wall or skin friction (B) Form friction (C) Both (A) and (B) (D) Turbulent flow

Last Answer : (A) Wall or skin friction

For a system with derivative feedback, forward path transfer is G(s) = I / (s2 + s + 1) and feedback path

Description : For a system with derivative feedback, forward path transfer is G(s) = I / (s2 + s + 1) and feedback path transfer is H(s) = Ks. What is the value of K to obtain a critically-damped closed loop transient response.  (a) 0.5 (b) 0.707 (c) 1 (d) 1.414

Last Answer : For a system with derivative feedback, forward path transfer is G(s) = I / (s2 + s + 1) and feedback path transfer is H(s) = Ks. What is the value of K to obtain a critically-damped closed loop transient response.  (a) 0.5 (b) 0.707 (c) 1 (d) 1.414

For a stable feedback control system, the phase margin is

Description : For a stable feedback control system, the phase margin is  a) always positive b) always negative c) may be positive or negative d) always greater than 180o

Last Answer : For a stable feedback control system, the phase margin is always positive

For the minimum phase system, which of these is the most appropriate one ?

Description : For the minimum phase system, which of these is the most appropriate one ?  (A) All poles are inside the unit circle in the z-plane  (B) All zeros are inside the unit circle in the z-plane  (C) ... the unit circle in the z-plane  (D) All poles and zeros are outside the unit circle in the z-plane

Last Answer : For the minimum phase system, which of these is the most appropriate one ?  (A) All poles are inside the unit circle in the z-plane  (B) All zeros are inside the unit circle in the z-plane  ... unit circle in the z-plane  (D) All poles and zeros are outside the unit circle in the z-plane

Phase margin is the amount of angle to make the system

Description : Phase margin is the amount of angle to make the system  (1) Oscillatory (2) Stable (3) Unstable (4) Exponential

Last Answer : Phase margin is the amount of angle to make the system Unstable 

In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over...

Description : In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over frequency is - 125°.. The phase margin of the system is (a) - 125° (b) - 55° (c) 55° (d) 125°

Last Answer : In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over frequency is - 125°.. The phase margin of the system is 55°

A phase lag lead network introduces in the output?

Description : A phase lag lead network introduces in the output?

Last Answer : A phase lag lead network introduces in the output lag at low frequencies and lead at high frequencies.

The phase lag produced by transportation relays?

Description : The phase lag produced by transportation relays?

Last Answer : The phase lag produced by transportation relays increases linearly with frequency.

Pick out the wrong statement pertaining to the analogy between equations of heat and mass transfer operations. (A) Sherwood number in mass transfer is analogous to Nusselt number in heat transfer (B) Prandtl number in heat transfer is analogous to Schmidt number in mass transfer (C) Reynolds number in mass transfer is analogous to Grashoff number in heat transfer (D) Reynolds number remains the same in both heat and mass transfer

Description : Pick out the wrong statement pertaining to the analogy between equations of heat and mass transfer operations. (A) Sherwood number in mass transfer is analogous to Nusselt number in heat transfer ... heat transfer (D) Reynolds number remains the same in both heat and mass transfer

Last Answer : (C) Reynolds number in mass transfer is analogous to Grashoff number in heat transfer

The transfer function of a phase lead compensator is found to be the form (s+z1 ) / (s + p1 ) and that...

Description : The transfer function of a phase lead compensator is found to be the form (s+z1 ) / (s + p1 ) and that of a lag compensator to be of the form (s+z2 ) / (s + p2 ). Then which of the following conditions must be satisfied?  ... (B) z1 > p1 and z2 < p2 (C) z1 < p1 and z2 < p2 (D) z1 < p1 and z2 > p2

Last Answer : A 

Which of the following is true for Virial equation of state? (A) Virial co-efficients are universal constants (B) Virial co-efficients 'B' represents three body interactions (C) Virial co-efficients are function of temperature only (D) For some gases, Virial equations and ideal gas equations are the same

Description : Which of the following is true for Virial equation of state? (A) Virial co-efficients are universal constants (B) Virial co-efficients 'B' represents three body interactions (C) Virial co-efficients ... of temperature only (D) For some gases, Virial equations and ideal gas equations are the same

Last Answer : (C) Virial co-efficients are function of temperature only

A figure obtained by dividing the sum of all variable by their total number of variables.

Description : A figure obtained by dividing the sum of all variable by their total number of variables.

Last Answer : Ans. Averages/Arithmetic Mean

The rule of Universal Instantiation (UI for short) says that we can infer any sentence obtained by substituting a ground term (a term without variables) for the variable. a) True b) False

Description : The rule of Universal Instantiation (UI for short) says that we can infer any sentence obtained by substituting a ground term (a term without variables) for the variable. a) True b) False

Last Answer : a) True

___arrow represents the value obtained by evaluating right side expression/variable to the left side variable. a. Forth b. Inbetween co. Back d. None of these

Description : ___arrow represents the value obtained by evaluating right side expression/variable to the left side variable. a. Forth b. Inbetween co. Back d. None of these

Last Answer : co. Back

………………….. implies that all subnets obtained from the same subnet mask. A) Static subnetting B) Dynamic subnetting C) Variable length subnetting D) Both B and C

Description : ………………….. implies that all subnets obtained from the same subnet mask. A) Static subnetting B) Dynamic subnetting C) Variable length subnetting D) Both B and C

Last Answer : A) Static subnetting

........ implies that all subnets obtained from the same network use the subnet mask. A) Static subnetting B) Dynamic Subnetting C) Variable length subnetting D) Both B and C

Description : ........ implies that all subnets obtained from the same network use the subnet mask. A) Static subnetting B) Dynamic Subnetting C) Variable length subnetting D) Both B and C

Last Answer : A) Static subnetting

............ implies that all subnets obtained from the same network use the subnet mask. A) Static subnetting B) Dynamic Subnetting C) Variable length subnetting D) Both B and C

Description : ............ implies that all subnets obtained from the same network use the subnet mask. A) Static subnetting B) Dynamic Subnetting C) Variable length subnetting D) Both B and C

Last Answer : A) Static subnetting

In context of net operating profit, which of the following statements are true? A. If all costs are variable, the amount of profit obtained in marginal costing and absorption costing will be same. B. If the volume of sales and output is equal in a period, profit will be same in absorption costing and marginal costing. C. Both a and b D. None of the above

Description : In context of net operating profit, which of the following statements are true? A. If all costs are variable, the amount of profit obtained in marginal costing and absorption costing will be same. B. If ... same in absorption costing and marginal costing. C. Both a and b D. None of the above

Last Answer : C. Both a and b

At any iteration of simplex method, if Δj (Zj – Cj) corresponding to any nonbasic variable Xj is obtained as zero, the solution under the test is (A) Degenerate solution (B) Unbounded solution (C) Alternative solution (D) Optimal solution

Description : At any iteration of simplex method, if Δj (Zj – Cj) corresponding to any nonbasic variable Xj is obtained as zero, the solution under the test is (A) Degenerate solution (B) Unbounded solution (C) Alternative solution (D) Optimal solution

Last Answer : (C) Alternative solution

If a step function is applied to the input of a system and the output...

Description : If a step function is applied to the input of a system and the output remains below a certain level for all the time, the system is?

Last Answer : If a step function is applied to the input of a system and the output remains below a certain level for all the time, the system is not necessarily stable.

The output of a feedback control system must be a function of?

Description : The output of a feedback control system must be a function of?

Last Answer : The output of a feedback control system must be a function of reference and output.

A minimum phase transfer function has...

Description :  A minimum phase transfer function has: a) poles in the left half of the s -plane  b) zeros in the left half of the s -plane  c) poles in the left half of the s -plane and zeros in the right ... plane  d) no poles and zeros in the right half of the s -plane or on the jw - axis excluding origin

Last Answer :  A minimum phase transfer function has: no poles and zeros in the right half of the s -plane or on the jw - axis excluding origin

Solve the following equations (where `[*]` denotes greatest integer function and `{*}` represent fractional part function and sgn represents signum fu

Description : Solve the following equations (where `[*]` denotes greatest integer function and `{*}` represent fractional part function and sgn represents signum fu

Last Answer : Solve the following equations (where `[*]` denotes greatest integer function and `{*}` represent fractional part function ... 2[x]=3x`, `0 le x le 2`

Solve the following equations (where `[*]` dentoes greatest integer function and `{*}` represent fractional part function) `(i) 2[x]+3[x]=4x-1` `(ii)

Description : Solve the following equations (where `[*]` dentoes greatest integer function and `{*}` represent fractional part function) `(i) 2[x]+3[x]=4x-1` `(ii)

Last Answer : Solve the following equations (where `[*]` dentoes greatest integer function and `{*}` represent fractional part function) ... }` `(iii) [x]+2{-x}=3x`

53. While plotting constraints on a graph paper, terminal points on both the axes are connected by straight line because a. The resources are limited in supply b. The objective function as a linear function c. The constraints are linear equations or inequalities d. All of the above

Description : 53. While plotting constraints on a graph paper, terminal points on both the axes are connected by straight line because a. The resources are limited in supply b. The objective function as a linear function c. The constraints are linear equations or inequalities d. All of the above

Last Answer : c. The constraints are linear equations or inequalities

48. The graphical method of LP problem uses a. Objective function equation b. Constraint equations c. Linear equations d. All of the above

Description : 48. The graphical method of LP problem uses a. Objective function equation b. Constraint equations c. Linear equations d. All of the above

Last Answer : d. All of the above