What is the use of three way valves ?

1 Answer

Answer :

Three way control valves are only used on special systems, where a dividing or mixture of flows according to a controlled ratio is required.

Related questions

Description : What is the use of Angle valves ?

Last Answer : Angle valves are used where very high pressure drops are required and under very severe conditions. Where the conventional type of valve would be damaged by erosion. 

Description : What is the use of butterfly valves ?

Last Answer : Butterfly valves are used only in systems where a small pressure drop across the valve is allowed. The butterfly is fully open when the disc rotates by 90. A drawback of this valve is that even a very small angular displacement produces a big change in flow.

Description : What are the advantages of Camflex valves ?

Last Answer : Camflex valves are intermediates between globe valve and butterfly valve. The plug rotates 60' for full opening. Advantages: 1. Actuator forces required are very less. 2.Extended bonnet and hence can be used ... on high temp. and very low  Temperature. 3. Variations in flow. 4. Light weight.

Description : What are the different types of control valves ?  

Last Answer : The commonly used control valves can be divided as follows. 1. Depending on Action. 2. Depending on the Body. 1. Depending on action: Depending on action there are two types of control valves, (1) ... valves single or double seated. 2. Angle valves. 3. Butterfly valves. 4. Three way valves. 

Description : What is a control valves ? 

Last Answer : A control valve is the final control element, which directly changes the valve of the manipulated variable by changing the rate of flow of control agent. A control valve consists of an operator and valve body. ... 3 psi on the diaphragm the value is closed and 15 psi air signal it in fully open.  

Description : What is the use of booster relays ?  

Last Answer : Booster relays are essentially air load, self contained pressure regulators. They are classified into three broad groups :  1. Volume Boosters : These are used to multiply the available volume of ... 3. Reversing Relays : This produces a decreasing output signal for an increasing input  signal.

Description : What is the use of link connected to the valve positioner ?

Last Answer : The link serves as the feed back to the value. Ant valve movement is sensed by this link. Sometimes due to line pressure changes on H.P. service the valve position may be changed, the ... this change and the positioner will produce an output which will operate the valve to the original position.

Description : What is the use of a valve positioner ?

Last Answer : The valve positioner is used for following reasons : 1. Quick Action control valve. 2. Valve hysteresis. 3. Valves used on viscous liquids. 4. Split Range. 5. Line pressure changes on valve. 6. Valve Bench set not standard. 7. Reversing valve operation. 

Description : What types of bonnets would you use of high temp. and very low temp. ?

Last Answer : High temperature: Bonnets are provided with radiation fins to prevent glad packing from getting damaged.  On very low temperature: Extended bonnets are used to prevent gland packing from getting freezed

Description : What is the use of double seated valve ?

Last Answer : In double seated valves the upward and downward forces on the plug due to reduction of fluid pressure are nearly equalized. It is generally used on bigger size valves and high pressure systems. Actuator forces required are less i.e. A small size actuator. 

Description : What is the use of single seated valve ?

Last Answer : The single seated valve is used on smaller sizes, and in valve of larger sizes, where an absolute shut off is required. The use of single seated valve is limited by pressure drop across the valve in the closed or almost closed position.  

Description : How will you select the control valve characteristics ?

Last Answer : The graphic display of flow various lift shows then the Desired or inherent characteristic is changed by variations pressure drop. This occurs as the process changes from condition where most of pressure drop takes ... the valve. b) The pressure drop across a valve should be as low as possible. 

Description : How will you change the action of a control valve ? 

Last Answer : 1. If the control valve is without bottom cap. The actual needs to be changed. 2. If bottom cap is provided. a) Disconnect the stem from the actuator stem. b) Separate the body from the bonnet. ... back the stem to the actuator stem. h) Fix back the bottom cap. i) Calibrate the valve. 

Description : How will you change the valve characteristics with positioner ?

Last Answer : The positioner contains different types of came in it. selection of the proper cams in it.By selection of the proper cam the valve opening characteristics can be changed. 

Description : What is a solenoid valve ? Where it is used ?

Last Answer :  A solenoid is electrically operated valve. It consist of a solenoid ( coil ) in which a magnetic plunger moves which is connected to the plug and tends to open or close the value. There are two types ... :  1. Normally open 2. Normally closed  USE : It is used for safety purpose. 

Description : What are the different valve characteristic ?

Last Answer : The different types of valve characteristic are : 1. Linear 2. Equal Percentage 3. Quick Opening. 1.Linear: The valve opening to flow rate is a linear curve 2.Equal percentage: For ... At small opening the increments in flow rate is more. At higher opening the flow rate becomes steady.  

Description : What is a cage valve ? 

Last Answer : A cage valve uses a piston with piston ring seal attached to the single seated valve "plug". Here the hydrostatic forces acting on the top or the piston or below the valve plug tend to cancel out. The seat ring is clamped in by a cage. Cage valves are generally used for noise reduction. 

Description : What are the different types of plugs ?

Last Answer : The different types of plugs are generally used are : ( 1 ) V. port plug ( 2 ) Contoured plug V-port plug: Ported plug are generally used on double seated valves. This is because ... balance area. Contoured plug: Contoured plugs are generally used on single seated valve with small trim sizes. 

Description : When can a by pass be not used on a positioner ? 

Last Answer : A by pass on a positioner cannot be used when : 1. Split Range operation. 2. Reverse Acting Positioner. 3. Valve bench set not standard. 

Description : How will you work on a control valve while it is line ?

Last Answer : While the control valve is in line or in service, it has to be by passed and secondly the line to be depressurized and drained. 

Description : Foot valves provided in pumps are __________ valves. (A) Relief (B) Three/four way (C) Pressure reducing (D) Directional contro

Last Answer : (D) Directional control

Description : What three advantages do transistors have over valves?

Last Answer : Need answer

Description : What are three advantages that transistors have over valves?

Last Answer : 6u76yu

Description : How many valves does a human heart have? (1) Four (2) Three (3) Two (4) One

Last Answer : (1) Four Explanation: Human heart has four valves: two atrioventricular (AV) valves, which are between the atria and the ventricles, are the mitral valve and the tricuspid valve; and two ... the pulmonary valve. A heart valve normally allows blood flow in only one direction through the heart.

Description : How many valves does a human heart have? (1) Four (2) Three (3) Two (4) One

Last Answer : Four

Description : Is there ANY way to sell some industrial valves for more than scrap value without having paperwork?

Last Answer : Have you tried Craigslist or Ebay?

Description : What period did Valves for brass instruments come to use?

Last Answer : Modern piston valves (the type that move up and down) weredeveloped in the 1830s. Rotary valves were introduced some 20 yearsearlier.

Description : Due to constant use both inlet and exhaust valves and their seats subjected to a) stress wear b) strain wear c) mechanical wear d) tensile wear

Last Answer : c) mechanical wear

Description : Doctors use stethoscope to hear the sounds produced during each cardiac cycle. The second sound is heard when (a) AV node receives signal from SA node (b) AV valves open up (c) Ventricular ... blood from atria (d) Semilunar valves close down after the blood flows into vessels from ventricles.

Last Answer : (d) Semilunar valves close down after the blood flows into vessels from ventricles

Description : How can i control 4 sprinkler valves so that they actuate sequentially every 2-3 minutes, one at a time?

Last Answer : Rewire the timer circuitry on a rainbird?

Description : What is the function of venous valves? -Biology

Last Answer : answer:

Description : Why valves are needed in the veins? -Biology

Last Answer : answer:

Description : Assertion` :` LUBB (First Sound) is of shorter duration and sharp sound. Reason `:` It is created by the closure of the semiluar valves.

Last Answer : Assertion` :` LUBB (First Sound) is of shorter duration and sharp sound. Reason `:` It is created ... False. D. If both Assertion & Reason are false.

Description : Assertion `:` The opening between the right atrium and the right ventricle is guarded by a bicuspid or mitral valve. Reason `:` The valves in the hear

Last Answer : Assertion `:` The opening between the right atrium and the right ventricle is guarded by a bicuspid or ... . D. If both Assertion & Reason are false.

Description : Assertion `:` In joint diastole, all the four chamber of heart are in relaxed state. Reason `:` The tricuspid and bicuspid valves are open and semilun

Last Answer : Assertion `:` In joint diastole, all the four chamber of heart are in relaxed state. Reason `:` ... False. D. If both Assertion & Reason are false.

Description : In circulatory system, valves occur in

Last Answer : In circulatory system, valves occur in A. Heart and blood bessels of both vertebrates and ... and invertebrate hearts and their blood vessels.

Description : The valves of the heart are attached to papillary muscles by `:-`

Last Answer : The valves of the heart are attached to papillary muscles by `:-` A. Columnae camae B. Chordae tendinae C. Tendinae D. Pectinati muscles

Description : How do the valves work on brass intruments?

Last Answer : Each valve has two sets of holes, which direct the air flow either directly through, or when the valve is pressed, through additional tubing. By making the entire instrument slightly longer, it lowers the pitch.

Description : How do the valves work on the brass instruments?

Last Answer : The valves in a brass instrument re-direct the air intodifferent parts of the tubing. Each valve controls a different partof the instrument. The longer the tubing, the lower the note willbe.

Description : What was the role of the valves in the colossus computer?

Last Answer : the first electronic computers were built before the inventionof the transistor or integrated circuit chip. They used vacuumtubes for the processing and temporary memory. In Britain thosetubes were called valves.

Description : How many Major valves in the human body?

Last Answer : Feel Free to Answer

Description : What fibrous structure functions to anchor the atrioventricular valves in a closed position?

Last Answer : Need answer

Description : What was the role of the valves in the colossus?

Last Answer : the first electronic computers were built before the inventionof the transistor or integrated circuit chip. They used vacuumtubes for the processing and temporary memory. In Britain thosetubes were called valves.

Description : Are all air valves pneumatic?

Last Answer : Pneumatic is defined as air driven and therefore the two terms are synonomous. However pneumatic is not as frequently used in describing a valve.

Description : Do propane tanks have air valves?

Last Answer : It doesn't look like they do. When you search for "propane tanks" "air valves" (both quoted), the low number of results suggests they don't go together. A propane valve is slightly different ... must be depressed before gas will flow. Valves for non-flammable gas don't generally have this feature.

Description : Where can I learn about dispensing needle valves?

Last Answer : Dispensing Needle Valves provide precise fluid dispensing. You can get more information by visiting http://process-equipment.globalspec.com and entering "Dispensing Needle Valves" in the search box.

Description : Is there a repair shop specializing in hydraulic valves in Wichita, Kansas?

Last Answer : Cylinder head repair works on them but did not find a specialist for only that 1035 S West St, Wichita, KS‎ - (316) 945-4747‎

Description : The Function of Heart Valves?

Last Answer : The normal human heart has four valves. Valves, when working properly, allow blood to flow in one direction only to the different chambers of the heart. There four valves are called the mitral ... surgery can usually correct faulty valves and restore proper blood flow to the chambers of the heart.

Description : Possible Damage To The Heart Valves?

Last Answer : The heart is a specialized muscle that delivers the power to circulate the blood throughout the body. Comprised of four chambers and a series of valves, it is in constant operation and ... organ functioning properly, and regular checkups to determine if there are any problems is highly recommended.

Description : How can I make my heart valves healthier?

Last Answer : You can get a heart valve surgery to fix that. You can also avoid eating oily food that can clog up the valves. By not doing so, you are at risk of heart attacks.