For a 1.8, 2-phase bipolar stepper motor, the stepping rate is 100 steps/second. The rotational speed of the

For a 1.8o, 2-phase bipolar stepper motor, the stepping rate is 100 steps/second. The rotational speed of the motor in rpm is 

(A) 15 (B) 30 (C) 60 (D) 90

by

1 Answer

Answer :

For a 1.8o, 2-phase bipolar stepper motor, the stepping rate is 100 steps/second. The rotational speed of the motor in rpm is 30 

by

Related questions

The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min

Description : The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min (A) 100 rpm (B) 200 rpm (C) 400 rpm (D) 800 rpm

Last Answer : The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min 200 rpm

The number of poles of 8/6 stepper motor can be :

Description : The number of poles of 8/6 stepper motor can be :

Last Answer : The number of poles of 8/6 stepper motor can be : 4

A 1.8°step, 4-phase stepper motor has a total of 40 teeth on 8 pole of stator. The number of rotor teeth for their rotor will be (A) 40 (B) 50 (C) 100 (D) 80

Description : A 1.8°step, 4-phase stepper motor has a total of 40 teeth on 8 pole of stator. The number of rotor teeth for their rotor will be (A) 40 (B) 50 (C) 100 (D) 80

Last Answer : (B) 50

In a stepper motor, the detent torque means

Description : In a stepper motor, the detent torque means  (A) minimum of the static torque with the phase winding excited (B) maximum of the static torque with the phase winding excited (C) minimum of ... torque with the phase winding unexcited (D) maximum of the static torque with the phase winding unexcited

Last Answer : In a stepper motor, the detent torque means maximum of the static torque with the phase winding unexcited

An 1.8° step, 4 -phase stepper motor has 40 teeth on 8 poles of the stator. The number of rotor teeth for...

Description : An 1.8° step, 4 -phase stepper motor has 40 teeth on 8 poles of the stator. The number of rotor teeth for their rotor will be: (A) 40 (B) 50 (C) 100 (D) 80

Last Answer : An 1.8° step, 4 -phase stepper motor has 40 teeth on 8 poles of the stator. The number of rotor teeth for their rotor will be: 50

The torque, in a _____________is proportional to the square of the armature current (A) DC shunt motor (B) stepper motor (C) 2-phase servomotor (D) DC series motor

Description : The torque, in a _____________is proportional to the square of the armature current (A) DC shunt motor (B) stepper motor (C) 2-phase servomotor (D) DC series motor

Last Answer : (D) DC series motor

An a.c. tachometer is just a ________with one phase excited from the carrier frequency. (A) two-phase A.C. servomotor (B) two-phase induction motor (C) A.C. operated universal motor (D) hybrid stepper motor.

Description : An a.c. tachometer is just a ________with one phase excited from the carrier frequency. (A) two-phase A.C. servomotor (B) two-phase induction motor (C) A.C. operated universal motor (D) hybrid stepper motor.

Last Answer : Ans: D This is a special purpose machine whose stator coil can be energized by electronically switched current.

A stepper motor is (A) a dc motor. (B) a single-phase ac motor. (C) a multi-phase motor. (D) a two phase motor.

Description : A stepper motor is (A) a dc motor. (B) a single-phase ac motor. (C) a multi-phase motor. (D) a two phase motor.

Last Answer : Ans: D Stepper motor works on 1-phase-ON or 2-phase –ON modes of operation

Stepper motors are used in

Description : Stepper motors are used in  (1) printers (2) lifts (3) amplifiers (4) oscillators

Last Answer : Stepper motors are used in printers 

Torque developed by a three-phase, 400V, induction motor is 100 N -m. If the applied voltage is reduced to

Description : Torque developed by a three-phase, 400V, induction motor is 100 N -m. If the applied voltage is reduced to 200-V, the d'veloped torque will be

Last Answer : Torque developed by a three-phase, 400V, induction motor is 100 N -m. If the applied voltage is reduced to 200-V, the d'veloped torque will be 25 N -m

The speed of a three-phase induction motor is controlled by variable voltage variable frequency control

Description : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque  (1) Decreases (2) Increases (3) Remains constant (4) None of the above

Last Answer : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque Increases 

A 3-phase, 4-pole, 50Hz induction motor runs at a speed of 1440 rpm. The rotating field produced by the rotor

Description : A 3-phase, 4-pole, 50Hz induction motor runs at a speed of 1440 rpm. The rotating field produced by the rotor rotates at a speed of ________ rpm with respect to stator field. (A) 1500 (B) 0 (C) 1440 (D) 60

Last Answer : 0

In a 3-phase slip-ring induction motor, the slip at some speed is 0.05. The speed is reduced by inserting an

Description : In a 3-phase slip-ring induction motor, the slip at some speed is 0.05. The speed is reduced by inserting an external resistance in the rotor circuit and the slip is 0.15. If the rotor winding resistance per phase is 0.2 Ω, the external resistance is (A) 0.2 Ω (B) 0.3 Ω (C) 0.4 Ω (D) 0.5 Ω

Last Answer : In a 3-phase slip-ring induction motor, the slip at some speed is 0.05. The speed is reduced by inserting an external resistance in the rotor circuit and the slip is 0.15. If the rotor winding resistance per phase is 0.2 Ω, the external resistance is 0.3 Ω

speed control methods of three phase induction motor?

Description : speed control methods of three phase induction motor?

Last Answer : Speed control of three phase induction motor

A permanent magnet stepper motor with 8 poles in stator and 6 poles in rotor will have a step angle of

Description : A permanent magnet stepper motor with 8 poles in stator and 6 poles in rotor will have a step angle of (a) 7.5° (b) 15° (c) 30° (d) 60°

Last Answer : d

A 400 V, 50 Hz 30 hp, three-phase induction motor is drawing 50 A current at 0.8 power factor lagging.

Description : A 400 V, 50 Hz 30 hp, three-phase induction motor is drawing 50 A current at 0.8 power factor lagging. The stator and rotor copper losses are 1.5 kW and 900 W respectively. The friction and windage losses are 1050 W and the ... the motor will be (A) 23.06 kW (B) 24.11 kW (C) 25.01 kW (D) 26.21 kW

Last Answer : A 400 V, 50 Hz 30 hp, three-phase induction motor is drawing 50 A current at 0.8 power factor lagging. The stator and rotor copper losses are 1.5 kW and 900 W respectively. The friction and windage losses are 1050 W and the core losses are 1200 W. The air-gap power of the motor will be 25.01 kW

An 8-pole, 50Hz, three-phase induction motor is running at 705rpm and has a rotor copper loss of 5kW.

Description : An 8-pole, 50Hz, three-phase induction motor is running at 705rpm and has a rotor copper loss of 5kW. Its rotor input is (A) 5.06 kW (B) 0.3 kW (C) 100 kW (D) 83.33 kW

Last Answer : An 8-pole, 50Hz, three-phase induction motor is running at 705rpm and has a rotor copper loss of 5kW. Its rotor input is 83.33 kW

The torque developed by any 3-phase induction motor at 0.8 p.u. slip is

Description : The torque developed by any 3-phase induction motor at 0.8 p.u. slip is (A) Full-load torque (B) unstable torque (C) starting torque (D) break down

Last Answer : The torque developed by any 3-phase induction motor at 0.8 p.u. slip is unstable torque

What is a stepper motor in Arduino?

Description : What is a stepper motor in Arduino?

Last Answer : A stepper motor in Arduino is a type of motor that can be used for precise control of position, speed, and acceleration.

What is a stepper motor in Arduino?

Description : What is a stepper motor in Arduino?

Last Answer : A stepper motor is a type of motor used in Arduino projects that can rotate to a specific position based on a signal sent by an Arduino board.

Programming a NEMA 17 stepper motor to microstep with an Arduino?

Description : Programming a NEMA 17 stepper motor to microstep with an Arduino?

Last Answer : There are literally thousands of arduino code examples out there. This is something you should figure out on your own because the act of doing so will make you a better tinkerer. A typical stepper will have like ... digital I/o pins to output the step sequence. Even an uno or mini pro will do that.

Selecting a correct DC stepper motor for a project?

Description : Selecting a correct DC stepper motor for a project?

Last Answer : You will need to calculate the moment of inertia of the shaft you are turning so you can determine the required torque. You will get that after you determine the peak acceleration from the velocity ... Once you have acceleration, displacement, and moment of inertia you can size the motor for power.

Stepper Motor What ?

Last Answer : Stepper Motor Such One Kind of Motor Which Equal In the corner Rotation Generated By To whom Step To say Is Since Step by step Step by step Equal In the corner Rotation Creation By So This one Stepper Motor Says.

Where is the stepper motor located in peugeot?

Description : Where is the stepper motor located in peugeot?

Last Answer : Need answer

How do I clean a stepper motor Peugeot 206?

Description : How do I clean a stepper motor Peugeot 206?

Last Answer : Need answer

How much does it cost to get a replacement stepper motor?

Description : How much does it cost to get a replacement stepper motor?

Last Answer : The cost for a replacement stepper motor wil depend greatly on the exact type of motor to be relced. Stpper motors are availbl in 100's of varieties at the low end th cost is $25,but can reach into the thousands.

What's the purpose of a stepper motor?

Description : What's the purpose of a stepper motor?

Last Answer : Industrial applications of a stepper motor are in multi-axis machine CNC machines.They are also commonly usd in are used in floppy disk drives, flatbed scanners,and computer printers.

What is a stepper motor driver used for?

Description : What is a stepper motor driver used for?

Last Answer : You can find good cheap stepper motor drivers rebuilt online at a hobby electronics website. the driver tell the stepper motor how many steps to take at a time.

What Is Stepper Motor. what Is Its Uses?

Description : What Is Stepper Motor. what Is Its Uses?

Last Answer : Stepper motor is the electrical machine which act upon input pulse applied to it. it is one type of synchronous motor which runs in steps in either direction instead of running in complete cycle.so, in automation parts it is used.

In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.

What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Description : What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Last Answer : Actuator arm assembly.

A 3 stack stepper motor with 12 numbers of rotor teeth has a step angle of ____________. (A) 12° (B) 8° (C) 24° (D) 10°

Description : A 3 stack stepper motor with 12 numbers of rotor teeth has a step angle of ____________. (A) 12° (B) 8° (C) 24° (D) 10°

Last Answer : Ans. D Given m = 3, Nr = 12 Step angle = 360 / m x Nr = 360 /3 x 12 = 10°

In a stepper motor the angular displacement (A) can be precisely controlled. (B) it cannot be readily interfaced with micro computer based controller. (C) the angular displacement cannot be precisely controlled. (D) it cannot be used for positioning of work tables and tools in NC machines.

Description : In a stepper motor the angular displacement (A) can be precisely controlled. (B) it cannot be readily interfaced with micro computer based controller. (C) the angular displacement cannot be precisely controlled. (D) it cannot be used for positioning of work tables and tools in NC machines.

Last Answer : (A) can be precisely controlled.

List applications of stepper motor.

Description : List applications of stepper motor.

Last Answer : Applications of Stepper Motor: 1) Computer controlled systems 2) Numerical control of machine tools 3) Tape drives 4) Floppy disc drives 5) Computer printers 6) X-Y plotters 7) ... ) Extruders 21) Engravers 22) Analytical and Medical instruments 23) Embroidery Machines 24) Packaging Machines

List different types of stepper motor. State one application of stepper motor.

Description : List different types of stepper motor. State one application of stepper motor.

Last Answer : Types of stepper motor : (i)Variable - reluctance motor (ii) Permanent- magnet motors (iii) Hybrid motors. Applications of stepper motor : In robotics, In CNC machines, In computers, printers, ... In Watches, In biomedical applications such as X-ray machines, CT scan, In Process control systems. 

applications of each: i) Universal motor ii) Stepper motor.

Description : applications of each: i) Universal motor ii) Stepper motor.

Last Answer : i) Applications of Universal motor: 1) portable drills 2) hair dryers 3) grinders 4) mixers 5) table-fans 6) blowers 7) polishers 8) Kitchen appliances  ii) Applications of Stepper motor ... 7) robotics 8) CNC machine 9) Control systems 10) Biomedical applications 10) XY recorder 11) plotters

Write two application of the following motor (i) AC servo motor (ii) Stepper motor

Description : Write two application of the following motor (i) AC servo motor (ii) Stepper motor

Last Answer : (i)Applications of AC Servo Motor: 1. Computers 2. Robotics and toys 3. CD/DVD players 4. Textile industries 5. Instrument servos 6. Tracking and guidance system 7. Self- ... Laser cutters 20.Extruders 21.Engravers 22.Analytical and Medical instruments 23.Embroidery Machines 24.Packeging Machines

A 3 stack stepper motor with 12 number of rotor teeth has a step angle of:

Description : A 3 stack stepper motor with 12 number of rotor teeth has a step angle of: (A) 12° (B) 8° (C) 24° (D) 10°

Last Answer : A 3 stack stepper motor with 12 number of rotor teeth has a step angle of: 10°

In a stepper motor the angular displacement:...

Description : In a stepper motor the angular displacement:  (A) can be precisely controlled (B) cannot be readily interfaced with micro computer based controller (C) cannot be precisely controlled. (D) cannot be used for positioning of work tables and tools in NC machines

Last Answer : In a stepper motor the angular displacement:  can be precisely controlled. 

stepper motor controller

Description : explain how a stepper motor is controlled using driver. give relevant hardware and software details.

Last Answer : A stepper motor is an electric motor that rotates fix number of degrees whenever we apply a step signal. the stepper motor can rotate 1.8-degree full step or ... driver 2. controlling a stepper motor directly Application of stepper motor: disk driversprintersphotocopyfax machinerobotscamcorder

Split phase induction motor

Description : Split phase induction motor

Last Answer : Split phase induction motor : There are two windings used in split phase induction motor. It is a type of single-phase induction motor. There are two winding one is called main winding and ... motor have low starting torque it is used for small fans, blowers, centrifugal pumps, grinders etc.

As compared to a split phase motor, a capacitor start motor has _____.

Description :  As compared to a split phase motor, a capacitor start motor has _____.

Last Answer :  As compared to a split phase motor, a capacitor start motor has higher starting torque.

The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated

Description : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor ... Hz supply is  (A) 58.5 A (B) 45.0 A (C) 42.7 A (D) 55.6 A

Last Answer : The locked rotor current in a 3-phase, star connected 15 , kW 4 , pole 230 V , 50 Hz induction motor at rated conditions is 50 A. Neglecting losses and magnetizing current, the approximate locked rotor line current drawn when the motor is connected to a 236 , V 57 Hz supply is 45.0 A 

In case of split phase motor, the phase shift between currents in the two windings is around

Description : In case of split phase motor, the phase shift between currents in the two windings is around  A) 30° B) 70° C) 90° D) 120°

Last Answer : In case of split phase motor, the phase shift between currents in the two windings is around  30°

The slip of 400 V, three phase, 4 -pole induction motor when rotating at 1440 rpm is

Description : The slip of 400 V, three phase, 4 -pole induction motor when rotating at 1440 rpm is 

Last Answer : The slip of 400 V, three phase, 4 -pole induction motor when rotating at 1440 rpm is 4 percent

A 400 V, 50 Hz three-phase induction motor rotates at 1440 rpm on full -load. The motor is wound for

Description : A 400 V, 50 Hz three-phase induction motor rotates at 1440 rpm on full -load. The motor is wound for

Last Answer : A 400 V, 50 Hz three-phase induction motor rotates at 1440 rpm on full -load. The motor is wound for 4 poles

In a split-phase induction motor, the resistance/reactance ratios of windings are such that

Description : In a split-phase induction motor, the resistance/reactance ratios of windings are such that (A) current in the auxiliary winding leads the current in the main winding (B) current in the ... (C) both windings develop the same starting torque (D) both windings develop high starting current

Last Answer : In a split-phase induction motor, the resistance/reactance ratios of windings are such that current in the auxiliary winding leads the current in the main winding

In a single-phase induction motor when the rotor is stationary and voltage is applied to the stator, then

Description : In a single-phase induction motor when the rotor is stationary and voltage is applied to the stator, then (A) the flux is constant (B) the flux first decreases and then increases in ... increases and decreases in the opposite direction with the same magnitude (D) current flows through the rotor

Last Answer : In a single-phase induction motor when the rotor is stationary and voltage is applied to the stator, then the flux first decreases and then increases in the same direction

A three-phase synchronous motor connected to ac mains is running at full load and unity power factor.

Description : A three-phase synchronous motor connected to ac mains is running at full load and unity power factor. lf its shaft load is reduced by half and field current is held constant then its new power factor will be

Last Answer : Leading

The starting winding of a single-phase motor is placed in?

Last Answer : The starting winding of a single-phase motor is placed in stator.