The correct proportioning of various ingredients of concrete largely
(a) Bulking of sand
(b) Water context
(c) Absorption
(d) All the above

1 Answer

Answer :

(d) All the above

Related questions

Description : Pick up the correct statement from the following: (A) The theory of formation of concrete is based on the phenomena of formation of voids (B) The bulking of sand is taken into account while ... sand and the sand completely flooded with water, have practically the same volume (D) All the above

Last Answer : Answer: Option D

Description : The following proportion of the ingredients of concrete mix, is not in conformation to arbitrary method of proportioning (A) 1 : 1 : 2 (B) 1 : 2 : 4 (C) 1 : 3 : 6 (D) 1 : 4 : 10

Last Answer : Answer: Option D

Description : The property of the ingredients to separate from each other while placing the concrete is called (A) Segregation (B) Compaction (C) Shrinkage (D) Bulking

Last Answer : Answer: Option A

Description : The ratio of various ingredients (cement, sand, aggregates) in concrete of grade M 200, is (A) 1 : 2 : 4 (B) 1 : 3 : 6 (C) 1 : 1½ : 3 (D) 1 : 1 : 2

Last Answer : (C) 1 : 1½ : 3

Description : If the various concrete ingredients i.e. cement, sand and aggregates are in the ratio of 1:3:6, the grade of concrete, is (A) M 100 (B) M 150 (C) M 200 (D) M 250

Last Answer : Answer: Option A

Description : Pick up the incorrect statement from the following: (A) Concrete for which preliminary tests are conducted, is called controlled concrete (B) Bulking of sand depends upon the fineness of grains (C) Concrete mix 1 : 6 : 12, is used for mass concrete in piers (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Last Answer : (D) All the above

Description : Proper proportioning of concrete, ensures (A) Desired strength and workability (B) Desired durability (C) Water tightness of the structure (D) All the above

Last Answer : Option D

Description : Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is ... the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Last Answer : Answer: Option D

Description : Which one of the following statements is correct? (a) Adding 5% to 6% of moisture by weight increases the volume of dry sand from 18% to 38% (b) The bulking of fine sand is more than that of coarse sand (c ) Volume of fully saturated sand is equal to that of dry sand (d) All of the above

Last Answer : (d) All of the above

Description : For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of ... C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Last Answer : Answer: Option D

Description : The ratio of differenct ingredients (cement, sand and aggregate) in concrete mix of grade M20 is. (a) 1:1:2 (b) 1:1.5:2 (c) 1:2:4 (d) 1:3:6

Last Answer : (b) 1:1.5:2

Description : If the depth of moist sand in a cylinder is 15 cm and the depth of the sand when fully inundated with water is 12 cm, the bulking of the moist sand, is (A) 10 % (B) 12 % (C) 15 % (D) 25%

Last Answer : Answer: Option D

Description : Bulking of sand is (A) Mixing of different sizes of sand particles (B) Mixing of lime with sand (C) Maximum water with sand (D) Swelling of sand when wetted

Last Answer : Answer: Option D

Description : Bulking of sand is maximum if moisture content is about (A) 2 % (B) 4 % (C) 6 % (D) 10 %

Last Answer : Answer: Option B

Description : Bulking of sand is caused due to (A) Surface moisture (B) Air voids (C) Viscosity (D) Clay contents

Last Answer : Answer: Option A

Description : With increase in moisture content, the bulking of sand (A) Increases (B) Decreases (C) First increases to a certain maximum value and then decreases (D) First decreases to a certain minimum value and then increases

Last Answer : Answer: Option C

Description : Bulking of sand takes place due to [ A ] Surface tension [ B ] Viscosity [ C ] Capillarity [ D ] None of the above

Last Answer : [ A ] Surface tension

Description : The property of fresh concrete, in which the water in the mix tends to rise to the surface while placing and compacting, is called (A) Segregation (B) Bleeding (C) Bulking (D) Creep

Last Answer : Answer: Option B

Description : The bulking of sand with 2% moisture content is about a) 5% b) 10% c) 15%* d) 20%

Last Answer : c) 15%*

Description : Define bulking of sand.

Last Answer : Bulking of sand is defined as increase in volume of given sand due to surface moisture present on surface of particles. 

Description : Index number expressing the relative sizes of both coarse and fine aggregates, is called (A) Proportioning of aggregates (B) Fineness modulus (C) Grading of aggregates (D) None of these

Last Answer : Answer: Option B

Description : Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Last Answer : Answer: Option D

Description : Pick up the incorrect statement from the following. While performing preliminary test on concrete (A) Proportions of the material and water should be the same as to be used at the work site (B) ... in air-tight containers (D) Concrete ingredients should be kept at a temperature of 37° 2°C

Last Answer : Answer: Option D

Description : Internal friction between the ingredients of concrete, is decreased by using (A) Less water (B) Fine aggregates (C) Rich mix (D) More water and coarse aggregates

Last Answer : Answer: Option D

Description : The internal friction between the ingredients to concrete is minimized by (a) Adopting coarse aggregates (b) Using more water (c) Reducing the surface area (d) All of these

Last Answer : (d) All of these

Description : Pick up the correct statement from the following: (A) Higher workability indicates unexpected increase in the moisture content (B) Higher workability indicates deficiency of sand (C) If the concrete mix is dry, the slump is zero (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The ... shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) Sand stones may be divided into calcareous, siliceous and ferruginous sand stones (B) Concrete using sand stones, cracks due to excessive shrinkage (C) Broken bricks produce a concrete having good fire resisting qualities (D) All the above

Last Answer : Answer: Option D

Description : The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known (A) Grading (B) Curing (C) Mixing (D) Batching

Last Answer : (D) Batching

Description : The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known as [ A ] Curing [ B ] Mixing [ C ] Grading [ D ] Batching

Last Answer : [ D ] Batching

Description : Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination ... and porosity of an aggregate influence the property of the concrete (D) All the above

Last Answer : Answer: Option D

Description : Which of the following operational problems relate to the functioning of rapid gravity filter ? 1. Inadequate media comprising filter bed 2. Sludge bulking 3. Mud balls 4. Negative head 5. Incrustation of media (a) 1, 3, 4 and 5 ... 2, 3 and 4 only (c) 2, 3, 4 and 5 only (d) 1, 2, 3, 4 and 5

Last Answer : (a) 1, 3, 4 and 5 only

Description : The degree of grinding of cement is called (a) Fineness (b) Soundness (c)Impact value (d) Bulking

Last Answer : (a) Fineness

Description : Pick out the wrong statement. (A) Cellulose acetate membranes are used in dialysis process (B) Elutriation process refers to when the soluble material is largely concentrated on the surface of an ... that various streamflow from one to another (D) Zirconia probe is used for the humidity measurement

Last Answer : (D) Zirconia probe is used for the humidity measurement

Description : Separation of water or water sand cement from a freshly concrete, is known (A) Bleeding (B) Creeping (C) Segregation (D) Flooding

Last Answer : Answer: Option A

Description : An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above

Last Answer : Answer: Option D

Description : Concrete gains strength due to (A) Chemical reaction of cement with sand and coarse aggregates (B) Evaporation of water from concrete (C) Hydration of cement (D) All the above

Last Answer : Answer: Option C

Description : Concrete gains strength due to [ A ] Chemical reaction of cement with sand and coarse aggregates [ B ] Evaporation of water from concrete [ C ] Hydration of cement [ D ] All the above

Last Answer : [ C ] Hydration of cement

Description : Which of the following represents a carpet of sand-bitumen mix without coarse aggregates? (A) Mastic asphalt (B) Sheet asphalt (C) Bituminous carpet (D) Bituminous concrete

Last Answer : Answer: Option B

Description : Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Last Answer : (D) Earth

Description : Which of the following surfaces will give highest rolling resistance for a rubber tyred vehicle? (A) Concrete (B) Loose sand (C) Asphalt (D) Firm earth

Last Answer : (B) Loose sand

Description : Grading of sand causes great variation in (A) Workability of concrete (B) Strength of concrete (C) Durability of concrete (D) All the above

Last Answer : (D) All the above

Description : Slump test is done for (A) Clay (B) Sand (C) Lime (D) Concrete

Last Answer : Answer: Option D

Description : When percentage of mica present in sand is large, it (a) Reduces the strength of mortar, or concrete (b) Increases the strength of mortar or concrete (c) Has no effect on mortar, or concrete strength (d) Enhances the strength of mortar, or concrete, but only marginally

Last Answer : (c) Has no effect on mortar, or concrete strength

Description : For reinforced concrete, the aggregate used is (a) Sand (b) Gravel (c) Crushed rock (d) All of these

Last Answer : (d) All of these

Description : 1. In the context of Indian wild life, what is the flying fox? 2. Who appoints the Chairman of the UPSC ? 3. Why is In a hydel station the motion produced in turbines? 4. Moon shaped sand ... ? 20. Who was elected as the President of All-India Khilafat Conference when it met at Delhi in 1919?

Last Answer : Answer : 1 1. Bat 2. President 3. Due to the flow of water 4. Barkhans 5. Badan Singh 6. Wasp 7. Anemometer 8. Echinodermata 9. Amazon 10. 1761 11. Preamble 12. KEVLAR 13. Industrialisation 14. Lake Superior 15. Lord Cornwallis 16. Music 17. Vectors 18. England 19. Arabian Sea 20. Mahatma Gandhi

Description : In context of net operating profit, which of the following statements are true? A. If all costs are variable, the amount of profit obtained in marginal costing and absorption costing will be same. B. If ... same in absorption costing and marginal costing. C. Both a and b D. None of the above

Last Answer : C. Both a and b

Description : Q.9. Study the ingredients of various food items. Do they have some common food ingredients? -Science

Last Answer : Yes, they have some common ingredients like: water, salt and oil or ghee.