Description : Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth
Last Answer : (D) Earth
Description : Coarse grained soils are best compacted by a (A) Drum roller (B) Rubber tyred roller (C) Sheep's foot roller (D) Vibratory roller
Last Answer : (D) Vibratory roller
Description : Which of the following represents a carpet of sand-bitumen mix without coarse aggregates? (A) Mastic asphalt (B) Sheet asphalt (C) Bituminous carpet (D) Bituminous concrete
Last Answer : Answer: Option B
Description : Which of the following is considered to be the highest quality construction in the group of black top pavements? (A) Mastic asphalt (B) Sheet asphalt (C) Bituminous carpet (D) Bituminous concrete
Last Answer : Answer: Option D
Description : Force ( including rolling resistance friction ) that acts upon the stabilising surfaces such landslide and sole of bottom are called a) Useful soil resistance b) Parasitic force d) Draft of implement. d) Pull of implement
Last Answer : b) Parasitic force
Description : For a properly designed vehicle, the resistance generally ignored, is (A) Wind resistance (B) Rolling resistance (C) Grade resistance (D) Axle resistance
Description : If the gross vehicle weight of a truck is 30 tonne and rolling resistance is 30 kg/tonne, then the tractive effort required to keep the truck moving at a uniform speed is (A) 30 kg (B) 300 kg (C) 900 kg (D) 1000 kg
Last Answer : (C) 900 kg
Description : The most suitable equipment for compacting clayey soils is a (A) Smooth wheeled roller (B) Pneumatic tyred roller (C) Sheep foot roller (D) Vibrator
Last Answer : Answer: Option C
Description : The coefficient of active earth pressure for a loose sand having an angle of internal friction of 30° is (A) 1/3 (B) 3 (C) 1 (D) 1/2
Last Answer : (A) 1/3
Description : The surface of a "desert pavement" is composed mainly of which of the following? w) loose sand x) sand and clay y) pebbles and boulders z) concrete and cement
Last Answer : ANSWER: Y -- PEBBLES AND BOULDERS
Description : Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw
Last Answer : (D) Screw
Description : For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100
Description : What would you rather choose, asphalt or concrete?
Last Answer : answer:For what? ? Welcome to Fluther! It helps to get answers if your question is specific.
Description : Why An asphalt sidewalk is warmer to the touch than a concrete sidewalk?
Last Answer : asphalt is usually is black, and the color black takes in and stores more heat rather than a concrete sidewalk because it has a lighter color.
Description : Tractive coefficient of a Crawler truck in loose soil is (a) Less than that of rubber tyre tractors (b) More than that of rubber tyre tractors (c) Same as that of rubber tyre tractors (d) Nearly zero
Last Answer : (d) Nearly zero
Description : If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is (A) 0.91 (B) 0.92 (C) 0.93 (D) 0.95
Last Answer : (D) 0.95
Description : For a loose sand sample and a dense sand sample consolidated to the same effective stress (A) Ultimate strength is same and also peak strength is same (B) Ultimate strength is different but peak strength ... of dense sand is greater than that of loose sand (D) Ultimate strength is same but peak
Last Answer : (C) Ultimate strength is same but peak strength of dense sand is greater than that of loose sand
Description : The angle of internal friction is maximum for (A) angular-grained loose sand (B) angular-grained dense sand (C) round-grained dense sand (D) round-grained loose sand
Description : The angle of internal friction, is least for (A) Angular-grained loose sand (B) Angular -grained dense sand (C) Round-grained loose sand (D) Clays
Description : Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above
Description : The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile
Description : The advantage of using dental floss over rubber point interdentally: A. Remove plaque and debris in interproximal surfaces B. Polish C. Massage of the interdental papillae D. Aid and recognise subgingivally
Last Answer : A. Remove plaque and debris in interproximal surfaces
Description : The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the ... (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above
Description : On most smooth hard surfaced roads, rolling resistance to moving vehicles, ranges from (A) 5 kg to 7 kg/tonne (B) 7 kg to 9 kg/tonne (C) 9 kg to 11 kg/tonne (D) 11 kg to 13 kg/tonne
Description : A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The ... will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne
Last Answer : (C) 40 kg/tonne
Description : A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance ... 200 kg (B) Increase by 200 kg (C) Increase by 250 kg (D) Reduce by 250 kg
Last Answer : (A) Reduce by 200 kg
Description : The maximum rimpull in the first gear of a tractor while towing a load is 6300 kg. The tractor weighs 12.5 tonnes and is operating along a 2 percent upgrade and the rolling resistance is 45 kg/tonne. Pull available for towing the load is (A) 3425 kg (B) 5515 kg (C) 4350 kg (D) 2975 kg
Last Answer : (B) 5515 kg
Description : Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above
Last Answer : (D) All the above
Description : The ratio of various ingredients (cement, sand, aggregates) in concrete of grade M 200, is (A) 1 : 2 : 4 (B) 1 : 3 : 6 (C) 1 : 1½ : 3 (D) 1 : 1 : 2
Last Answer : (C) 1 : 1½ : 3
Description : Grading of sand causes great variation in (A) Workability of concrete (B) Strength of concrete (C) Durability of concrete (D) All the above
Description : Separation of water or water sand cement from a freshly concrete, is known (A) Bleeding (B) Creeping (C) Segregation (D) Flooding
Last Answer : Answer: Option A
Description : Pick up the correct statement from the following: (A) Higher workability indicates unexpected increase in the moisture content (B) Higher workability indicates deficiency of sand (C) If the concrete mix is dry, the slump is zero (D) All the above
Description : Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The ... shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above
Description : Slump test is done for (A) Clay (B) Sand (C) Lime (D) Concrete
Description : An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above
Description : For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of ... C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates
Description : Pick up the incorrect statement from the following: (A) Concrete for which preliminary tests are conducted, is called controlled concrete (B) Bulking of sand depends upon the fineness of grains (C) Concrete mix 1 : 6 : 12, is used for mass concrete in piers (D) All the above
Description : Pick up the correct statement from the following: (A) Sand stones may be divided into calcareous, siliceous and ferruginous sand stones (B) Concrete using sand stones, cracks due to excessive shrinkage (C) Broken bricks produce a concrete having good fire resisting qualities (D) All the above
Description : If the various concrete ingredients i.e. cement, sand and aggregates are in the ratio of 1:3:6, the grade of concrete, is (A) M 100 (B) M 150 (C) M 200 (D) M 250
Description : Concrete gains strength due to (A) Chemical reaction of cement with sand and coarse aggregates (B) Evaporation of water from concrete (C) Hydration of cement (D) All the above
Description : Pick up the correct statement from the following: (A) The theory of formation of concrete is based on the phenomena of formation of voids (B) The bulking of sand is taken into account while ... sand and the sand completely flooded with water, have practically the same volume (D) All the above
Description : When percentage of mica present in sand is large, it (a) Reduces the strength of mortar, or concrete (b) Increases the strength of mortar or concrete (c) Has no effect on mortar, or concrete strength (d) Enhances the strength of mortar, or concrete, but only marginally
Last Answer : (c) Has no effect on mortar, or concrete strength
Description : The correct proportioning of various ingredients of concrete largely (a) Bulking of sand (b) Water context (c) Absorption (d) All the above
Last Answer : (d) All the above
Description : The ratio of differenct ingredients (cement, sand and aggregate) in concrete mix of grade M20 is. (a) 1:1:2 (b) 1:1.5:2 (c) 1:2:4 (d) 1:3:6
Last Answer : (b) 1:1.5:2
Description : For reinforced concrete, the aggregate used is (a) Sand (b) Gravel (c) Crushed rock (d) All of these
Last Answer : (d) All of these
Description : Concrete gains strength due to [ A ] Chemical reaction of cement with sand and coarse aggregates [ B ] Evaporation of water from concrete [ C ] Hydration of cement [ D ] All the above
Last Answer : [ C ] Hydration of cement
Description : Which of the following premix methods is used for base course? (A) Bituminous carpet (B) Mastic asphalt (C) Sheet asphalt (D) Bituminous bound macadam
Description : The suitable surfacing material for a bridge deck slab is (A) Sheet asphalt (B) Bituminous carpet (C) Mastic asphalt (D) Rolled asphalt
Description : Mastic asphalt is (A) Acid resisting material (B) Non-corrosive material (C) Corrosive material (D) Heating-resisting material
Description : Mastic asphalt is generally used for (A) Damp proof course (B) Water proof layer (C) Partition walls (D) Both (A) and (B